REPAIR / REPLACEMENT OF STREET LIGHTS AT MO (MB) GHATKOPAR UNDER GE (NW) BHANDUP

Excavation in trenches n.exc 1.5 m wide and n. exc 1.5 m in depth and getting out in soft/loose soil for removing/laying of cables complete all as specified and as directed by Engineer-in-charge.

Returning, filling including spreading , leveling , watering and well ramming in layers n.exc 25 cm complete all as specified and as directed by the Engineer-in- Charge

Removing excavated material to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge

M&L for river washed river sand and screened dry for caushioning to ug cables in trenches below and around under ground cable for coushioning of cable in ducts including spreading and levelling complete.

Supply, Lay, Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 10 Sqmm, 4 core complete all as specified.

Supply, Lay, Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 16 Sqmm, 4 core complete all as specified.

Supply, Lay, Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 25 Sqmm, 3.5 core complete all as specified.

Supply, Lay, Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 35 Sqmm, 3.5 core complete all as specified.

Supply, Lay, Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 120 Sqmm, 3.5 core complete all as specified.

Supply, Lay, Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 185 Sqmm, 3.5 core complete all as specified.

Supply, Lay, Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 240 Sqmm, 3.5 core complete all as specified.

Supplying and laying unreinforced precast concrete cable cover class LV type 1, flat, size 250 x 150 x 40 mm complete all as specified and directed by the Engineer - in - charge.

Supply and laying DWC HDPE pipes of size 32 mm bore laid in trenches for passing of cable complete all as specified and directed.

Supply and laying DWC HDPE pipes of size 40 mm bore laid in trenches for passing of cable complete all as specified and directed.

Material and labour for GI tubes "Medium Grade" 80 mm bore with and including all fittings laid in trenches/road crossing/floors etc for cable protection complete all as specified and directed.

Supply and fixing in repairs LED bollards light fitting 10 to 15 watt mushroom shaped made in cast aluminium spigot housing with decorative clear acrylic diffuser for pleasant light output and weather proof and IP66 protection, PF>0.95, LED light luminous efficiency shall not be less than 90 Lumens/Watt and the colour rendering index shall not be less than 70 and Correlated Colour Temperature is 6500K and light should complying ISI and BIS marking complete all as specified and directed. Make :Shakti Model No. SZPGMMX010

Supply and fixing in repairs LED post top lanterns fitting made in cast aluminium spigot housing with decorative clear acrylic diffuser and LED light luminous efficiency shall not be less than 90 Lumens/Watt and the colour rendering index shall not be less than 70 and Correlated Colour Temperature is 6500K and light should complying ISI and BIS marking 12/15 watt complete all as specified and directed.

Supply and fixing in repairs highly efficient high power multi LED flood fitting 150 watts with pressure die cast aluminium housing reflector and enclosed with toughened glass IP66 protection, PF>0.95, LED light luminous efficiency shall not be less than 90 Lumens/Watt and the colour rendering index shall not be less than 70 and Correlated Colour Temperature is 6500K and light should complying ISI and BIS marking complete prewired and connecting with 0.5 sqmm 3 core flexible wire including fixing arrangement on wall etc complete including dismantling of existing unserviceable flood light fittings complete all as specified and directed by Engineer in Charge. Make: Surya/Philips/Luckar/CG

Supply and fix in replacement of highly efficient high power LED street light fitting 90/100 W with pressure die cast aluminium housing reflector and enclosed with heat resistant toughened glass IP66 protection, PF>0.95, LED light luminous efficiency shall not be less than 90 Lumens/Watt and the colour rendering index shall not be less than 70 and Correlated Colour Temperature is 6500K and light should complying ISI and BIS marking protection AC 240 Volts 50 HZ refractive lens with suitable electronic drive PF > 0.9 complete including taking exiting unserviceable street light fitting. Make:Philips/Luckar/CG/Surya

Supply and fix in replacement of highly efficient high power 45/50 W LED street light fitting with pressure die cast aluminium housing reflector and enclosed with heat resistant toughened glass IP66 protection AC 240 Volts 50 HZ refractive lens with suitable electronic drive PF > 0.9 complete including taking exiting unserviceable street light fitting. Make: CG/Luker/Havells/Shakti

Supply and fix in repairs pipe bracket made out of 40 mm dia GI pipe, medium grade, upto 1.5 mtr long, bent to shape and fixed on existing pole/ wall complete all as specified and directed. Note : Clamps nuts bolts etc will be measured and paid seprately under relevant items.

Supply and fixing in replacement pole mounting FRP looping box ISI marked type of size 250mm x 175mm x 100 mm, 3 phase with locking arrangements including necessary nut, bolt and clamps of the flat iron of size 25mm x 4 mm comprising of MCB SP 6 Amps, 240 Volts, 10 KA, 'C' series and 3 phase connector 100Amp for incoming/outgoing cables with proper fixing arrangements on pole / wall complete all as specified and directed. Make: National/ Sintex/Hensel

Supply and fix in replacement of FRP looping box ISI marked of size 155x210x92 mm with connector, MCB 6 Amps, Din Rail, GI clamps made out of GI flat of size 25mm X 3 mm channel including making connections complete all as specified and directed. Make - Confirm to Cat No KF 1616 G of Hensel/ or equivalent of National / Sintex .

M & L in repairs for sub main wiring PVC copper cable 2.5 sqmm (03 Run of 2.5 sqmm) copper conductor 1100 Volt grade multi core multi stranded PVC insulated unsheated drawn through and including PVC conduit and accessories fixing on poles/ wall with clamps, nuts bolts etc from FRP box to street light fiting complete all as specified and direcetd

M&L for Preparation of old exposed surface of LT steel tubular poles of any type / size with bracktes clamps etc and painting with one coat of aluminium paint upto 6 mtr long and exposed surface of pole yellow and black paint in strips alternative 30 cm wide upto 1.5 mtr from ground level including marking of pole no's with paint all as specified.

M&L for mild steel TMT bars 6 mm to 8mm dia cut to length, bent to shape required, stirrups, spaces and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed

M&L for RCC 1:2:4 type B-1, (nominal mix) using 20 mm graded stone aggregate as in footing, columns, post, pillars, piers, wall of culverts, suspended slabs, edges and struts etc complete all as specified and directed

M&L for farm work to sides of concrete footings, columns, posts, pillars, piers, edges and struts of rectangular or triangular shape for rough finished flat concretesurface complete all as specified and directed

Supply and fixing in repairs high bay LED light fittings with highly efficient LED baylight capacity 100W made of pressure die cast aluminium housing extraded aluminium heat sink & enclosed with toughended glass IP66 protection, PF>0.95, LED light luminous efficiency shall not be less than 90 Lumens/Watt and the colour rendering index shall not be less than 70 and Correlated Colour Temperature is 6500K and light should complying ISI and BIS marking with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fitting, including fixing arrangement on truss with MS Clamps made out of 25x5mm flat iron with nuts, bolts etc complete painting with two coats synthetic enamel paint over a coat of red oxide complete dismantling existing unserviceable high bay fittings all as specified and directed. Make Philips/CG/Luckar

M & L for prepration of old exposed surface of garden light pole 1.5/ 2.5/5 meter long applying two coats of aluminium paint over a coat of anticorrosive paint including painting to bottom of pole complete all as specified and directed.

Supply and fixing in repair maintenance lithium battery 11.1/33Ah (suitable for 32 watt solar lights) BMS circuit and other necessary wiresconnectors suitable for 32 watt integrated solar lights complete all as specified and directed. Make: Axxon or equivalent.

Supply and fixing in repair maintenance lithium battery 11.1/19.8 Ah (suitable for 12 watt solar lights) BMS circuit and other necessary wiresconnectors suitable for 12 watt integrated solar lights complete all as specified and directed. Make: Axxon or equivalent.

Materials and labour for servicing & spray painting factory made powder coated as approved colour and servicing of LT panel with burnts wiring, cleaning of panel , lugs, glands of any size, and others connected accessories complete all as specified and directed.

M&L for finding faults of LT UG cable XLPE, of any size and any length by using computerised / primary current injection method / any other method as directed by the GE and locating fault, cutting and removing the faulty portion of the cable and jointing with suitable cable joint and testing after jointing all as required and directed. Note: Joints shall be paid for separately.

M & L for rewiring of old burnt out copper wiring in LT Panels/LT Feeder, replacing of cable Glands, cable lugs, bus bar link, connectors, insulators, door hinges, panel door locks and including SS nut bolts all as specified and directe

M & L for rewiring of old burnt out copper wiring for connector to MCB and armour earthing including 6-32 A MCB and Repair/replacement of cable Glands, cable lugs, 4 way connector, bolt type having locking arrangement, weather proof and water proof control space including 3mm thick plastic laminated sheet, all as specified and directected

M&L for Preparation of old exposed surface of LT Decorative poles of any type / size with bracktes clamps etc and painting with one coat of Epoxy paint upto 5 mtr long with spray paint all as specified.

Taking out of unservceable LT XLPE cable of any size and connected items complete all as specified and directed by Engr-in-Charge.

M&L for straight through joint (Heat shrinkable type) suitable for 3 ½ /4 core 120 to 400 Sqmm size underground cable complete all as specified and directed.

M & L for 6 sqmm GI EARTH WIRE and including 16 mm MS earth rod BURIED 300mm MIN. BELOW THE FINISHED FOOTPATH LEVEL connecting by nut and bolts for LT street lights poles of any type / size all as specified and directed by Engr-in-Charge.Note :- Rates including excavation and retuning filling for burring MS rod.

S&F LED bulb retrofit 15 Watt E27 base with flat surfase of reflection light should be fixed with silicon gel on both side to protect from water complete all as specified and directed.

Repair/ replacing of cable lugs, SS nut bolts after finding out all loose connection/ rusted connection for LT Panels/LT Feeder/Street lights poles all as specified and directed.

Taking down and reinstallation and Testing and commissioning of existing solar water heater system by fixing of some minor accessories like rubber gasket, washers nuts and bolts etc complete all as specified and directed.

M & L for cleaning and finishing of solar integrated system LED street light fitting of any type/any size

Supply and fixing solar integrated system LED street light fitting 32 watt with Lithium ferrous phosphate battery dimming version(LFP),PIR inbuilt option of MPPT charge controller available solution with Li-Ion separately available power factor >0.9,having inbuilt surge protection device for overvoltage protection with all accessories prewired with IP 66 or better ingress protection with inbuilt Lithium Battery 11.1V/12.8Volt 33Ah, provided with 2 LED indicators : a green light to indicate charging in progress and a red LED to indicate deep discharge condition of the battery, green LED glow only when the battery is actually being charged, battery included in the luminary enclosure, with water proof (IP 66 or better) and corrosion resistant, material of construction of solar light fitting shall be FRP, LED lamp 32 watt (W-LED, 180-200 lm/watt, CRI>70) with 120Degree vide angle lens for better light distribution and colour temp-5700-6500K, Solar PV Module mono crystalline, > = 66 Wp. complete including warranty for light fitting 2 years after completion of the work complete all as specified and directed.

Supply installation, testing and commissioning of FAST ELECTRODE maintenance free Chemical Earthing of Dual Pipe Technology, each of 3 Meter long with Outer Pipe Diameter of 88mm (galvanised for 80-120 micron and wall thickness 1.80mm) and Inner Pipe diameter 48mm (galvanised for 80-120 micron and wall thickness 2.60mm). There shall be terminal of size 75 x 5.20mm for connection with two holes of 14mm diameter. FAST ELECTRODE shall be duly filled with the highly conductive, Non Magnetic, Non Corrosive material and duly sealed at both ends with lead terminal of 75x5.2mm at top. The ELECTRODE shall be of 'make' having approval of CPRI (Central Power Research Institute), Govt of India for a minimum short circuit current of 42 KArms for 1 Second with initial pick of 88.2 KA. The FAST ELECTRODE Earth Enhancing Compound (minimum 25Kg) shall be pored on alround the electrode. The chemical compound to be used shall be as per the manufacturer's instructions of 'Electrode' and as also certified by any BIB (Bureau of Indian Standards) accredited laboratory. Make : Fast Electrode or equivalent as approved by the GE.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 1,06,965.00 (Minus) as listed in Schedule of Credit. Note 1:- Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'. Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.

Please Enable Macros to View BoQ information