PROVISION OF RAIN PROTECTION SHED FOR BLDG NO 73,74,75 MD OFFRS ACCN AT QUEENS GARDEN , ADDN ALTERATION TO TOILET BLOCK OF BLDG NO 3 ABNS,CDO WING OF HQ JL WING,THE INF SCHOOL, BELGAUM PROVN OF PARKING SHED TWO WHEELER NEAR BLDG NO 34 35 NO 01 DEM

Amount

Excavation in post holes each n. exc. 0.5 Cum getting out in hard/dense soil, returning, filling in and ramming earth or broke rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surface complete all as specified and as directed.

Materilal and labour for Plain cement concrete 1:3:6, type C2 using 40 mm graded stone aggregate in foundations filling and mass concrete complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in roof covering completec all as specified and as directed . Note : Make of galvalume sheet : TATA BLUE SCOPE /LLOYD INDUSTRIES/JSW (COLOURON)

Supply and fix Rolled Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed .

Supply and fix Mild steel section for hold fasts, wind ties etc for roof including securing bolts and cutting tops to shape as directed and all necessary drilling ,bolting or rivetting etc confirming to Gde Fe 290 (Gde-E-165 ) complete all as specified and as directed.

Material and labour for Preparation of newsteel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m depth in hard/dense soil up to top of drain pipe / foundation for parking shed/drain etc complete all as specified and as directed.

Material and labour for Plain cement concrete 1:4:8 , Type D2 ( using40 mm graded stone aggregate), in foundations, filling and mass-concrete complete all as specified and as directed.

Material and labour for Plain cement concrete 1:4:8 type D-2 ( using40mm graded stone aggregate) to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested etc for 150mm bore of SGSW pipe line, jointed in cement mortar complete all as specified and as directed.

Material and labour for Salt-glazed stoneware drain pipes laid in trenches and jointed of 150 mm internal dia complete all as specified and as directed.

Material and labour for Precast cement concrete block masonry in cement concrete blocks in PCC 1:3:6 type C1 ( using 20mm graded stone aggregate) set in cement mortar CM 1:6 complete all as specified and as directed.

Material and labour for Providing cement concrete 1:2:4 type B1 ( using 20mm grade stone aggregate) in coping / kerb stone set in cement mortar 1:4 including necessary form work complete all as specified and as directed.

Material and labour for Rendering 15mm thick on fair faces of brick/block masonry work in CM 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.Note : Water proofing

Material and labour for Rendering 15mm thick other than fair faces of brick/block masonry work in CM 1:6 and finished even and smooth using extra cement complete all as specified and as directed.

Returning filling in including spreading, leveling, watering in layers n. exc. 15cm thick in soil complete all as specified and as directed.

Removing excavated soil n. exc. 50m and depositing where directed at a level n. exc. 1.5m above starting point complete all as specified and as directed.

Material and labour for Cutting into exiting manholes for connecting new drains , making good to pipe and rendering, cutting out existing benching (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of debris off the premises and serviceable items taken as credit complete all as specified and as directed

Material and labour for Cutting holes into or through stone walls built in in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required of superficial area ex 150 sq. cm but n exc 400 sq. cm complete all as specified and as directed

Dismantling wall or ceiling boards or insulation boards/ slabs any thickness including cover fillets and taken as credit complete all as specified and as directed

Material and labour for High pressure steam cured (HPSC) non asbestos fibre cement building board 4mm thick in false ceiling fixed with aluminum anodized snap grid of 60x60cm in ceiling with Tee section 35x25x1.25mm, L angle section25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling board complete all as specified and as directed . Note : (i) Make of HPSC Board : EVEREST / (ii) Thickness of aluminium anodisation shall be of 15 microns . .

Taking down cement plaster on brick or stone walls built in cement mortar and removal of debris off the premises complete all as specified and as directed .

Material and labour for Rendering 10mm thick in CM 1:6 on stone masonry surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

Supply only water proofing compound.Make :Impermo/Cico/Roff

Material and labour for Preparation of newly plastered surfaces and applying two coat of oil bound distemper over a coat of alkali resistant primer and 1mm thick wall case putty complete all as specified and directed. Note :(i) Make of wall care putty : J K Birla/

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of water based primer complete all as specified and as directed. Make : (Apex ultima - Asian paint)

Material and labour for Complete removal of existing treatment on wall with wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots and applying two coats of Oil Bound Distemper over a coat of primer and a 1mm thick wall care puty complete all as specified and as directed .Note :(i) Make of wall care putty : J K Birla/

Material and labour for Complete removal of old plastered/unplasterd surfaces of walls and brooming down and appyling two coats of exterior emulsion paint over a coat of water basedprimer complete all as specified and as directed. Make : (Apex ultima - Asian paint)

Material and labour for Demolition of cement concrete in ground floors n exc 15cm thick unreinforced ,above or below ground level and removal of debris off the premises complete all as specified and as directed

Material and labour for Plain cement concrete type C2 1:3:6 (using 40 mm graded stone aggregate )75 mm thick as in plinth protection and finishing the cement concrete surface even and smooth without using extra cement including necessary form work complete all as specified and as directed.

Material and labour for Plain cement concrete type B-1, 1:2:4 ( using20mm graded stone aggregate) 25mm thick sub base of floor as in level course complete all as specified and as directed.

Material and labour for Premium quality Non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Material and labour for Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing)and removal of rubbish off the premises complete all as specified and as directed.

Material and labour for Premium quality Coloured Glazed ceramic tiles in vertical surface 450x 350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured in skirting/dado over and including rendering 10 mm thick in CM 1:4 on brick masonry walls as in backing coat of skirting, dado etccomplete all as specified and as directed .

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid dry and pointed and removal of rubbish off the premises complete all as specified and as directed.

Material and labour for 20 mm thick Granite slab , machine cut (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/ wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and labour for 20mm thick Granite slab machine cut in dado or skirting bedded and jointed with grey cement slurry and pointed with white cement admixture of pigments to match the shade of granite stone including grinding and polishing complete including backing coat in cement mortar 1:4, 10mm thick, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 75 mm thick Plain cement concrete 1:4:8 type D2, ( using40 mm graded stone aggregate ) as in sub base/levelling course complete all as specified and as directed.

Material and labour for Rubber coated chequered cement concrete tiles of size 30cm x 30cmx 25mm thick, with grey cement and pigments, with glossy finished on top in floors , set , jointed and pointed in neat cement slurry laid over and including 15mm thick screed bed in cement mortar 1:6, etc. complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking colour paver block of 55 - 60mm thick , M-35 grade , any shape and size with glossy finish on top confirming to IS 15658-2006 with grey cement complete all as specified and as directed.

Material and labour for 50mm thick sand cushion under interlocking paver blocks including watering and consolidation, complete all as specified and as directed.

Taking down chowkats with shutters exc 1.50 sqm but n exc 4 sqm each (without taking off shutters from the frame) and taken as credit complete all as specified and as directed.

Taking down chowkats with shutters n exc 1.50 sqm each (without taking off shutters from the frame) and taken as credit complete all as specified and as directed.

Supply and fix Aluminium frame work as in doors, partitions and windows/Ventilators using powder coated aluminium sections including provision of joining cleats , glazing clips, hinges, handles, etc complete all as specified and as directed. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted by the contractor shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (iii) Particle board/ glass panels shall be measured and paid separately.(iv) Thickness of powder coating shall be of 50 micron . (v) Make of Aluminium section :Jindal/Hindalco/Indal

Supply and fix MS butt hinges cold rolled medium weight of 100mm size complete all as per specified and as directed. Make : Crown/Classic/Adarsh

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long all as specified and directed. Make : Crown/Classic/Adarsh

Supply and fix 5.5mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed. Make :Saint gobain/Modi guard/Gold fish

Supply and fix 5.5mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and as directed. Make :Saint gobain/Modi guard/Gold fish

Taking up or down steel tubing and connections 15mm dia bore of pipe and taken as credit complete all as specified and as directed.

All as per item No 50 here in before but 20mm dia bore of pipe.

Material and labour for Cutting, chases for concealed water tubing and making good in CM 1:3 and cutting not exceeding 10 cm girth in stone concrete block or slab wall complete all as specified and as directed.

Supply and fix Unplasticised PVC pipes of pressure rating 10 kgf/cm2 of pipe 15mm bore fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.Make :Finolex/Supreme

Description all as in item No 53 here in before, but 20mm.bore

S&F in repairs cascade type vitreous china wash down water closet pan (pedestal pattern), white, floor mounted with flushing cistern including 'P' or 'S' trap, seat and cover, fixing bolts etc, connecting to drain pipe and flushing pipe all as specified and as directed. Make:- INDUS model of PARRYWARE or eqivalent modein Jaguar /Hindware

Supply and fix PVC connections 15 mm size with PTMT nuts of 600mm length complete all as specified and as directed.Make :Prayag/M/S Shakthi Industries

Supply and fix PVC connections 15 mm size with PTMT nuts of 450mm length complete all as specified and as directed.Make :Prayag/M/S Shakthi Industries

Supply and fix in repairs Corner glass shelf, 5mm thick, 9" wide, fixed with suitable CP mild steel brackets, nuts and bolts complete all as specified and as directed. Make: Jaguar /Hindware /Parryware

Supply and fix Pedestal type wash basin Vitreous China of size 550 x 450 mm including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed. Make: Jaguar /Hindware /Parryware

Supply and fix in repairs Pillar taps fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make: JAQUAR/ JOHNSON/ ESS ESS

Supply and fix Brass, chromium plated toilet paper holder fixed to wall with chromium plated brass screws complete all as specified and as directed.Make: Cat No.ACN 1151N of JAQUAR or equivalent model in Hindware/Parryware.

Supply and fix Soap dish, any type, fixed with plugs with chromium plated brass screws (for Baths of 3 cubical in each toilets) complete all as specified and as directed. Make: JAQUAR/ JOHNSON/ ESS ESS.

Supply and fix Brass chromium plated Tubular towel rod of length 600 mm , , fixed to walls with plugs and chromium plated brass screws complete all as specified and as directed. Make: Cat No. CAN-CHR-1111N of JAGUAR or equivalent model in JOHNSON/ ESS ESS.

Supply and fix in repairs 15mm bore bib taps, fancy type, brass CP, screwed for iron pipe or for brass ferrule and fixed to wall with wall flange complete all as specified and as directed. Make: Cat No. ORP-10037 PM of JAQUAR or equivalent model in PARRY WARE/ JOHNSON

Supply and fix Health faucet , brass chromium plated with 1m long flexible PVC tube and wall hook complete all as specified and as directed. Make: Cat No. 563 of JAQUAR or equivalent model in Johnson/ Parryware

Supply and fix 15 mm bore 2 way Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed. Make: JAQUAR or equivalent model in JOHNSON/ PARRYWARE

Supply and fix PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet complete all as specified and directed. Make: Finolex/Supreme

Supply and fix Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms) for WHB complete all as specified and directed.

Supply and fix 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches including dismantling of old damaged existing PVC(SWR) pipe line of any description and taken as credit complete all as specified and directed. Note : Make of PVC(SWR) pipe :Finolex/Supreme

Demolition/breaking up or down PVC /AC/CI/Cement drain pipe any size fixed in any position set in cement mortar including removal of debris off the premises complete all as specified and directed.

Supply and fix 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Note : Make of PVC(SWR) pipe :Finolex/Supreme

Supply and fix 110 mm dia PVC (SWR) bends any radius complete all as specified and directed. Note : Make of PVC(SWR) bend :Finolex/Supreme

Supply and fix 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Note : Make of PVC(SWR) pipe :Finolex/Supreme

Supply and fix 75 mm dia PVC (SWR) bends any radius complete all as specified and directed. Note : Make of PVC(SWR) bend :Finolex/Supreme

Material and labour for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement Supply and fix 110 mm dia PVC (SWR) bends any radius complete all as specified and directed. Note : Make of PVC(SWR) gully trap :Finolex/Supreme

Supply and fix 110 mm dia PVC (SWR) vent cowl complete all as specified and directed. Note : Make of PVC(SWR) vent cowl :Finolex/Supreme

Dismantling of water tank and accessories and taken as credit of capacity exc 500ltr & n exc 1000 ltr complete all as specified and directed.

Supply and fix Rotational moulded PVC water storage tank ,double layered (cylinderical vertical with closed top ) hoisted and fixed in position of capacity 1000 ltrs and provision of 20 mm bore dia ball valves ,high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(Minimum weight of 20 mm bore Ball valve :210gms ) complete all as specified and directed. Note : Make of PVC Tank ::Sintex /Polycon/Vectus . Make of Ball PTMT Valve :Prayag/M/S Shakthi industries

Supply and fix Grating square 150 mm size of PTMT PVC grating (Paryag) (Minimum weight :100 gms) complete all as specified and directed. Note : Make of PTMT grating :Prayag/M/S Shakthi industries

Supply and fix in repair Harrison curtain rails, mild steel chromium plated with fixing brackets, stops and rollers etc as approved by GE complete all as specified and as directed.

Supply and fix in repair Brass Knob , 35 to 40mm dia for curtain rod complete all as specified and as directed.

Material and labour for Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply and fix Aluminium anodized sliding window / ventilator (double track) standard section of size 92 x 31.75 x 1.6 mm for bottom track, section of size 92 x 31.75x 1.4 mm for side and top frame, section of size 39 x 17 x 1.4 mm for top and bottom shutter rail, section of size 39 x 17 x 1.4 mm for outer style, section of size 39 x 27x 1.4 mm for inter lock style including fabrication to required size and fixed with 3 mm sheet glass oridinary quality, glazing, and rubber gas cut including fitting etc with roller suitable spring catcher heavy duty, handle and locking arrangement complete all as specified and as directed. Notes: (i) The rate quoted by the contractor shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (ii) Thickness of anodisation shall be of 15 micron . (iii) Make of Aluminium section : :Jindal/Hindalco/Indal

Supply and fix Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, over all length of cover plate 150mm complete all as specified and as directed. Make :Classic/Crown/Atul/Adarsh

Supply and fix Aluminium ( Die cast body) door closer hydraulically regulated, designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and fixed complete all as specified and as directed.Make :Everite/Hardwyn

Supply and fix Aluminium mortice lock vertical type , size 100mm, 4 levers complete all as specified and as directed.Make :Godrej/Harrison/Dhanraj

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out inany type of soil complete all as specified and as directed.

Material and labour for hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfaces complete all as specified and as directed.

Supply and fix Rolled mild steel angle section for roof trusses(framed),trussed and purlins including distance pieces, cleats etc confirming to Gde Fe 410-W (Gde-E-250 quality - A) complete all as specified and as directed.

Material and labour for Preparation of steel surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for Preparation of newly plasteredsurfaces of any description and applying two coats of cement paint white or tinted paint on walls. Over a coat of alkali resistent primer complete all as specified and as directed.

Material and labour for Plain cement concrete type B-1 1:2:4 (20mm graded aggregate) 40mm thick in flooring finished even and smooth without using extra cement including necessary form work complete all as specified and as directed.

Material and labour for Glass dividing strips 3 mm thick width of strips 38mm and inserted in position to confirm to design complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking colour paver block 80 mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 with grey cement M-35 grade complete all as specified and as directed

Material and labour for PCC 1:2:4 type B2 using 20 mm graded aggregate as in surface channel/ benching inside the manhole Complete all as specified and as directed.

Material and labour for forming fair finished surface channel of inner girth n exc 30 cm in cement concrete using extra cement including forms/moulds/mitred/stopped ends Complete all as specified and as directed..

Material and labour for Precast reinforced cement concrete manholes cover in 1:2:4 type B-1 using 20mm graded stone aggregate set and jointed in CM 1:6 Complete all as specified and as directed.

Material and labour for loose filling with broken bricks aggregates of gauge 80 to 150mm in soakage pits compelete all as specified and as directed

Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Complete all as spd and as directed.

All as per item no :97 here in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders Complete all as specified and as directed.

Material and labour for 110mm PVC (SWR)pipes laid in trenches and jointed in CM 1:3 complete with collar inclding demolition and breaking up of PCC and existing PVC drain pipes jointed in cement mortar and taking out from trenches and removal of debris off the premises Complete all as specified and as directed..

Material and labour for PCC 1:4:8 type D-2 (using 40mm graded aggregate) bed to drain pipes including packing under & haunching against the side of pipe after they are laid and tested for 110mm bore of PVC pipe complete all as specified and as directed.

M/s. KIRAN M CHOUGULE

SHRI.H.R.PATIL

M/s B C CHOUGULE

M G KANADIKAR ENGINEERS AND CONTRACTORS

M/S MAHADEV M PATIL

Vinod Enterprises

M/s. VIJAY ELECTRICALS

N K CONSTRUCTION