PROVN OF MARRIED ACCN FOR 12 X OFFRS, 16 X JCOs 56 ORs AT BHARATPUR

Amount

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "ROAD, PATH AND CULVERT etc." as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES

Lump sum price worked out by the contractor for "RAIN WATER HARVESTING" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES

Lump sum price worked out by the contractor for "REFUSE BIN" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES

Lump sum price worked out by the contractor for " EXCAVATION & EARTH WORK " as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Sch 'A' Sec-XII (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under SCH A PART-XI (Excavation and earthwork schedule).

INTERNAL WATER SUPPLY

S&F brass CP health faucet 1.20m chain suitable for 15mm bore fittings complete all as specified and as directed.

MODULAR KITCHEN (FOR MAJ AND ABOVE QUARTERS):

S &F 18mm thick solid UPVC ply of first quality of one side prelaminated of approved colour and one side white colour fixed with screw 'solvent cement/adhesive to make kitchen cabinet and cupboard shutter complete all as specified and directed.Make : Rajshree/Sintex/Duraplast.

S &F 18mm thick solid UPVC ply of first quality of one side prelaminated of approved colour and one side white colour fixed with screw 'solvent cement/adhesive to make kitchen cabinet side , top and bottom shelves inside the cabinet and shutter and drawer complete all as specified and directed.Make : Rajshree/Sintex.

S &F 18mm thick solid UPVC ply of first quality of one side prelaminated of approved colour and one side white colour fixed with screw 'solvent cement/adhesive to make shelves, partitions and drawers etc kitchen cabinet and cupboards complete all as specified and directed.Make : Rajshree/Sintex.

S &F stainless steel (SS-204)cup saucer basket of size 19"X20"X4" as per approved sample complete all as specified and directed.Make : Ultrafresh/kitchen gold or equivalent.

S &F stainless steel (SS-204) tall basket of size 8"X19"X20" as per approved sample complete all as specified and directed.Make : Ultrafresh/kitchen gold or equivalent.

S &F stainless steel (SS-204) plate basket of size 19"X20"X6" as per approved sample complete all as specified and directed.Make : Ultrafresh/kitchen gold or equivalent.

S &F stainless steel (SS-204)cutlry basket of size 21"X20"X4" as per approved sample complete all as specified and directed.Make : Ultrafresh/kitchen gold or equivalent.

S & F sliding telescopic channel high grade mild steel, bright finishor electrogalvanised of size 20" as per approved sample complete all as specified and directed.

S & F stainless steel handle of 110mm size of best quality as per approved sample complete all as specified and directed.

S & F magnet catch for kitchen cabinet shutter as per approved sample complete all as specified and directed.

S & F soft closing hinges O 'degree' high grade mild steel or electrogalvanised as per approved sample for kitchen cupboard shutters complete all as specified and directed.

S & F colour powder coated mild steel continuous piano hinges width of flap when open is 40mm complete all as specified and directed

INTERNAL ELECTRIFICATION:

S&F 18W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

S&F 25W LED Street light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 100 lumen/W, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP-66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket arm OD 35 mm to 42mm including necessary electrical connection to the fixture with 3 core flexible Copper conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed.

S&F 05 W surface/ceiling mounting LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W,>6500K, thoughtfully designed with sleek and seamless aesthetics, white powder coated housing and front cover in CRCA sheet, high efficiency transclucent (HET) diffuser for better light trasmisssion, high efficancy LEDs and high performance driver, ideal for green lighting solution, suitable for modular ceilings for installation in POP/flase ceiling having input voltage 220- 240V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

S&F 10W LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W,>6500K, thoughtfully designed with sleek and seamless aesthetics, white powder coated housing and front cover in CRCA sheet, high efficiency transclucent (HET) diffuser for better light trasmisssion, high efficancy LEDs and high performance driver, ideal for green lighting solution, suitable for modular ceilings for installation in POP/flase ceiling having input voltage 220- 240V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

S&F 10 W mirror light of wall mounted LED batten having high efficiency long life LED chips with luminous efficancy of > 100 lumen/W, independet isolated SMPS based constant current electronic LED diriver with THD <20%, surge voltage protection and other safety tests as per IS:15885 (Part-2/Sec-13) : 2012, plycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220-240 V, inputfrequency 50-60 Hz, PF > 0.95, including electrical connection with 3 core flexible Copper conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

Supply and fix rigid PVC conduit, 20 mm dia, with fittings / accessories all fixed concealed in walls/ceiling, (as per P&T standard) for telephone connection and TV wire.

S&F modular RJ11 for telephone socket tools less complete with mild steel sunken boxes with earth dolly zinc coated and including mounting frame & over cover plate.

S&F modular TV socket complete with mild steel sunken boxes with earth dolly zinc coated and including mounting frame and over cover plate all as specified and directed.

S&F telephone switch board cable of size 0.5mm ATC PCV insulated all complete all as specified and directed.

S&F TV socket cable solid annealed copper conductor, JF, aluminium foiled and aluminium wire braided, RJ - 11 (foam) complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with wireless remote complete all as specified and directed.

S&F engery efficient metalic body exhaust fan having blade sweep 300mm, air delivery not less than 900 cum/h, operating voltage 220-240V and frequency 50 Hz, including electrical connection with 3 core flexible copper conductor cable of appropriate size from ceiling rose to the fresh-air fan and making necessary hole in wall and make good to finish surface complete all as specified and directed.

S&F BEE five star ventilating fan having 250 mm square size blade sweep, air-delivery not less than 900 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed.

S&F ISI marked MCB for AC supply till 63 A, having breaking capacity Icn = 10 kA, conforming to IS/IEC 60898-1-2002, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters,for following all complete as specifed and directed.

6-32A, SP MCB, C-curve

6-32A, SPN MCB, C-curve

25A, TP MCB, C- curve

25A, TPN MCB, C-curve

63A, TPN MCB, C - curve

S&F 100A, 16KA, MCCB, TPN, 415 Volts, thermal magnetic release, Ics = 100% Icu

Supply,installation testing and commissioning of Electric chimney 90cm with wave sensor,smoke sensor,gas sensor,temp display ,auto glass opening ,big LED lights ,auto clean,oil collector cup,timer, 3 speed motor 1400 Cum/hour suction power stainless steel body and heavy duty copper motor complete all as specified and directed. Make :- Surya/Faber/Hindware/Glen

S&F 20 W decorative light of surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficancy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED diriver with THD <20%, surge voltage protection and other safety tests as per IS:15885 (Part-2/Sec-13) : 2012, plycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220-240 V, inputfrequency 50-60 Hz, PF > 0.95, including electrical connection with 3 core flexible Copper conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

Supply and fixing of Electric storage water heater of 25 liter capacity whirl flow technology 2000W rated power 5 star rating, energy saving, high density PUF insulation 8 Bar pressure, heating indicator, adjustable knob for mannual setting of temp, safety valve, horizontal mounting including wall mounting fastner bolts 04 Nos and 02 flexi connecting pipe of length upto 60cmPRCD plug (shock safe) complete. Make: Havells Monza Slim Product code:GHWHCFSWH025 or equivant in Bajaj/Indoasian.

EXTERNAL WATER SUPPLY

M&L for ductile iron fitting such as bends (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 250mm dia complete all as specified and directed.

Material and Labour for CI fittings/specials such as Tees, bends (any type, radius and angle ) tapers any type, collars,tail pieces,caps and plugs up to 250 mm bore confirming to IS: 1538-1993 complete all as specified and directed by Engineer - in - Charge.

M&L for MS connecting pieces both ends flanged and other end reducers/bell mouth pieces, bends, blanking plate, tapers any type and radius and angle, tee pieces, single branch, 'Y' junction, double branch, both end flanged including welding to reqd length and sizes of bends, tees, flanges, nuts,bolts and washers, rubber gasket etc for provn of water pressure haed ( Header) incl lathe work finishing and painting with approved paint of 2 coat incl red oxide primer coat, all ends socket, all end flanged of size upto 300mm made out of MS plate suitable thk confirming to Fe 410-0 or Fe -310-0 complete all as specified and as directed .

Supplying and fixing, MS flanges not less than 16 mm thick duly welded on ends of MS pipe. Flange sizes are as under all as specified and directed by Engineer-in-charge :-

100 mm bore

200 mm bore

Supply and fix non return ball valve, reflux, with by-pass Arrangement,following sizes

(a) 100 mm bore

(b) 200 mm bore

Supply and fix CI body Foot ball valve conforming to IS 4038, 100 mm (4”) dia.

Supply and fix Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 50 mm dia bore and fixing up in Cast Iron Water supply mains of size 200 mm dia.

Supply and fix Pressure gauge 100 mm dia with ball valve of pressure 25 Kg/Sqcm

Supply, installation and testing of flanged ends Water Meter ISI marked woltman type, Class 'B' of following sizes and making good connection with flanged ends, with gasket rubber sheet, nuts & bolts fixing in horizontal/inclind/vertical position complete all as specified and directed at site by the Engineer-in-Charge. Note :- Flange joints including jointing materials shall deemed to be included in the unit rate of this item.

(i) 100 mm bore

(ii) 200 mm bore

S & F including testing self primining centrifugal type pump set, available head - minimum 45 Mtr, flow rate 1200LPM, suction X delivery line -100mm X 80mm, bronze impeller , cast iron body of induction motor of minimum capacity 15 HP complete with necessary foundation made out of 100 medium channel with suitable nut bol and PCC 1:2:4 foundation of suitable size block and arrangemen, complete all as specified and directed. Make: Kirloskar / CG/CRI

S&F copper cable weather proof with multi-stranded copper conductor 3 core of size 6 sqmm 1100 volts grade heavy duty including all accessories for connection pump from panel board, testing and commissioning complete

M & L for construction of valve chamber and brick masanary in CM 1:6 of size 90cm x 90cm x 100cm (internal dinentions) with 15cm thick PCC foundation in PCC 1:4:8 type D2 using (40mm graded stone agreegate) 15mm thick plaster in cm 1:6, 3mm thick MS sheet cover including 40 x 40 x 6mm MS angle iron frame fixed in PCC coping, using PCC 1:2:4 type B1 (using 20mm graded stone agreegate) with necessary locking arrangement and pointed with two coats of synthetic enamel paint over a coat of redoxide primer on all exposed surfaces including necessary excavation and earth work in any type soil returning and filling in and ramming and removal of surplus soil upto a distance not exc 50 mtr.

Out going- (a) MCCB 4 Pole, 415 V, Thermal Magnetic release, Adjustable type, rating-63 A with 25 KA rapturing capacity - 03 No. (b) MCCB 4 Pole, 415 V,Thermal Magnetic release, Adjustable type,rating-40 A with 25kA rapturing capacity -01 No (c) Star-Delta starter fully automatic for minimum 15 HP pump set of Havell/L&T- 01 No Note: (i) Drawings of LT panel shall be got approved by GE before Manufacture. (ii) The same should be fixed in PCC below ground level 15cm and above ground level 10cm.

EXTERNAL ELECTRIC SUPPLY

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine for laying under ground pipe up 150mm dia complete Note :- GI pipe shall be measured and paid in concern Item

Supply , install, testing and commissioning of indoor type HT vacuum circuit breakers panel having 1 No Incoming VCB & 02 Nos Out going VCBs HT 11 KV. 3 phase 50 Hz, indoor type,totally enclosed metal clad switchgear complete with Vacuum Circuit Breaker having rupturing capacity 350 MVA,overload and earth fault protection,ammeter, voltmeter and bus bar of rating upto 1000 Amp having 26.3 KA breaking capacity, all specified as per IEC 62271-100 & IEC 62271-200 totally enclosed single bus bar for each phase, floor mounting, metal clad, flush fronted, horizontal draw out type, horizontal. isolation type, Indoor extensible type, with Electrical and Mechanical interlock and automatic safety shutter gear including padlocking arrangement, isolation plugs, assembly of 3 vacuum interrupters, with epoxy support insulations and self - aligning finger type isolating contacts, truck having integral racking with necessary interlocks ( for insertion and withdrawal of VCB), manual and automatic motor charged independent closing/ tripping spring , trip free operating mechanism with closing and tripping push buttons and mechanical breaker , all standard fitting and accessories of following :- SPECIFICATION FOR VCB:- (a) Bus bar chamber with 3 phase copper bus bar 1000 Amp rating duly insulated - 01 Set ( set of three).

(b) Electrical trip coil 30 V DC /110V DC - 1 No (c) Electrical shunt coil 30 V DC/110VDC - 01 No (d) CT Chamber incorporating 3 Nos single phase rasin cast current transformer ratio 200/100/5-5 class 1.0 for metering & class 5P10 for protection and burdon 15 VA , 11 KV, 25 KA for 1 sec - 1 No (e) 3 Phase, 3 Limb draw out type bus connected Epoxy potential transformer, ratio 11KV/√3/110V/√3 AC accuracy 1.0, burdon 50 VA - 01 No. (f) Digital ammeter for 3 phase -01 No. (g) Digital voltmeter for 3 phase - 01 No (h) DIGITAL Load manager for amps, volts, KW, KVA, KVAR, and PF Make :Conserve EM 6400 or Make: Secure Ellite 443 - 01 No (j)Three phase over current and earth fault digital numeric relay (over current (INST 50) & IDMT - 51 - 3 pole & earth fault (INST (50N) & INST (50N) & IDMT 51N - single pole) & negative sequence 46 auxiliary supply 20-110V AC/DC CT out put contacts 2 Nos + NC, rating-5, O/C Is= 20-200% in step of 5% E/F Os=5-80% in step of 5%. with common port ,the features and specification confirming to model No. MI COM P 122 of AREVA or equivalent Make of ABB -REJ601 or Seimen 7SR10. (k) Auxiliary relay with 6 N/O & 6 N/C Make Alstom/ABB/L&T - 1No (l) Master trip circuit Make Alstom/ABB/L&T- 1No

(m) TNC switch and LR switch - 1No (n) Heat control switch - 1 No (o) RYB, ON/Off , spring charred and discharged & VCB trip indications- 1 set (p) Space heater with thermo state & toggle switch - 1 No (q) Operating counter - 1 No (r) Rear and side cable box suitable for 95/ 120 Sq.mm 3 core XLPE cable (s) Spring charging motor with starter 230V AC - 1 No (t) Pluggable anti-pumping relay type CRM 4 with base- 1No (u) Pluggable AC fail relay type CRM 4 with base -1 No (v) Pluggable DC fail relay type CRM 4 with base -1 No (w) CB contact multifunction relay type PSU14(52X) -1No (x) 12W Annunciator + hooter- 1 set (y) Power pack 230V AC-110V DC (z) Control MCB/ Fuse set - 1set (aa) Panel illumination lamp with door limit switch - 1set (ab) Push button for TCH - 1 No (ac) 9 KV , 10 KA , surge arrestor - 1 set of three (ad) Indicating lamp - 1 set (ae) online UPS of 1500VA ( min cap) with 02 Nos of 12V,200AH maintenance free battery,complete connect with VCB AC/DC supply NOTES :- (i) VCB shall be extensible type. (ii). The contractor shall get the approval of GE for the make of the VCBs then plan to procure. (iii). Prior to manufacturing the general arrangement drawing design details of the VCB panel shall be got approved by GE.

Supply , install, testing and commissioning of indoor type HT vacuum circuit breakers panel having 02 Nos Out going VCBs HT 11 KV. 3 phase 50 Hz, indoor type,totally enclosed metal clad switchgear complete with Vacuum Circuit Breaker having rupturing capacity 350 MVA,overload and earth fault protection,ammeter, voltmeter and of rating upto 1000 Amp having 26.3 KA breaking capacity, all specified as per IEC 62271-100 & IEC 62271-200 totally enclosed single bus bar for each phase, floor mounting, metal clad, flush fronted, horizontal draw out type, horizontal. isolation type, Indoor extensible type, with Electrical and Mechanical interlock and automatic safety shutter gear including padlocking arrangement, isolation plugs, assembly of 3 vacuum interrupters, with epoxy support insulations and self - aligning finger type isolating contacts, truck having integral racking with necessary interlocks ( for insertion and withdrawal of VCB), manual and automatic motor charged independent closing/ tripping spring , trip free operating mechanism with closing and tripping push buttons and mechanical breaker , all standard fitting and accessories of following :- SPECIFICATION FOR VCB:- (a) Bus bar chamber with 3 phase copper bus bar 1000 Amp rating duly insulated - 01 Set ( set of three). (b) Electrical trip coil 30 V DC /110V DC - 1 No

(c) Electrical shunt coil 30 V DC/110VDC - 01 No (d) CT Chamber incorporating 3 Nos single phase rasin cast current transformer ratio 200/100/5-5 class 1.0 for metering & class 5P10 for protection and burdon 15 VA , 11 KV, 25 KA for 1 sec - 1 No (e) 3 Phase, 3 Limb draw out type bus connected Epoxy potential transformer, ratio 11KV/√3/110V/√3 AC accuracy 1.0, burdon 50 VA - 01 No. (f) Digital ammeter for 3 phase -01 No. (g) Digital voltmeter for 3 phase - 01 No (h) DIGITAL Load manager for amps, volts, KW, KVA, KVAR, and PF Make :Conserve EM 6400 or Make: Secure Ellite 443 - 01 No (j)Three phase over current and earth fault digital numeric relay (over current (INST 50) & IDMT - 51 - 3 pole & earth fault (INST (50N) & INST (50N) & IDMT 51N - single pole) & negative sequence 46 auxiliary supply 20-110V AC/DC CT out put contacts 2 Nos + NC, rating-5, O/C Is= 20-200% in step of 5% E/F Os=5-80% in step of 5%. with common port ,the features and specification confirming to model No. MI COM P 122 of AREVA or equivalent Make of ABB -REJ601 or Seimen 7SR10. (k) Auxiliary relay with 6 N/O & 6 N/C Make Alstom/ABB/L&T - 1No (l) Master trip circuit Make Alstom/ABB/L&T- 1No (m) TNC switch and LR switch - 1No

(n) Heat control switch - 1 No (o) RYB, ON/Off , spring charred and discharged & VCB trip indications- 1 set (p) Space heater with thermo state & toggle switch - 1 No (q) Operating counter - 1 No (r) Rear and side cable box suitable for 95/ 120 Sq.mm 3 core XLPE cable (s) Spring charging motor with starter 230V AC - 1 No (t) Pluggable anti-pumping relay type CRM 4 with base- 1No (u) Pluggable AC fail relay type CRM 4 with base -1 No (v) Pluggable DC fail relay type CRM 4 with base -1 No (w) CB contact multifunction relay type PSU14(52X) -1No (x) 12W Annunciator + hooter- 1 set (y) Power pack 230V AC-110V DC (z) Control MCB/ Fuse set - 1set (aa) Panel illumination lamp with door limit switch - 1set (ab) Push button for TCH - 1 No

(ac) 9 KV , 10 KA , surge arrestor - 1 set of three (ad) Indicating lamp - 1 set (ae) online UPS of 1500VA ( min cap) with 02 Nos of 12V,200AH maintenance free battery,complete connect with VCB AC/DC supply NOTES :- (i) VCB shall be extensible type and these VCB out going panels are to be connected with existing VCB panel ( One incoming & one out going). The cost of additional busbar rating 1000Amp and fabrication required is deemed to be included with unit rate of item No. (ii). The contractor shall get the approval of GE for the make of the VCBs then plan to procure. (iii). Prior to manufacturing the general arrangement drawing design details of the VCB panel shall be got approved by GE.

(e) Indicator lamp for three phase and seletor switch complete as required Out going- (a) MCCB 4 Pole, 415 V,Thermal Magnetic release, Adjustable type, 100 Amps with 30 KA rapturing capacity - 07 Nos (b) MCB 4 Pole, 415 V,16 Amps with 10 KA rapturing capacity - 01 Nos Note: (i) Drawings of LT panel shall be got approved by GE before Manufacture.

Supply, install, commissioning and testing factory made (including CPRI type test certified manufacturer)LT panel box (KIOSK) out door type platform mounted suitable for 415 volt , 3 phases, 4 wire , 50 Hz AC supply system all as specified and directed having busbar chamber with insulated copper bus bars 300 amps rating installed on percelain insulators, the panel shall be dust and vermin proof double door made of 3.15 mm CRCA MS sheet outer & 2mm inner and individual compartment for MCCB/MCB & volt/Amps meter .The complete feeder pillar box should be power coated including connections between main bus bar to outgoing MCCB/MCB shall be carried out by copper busbar 63Amps and above MCCB & below 63Amps by 16 Sqmm copper cable. Front/back opening type with approx for cable entry with double door shutter including locking arrangement as per manufacturers with 2 Keys. ( KLP Offr Qtr Panel) Incoming (a) MCCB 4 Pole, 415 V,Thermal Magnetic release, Adjustable type, 100 Amp with 30 KA rapturing capacity - 01 No. (b) Bus bar copper 300 Amps - 01 Set of 4

Supply, install, commissioning and testing factory made (including CPRI type test certified manufacturer) LT panel box (KIOSK) out door type platform mounted suitable for 415 volt , 3 phases, 4 wire , 50 Hz AC supply system all as specified and directed having busbar chamber with insulated copper bus bars 300 amps rating installed on percelain insulators, the panel shall be dust and vermin proof double door made of 3.15 mm CRCA MS sheet outer & 2mm inner and individual compartment for MCCB/MCB & volt/Amps meter.The complete feeder pillar box should be power coated including connections between main bus bar to outgoing MCCB/MCB shall be carried out by copper busbar 63Amps and above MCCB & below 63Amps by 16 Sqmm copper cable. Front / backopening type with approx for cable entry with double door shutter including locking arrangement as per manufacturers with 2 Keys. (KLP JCO Qtr panel) Incoming (a) MCCB 4 Pole, 415 V, Thermal Magnetic release,Adjustable type, 100 Amps with 30 KA rapturing capacity - 01 No. (b) Bus bar copper 300 Amps - 01 Set of 4

Supply, install, commissioning and testing factory made (including CPRI type test certified manufacturer) LT panel box (KIOSK) out door type platform mounted suitable for 415 volt , 3 phases, 4 wire , 50 Hz AC supply system all as specified and directed having busbar chamber with insulated copper bus bars 300 amps rating installed on percelain insulators, the panel shall be dust and vermin proof double door made of 3.15 mm CRCA MS sheet outer & 2mm inner inner and individual compartment for MCCB/MCB & volt/Amps meter.The complete feeder pillar box should be power coated including connections between main bus bar to outgoing MCCB/MCB shall be carried out by copper busbar 63Amps and above MCCB & below 63Amps by 16 Sqmm copper cable. Front/back opening type with approx for cable entry with double door shutter including locking arrangement as per manufacturers with 2 Keys. (KLP OR Qtr panel for 18 Nos) Incoming (a) MCCB 4 Pole, 415 V, Thermal Magnetic release,Adjustable type, 100 Amps with 30 KA rapturing capacity - 01 No. (b) Bus bar copper 300 Amps - 01 Set of 4

(e) Indicator lamp for three phase and seletor switch complete as required Out going- (a) MCCB 4 Pole, 415 V, Thermal Magnetic release,Adjustable type, 63 Amps with 30 KA rapturing capacity - 04 No. (b) MCCB 4 Pole, 415 V, Thermal Magnetic release, Adjustable type, 32Amp, with 30kA rapturing capacity-01 No Note: (i) Drawings of LT panel shall be got approved by GE before Manufacture.

(e) Indicator lamp for three phase and seletor switch complete as required Out going- (a) MCCB 4 Pole, 415 V, Thermal Magnetic release,Adjustable type, 160 A with 35/36 KA rapturing capacity - 01 Nos (b) MCCB 4 Pole, 415 V, Thermal Magnetic release,Adjustable type, 100 Amp with 30 KA rapturing capacity - 02 Nos (c) MCB 4 Pole, 415 V,16 Amps with 10 KA rapturing capacity - 01 Nos Note: (i) Drawings of LT panel shall be got approved by GE before Manufacture.

(e) Indicator lamp for three phase and seletor switch complete as required Out going- (a) MCCB 4 Pole, 415 V, Thermal Magnetic release,Adjustable type, 63 Amps with 25 KA rapturing capacity - 03 No. (b) MCCB 4 Pole, 415 V, Thermal Magnetic release,Adjustable type, 40Amp, with 25kA rapturing capacity-01 No Note: (i) Drawings of LT panel shall be got approved by GE before Manufacture. (ii) Panel stand shall be made out of 50X50X5mm ISA angle of 60cm height and appropriate size as per panel. The same should be fixed in PCC below ground level 15cm and above ground level 10cm.

Supply & fix 60 watts LED street light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium IP66 with 10KV surge protection road way,luminaire with high power LED as light source with warranty option of 5 years and suitable drivers etc and connecting with 2 x 1 sq mm multistranded PVC insulated copper conductor to the jucntion box and fixing to complete all as specified and directed , Cat part no LSTP-60-CDL-M Make: Cromption/Havells/Bajaj or equivalent

Supply, install, test and commissioning factory made THERMOPLASTIC CABLE JUNCTION BOXES IP 66/67 “weather proof”, with terminals for outdoor installation (with knockouts for cable entry) of size 205 x 255 x 112 mm depth with cable entry size of 10-25 sqmm with terminal. Cat part No:KF 2525 G Make :-Hansel /Legrand/sintex or equivalent

S&F street light GI bracket of 1.2 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole as directed.

S&F Rubber mat of 1 meter x 2 meter x 19 mm complete all as specified and directed. Make :- Modi/Haveels/L&T/HPL/Asian/ABB

S&F Electric rubber hand gloves 11 KV complete all as specified and directed.

Supply and Fix MS HT/ LT cable route indicator made out of 80mm dia with 60cm long ISA made out of 25X6mm complete painted as directed ,duly embossed LT Voltage including and fix on Precast PCC (PCC 1:2:4, type B1 using 20mm graded stone aggregate) block of size 30cm x 20cm x 60cm in coping of existing/new poles / foundation for poles, struts, posts etc including necessary form work, finished the exposed surfaces fair and even without using extra cement complete.

Supply, install, testing & commissioning of Microprocessor based single phase tamper proof electronic static pre-paid cum postpaid energy meter with acrylic cover rating 240 Volts, 50 HZ, of range 10-60 Amps, complying to IS 15884 & IS 16444, IS 15959 Part-II with LED display and parameters like Voltage, Current, Frequency, Power, Power factor, KWh/KVA, default /in built dual source, inbuilt long range (LORAWAN) Communication suitable for outdoor LoRa data accumulator and also compatible for Prepaid and Postpaid online energy monitoring billing system, with disconnection /reconnection through remote software / data export to ERP complete all as specified and as directed. Make: ELMEASURE PE5121 or equally in SIEMENS/ Secure (SARAL SERIES comply to IS16444)/ Schenider & L&T Model No AURORA

Cost of configuration of the Web based software with following modules are incl in unit rates:(i) Meter Data Management Module The meter data management module would be responsible for collecting the data from the contractor and make the data available to the billing system. the meter data management system would capture and provide the following data- (a) 30 Min instantaneous data from all the meters for seven parameters- Cumulative Energy, Cumulative Apparent Energy (as applicable),power,current,voltage,power factor and frequency. (b) Monthly billing survy data for cumulative energy and max demand (ii) Prepaid billing module: The billing module would collect the data from the meter data management module,calculate the energy consumption, calculate billing determinant and make energy data/billing data available to admin and users. The billing module would include functionalities for tariff setup, bill format setup, bill adjustment, occupation billing and vacation billing

(iii) Occupation and Vacation Module: The system would support occupation/vacation and billing reports.The system would be collecting data from DCU. Th software would provide access to staff as well as the occupant for the data. (iv) Web Site:There would be dedicated website for the AGE and BSO team to view all the data and information. The designated users in MES would have the admin access to the application. The MES staff would also have the access of the key information on an android mobile app (for Admin use) (v) Customer Portal:The system would include a customer portal fo the resident/occupant to log in and view their own energy/billing data. There would be android and iOS mobile apps for the user to monitor its own data on regular basis.

Supply, install, testing & commissioning of Microprocessor based Three phase tamper proof electronic static pre paid cum postpaid energy meter with acrylic cover rating 240 Volts, 50 HZ, of range 10-60 Amps, complying to IS 15884 & IS 16444 with LED display and parameters like Voltage, Current, Frequency, Power, Power factor, KWh/KVA, default /in built dual source, compatable for Prepaid and Postpaid online energy monitoring billing system, with disconnection /reconnection through remote software / data export to ERP complete all as specified and as directed Make: ELMEASURE PE5121 or equally in SIEMENS/ Secure (SARAL SERIES comply to IS16444)/ Schenider & L&T Model No REGOR

Cost of configuration of the Web based software with following modules are incl in unit rates:(i) Meter Data Management Module The meter data management module would be responsible for collecting the data from the contractor and make the data available to the billing system. the meter data management system would capture and provide the following data- (a) 30 Min instantaneous data from all the meters for seven parameters- Cumulative Energy, Cumulative Apparent Energy (as applicable),power,current,voltage,power factor and frequency. (b) Monthly billing survy data for cumulative energy and max demand (ii) Prepaid billing module: The billing module would collect the data from the meter data management module,calculate the energy consumption, calculate billing determinant and make energy data/billing data available to admin and users. The billing module would include functionalities for tariff setup, bill format setup, bill adjustment, occupation billing and vacation billing

(iii) Occupation and Vacation Module: The system would support occupation/vacation and billing reports.The system would be collecting data from DCU. Th software would provide access to staff as well as the occupant for the data. (iv) Web Site:There would be dedicated website for the AGE and BSO team to view all the data and information. The designated users in MES would have the admin access to the application. The MES staff would also have the access of the key information on an android mobile app (for Admin use) (v) Customer Portal:The system would include a customer portal fo the resident/occupant to log in and view their own energy/billing data. There would be android and iOS mobile apps for the user to monitor its own data on regular basis.

Supply and fixing of single / Three phase meter box made of CRCA sheet not less than 2.0mm thk complete all as specified and directed.

Data Concentrator Unit (with RF and GPRS communication) Pls note: One DCU should be able to connect with minimum 25 smart meters complete all as specified and as directed.. Make: Sumeru Verde / Landis Gyr / Secure Meter/L&T

M&L for sand Nandla Nallah for spreading under stone aggregate complete all as specified and as directed.

Supply fixing testing & commissioning of configuration of cloud Hosted multi user web based software with following modules for 2 Years : (i) Meter data management Modules: The meter data management module would be responsible for collecting the data from the concentrator and make the data available to thec blling system . The billing system wold support offline meter data entry. the meter data management sysytem would capture and provide the following data. (a) 30 min instantaneouse data from all the meters for seven parameters - cumulative neergy , Power, Current , Voltage, Power factor and frequency. (b) Monthly and quarterly billing survey data for cumulative energy and max demand. (ii) Billing Module : The billing module would collect the dat from the meter data management module , calculate billing determinant and make energy data / billing data available to admin and end user. (iii) Occupation and Vacation module : The system woud support occupation?vaction based on the unit categories The system would support automatic data capture on occupation and vacation events. (iv) Coustomer Module : The system would include a coustomer portal for the resident/occupants to logt in and view their own energy/billing data.

(v) Energy Accounting module : The system weould include features of energy accounting , the system would to able to account for total energy block wise, facility wise and would also allow calculations of the unaccounted energy in case total energy meter is also available. (iv) Commumnication Module : The system would provide communication of energy data and bills via print, email and sms methods. (vii) Meter Master Data : The system would support meter dayav repository. The system would suppot meter replacement process. (viii) Excle Export : the system would support export of metering and illing data in excle format. Make : Elmeasure, Model : ELNET / L&T / SECURE/ SCHENIDER/ SIEMENS or Techno commercially equivalent

Hosting, GPRS charges for 2 years warranty period Make: Airtel/JIO/Vodafone

Meter Data Maintenance at Cloud for 2 Years

ROAD PATH AND CULVERT

M*L for applying 2mm thick thermoplastic road marking compound of white/yellow of approved make, shade , for road marking of any width & girth & painting lines , dashed arrows etc on bitumen road / pavement & concrete surfaces using hot processor plant including removing old paint by paint remover of burning of blow lamps & cleaning with scrapers for removing all dirt /dust complere all as specified and as directed

S&F cat eye reflector of both side reflection , size not less than 100x100x20mm , heavy duty with both side high grade red colour/yellow reflector fixed as per manufacturer instruction. Cat Part No. OS-782 of Oscar or equivalent in Dark Eye and Sapphire

SEWAGE DISPOSAL

M&L for construction of Septic tanks complete all as specfied and shown on drawing of following capacity

50 Users

100 Users

200 users

M&L for construction of soakage well of size 1.80m dia x 3.00 deep complete all as specified and as shown on drawing.

M&L for construction of soakage well of size 1.80m dia x 4.50 deep complete all as specified and as shown on drawing.

RAIN WATER HARVESTING

M&L including testing for rain water harvesting Recharge pit exc in ordinary soil, PCC in foundation (1:3:6) walls of honey combed & solid brick work in CM (1:4) RCC covers slabs M-25, filling with brick bats of Size 3 m dia x 4.50 m deep including boring of 150mm bore for 6meter depth from bottom of recharge pit and 150mm bore perforated pipe, complete all as specified and shown in drawing.

Sood Enterprises

Dasmesh Buildcon

SARAOGI BUILDERS LIMITED

BHARATSHAH CONSTRUCTION CO

SOOD ASSOCIATES PVT LTD