Construction of 1DSP Quarter Inspector/ZI Quarter SI/ZSI Quarters at Nalgonda of Nalgonda District Sub Work:Providing Cup board and Construction of Compound wall at(Balance work) Intelligence Quarters at Nalgonda of Nalgonda District.

EARTH WORK EXCAVATION AND DEPOSITING ON BANK, FOR ALL LIFTS AND WITH AN INITIAL LEAD OF 10M INCLUDING ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS SHORING, SHEETING, PLANKING, STRUTTING, DEWATERING SITE CLEARANCE, CLEARING SHURBS, BRUSHWOOD, UNDER GROWTH AND SMALL TREES NOT EXCEEDING 300 MM GIRTH, MEASURED AT ONE METRE ABOVE GROUND ETC., COMPLETE FOR FINISHED ITEM OF WORK INCLUDING DEWATERING CHARGES ETC AS PER SS - 20 B FOR STIFF BLOCK COTTON SOIL , HARD RED EARTH, MURRAM, ORDINARY GRAVEL - MANUAL MEANS UP TO 3M DEPTH FOR OPEN EXCAVATION -EXCLUDING GST. (APSS 308).

CEMENT CONCRETE (1:4:8) PROP. USING 40MM HARD GRANITE MACHINE CRUSHED METAL WITH MACHINE MIXING UP TO PLINTH LEVEL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR ETC., BUT EXCLUDING SEIGNIORAGE CHARGES & GST ON ALL MATERIALS, COMPLETE FOR FINISHED ITEM OF WORK. FOUNDATIONS & UNDER STONE SLAB FLOORING .(APSS NO: 402).

RANDAM RUBBLE MASONRY USING HARD GRANITE STONE IN CM(1:6) PROP. INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, SEIGNORAGE CHARGES,LABOUR CHARGES, CURING, ETC., COMPLETE FOR FOUNDATIONS AND BASEMENTS FOR FINISHED ITEM OF WORK. APSS NO: 615).

MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM FOR MANUFACTURING OF FLYASH SOLID BLOCKS USING FLYASH OF 80 KGS, CEMENT OF 15 KGS. GYPSUM OF 5 KGS. AND STONE DUST INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., BUT EXCLUDING SEIGNIORAGE CHARGES & GST ON ALL MATERIALS, COMPLETE WITH A COMPRESIVE STRENGTH NOT LESSTHAN 50 KG/SQM FOR WALLS OF 225MM THICK GROUND FLOOR FOR FINISHED ITEM OF WORK(APSS NO. 501&504)

PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. with sponze finishing, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, LIFTING ( MANUAL) CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., BUT EXCLUDING SEIGNIORAGE CHARGES & GST ON ALL MATERIALS, COMPLETE.FOR FINISHED ITEM OF WORK. (APSS NO: 901&904)

PAINTING WITH semi glossy acrylic emulsion paint exterior premium grade with silicon additives having VOC content less than 50gm/lit OF APPROVED MAKE AND COLOUR TO THE EXTERIOR FACES OF WALLS AS DIECTED 2COATS BY DILUTING 1LIT OF EMULSION PAINT WITH A MAXIMUM 750 Ml OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER 1COAT OF ASIAN EXTERIOR WALL PRIMER BY DILUTING 1LIT. OF PRIMER WITH 1LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION Etc., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, BRUSHES, LABOUR CHARGES, CURING, SCAFFOLDING AND ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC.,BUT EXCLUDING GST, COMPLETE FOR FINISHED ITEM OF WORK (APSS NO:908).

Bed Room - 1 :- Design, supply, manufacture, delivery and installation of modular wardrobe shutter , constructed using minimum 16 mm BWP/BWR grade pre-laminated or laminate-finished engineered wood boards for frame work and shutters, finished with approved make, colour and texture laminate (minimum 1.0 mm thick on exposed surfaces and 0.8 mm balancing laminate on inner faces), including internal shelves, drawers, hanging rods, partitions and accessories, complete with soft-close concealed hinges, soft-close drawer channels, aluminium / SS / approved finish handles, edge banding (minimum 2 mm PVC), fasteners, screws and all necessary hardware, including cutting, edging, alignment and fixing, complete in all respects as per approved shop drawings and specifications. All hardware to be of Hettich or approved equivalent Edge banding: machine-pressed PVC, matching laminate colour Warranty: minimum 3 years for hardware and workmanship Includes measu Wadrobe

Bed Room -2 :- Design, supply, manufacture, delivery and installation of modular wardrobe shutter , constructed using minimum 16 mm BWP/BWR grade pre-laminated or laminate-finished engineered wood boards for frame work and shutters, finished with approved make, colour and texture laminate (minimum 1.0 mm thick on exposed surfaces and 0.8 mm balancing laminate on inner faces), including internal shelves, drawers, hanging rods, partitions and accessories, complete with soft-close concealed hinges, soft-close drawer channels, aluminium / SS / approved finish handles, edge banding (minimum 2 mm PVC), fasteners, screws and all necessary hardware, including cutting, edging, alignment and fixing, complete in all respects as per approved shop drawings and specifications. All hardware to be of Hettich or approved equivalent Edge banding: machine-pressed PVC, matching laminate colour Warranty: minimum 3 years for hardware and workmanship Includes measu Wadrobe

Bed Room - 3 ::- Design, supply, manufacture, delivery and installation of modular wardrobe shutter , constructed using minimum 16 mm BWP/BWR grade pre-laminated or laminate-finished engineered wood boards for frame work and shutters, finished with approved make, colour and texture laminate (minimum 1.0 mm thick on exposed surfaces and 0.8 mm balancing laminate on inner faces), including internal shelves, drawers, hanging rods, partitions and accessories, complete with soft-close concealed hinges, soft-close drawer channels, aluminium / SS / approved finish handles, edge banding (minimum 2 mm PVC), fasteners, screws and all necessary hardware, including cutting, edging, alignment and fixing, complete in all respects as per approved shop drawings and specifications. All hardware to be of Hettich or approved equivalent Edge banding: machine-pressed PVC, matching laminate colour Warranty: minimum 3 years for hardware and workmanship Includes measu Wadrobe

Pooja Unit - Design, supply, manufacture, delivery and installation of modular wardrobe shutter , constructed using minimum 16 mm BWP/BWR grade pre-laminated or laminate-finished engineered wood boards for frame work and shutters, finished with approved make, colour and texture laminate (minimum 1.0 mm thick on exposed surfaces and 0.8 mm balancing laminate on inner faces), including internal shelves, drawers, hanging rods, partitions and accessories, complete with soft-close concealed hinges, soft-close drawer channels, aluminium / SS / approved finish handles, edge banding (minimum 2 mm PVC), fasteners, screws and all necessary hardware, including cutting, edging, alignment and fixing, complete in all respects as per approved shop drawings and specifications. All hardware to be of Hettich or approved equivalent Edge banding: machine-pressed PVC, matching laminate colour Warranty: minimum 3 years for hardware and workmanship Includes measu BOX

Bed Room - 1 :- Design, supply, manufacture, delivery and installation of modular wardrobe shutter , constructed using minimum 16 mm BWP/BWR grade pre-laminated or laminate-finished engineered wood boards for frame work and shutters, finished with approved make, colour and texture laminate (minimum 1.0 mm thick on exposed surfaces and 0.8 mm balancing laminate on inner faces), including internal shelves, drawers, hanging rods, partitions and accessories, complete with soft-close concealed hinges, soft-close drawer channels, aluminium / SS / approved finish handles, edge banding (minimum 2 mm PVC), fasteners, screws and all necessary hardware, including cutting, edging, alignment and fixing, complete in all respects as per approved shop drawings and specifications. All hardware to be of Hettich or approved equivalent Edge banding: machine-pressed PVC, matching laminate colour Warranty: minimum 3 years for hardware and workmanship Includes measurement at site, shop drawings and mock-up approval Wadrobe

Bed Room -2 :- Design, supply, manufacture, delivery and installation of modular wardrobe shutter , constructed using minimum 16 mm BWP/BWR grade pre-laminated or laminate-finished engineered wood boards for frame work and shutters, finished with approved make, colour and texture laminate (minimum 1.0 mm thick on exposed surfaces and 0.8 mm balancing laminate on inner faces), including internal shelves, drawers, hanging rods, partitions and accessories, complete with soft-close concealed hinges, soft-close drawer channels, aluminium / SS / approved finish handles, edge banding (minimum 2 mm PVC), fasteners, screws and all necessary hardware, including cutting, edging, alignment and fixing, complete in all respects as per approved shop drawings and specifications. All hardware to be of Hettich or approved equivalent Edge banding: machine-pressed PVC, matching laminate colour Warranty: minimum 3 years for hardware and workmanship Includes measurement at site, shop drawings and mock-up approval Wadrobe

Bed Room -3 :- Design, supply, manufacture, delivery and installation of modular wardrobe shutter , constructed using minimum 16 mm BWP/BWR grade pre-laminated or laminate-finished engineered wood boards for frame work and shutters, finished with approved make, colour and texture laminate (minimum 1.0 mm thick on exposed surfaces and 0.8 mm balancing laminate on inner faces), including internal shelves, drawers, hanging rods, partitions and accessories, complete with soft-close concealed hinges, soft-close drawer channels, aluminium / SS / approved finish handles, edge banding (minimum 2 mm PVC), fasteners, screws and all necessary hardware, including cutting, edging, alignment and fixing, complete in all respects as per approved shop drawings and specifications. All hardware to be of Hettich or approved equivalent Edge banding: machine-pressed PVC, matching laminate colour Warranty: minimum 3 years for hardware and workmanship Includes measurement at site, shop drawings and mock-up approval Wadrobe

Bed Room - 1 :- Design, supply, manufacture, delivery and installation of modular wardrobe shutter , constructed using minimum 16 mm BWP/BWR grade pre-laminated or laminate-finished engineered wood boards for frame work and shutters, finished with approved make, colour and texture laminate (minimum 1.0 mm thick on exposed surfaces and 0.8 mm balancing laminate on inner faces), including internal shelves, drawers, hanging rods, partitions and accessories, complete with soft-close concealed hinges, soft-close drawer channels, aluminium / SS / approved finish handles, edge banding (minimum 2 mm PVC), fasteners, screws and all necessary hardware, including cutting, edging, alignment and fixing, complete in all respects as per approved shop drawings and specifications. All hardware to be of Hettich or approved equivalent Edge banding: machine-pressed PVC, matching laminate colour Warranty: minimum 3 years for hardware and workmanship Includes measurement at site, shop drawings and mock-up approval Wadrobe

Bed Room -2 :- Design, supply, manufacture, delivery and installation of modular wardrobe shutter , constructed using minimum 16 mm BWP/BWR grade pre-laminated or laminate-finished engineered wood boards for frame work and shutters, finished with approved make, colour and texture laminate (minimum 1.0 mm thick on exposed surfaces and 0.8 mm balancing laminate on inner faces), including internal shelves, drawers, hanging rods, partitions and accessories, complete with soft-close concealed hinges, soft-close drawer channels, aluminium / SS / approved finish handles, edge banding (minimum 2 mm PVC), fasteners, screws and all necessary hardware, including cutting, edging, alignment and fixing, complete in all respects as per approved shop drawings and specifications. All hardware to be of Hettich or approved equivalent Edge banding: machine-pressed PVC, matching laminate colour Warranty: minimum 3 years for hardware and workmanship Includes measurement at site, shop drawings and mock-up approval Wadrobe

Bed Room -3 :- Design, supply, manufacture, delivery and installation of modular wardrobe shutter , constructed using minimum 16 mm BWP/BWR grade pre-laminated or laminate-finished engineered wood boards for frame work and shutters, finished with approved make, colour and texture laminate (minimum 1.0 mm thick on exposed surfaces and 0.8 mm balancing laminate on inner faces), including internal shelves, drawers, hanging rods, partitions and accessories, complete with soft-close concealed hinges, soft-close drawer channels, aluminium / SS / approved finish handles, edge banding (minimum 2 mm PVC), fasteners, screws and all necessary hardware, including cutting, edging, alignment and fixing, complete in all respects as per approved shop drawings and specifications. All hardware to be of Hettich or approved equivalent Edge banding: machine-pressed PVC, matching laminate colour Warranty: minimum 3 years for hardware and workmanship Includes measurement at site, shop drawings and mock-up approval Wadrobe