Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.0 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹19.0 L+₹75,692 (4.15%)Rejected-Finance 00 BALAJI ENTERPRISES NEW ROAD NEW ROAD RATLAM MADHYA PRADESH 457001 | RATLAM | MADHYA PRADESH | 457001 | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹22.2 L+₹4.0 L (21.8%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
7 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Hisar
Garrison Engineer Hisar Military Station Hisar 125006
CA No GE(H)-51/2022-23 REPAIR TO FOOTPATH, DRAIN AND ATTENDING EMERGENT DAY TO DAY COMPLAINT OF SEWER NATURE AND ALLIED WORKS OF OTM ACCN IN THE AOR OF AGE B/R I UNDER GE HISAR AT HISAR MIL STN
2022_MES_562077_1
CA No GE(H)-51/2022-23
Open Tender
Civil Works
Item Rate
270 days
Hisar Mil Stn
As per Tender documents
6 documents required · 6 mandatory
₹500
GE Hisar
₹50,000
Yes
9 Jan 2023
9 Nov 2022
9 Dec 2022
9 Nov 2022
7 Dec 2022
24 Nov 2022
Amount
Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level) complete, all as directed.
Demolition and breaking up drain pipes 150mm bore (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar complete all as specified.
Demolition and breaking up drain pipes 200mm bore (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar complete all as specified.
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.
Demolition of brick/stone masonry built in cement/lime mortar of any mix and stacking serviceable stones aside for reuse & removing unserviceable materials in low laying area, complete, all as directed.
Demolition of stone slab and tiles of any description or thickness in floors, apron etc laid bedded and pointed in any mortor etc complete all as specified and directed.
Excavation in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes etc not exc 10 Sqm on plan and getting out in soft/loose soil all as specified.
Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25 cm in soft/loose soil all as specified.
Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level n. exc 1.50 metre above the starting point complete all as specified.
M&L for hardcore of broken bricks, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface all as directed.
M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete all as directed.
M&L precast cement concrete (1:2:4 type B0 using 12.5mm graded stone aggregate) louvers and jallies, 25mm thick (measured solid), including all mouldings but excluding frame, set in CM 1:4 all as specified & as directed.
M&L cement concrete (1:3:6) type C1 using 20 mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement Note : Forming fair finished channel for drain using extra cement shall be measured and paid for separately.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc.
M&L for cement concrete 1:2:4 type B1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified.
M&L for precast RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:4) complete including demolition of existing precast RCC all as specified & as directed. Note :- Reinforcement shall be measured and paid for separately.
M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified.
All as per serial item No 17.00 here-in-before but except bricks. Note : Old serviceable bricks retrieved from serial item No. 5.00 here-in-before shall be used under this item.
M&L brick work with subclass 'B' old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified.
M&L for Continuous brick edging using sub-class 'B' bricks, with width equal to the width of the brick, laid dry on end vertically complete all as specified.
M&L for reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.
M&L for PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in levelling course 25mm thick finished fair & even complete all as specified & as directed.
M&L for 100mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in floor finished with spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green, all as directed.
M&L for coloured chequered cement concrete tiles (vibrate type) 25cm x 25cm x25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over & including 20mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed.
M&L for factory made 60mm thick machine pressed precast cement concrete coloured interlocking paver blocks glossy finish of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.
M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in kerb block (factory casted) with plain fair faces, including weathering, slightly rounded or chamfered angle throating, with plain or interlocking joints and setting in cement mortar 1:4, complete, all as directed.
M&L flush pointing to brick walls in cement mortar 1:4 all as specified.
M & L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved shade/tint all as specified & as directed.
M & L for preparing new or old brick, stone, asbestos cement or plastered surfaces, concrete surfaces (Kerb Stone Painting) of any description over 10cm width or girth and applying one coats of synthetic enamel paint of any tint etc complete all as specified and as directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. (measured overall as fixed along the centre line over fitting and accessories) complete all as specified.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to wallcomplete all as specified.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to wall complete all as specified.
S&F 110mm bore PVC (SWR) bend all as specified & as directed.
S&F 75mm bore PVC (SWR) bend all as specified & as directed.
Material and labour PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in concrete bed to drain pipes including forming cradles in after they are laid and tested complete for 150mm bore pipe all as specified and as directed.
Material and labour PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in concrete bed to drain pipes including forming cradles in after they are laid and tested complete for 200mm bore pipe all as specified and as directed.
Material and labour PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in concrete bed to drain pipes including forming cradles in after they are laid and tested complete for 300mm bore pipe all as specified and as directed.
M&L for 150mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed.
M&L for 200mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed.
M&L for 300mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed.
M&L for cutting into existing manholes/Septic tank for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150mm bore pipe.
Cleaning of underground sewage line of any type and line of dia 150mm and upto 600mm dia pipe including manhole of depth exc 1.5m to 4.50m depth all in working and running condition involving removal of blockages of any kind in man holes or sewage lines by means of mechanical rodding with vibration /drilling concept i.e trolley mounted motorized sewer cleaning machine including desluding descaling & dechoking of line wherever required, flushing the entire stretch with combined high pressure water jetting cum suction (vaccume) type machine suitably fabricated on HCV having facilities of hydraulic application through high pressure thermoplastic, making the stretch clean, functional and removal /deposition of sludge inclusive of solids of any type & sludge water to a distance exceeding 1.5KM but not exc 5KM and covering the entire sludge and solids with local earth complete.
Desilting /de-sludging of septic tank, soakage well by removing all sludge (in semi liquid or semi solid state) both organic or inorganic in nature including complete dewatering from septic tank, soakage well by vacuum process closed tankers tractor driven and disposing off sewage water to a distance exceeding 1.5km but not exc 5km and covering the entire sludge and solid with local earth complete.. Note :- (i) The rate quoted includes bailing out sludge water from sump well / soakage well all as directed. (ii) For payment purpsoe volume of sludge shall be calculated as per the dimensions of sump well / soakage well at site / shown in TD drawing and depth of sludge after bailing out of sludge water.
Removing of localised blockage by cleaning gully trap, floor/Nahani trap, soil waste pipe, WC, chocked rain water pipe etc upto and including 1st manhole and removing sludge water/waste upto 50 metre distance and burring the same in pit complete. Note :- Blockage belongs to one quarter/building in drain pipes connected to first manhole shall be measured and paid as one unit irrespective to No of connections/cubicals including dewatering of first manhole if required.
Removing of localised blockage by flushing, rodding, activating sewage system manually or mechnically between adjacent two manhole of sewage line upto 200mm dia pipe and depth of sewage line upto 1.50m deep after first manhole and removing sludge water / waste upto 50 metre distance and burring the same in pit complete. Note :- One complaint shall be considered on removing blockage between two adjacent manholes.
Removing of localised blockage by flushing, rodding, activating sewage system manually or mechnically between adjacent two manhole of sewage line upto 200mm dia pipe and depth of sewage line exc 1.50m and upto 3.00m deep after first manhole and removing sludge water / waste upto 50 metre distance and burring the same in pit complete. Note :- One complaint shall be considered on removing blockage between two adjacent manholes.
Thorough cleaning, of manholes and adjacent line by flushing and activating sewage system and cleaning manually (by rodding to & fro with sewage steel clearing rods) or mechanically with suction machine / Scrappers of sewage line upto with depth not exc 1.5m and getting out solid/sludge/sand/foreign matters etc deposited in lines & sewer of any section, shape, depth and removing the same to a distance exc 250 metre and not exc 500 metre all as directed at site complete.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .