Construction of the 200 bedded Super Speciality at Kemburli Tal Mahad Dist Raigad

Trimming of grass, shurbs and weeds from the shoulders/berms and disposing off the same to suitable locations etc. complete (Item No. 8.17)

Item Sr No. 1.1 of Building Work

Item Sr No. 2.1 of Mortury Building Work

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(Lift upto 1.5m.) By Mechanical Means (Item No. 21.02)

Item Sr No. 1.2 of Building Work

Item Sr No. 2.2 of Mortury Building Work

Item Sr No. 5.1 of Compound Wall and Gate

Item Sr No. 7.1 of Developement of Ground

Item Sr No. 9.1 of Under Ground Water Tank

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(Lift upto 1.50 m) By Mechanical Means (Item No. 21.06)

Item Sr No. 1.3 of Building Work

Item Sr No. 2.3 of Mortury Building Work

Item Sr No. 5.2 of Compound Wall and Gate

Item Sr No. 9.2 of Under Ground Water Tank

Excavation for foundation in hard rock by chiselling and wedging or line drilling including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. a) Upto 1.50m lift Normal Rate b) 1.50m to 3.00m lift, Add 10% c) 3.00m to 4.50m lift, Add 20% d) 4.50m to 6.0m lift, Add 30% (Item No. 12.11)

... (Item No. 12.11)

Providing preconstructional antitermite treatment as per I.S. 6313(Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. (Item No. 21.22)

Item Sr No. 1.5 of Building Work

Item Sr No. 2.5 of Mortury Building Work

Providing preconstructional antitermite treatment as per I.S. 6313(Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper. (Item No. 21.23)

Item Sr No. 1.6 of Building Work

Item Sr No. 2.6 of Mortury Building Work

Providing preconstructional antitermite treatment as per I.S. 6313(Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. (Item No. 21.24)

Item Sr No. 1.7 of Building Work

Item Sr No. 2.7 of Mortury Building Work

Providing preconstructional antitermite treatment as per I.S. 6313(Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30-60cm deep at 15cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper. (Item No. 21.25)

Item Sr No. 1.8 of Building Work

Item Sr No. 2.8 of Mortury Building Work

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. (Item No. 21.36)

Item Sr No. 1.9 of Building Work

Item Sr No. 2.9 of Mortury Building Work

Item Sr No. 7.2 of Developement of Ground

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm to 20cm including watering and compaction etc. complete. (Item No. 21.37)

Item Sr No. 1.10 of Building Work

Item Sr No. 2.10 of Mortury Building Work

Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15cm to 20cm thick including hand packing and compacting etc. complete. (Item No. 21.38)

Item Sr No. 1.11 of Building Work

Item Sr No. 2.11 of Mortury Building Work

Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15cm to 20cm thick including hand packing and compacting etc. complete. (Item No. 21.38)

Item Sr No. 5.3 of Compound Wall and Gate

Item Sr No. 6.1 of Internal Road

Item Sr No. 9.3 of Under Ground Water Tank

Providing and laying Cast in situ/Ready Mixcement concrete in M20 of trap/granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.(Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 24.06)

Item Sr No. 1.12 of Building Work

Item Sr No. 2.12 of Mortury Building Work

Item Sr No. 6.13 of Internal Road

Item Sr No. 9.4 of Under Ground Water Tank

Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.17)

Item Sr No. 1.13 of Building Work

Item Sr No. 2.13 of Mortury Building Work

Item Sr No. 9.5 of Under Ground Water Tank

Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCAD Aenabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.37)

Item Sr No. 1.14A of Building Work

Item Sr No. 1.14B of Building Work

Item Sr No. 2.14 of Mortury Building Work

Item Sr No. 9.6 of Under Ground Water Tank

Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCAD Aenabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.37, First Floor)

... (Item No. 25.37, Second Floor)

... (Item No. 25.37, Third Floor)

... (Item No. 25.37, Fourth Floor)

Providing and laying Cast in situ/Ready Mixcement concrete M-35 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.56)

Item Sr No. 1.15A of Building Work

Item Sr No. 1.15B of Building Work

Item Sr No. 2.15 of Mortury Building Work

Item Sr No. 9.7 of Under Ground Water Tank

Providing and laying Cast in situ/Ready Mixcement concrete M-35 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.56, First Floor)

... (Item No. 25.56, Second Floor)

... (Item No. 25.56, Third Floor)

... (Item No. 25.56, Fourth Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.76)

Item Sr No. 1.16A of Building Work

Item Sr No. 1.16B of Building Work

Item Sr No. 2.16 of Mortury Building Work

Item Sr No. 9.8 of Under Ground Water Tank

Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.76, First Floor)

... (Item No. 25.76, Second Floor)

... (Item No. 25.76, Third Floor)

... (Item No. 25.76, Fourth Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.19)

Item Sr No. 1.17A of Building Work

Item Sr No. 1.17B of Building Work

Item Sr No. 9.9 of Under Ground Water Tank

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.19, First Floor)

... (Item No. 26.19, Second Floor)

... (Item No. 26.19, Third Floor)

... (Item No. 26.19, Fourth Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/granite/quartzite/gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.23)

Item Sr No. 1.18A of Building Work

Item Sr No. 1.18B of Building Work

Item Sr No. 2.17 of Mortury Building Work

Item Sr No. 5.8 of Compound Wall and Gate

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/granite/quartzite/gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.23, First Floor)

... (Item No. 26.23, Second Floor)

... (Item No. 26.23, Third Floor)

... (Item No. 26.23, Fourth Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/quartzite/granite/gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.25)

Item Sr No. 1.19A of Building Work

Item Sr No. 1.19B of Building Work

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/quartzite/granite/gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.25, First Floor)

... (Item No. 26.25, Second Floor)

... (Item No. 26.25, Third Floor)

... (Item No. 26.25, Fourth Floor)

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.07)

Item Sr No. 1.20A of Building Work

Item Sr No. 2.18 of Mortury Building Work

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.07, First Floor)

... (Item No. 26.07, Second Floor)

... (Item No. 26.07, Third Floor)

... (Item No. 26.07, Fourth Floor)

Providing and fixing in position HCRM/CRS(Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Item No. 26.34)

Item Sr No. 1.21A of Building Work

Item Sr No. 1.21B of Building Work

Item Sr No. 2.19 of Mortury Building Work

Item Sr No. 9.10 of Under Ground Water Tank

Providing and fixing in position HCRM/CRS(Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Item No. 26.34, First Floor)

... (Item No. 26.34, Second Floor)

... (Item No. 26.34, Third Floor)

... (Item No. 26.34, Fourth Floor)

Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. (Item No. 27.01)

Item Sr No. 1.22 of Building Work

Item Sr No. 2.20 of Mortury Building Work

Providing Autoclaved areated concrete block masonry of approved manufacture confirming to IS 2185 Part III 1984 of size 600mm x 200mm and thickness 100, 150, 200 or 250mm using Ready to use BLOCK JOINT MORTAR1:6 in foundations and plinth of inner walls/external walls including bailing out water, striking joints on unexposed faces, racking out joints on exposed faces and watering complete. With Prior Approval of Concerned S.E. (Item No. 51.110)

Item Sr No. 1.23A of Building Work

Item Sr No. 2.21 of Mortury Building Work

Providing Autoclaved areated concrete block masonry of approved manufacture confirming to IS 2185 Part III 1984 of size 600mm x 200mm and thickness 100, 150, 200 or 250mm using Ready to use BLOCK JOINT MORTAR1:6 in foundations and plinth of inner walls/external walls including bailing out water, striking joints on unexposed faces, racking out joints on exposed faces and watering complete. With Prior Approval of Concerned S.E. (Item No. 51.110, First Floor)

... (Item No. 51.110, Second Floor)

... (Item No. 51.110, Third Floor)

... (Item No. 51.110, Fourth Floor)

Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (Item No. 27.05)

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (Item No. 32.04)

Item Sr No. 1.25A of Building Work

Item Sr No. 1.25B of Building Work

Item Sr No. 2.22 of Mortury Building Work

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (Item No. 32.04, First Floor)

... (Item No. 32.04, Second Floor)

... (Item No. 32.04, Third Floor)

Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete (Item No. 32.06)

Item Sr No. 1.26A of Building Work

Item Sr No. 1.26B of Building Work

Item Sr No. 2.23 of Mortury Building Work

Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete (Item No. 32.06, First Floor)

... (Item No. 32.06, Second Floor)

... (Item No. 32.06, Third Floor)

... (Item No. 32.06, Fourth Floor)

Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete. (Item No. 32.27)

Item Sr No. 1.27A of Building Work

Item Sr No. 1.27B of Building Work

Item Sr No. 2.24 of Mortury Building Work

Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete. (Item No. 32.27, First Floor)

... (Item No. 32.27, Second Floor)

... (Item No. 32.27, Third Floor)

... (Item No. 32.27, Fourth Floor)

Providing and applying plaster/wall punning with plaster of paris(with plaster of paris material) in 10 to 13 millimeter thickness to previously plastered surface/or on newly brick surface(Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. (Item No. 32.30)

Item Sr No. 1.28A of Building Work

Item Sr No. 1.28B of Building Work

Item Sr No. 2.25 of Mortury Building Work

Providing and applying plaster/wall punning with plaster of paris(with plaster of paris material) in 10 to 13 millimeter thickness to previously plastered surface/or on newly brick surface(Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. (Item No. 32.30, First Floor)

... (Item No. 32.30, Second Floor)

... (Item No. 32.30, Third Floor)

... (Item No. 32.30, Fourth Floor)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (Item No. 32.11)

Item Sr No. 1.29A of Building Work

Item Sr No. 2.26 of Mortury Building Work

Item Sr No. 5.11 of Compound Wall and Gate

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (Item No. 32.11, First Floor)

... (Item No. 32.11, Second Floor)

... (Item No. 32.11, Third Floor)

... (Item No. 32.11, Fourth Floor)

Providing patti/band 100mm wide on plastered surface 12mm to 15mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. (Item No. 32.24)

Item Sr No. 1.30A of Building Work

Item Sr No. 2.27 of Mortury Building Work

Providing patti/band 100mm wide on plastered surface 12mm to 15mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. (Item No. 32.24, First Floor)

... (Item No. 32.24, Second Floor)

... (Item No. 32.24, Third Floor)

... (Item No. 32.24, Fourth Floor)

Dry wall cladding with clay tile; Designing, supplying and fixing of Clay tile of Wienerberger(Red Series or Grey Series) or Equivalent with suitable size and thickness not less than 20mm as per manufacturer with approved colour and pattern with composition of finest powdered clay and colour mixtures. The clay tile shall be fixed on the suitable farming system by using continuous aluminium profiled section as per manufacturer with suitable size and spacing to withstand the structural design criteria specifled in the technical specification by using necessary HDG brackets, SS316 grade anchor bolts etc as per manufacturer specification. Cladding joints should be with open groove system. with prior approval of concerned Superitending Engineer. (Item No. 50.25)

... (Item No. 50.25, First Floor)

Providing and applying laying Aggregate plaster in granite/marble stones, as decorative finish to give granite/marble like appearance to concrete, brick or block surfaces in all position including preparation of surface smoothly, evenly by racking of joints in case of Brick or block work including backing layer of 12mm thick with cement mortar 1:3 with 2% integral cement water proofing compound, roughening for wall keying hardening and drying the surface for a minimum five days gaps including second coat of cement lime mortar into a proportion 1:4 preparing the surface for three coat of marble finish plaster giving a thin coat of white cement and two parts of course calcite powder, applying the mortar with steel float on the surface in proper evenness applying at coat of white cement and lime to set a smooth finish then applying a thin coat of slurry made of white cement and black oxide colour in required proportion by the steel float to get black streaks on the surface and curing the surface for two days including all materials and labour etc. complete. (Item No. 32.29)

... (Item No. 32.29, First Floor)

... (Item No. 32.29, Second Floor)

... (Item No. 32.29, Third Floor)

... (Item No. 32.29, Fourth Floor)

Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. (Item No. 32.32)

... (Item No. 32.32, First Floor)

... (Item No. 32.32, Second Floor)

... (Item No. 32.32, Third Floor)

... (Item No. 32.32, Fourth Floor)

Providing and Fixing GRC Grill, 20 to 25 mm thick as per approved design and drawing, including preparing of mould as per design, lift lead, painting with 3 coats. Of approved paint, square pipe & 35 x 50 mm size section as per design including scaffolding ets. Complete Approved Rate

... (First Floor)

... (Second Floor)

... (Third Floor)

Providing fine cement finish 1.5mm thick over green plaster surface including scaffolding curing etc. complete. (Item No. 32.21)

Item Sr No. 1.35 of Building Work

Item Sr No. 9.11 of Under Ground Water Tank

Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire etc. complete. (Item No. 32.26)

Item Sr No. 1.36A of Building Work

Item Sr No. 1.36B of Building Work

Item Sr No. 2.28 of Mortury Building Work

Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire etc. complete. (Item No. 32.26, First Floor)

... (Item No. 32.26, Second Floor)

... (Item No. 32.26, Third Floor)

... (Item No. 32.26, Fourth Floor)

Providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition as per drawing and technical specifications etc. complete. (Item No. 12.72)

... (Item No. 12.72)

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness incm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding incm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. (Item No. 31.26)

Item Sr No. 1.38A of Building Work

Item Sr No. 2.29 of Mortury Building Work

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness incm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding incm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. (Item No. 31.26, First Floor)

... (Item No. 31.26, Second Floor)

... (Item No. 31.26, Third Floor)

... (Item No. 31.26, Fourth Floor)

Waterproofing Treatment to new Toilet/bathroom by using Polymeric Cementitious Membrane as approved by Engineer in charge, followed by 112mm thick brick bat coba covered with 20mm mortar finish. If there are cracks on the bare slab, open the crack in V Groove and fill it with ready to use repair polymer modified mortar based on special cements, aldehyde based polymers with thixotropy modifying agents. If there are lots of honeycombs and identified bad patches of concrete the same should be grouted as per the instructions of site incharge.(The grouting shall be paid separately). Clean the entire surface thoroughly and over this prepared surface, apply three coats of polymeric Cementitious waterproofing coating having a non-toxic, 2-(methoxycarbonyl)-1-propene-Butyl-2 propenoate(MPBP) based polymeric waterproofing solution as approved by Engineer in charge. Provide and lay 112mm average thicknes of brick bat coba in cement mortar 1:5 over 12mm thickCM 1:3 bedding with one pouch of 330 grams of thorough blend of special cements, aldehyde based polymers, shrinkage compensating agents as approved by Engineer in charge per 50 Kg bag of cement and finishing with 20mm thick cement plaster in cement mortar 1:3 by mixing one 330 grams pouch of above admixture per 50 Kg bag of cement, including all lead, lifts and laid to proper slope to drain off water entirely preparing bell mouth including watta, beveled or champhered portion at the junction of wall and work up to a height of 300mm or as directed and including finishing the top layer of waterproofing treatement with false marking of 30cm x 30cm or as directed, curing and covering the whole treatment. MPBP Polymeric Waterproofing Coating for Concrete and Masonry should have following minimum properties:1) Elongation %(ASTM D412-2016): @ 100% 2) Tensile Strength N/mm2(ASTM D412-2016): 3.3 3) Specific Gravity: 1.02 0.02 4) Total Solids(ASTM D1644-2012): 43.98 5) Hardness Shore A(ASTM D2240-2015): 82 (Item No. 52.13)

Item Sr No. 1.39A of Building Work

Item Sr No. 1.39B of Building Work

Waterproofing Treatment to new Toilet/bathroom by using Polymeric Cementitious Membrane as approved by Engineer in charge, followed by 112mm thick brick bat coba covered with 20mm mortar finish. If there are cracks on the bare slab, open the crack in V Groove and fill it with ready to use repair polymer modified mortar based on special cements, aldehyde based polymers with thixotropy modifying agents. If there are lots of honeycombs and identified bad patches of concrete the same should be grouted as per the instructions of site incharge.(The grouting shall be paid separately). Clean the entire surface thoroughly and over this prepared surface, apply three coats of polymeric Cementitious waterproofing coating having a non-toxic, 2-(methoxycarbonyl)-1-propene-Butyl-2 propenoate(MPBP) based polymeric waterproofing solution as approved by Engineer in charge. Provide and lay 112mm average thicknes of brick bat coba in cement mortar 1:5 over 12mm thickCM 1:3 bedding with one pouch of 330 grams of thorough blend of special cements, aldehyde based polymers, shrinkage compensating agents as approved by Engineer in charge per 50 Kg bag of cement and finishing with 20mm thick cement plaster in cement mortar 1:3 by mixing one 330 grams pouch of above admixture per 50 Kg bag of cement, including all lead, lifts and laid to proper slope to drain off water entirely preparing bell mouth including watta, beveled or champhered portion at the junction of wall and work up to a height of 300mm or as directed and including finishing the top layer of waterproofing treatement with false marking of 30cm x 30cm or as directed, curing and covering the whole treatment. MPBP Polymeric Waterproofing Coating for Concrete and Masonry should have following minimum properties:1) Elongation %(ASTM D412-2016): @ 100% 2) Tensile Strength N/mm2(ASTM D412-2016): 3.3 3) Specific Gravity: 1.02 0.02 4) Total Solids(ASTM D1644-2012): 43.98 5) Hardness Shore A(ASTM D2240-2015): 82 (Item No. 52.13, First Floor)

... (Item No. 52.13, Second Floor)

... (Item No. 52.13, Third Floor)

... (Item No. 52.14, Third Floor)

... (Item No. 52.14, Fourth Floor)

Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75mm, 3.18mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150mm x 44.5mm x 3.00mm thick top rails 47.62 x 44.45mm x 3.00mm thick, vertical style 47.62 x 44.45mm, 3.00mm thick and for shutter plain glass panes 5mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc., I.S.I. mark, heavy duty, Hydraulic floor spring of 150Kilogramcapacity, having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length aluminium tower bolts, 150mm dia. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipment etc.complete (Item No. 39.63)

Providing & fixing factory-made Single leaf 2 hour fire rated door as per IS 3614 Part 2 & BS 476 Part 20 & 22, tested to UL 10 C and conforming to NFPA 80, tested at NTL/CBRI/ARAI of Plain Steel finish type with a.) Frame of size 143x58mm and thickness of 1.6mm thick skin pass galvanized iron sheet(Conform to IS 277) formed to single or double rebate profile b.) Shutter of 46mm thickness and constructed from 1.2mm thick skin pas galvanized iron sheet(Conform to IS 277) infill Rockwool/Mineral wool/Honey comb craft paper c.) Vision glass of 5mm thick clear/wired glass Circular or Rectangular d.) Finish : Primed with zinc phosphate stoving primer and finished with Polyurethane aliphatic grade or epoxy paint as required of thickness 60 micron e.) Accessories : Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges, Mortise sash lock with lever handle, Mortise dead bolt, Mortise latch, Door closer, Panic bar and external trim lock and Flush bolts complete. (Item No. 51.97)

Item Sr No. 1.42A of Building Work

Item Sr No. 1.42B of Building Work

Item Sr No. 2.32 of Mortury Building Work

Providing & fixing factory-made Single leaf 2 hour fire rated door as per IS 3614 Part 2 & BS 476 Part 20 & 22, tested to UL 10 C and conforming to NFPA 80, tested at NTL/CBRI/ARAI of Plain Steel finish type with a.) Frame of size 143x58mm and thickness of 1.6mm thick skin pass galvanized iron sheet(Conform to IS 277) formed to single or double rebate profile b.) Shutter of 46mm thickness and constructed from 1.2mm thick skin pas galvanized iron sheet(Conform to IS 277) infill Rockwool/Mineral wool/Honey comb craft paper c.) Vision glass of 5mm thick clear/wired glass Circular or Rectangular d.) Finish : Primed with zinc phosphate stoving primer and finished with Polyurethane aliphatic grade or epoxy paint as required of thickness 60 micron e.) Accessories : Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges, Mortise sash lock with lever handle, Mortise dead bolt, Mortise latch, Door closer, Panic bar and external trim lock and Flush bolts complete. (Item No. 51.97, First Floor)

... (Item No. 51.97, Second Floor)

Providing and fixing fiber glass reinforced polyster door shutter 35mm thick as per IS 14856(2000)(Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. (Item No. 39.59)

Item Sr No. 1.43A of Building Work

Item Sr No. 1.43B of Building Work

Item Sr No. 2.33 of Mortury Building Work

Providing and fixing fiber glass reinforced polyster door shutter 35mm thick as per IS 14856(2000)(Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. (Item No. 39.59, First Floor)

... (Item No. 39.59, Second Floor)

... (Item No. 39.59, Third Floor)

... (Item No. 39.59, Fourth Floor)

Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (Item No. 39.09)

Item Sr No. 1.44A of Building Work

Item Sr No. 1.44B of Building Work

Item Sr No. 2.34 of Mortury Building Work

Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (Item No. 39.09, First Floor)

... (Item No. 39.09, Second Floor)

... (Item No. 39.09, Third Floor)

Providing and fixing solid core flush door shutter in double leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (Item No. 39.95)

Item Sr No. 1.45A of Building Work

Item Sr No. 1.45B of Building Work

Providing and fixing solid core flush door shutter in double leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (Item No. 39.95, First Floor)

... (Item No. 39.95, Second Floor)

... (Item No. 39.95, Third Floor)

Fire Door 45mm 1HR FRL(60/60) 3 Criteria-INTEGRITY/INSULATION/STABILITY WOODEN DOOR-Fire Door Tested in accordance to IS: 3614 Part 2. Providing 60 min Fire rated doors system duly tested for 3 criteria-Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 at National Test House, Govt of India laborator and/or with Central Building Research Institute, Govt of India undertaking with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability(i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140 C above the ambient temperature on the exposed surface of the shutter. The fire doors are tested with NCBN technology("Non Combustible by Nature"). with prior approval of concerned Superitending Engineer. :: c) Vision Panel: 1 HR rated E Class clear high stress fire rated glass is pre fabricated strategically inside theshutter structure with 10mm inside the shutter on all sides with U-glazing. An additional insulated powdercoated 'Z' channel of 16 swg MS sheet to be fixed for reinforcement of the joints. With clear fire resistant glass panes 11mm thick having minimum 120 minutes fire Description (Item No. 50.81c)

Item Sr No. 1.46A of Building Work

Item Sr No. 1.46B of Building Work

Item Sr No. 2.35 of Mortury Building Work

Fire Door 45mm 1HR FRL(60/60) 3 Criteria-INTEGRITY/INSULATION/STABILITY WOODEN DOOR-Fire Door Tested in accordance to IS: 3614 Part 2. Providing 60 min Fire rated doors system duly tested for 3 criteria-Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 at National Test House, Govt of India laborator and/or with Central Building Research Institute, Govt of India undertaking with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability(i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140 C above the ambient temperature on the exposed surface of the shutter. The fire doors are tested with NCBN technology("Non Combustible by Nature"). with prior approval of concerned Superitending Engineer. :: c) Vision Panel: 1 HR rated E Class clear high stress fire rated glass is pre fabricated strategically inside theshutter structure with 10mm inside the shutter on all sides with U-glazing. An additional insulated powdercoated 'Z' channel of 16 swg MS sheet to be fixed for reinforcement of the joints. With clear fire resistant glass panes 11mm thick having minimum 120 minutes fire Description (Item No. 50.81c, First Floor)

... (Item No. 50.81c, Second Floor)

Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete (Item No. 39.01)

Item Sr No. 1.47A of Building Work

Item Sr No. 1.47B of Building Work

Item Sr No. 2.36 of Mortury Building Work

Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete (Item No. 39.01, First Floor)

... (Item No. 39.01, Second Floor)

Providing and fixing collapsible steel gate in one/two leaves with hot rolled vertical channels of 18 x 9 x 3mm minimum size, crossings of M.S. flats of size 18 x 5mm T or E section for runner of minimum 40 x 6mm size for flange, M.S. flat for top runner of minimum size 40 x 12mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6mm max. spacing of vertical channels be 100mm enclosed gate position and clear space of 150mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete.(I.S. 105211983). (Item No. 39.26)

Item Sr No. 1.48 of Building Work

Item Sr No. 2.37 of Mortury Building Work

Providing and fixing of factory made uPVC Sliding window & door(White Colour) complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm(+-0.2mm), duly reinforced with G.I. section 1.5mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256-more than 700Kj/m2 2 Vicat Softening Temperature EN ISO 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner(a) For the tensile bending test EN 514 Shall not be < 25 N/mm2(b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476-Part 7 Classification 1 8 Ignitability Evaluation BS : 476-Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa All corners of frame and sash will be fusion welded. After placing 5mm Float Annealed glass in the sash, uPVC glazing bead, interlock, EPDM/TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window/Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten(10) years against non-uniform discoloration, wrapping and rotting under general use. :: 3 Track with Mesh-2 Glass Sash + 1 Mesh Sash(Each sash shall be half of width of window)(Big Series) Window frame of size 122 x 54mm & Sash of size 64 x 47mm. (Item No. 54.08c)

Item Sr No. 1.49A of Building Work

Item Sr No. 1.49B of Building Work

Item Sr No. 2.38 of Mortury Building Work

Providing and fixing of factory made uPVC Sliding window & door(White Colour) complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm(+-0.2mm), duly reinforced with G.I. section 1.5mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256-more than 700Kj/m2 2 Vicat Softening Temperature EN ISO 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner(a) For the tensile bending test EN 514 Shall not be < 25 N/mm2(b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476-Part 7 Classification 1 8 Ignitability Evaluation BS : 476-Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa All corners of frame and sash will be fusion welded. After placing 5mm Float Annealed glass in the sash, uPVC glazing bead, interlock, EPDM/TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window/Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten(10) years against non-uniform discoloration, wrapping and rotting under general use. :: 3 Track with Mesh-2 Glass Sash + 1 Mesh Sash(Each sash shall be half of width of window)(Big Series) Window frame of size 122 x 54mm & Sash of size 64 x 47mm. (Item No. 54.08c, First Floor)

... (Item No. 54.08c, Second Floor)

... (Item No. 54.08c, Third Floor)

... (Item No. 54.08c, Fourth Floor)

Providing and fixing of factory made uPVC Sliding window & door(White Colour) complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm(+-0.2mm), duly reinforced with G.I. section 1.5mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256-more than 700Kj/m2 2 Vicat Softening Temperature EN ISO 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner(a) For the tensile bending test EN 514 Shall not be < 25 N/mm2(b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476-Part 7 Classification 1 8 Ignitability Evaluation BS : 476-Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa All corners of frame and sash will be fusion welded. After placing 5mm Float Annealed glass in the sash, uPVC glazing bead, interlock, EPDM/TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window/Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten(10) years against non-uniform discoloration, wrapping and rotting under general use. :: 2 Track 2/4 Sash(Big Series) window frame of size 67 x 54mm & Sash of size 64 x 47mm (Item No. 54.08a)

... (Item No. 54.08a, First Floor)

Providing and fixing of factory made uPVC casement window/Fixed Window & Casement Door(White Colour) comprising uPVC multi-chambered frame, Sash, & Mullion with wall thickness of 2.3mm(+-0.2mm), duly reinforced with G.I. section 1.5mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256-more than 700Kj/m2 2 Vicat Softening Temperature EN ISO 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner(a) For the tensile bending test EN 514 Shall not be < 25 N/mm2(b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476-Part 7 Classification 1 8 Ignitability Evaluation BS : 476-Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash will be fusion welded. Mullion shall be welded/screwed. EPDM/TPE Gasket shall be provided in all frame, sash & mullion, wherever necessary.Thereafter, 5mm Float Annealed glass shall be provided in the sash with the help of uPVC glazing bead and hardware, i.e., friction hinge & single point handle(in window) & 3D Hinges & Multipoint Lock(in door) shall be provided. Window/Door shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten(10) years against non-uniform discoloration, wrapping and rotting under general use. :: Fixed Window(Big Series) frame of size 67 x 62mm & Mullion(if required) of size 67 x 78mm. (Item No. 54.09c)

Item Sr No. 1.51A of Building Work

Item Sr No. 2.39 of Mortury Building Work

Providing and fixing of factory made uPVC casement window/Fixed Window & Casement Door(White Colour) comprising uPVC multi-chambered frame, Sash, & Mullion with wall thickness of 2.3mm(+-0.2mm), duly reinforced with G.I. section 1.5mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256-more than 700Kj/m2 2 Vicat Softening Temperature EN ISO 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner(a) For the tensile bending test EN 514 Shall not be < 25 N/mm2(b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476-Part 7 Classification 1 8 Ignitability Evaluation BS : 476-Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash will be fusion welded. Mullion shall be welded/screwed. EPDM/TPE Gasket shall be provided in all frame, sash & mullion, wherever necessary.Thereafter, 5mm Float Annealed glass shall be provided in the sash with the help of uPVC glazing bead and hardware, i.e., friction hinge & single point handle(in window) & 3D Hinges & Multipoint Lock(in door) shall be provided. Window/Door shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten(10) years against non-uniform discoloration, wrapping and rotting under general use. :: Fixed Window(Big Series) frame of size 67 x 62mm & Mullion(if required) of size 67 x 78mm. (Item No. 54.09c, First Floor)

... (Item No. 54.09c, Second Floor)

Providing and fixing of factory made uPVC Louver window(White Colour) comprising of uPVC multi-chambered with wall thickness of 2.3mm(+-0.2mm), duly reinforced with 1.5mm thick G. I. Section. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specifie Parameter 1 Tensile Impact Strength ISO 8256-more than 700Kj/m2 2 Vicat Softening Temperature EN ISO 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner(a) For the tensile bending test EN 514 Shall not be < 25 N/mm2(b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476-Part 7 Classification 1 8 Ignitability Evaluation BS : 476-Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame shall be fusion welded. Both vertical sides of the frame, adjustable louver mechanism having one lever or fixed louver bracket shall be fitted with the of 4mm Frosted Annealed glass. Window will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten(10) years against non-uniform discoloration, wrapping and rotting under general use. a.Louver Window(Big Series) frame of size 67 x 62mm & Mullion(if required) of size 67 x 78mm. (Item No. 54.11)

Item Sr No. 1.52A of Building Work

Item Sr No. 1.52B of Building Work

Item Sr No. 2.40 of Mortury Building Work

Providing and fixing of factory made uPVC Louver window(White Colour) comprising of uPVC multi-chambered with wall thickness of 2.3mm(+-0.2mm), duly reinforced with 1.5mm thick G. I. Section. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specifie Parameter 1 Tensile Impact Strength ISO 8256-more than 700Kj/m2 2 Vicat Softening Temperature EN ISO 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner(a) For the tensile bending test EN 514 Shall not be < 25 N/mm2(b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476-Part 7 Classification 1 8 Ignitability Evaluation BS : 476-Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame shall be fusion welded. Both vertical sides of the frame, adjustable louver mechanism having one lever or fixed louver bracket shall be fitted with the of 4mm Frosted Annealed glass. Window will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten(10) years against non-uniform discoloration, wrapping and rotting under general use. a.Louver Window(Big Series) frame of size 67 x 62mm & Mullion(if required) of size 67 x 78mm. (Item No. 54.11, First Floor)

... (Item No. 54.11, Second Floor)

... (Item No. 54.11, Third Floor)

Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/square metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. (Item No. 40.02)

Item Sr No. 1.53A of Building Work

Item Sr No. 1.53B of Building Work

Item Sr No. 2.41 of Mortury Building Work

Item Sr No. 5.12 of Compound Wall and Gate

Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/square metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. (Item No. 40.02, First Floor)

... (Item No. 40.02, Second Floor)

... (Item No. 40.02, Third Floor)

... (Item No. 40.02, Fourth Floor)

Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. (Item No. 44.10)

Item Sr No. 1.54 of Building Work

Item Sr No. 5.13 of Compound Wall and Gate

Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50mm, 8 gauge thick and fixed 75mm above ground level on vertical M.S. Angles of 40 x 40 x 6mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5mm size and vertical M.S. flat 35 x 5mm and 25 x 5mm horizontal including cross support of 40 x 40 x 6mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670mm including 3 coats of oil painting etc. complete. (Item No. 46.39)

Supply & Fixing of Rock/Stone Finished outdoor vitrified flooring Tiles 16mm thick and required width wide in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete. with prior approval of concerned Superitending Engineer. (Item No. 50.14)

Item Sr No. 1.56A of Building Work

Item Sr No. 1.56B of Building Work

Item Sr No. 2.42 of Mortury Building Work

Supply & Fixing of Rock/Stone Finished outdoor vitrified flooring Tiles 16mm thick and required width wide in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete. with prior approval of concerned Superitending Engineer. (Item No. 50.14, First Floor)

... (Item No. 50.14, Second Floor)

... (Item No. 50.14, Third Floor)

Providing and laying ceramic tiles having size 30cm. x 60cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete. (Item No. 33.27)

... (Item No. 33.27, First Floor)

... (Item No. 33.27, Second Floor)

Providing and laying vitrified mirror/glossy finish tiles decorative type having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS. 15622-2006(group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. (Item No. 33.40)

... (Item No. 33.40, First Floor)

... (Item No. 33.40, Second Floor)

Providing and laying vitrified mirror/glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS. 15622-2006(group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete (Item No. 33.41)

... (Item No. 33.41, First Floor)

... (Item No. 33.41, Second Floor)

Providing and laying matt finish ceramic tiles of having size 30cm x 30cm confirming to I.S.15622/2006(group D II-A) and 7 to 8mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. (Item No. 33.24)

Item Sr No. 1.60A of Building Work

Item Sr No. 2.43 of Mortury Building Work

Providing and laying matt finish ceramic tiles of having size 30cm x 30cm confirming to I.S.15622/2006(group D II-A) and 7 to 8mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. (Item No. 33.24, First Floor)

... (Item No. 33.24, Second Floor)

... (Item No. 33.24, Third Floor)

Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. (Item No. 33.68)

Item Sr No. 1.61A of Building Work

Item Sr No. 1.61B of Building Work

Item Sr No. 2.44 of Mortury Building Work

Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. (Item No. 33.68, First Floor)

... (Item No. 33.68, Second Floor)

... (Item No. 33.68, Third Floor)

... (Item No. 33.68, Fourth Floor)

Providing and laying vitrified matt finish tiles having size 590mm to 605mm x to 605mm of 8 to 10mm thickness and confirming IS. 15622-2006(Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. (Item No. 33.43)

Item Sr No. 1.62A of Building Work

Item Sr No. 1.62B of Building Work

Item Sr No. 2.45 of Mortury Building Work

Providing and laying vitrified matt finish tiles having size 590mm to 605mm x to 605mm of 8 to 10mm thickness and confirming IS. 15622-2006(Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. (Item No. 33.43, First Floor)

... (Item No. 33.43, Second Floor)

... (Item No. 33.43, Third Floor)

... (Item No. 33.43, Fourth Floor)

Providing and laying Antiskid Ceramic tiles of approved quality of size 30cm x 30cm and confirming to IS 15622-2006(Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. (Item No. 33.67)

Item Sr No. 1.63A of Building Work

Item Sr No. 1.63B of Building Work

Providing and laying Antiskid Ceramic tiles of approved quality of size 30cm x 30cm and confirming to IS 15622-2006(Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. (Item No. 33.67, First Floor)

... (Item No. 33.67, Second Floor)

... (Item No. 33.67, Third Floor)

Providing and laying in situ cement concrete M20 with tremix treatment for 100mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. (Item No. 33.30)

Item Sr No. 1.64 of Building Work

Item Sr No. 2.46 of Mortury Building Work

Providing and laying in situ cement concrete M-30 with tremix treatment for 200mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen(excluding reinforcement) with coarse and fine aggregate(natural sand/VSI grade finely washed crushed sand) etc. complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. (Item No. 5.22a)

Item Sr No. 1.65 of Building Work

Item Sr No. 6.6 of Internal Road

Providing and laying in position flooring of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18mm to 20mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. (Item No. 33.34)

Providing and fixing machine cut machine polished 18mm to 20mm thick telephone black/Amba White/Cat bary brown/RBI red/Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. (Item No. 33.35)

Supply & Fixing of Rock/Stone Finished Full Body Vitrifid Steptiles with thick Bullnose for Ready to install Treads and Risers, 16mm thick and of required width in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete. with prior approval of concerned Superitending Engineer. (Item No. 50.18)

Item Sr No. 1.68A of Building Work

Item Sr No. 1.68B of Building Work

Supply & Fixing of Rock/Stone Finished Full Body Vitrifid Steptiles with thick Bullnose for Ready to install Treads and Risers, 16mm thick and of required width in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete. with prior approval of concerned Superitending Engineer. (Item No. 50.18, First Floor)

... (Item No. 50.18, Second Floor)

... (Item No. 50.18, Third Floor)

... (Item No. 50.18, Fourth Floor)

Supply & Fixing of Full Body Vitrifid Steptiles Ready to install Treads and Risers 16mm thick, required width and required finish in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning etc complete. with prior approval of concerned Superitending Engineer. (Item No. 50.16)

Item Sr No. 1.69A of Building Work

Item Sr No. 1.69B of Building Work

Supply & Fixing of Full Body Vitrifid Steptiles Ready to install Treads and Risers 16mm thick, required width and required finish in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning etc complete. with prior approval of concerned Superitending Engineer. (Item No. 50.16, First Floor)

... (Item No. 50.16, Second Floor)

... (Item No. 50.16, Third Floor)

... (Item No. 50.16, Fourth Floor)

Providing and laying vitrified stone effect finish tiles having size 590 to 605mm x 590 to 605mm of 8 to 10mm thickness and confirming to IS. 15622-2006(Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. (Item No. 33.47)

Item Sr No. 1.70A of Building Work

Item Sr No. 1.70B of Building Work

Providing and laying vitrified stone effect finish tiles having size 590 to 605mm x 590 to 605mm of 8 to 10mm thickness and confirming to IS. 15622-2006(Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. (Item No. 33.47, First Floor)

... (Item No. 33.47, Second Floor)

... (Item No. 33.47, Third Floor)

... (Item No. 33.47, Fourth Floor)

Providing and fixing machine cut mirror polished 18mm to 20mm thick telephone black granite/Amba White/Cat bary brown/RBI red/Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish (Item No. 33.36)

Item Sr No. 1.71A of Building Work

Item Sr No. 1.71B of Building Work

Providing and fixing machine cut mirror polished 18mm to 20mm thick telephone black granite/Amba White/Cat bary brown/RBI red/Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish (Item No. 33.36, First Floor)

... (Item No. 33.36, Second Floor)

... (Item No. 33.36, Third Floor)

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600mm x 450mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30mm thick supports with kadappah top 35 to 40mm thick and polished granite 16 to 20mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15cm height and top granite of 75 x 40cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete.(Platform top size 5.00m x 0.60m and height is 0.75 m) (Item No. 41.78)

Item Sr No. 1.72A of Building Work

Item Sr No. 1.72B of Building Work

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600mm x 450mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30mm thick supports with kadappah top 35 to 40mm thick and polished granite 16 to 20mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15cm height and top granite of 75 x 40cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete.(Platform top size 5.00m x 0.60m and height is 0.75 m) (Item No. 41.78, First Floor)

... (Item No. 41.78, Second Floor)

... (Item No. 41.78, Third Floor)

Providing and fixing 1.5mm thick polyvenyl venyl chloride flooring including leveling the base with white cement including pasting with appropriate material cleaning the surface etc. complete (Item No. 33.39)

... (Item No. 33.39, First Floor)

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete. (Item No. 33.56)

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. (Item No. 32.34)

Item Sr No. 1.75A of Building Work

Item Sr No. 1.75B of Building Work

Item Sr No. 2.47 of Mortury Building Work

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. (Item No. 32.34, First Floor)

... (Item No. 32.34, Second Floor)

... (Item No. 32.34, Third Floor)

... (Item No. 32.34, Fourth Floor)

Providing and applying boiled linseed oil in two coats to the new wood work, including knotting, preparing the surface, scaffolding etc. complete as directed. (Item No. 34.02)

Item Sr No. 1.76 of Building Work

Item Sr No. 2.48 of Mortury Building Work

Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. (Item No. 35.21)

Item Sr No. 1.77A of Building Work

Item Sr No. 1.77B of Building Work

Item Sr No. 2.49 of Mortury Building Work

Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. (Item No. 35.21, First Floor)

... (Item No. 35.21, Second Floor)

... (Item No. 35.21, Third Floor)

... (Item No. 35.21, Fourth Floor)

Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity.(With prior approval of S.E.) (Item No. 36.20)

Item Sr No. 1.78A of Building Work

Item Sr No. 1.78B of Building Work

Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity.(With prior approval of S.E.) (Item No. 36.20, First Floor)

... (Item No. 36.20, Second Floor)

... (Item No. 36.20, Third Floor)

... (Item No. 36.20, Fourth Floor)

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) etc. complete. (Item No. 36.11)

Item Sr No. 1.79A of Building Work

Item Sr No. 1.79B of Building Work

Item Sr No. 2.50 of Mortury Building Work

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) etc. complete. (Item No. 36.11, First Floor)

... (Item No. 36.11, Second Floor)

... (Item No. 36.11, Third Floor)

... (Item No. 36.11, Fourth Floor)

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item number 15 to 18 prior approval of Superintending Engineer will be necessary (Item No. 35.26)

Item Sr No. 1.80A of Building Work

Item Sr No. 2.51 of Mortury Building Work

Item Sr No. 5.14 of Compound Wall and Gate

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item number 15 to 18 prior approval of Superintending Engineer will be necessary (Item No. 35.26, First Floor)

... (Item No. 35.26, Second Floor)

... (Item No. 35.26, Third Floor)

... (Item No. 35.26, Fourth Floor)

Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete (Item No. 40.07)

Item Sr No. 1.81A of Building Work

Item Sr No. 1.81B of Building Work

Item Sr No. 2.52 of Mortury Building Work

Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete (Item No. 40.07, First Floor)

... (Item No. 40.07, Second Floor)

... (Item No. 40.07, Third Floor)

... (Item No. 40.07, Fourth Floor)

Providing and fixing mild steel grill railing weighing 15Kilogram/square metre. with PVC handrail cover and newel post for staircases, including fabricating, fixtures, drilling holes in concrete/other surface, erecting the grill work, necessary welding, fixing by nuts and bolts, fixing PVC handrail cover, with one coat of anticorrosive paint and two coats of oil painting with approved colour and shade, remaking the damaged surface, cleaning, etc. complete. Spec. number : As directed by Engineer in charge. (Item No. 40.10)

Providing and Fixing mat finish stainless steel(of 302 grade) railing with top pipe of 50mm dia. and vertical pipe of 38mm dia at 0.60m c/c or as required and horizontal pipes of 25mm dia in three rows, all pipes of 2mm thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75mm dia above newel post of 75mm diameter etc. complete(Prior approval of sample and brand by Ex.Engineer is necessary before use) (Item No. 40.08)

... (Item No. 40.08, First Floor)

... (Item No. 40.08, Second Floor)

... (Item No. 40.08, Third Floor)

Design, supply, fabrication & erection of approved structural glazing using specially designed Vertical Mullion & HorizontalTransoms ofRequired size & as per architect's approved Grid work with aluminium rectangular sections to be fixed in masonary at interval of eachfloor on concrete slab with 80 mm x 100 mm x 5mm thick galvanized M & Langle fixed on wall side with raw bolt size of 10 mm x 90 mm with necessary bolts & washers / nuts for the plumb the linelevels. the glass panel's shall be fixed on a specially designed architectural sub- frame using Dow Corning 995 strural sealant & GE Silicon (SSG - 4000) sub frame would be fixed on main frame grid in amanner that no aluminium frame is visible from outside & groovesbetween the glass panel shall be filled with weather sealant of Dow corning 789 / GE Sil proof to made it air tight, water proof & dustfree thus giving it a flush look outside. Glass will be of 6 mm thickGlaverbel reflective type with heat strenghthened

... (First Floor)

... (Second Floor)

... (Third Floor)

Providing and Fixing Sun Louvre panels roll formed, 0.6mm thick, pre-painted stove enameled aluminium strip of a corrosion resistant alloy, including necessary fitting etc. complete, as directed by Engineer in Charge. (Item No. 48.55)

... (Item No. 48.55, First Floor)

... (Item No. 48.55, Second Floor)

... (Item No. 48.55, Third Floor)

Providing, aupplying, fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4mm thick ACP sheet material consisting of 3mm thick FR grade mineral core following NBC part IV Fire and life safety(having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets(each 0.5mm thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymer resin(having 70:30 ratio of PVDF and acrylic) coating of approved colour and sg=hade on top face and polymer(service) coating of bottom face as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicon sealent, backer rods etc .overall weight of the ACP shall not be less than 7.5 Kilogram/square metre) (Item No. 51.100)

... (Item No. 51.100, First Floor)

... (Item No. 51.100, Second Floor)

... (Item No. 51.100, Third Floor)

Supplying and fixing of 6mm thick Exterior Compact Laminate or High Pressure Laminate of approved colour by approving authority with UV resistant Decorative colour paper on both side typically made out of multiple layers of craft papers and then impregnated with thermosetting phenolic resins, on top of it melamine treated barrier paper and decorative paper and wear layer on both the sides saturated with melamine resins and then covered with UV resistant acrylic resin layer which makes it extremely durable and weather resistant compressed together on extremely high pressure and hardened with electron beam curing to get the total desired thickness of 6mm matching European standard specification as per EN 438-part 6, protected with 60 Micron protective peel-off film on both side which in no case leave any adhesive mark over the panel surface after it is peeled off. Fixing of the same to be done on a supporting frame of 50mm X 5mm X 3mm powder coated aluminium box section to be spaced horizontally and vertically in 600mm X 600mm grid and fixed to building structure as per design through 50mmX50mmXmm 5mm MS angle bracket prefixed to masonry slab or columns with Hilti make anchor fastener along with all related hardware and fixtures. The panel should then be fixed on the Aluminium section with the help of pure polyester exterior grade colour coating rivets as per architectural drawings or as directed by Engineer-in-charge. Each panel should be riveted on substructure maintaining a gap of 6mm on all the sides between each Panel for Air circulation and expansion and contraction as per installation specifications provided by the manufacturer. The cost shall include all expenses related to storage, material handling, lifting, freight, labour, scaffolding etc as directed by Engineer-in-charge.(Prior permission of S.E. is necessary before inclusion of this item in estimate) (Item No. 51.236)

... (Item No. 51.236, First Floor)

... (Item No. 51.236, Second Floor)

... (Item No. 51.236, Third Floor)

Providing and Fixing signage made of 15mm thick solid white acrylic laser cut out letters for height upto 25 inches etc complete.

Providing and fixing of retro-reflectorised informatory sign board rectangular/Square in shape having area greater than 0.9 square metre made out of 2mm aluminum sheet bonded with white retro reflective sheeting of Class B(Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on two no. mild steel angle iron post 75mm x 75mm x 6mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B(Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. (Item No. 6.34a)

Item Sr No. 1.89 of Building Work

Item Sr No. 2.53 of Mortury Building Work

Providing and fixing 90cm x 60cm Marble plate engraving 10cm. height letter, figures including painting the lefters/figures with approved colour and shade complete (Item No. 44.11)

Item Sr No. 1.90 of Building Work

Item Sr No. 2.54 of Mortury Building Work

... (Item No. 39.72, First Floor)

... (Item No. 39.72, Second Floor)

... (Item No. 39.72, Third Floor)

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

... (First Floor)

... (Second Floor)

... (Third Floor)

Providing and fixing in position Gypsum board false ceiling with 12.5mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. (Item No. 38.51)

... (Item No. 38.51, First Floor)

... (Item No. 38.51, Second Floor)

... (Item No. 38.51, Third Floor)

Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete. (Item No. 38.48)

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. (Item No. 23.02, Fourth Floor)

Supply and Installation of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 12mm thick of 900mm(min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure(will be paid Separately) with 3 numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N(7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin(paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge. Colour: As per Approval. Approved Make: FLUX by DPI Daylighting or approved equivalent The 12mm thick panels shall be used for a roofing height of upto 15 mtrs. (Item No. 51.187, Fourth Floor)

Providing and fixing corrugated galvanised iron sheets of 0.63mm thick(24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.). (Item No. 38.04, Fourth Floor)

Providing and laying in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided(Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.11)

Item Sr No. 1.98 of Building Work

Item Sr No. 5.5 of Compound Wall and Gate

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.31)

Item Sr No. 1.99 of Building Work

Item Sr No. 5.6 of Compound Wall and Gate

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.50)

Item Sr No. 1.100 of Building Work

Item Sr No. 5.7 of Compound Wall and Gate

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.70)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means-Grading I(Using Screening Type A(13.2)mm Aggregate) (Item No. 3.18)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means-Grading II(Using Screening Type B(11.2mm) Aggregate) (Item No. 3.20)

Providing and constructing 75mm. thick Modified Penetration Macadam(MPM) road surface including all materials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken(by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates) (Item No. 3.35a)

Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5kg/10sqm.(VG-30 bulk bitumen rates are considered to arrive at rates) (Item No. 3.30)

BITUMINOUS MACADAM: -- Providing and laying bituminous macadam using crushed aggregate of Grading 1, premixed with bituminous binder, transported at site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 80/100mm compacted thickness with drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant as per IRC-27 2009 specified conditions and attachments such as electronic load sensor based belt conveyers, automatic synchronization of bitumen and aggregate fedder, built in dust controller system and PLC for Drum Mix plant, Sensor paver, and Vibratory roller excluding prime/Tack coat etc. complete -- Bitumen 3.30% of specified grade(VG-30 bulk bitumen rates are considered to arrive at rates) (Item No. 3.42)

BITUMINOUS CONCRETE:-Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50mm compacted thickness with specified grade of Bitumen, Excluding prime/tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler.(VG-30 bulk bitumen rates are considered to arrive at rates) (Item No. 3.48)

Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete.(VG-30 bulk bitumen rates are considered to arrive at rates) (Item No. 4.01)

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (Item No. 11.09)

Item Sr No. 1.109 of Building Work

Item Sr No. 3.41 of Water Supply and Sanitary System

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (Item No. 11.08)

Item Sr No. 1.110 of Building Work

Item Sr No. 3.40 of Water Supply and Sanitary System

Providing and laying in situ/ready mix M-20 cement concrete of trap/granite/quartzite/gneiss metal for approach slab/Rigid pavement including compacting, finishing, curing etc. complete.(excluding reinforcement)(with reversible drum type mixer/concrete batch mix plant(pan mixer) with SCADA with fine agreegates of required specifications(Natural sand/VSI sand finely washed etc), cement 6.40 bags/cumt) (Item No. 11.25)

Metal Beam Crash Barrier -- Type-A, W : Metal Beam Crash Barrier(Providing and erecting a W metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 70cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5mm spaced 2m centre to centre, 1.8m high, 1.1m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5mm, 330mm long complete as per clause 810)" (Item No. 7.30)

Providing water proof bedding for flooring of Bath and WC 25mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/-including ponding test etc. complete. (Item No. 31.05)

Providing cement based water proofing treatment to terraces(Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/-including ponding test etc. complete. (Item No. 31.04)

Providing and fixing Ball cock for 20 mm dia medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.

Providing and fixing Ball cock 25mm dia.P.V.C.FLOAT medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.

Providing and fixing Ball cock for 32mm dia medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.

Providing and fixing Ball cock 50mm dia.P.V.C.FLOAT medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete

Providing and fixing 40mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. (Item No. 42.36)

Providing and fixing 40mm diameter water meter with non-return valve including strainer, sockets/union nut and including water meter box making locking arrangements and lock. [Withoutchamber]. (Item No. 41.29)

Providing and fixing 45cm wide mild steel ladder of 40mm x 6mm mild steel flat stringers and steps of 18mm dia. mild steel bar for water tank including fixing it in(1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete.(Anti Corossive Paint) (Item No. 41.56)

... (Item No. 41.56, Fourth Floor)

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. (Item No. 42.02)

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. (Item No. 42.12)

Providing and fixing reinforced cement concrete cover of size 60cm x 45cm with frame over inspection chamber etc. complete. Heavy duty(160 Kilogram) (Item No. 42.70, Fourth Floor)

... (Item No. 42.70)

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. (Item No. 42.13)

Providing and fixing reinforced cement concrete cover of size 90cm x 45cm with frame over inspection chamber etc. complete. Heavy duty(225 Kilogram) (Item No. 42.68)

Providing and fixing on walls/ceiling/floor 20mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (Item No. 42.56)

Item Sr No. 3.10A of Water Supply and Sanitary System

Item Sr No. 3.10B of Water Supply and Sanitary System

Providing and fixing on walls/ceiling/floor 20mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (Item No. 42.56, First Floor)

... (Item No. 42.56, Second Floor)

... (Item No. 42.56, Third Floor)

... (Item No. 42.56, Fourth Floor)

Providing and fixing on walls/ceiling/floor 25mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (Item No. 42.57)

Item Sr No. 3.11A of Water Supply and Sanitary System

Item Sr No. 3.11B of Water Supply and Sanitary System

Providing and fixing on walls/ceiling/floor 25mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (Item No. 42.57, First Floor)

... (Item No. 42.57, Second Floor)

... (Item No. 42.57, Third Floor)

... (Item No. 42.57, Fourth Floor)

Providing and fixing on walls/ceiling/floor 32mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (Item No. 42.58)

Item Sr No. 3.12A of Water Supply and Sanitary System

Item Sr No. 3.12B of Water Supply and Sanitary System

Providing and fixing on walls/ceiling/floor 32mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (Item No. 42.58, First Floor)

... (Item No. 42.58, Second Floor)

... (Item No. 42.58, Third Floor)

... (Item No. 42.58, Fourth Floor)

Providing and fixing on walls/ceiling/floor 40mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (Item No. 42.59)

Item Sr No. 3.13A of Water Supply and Sanitary System

Item Sr No. 3.13B of Water Supply and Sanitary System

Providing and fixing on walls/ceiling/floor 40mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (Item No. 42.59, First Floor)

... (Item No. 42.59, Second Floor)

... (Item No. 42.59, Third Floor)

... (Item No. 42.59, Fourth Floor)

Providing and fixing on walls/ceiling/floor 50mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. (Item No. 42.60, First Floor)

... (Item No. 42.60, Second Floor)

... (Item No. 42.60, Third Floor)

... (Item No. 42.60, Fourth Floor)

Sewer trap

C.P.wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar make continental(Cat.No. CON-273UPR)

C.P.Towel rail 24" jaquar make continental(Cat. No. ACN 1111N)

Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. (Item No. 41.69)

C.P.Angular stop cock jaquar make continental(Cat.No. CON-053)

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. (Item No. 42.20)

Providing and laying in trenches 32mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (Item No. 42.64)

Providing and laying in trenches 40mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (Item No. 42.65, Fourth Floor)

Providing and fixing 75mm dia stabiliser pipe/P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete (Item No. 42.51)

Item Sr No. 3.26A of Water Supply and Sanitary System

Item Sr No. 3.26B of Water Supply and Sanitary System

Providing and fixing 75mm dia stabiliser pipe/P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete (Item No. 42.51, First Floor)

... (Item No. 42.51, Second Floor)

... (Item No. 42.51, Third Floor)

... (Item No. 42.51, Fourth Floor)

Providing and fixing 100mm dia stabiliser pipe/P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. (Item No. 42.52)

Item Sr No. 3.27A of Water Supply and Sanitary System

Item Sr No. 3.27B of Water Supply and Sanitary System

Providing and fixing 100mm dia stabiliser pipe/P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. (Item No. 42.52, First Floor)

... (Item No. 42.52, Second Floor)

... (Item No. 42.52, Third Floor)

... (Item No. 42.52, Fourth Floor)

C.P.2-way bib cock jaquar make continental(Cat.No. CON-041)

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall(1:5:1 0) cement concrete bedding 15mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. (Item No. 42.33)

Providing and fixing 8cm rigid PVC Nahani trap including PVC grating, bend, connecting piece of UPVC pipe up to the outside face of wall, making the good damaged surface and testing etc. complete(Prior approval of sample and brand by Ex. Engr. is necessary before use) (Item No. 43.17)

Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall, 100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. (Item No. 42.86)

C.P.Handshower(health faucet) 1m.PVC tube with wall hook jaquar make(Cat. No. ALD 563)

Providing and fixing in position UPVC ultra violet stabilized 110mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete (Item No. 43.25)

C.P.Bib cock(ISI) jaquar make continental(Cat.No. CON-037)

C.P.sink cock with swinging casted spout jaquar make continental(Cat.No. CON-347)

Stainless Steel sink of size 610 x 460 x 200mm of nirali or equivalent make

Providing and fixing white glazed urinal of size 710x460x300mm with sensotronic concealed type flushing valve for urinal with complete kit having fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32mm diameter P.V.C. flush pipe with fitting and flushing arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc complete. (Item No. 48.43)

RWH-Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings(annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth(from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate(natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate(natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge (Item No. 48.46)

Supplying & erecting cast iron double flange butterfly valve of size 50 mm dia. complete as per specification no. FFVL/BFV

Public Seating Chair.-3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. (Item No. 51.44)

Item Sr No. 4.1A of Furniture

Item Sr No. 4.1B of Furniture

Public Seating Chair.-3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. (Item No. 51.44, First Floor)

... (Item No. 51.44, Second Floor)

... (Item No. 51.44, Third Floor)

Free Standing Table @ 1500Lx600Dx750HT Providing and fixing Table of Size 1500 x 600 x 750mm. Top: made from 25mm Prelaminated Particle board. All edges are covered by 2mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY(WITHOUT MOUSE TRAY) :-Metal Powder Coated-Black Color, CPU TROLLEY :-Metal Powder Coated-Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht.mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18mm prelaminated particle board, (Item No. 51.26)

Item Sr No. 4.2A of Furniture

Item Sr No. 4.2B of Furniture

Free Standing Table @ 1500Lx600Dx750HT Providing and fixing Table of Size 1500 x 600 x 750mm. Top: made from 25mm Prelaminated Particle board. All edges are covered by 2mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY(WITHOUT MOUSE TRAY) :-Metal Powder Coated-Black Color, CPU TROLLEY :-Metal Powder Coated-Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht.mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18mm prelaminated particle board, (Item No. 51.26, First Floor)

... (Item No. 51.26, Second Floor)

... (Item No. 51.26, Third Floor)

Full Height Steel Storage @ 750Lx450Dx2100HT Providing and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8mm thick & Top in 2mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. (Item No. 51.37)

Item Sr No. 4.3A of Furniture

Item Sr No. 4.3B of Furniture

Full Height Steel Storage @ 750Lx450Dx2100HT Providing and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8mm thick & Top in 2mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. (Item No. 51.37, First Floor)

... (Item No. 51.37, Second Floor)

... (Item No. 51.37, Third Floor)

Medium Height Steel Storage @ 750Lx450Dx1200HT Providing and fixing Openable Steel Storage of 750 x 450 x 1200Ht, with 2 adjustable shelves, Complete body & shutter made in 0.8mm thick & Top in 2mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25mm. thk. as per drawing. (Item No. 51.36)

Item Sr No. 4.4A of Furniture

Item Sr No. 4.4B of Furniture

Medium Height Steel Storage @ 750Lx450Dx1200HT Providing and fixing Openable Steel Storage of 750 x 450 x 1200Ht, with 2 adjustable shelves, Complete body & shutter made in 0.8mm thick & Top in 2mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25mm. thk. as per drawing. (Item No. 51.36, First Floor)

... (Item No. 51.36, Second Floor)

... (Item No. 51.36, Third Floor)

Multiple Compartment Lockers @ 1140Lx 457D x 1830mm. Ht. Providing and fixing Multiple Compartment Lockers @ 1140Lx 457D x 1830mm. Ht. with 12 Compartments, Complete body & shutter made of CRCA Sheet with powder coated finish as per approved color. (Item No. 51.38)

Item Sr No. 4.5A of Furniture

Item Sr No. 4.5B of Furniture

Multiple Compartment Lockers @ 1140Lx 457D x 1830mm. Ht. Providing and fixing Multiple Compartment Lockers @ 1140Lx 457D x 1830mm. Ht. with 12 Compartments, Complete body & shutter made of CRCA Sheet with powder coated finish as per approved color. (Item No. 51.38, First Floor)

... (Item No. 51.38, Second Floor)

... (Item No. 51.38, Third Floor)

Sofa Set 3+1+1 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5(cms) Breadth(cms): 100(cms)Height(cms): 100(cms) Weight(Kilograms): 66(Kilogram) Seating Capacity: Five Seat (Item No. 51.53)

... (Item No. 51.53, Third Floor)

Stool for Lab and Class-IV Providing and fixing 4 legged Lab stool, Legs made of 16 Guage 45MM Outer dimension MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge. (Item No. 51.51)

Item Sr No. 4.7A of Furniture

Item Sr No. 4.7B of Furniture

Stool for Lab and Class-IV Providing and fixing 4 legged Lab stool, Legs made of 16 Guage 45MM Outer dimension MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge. (Item No. 51.51, First Floor)

... (Item No. 51.51, Second Floor)

... (Item No. 51.51, Third Floor)

Providing & Arrangemnt of Mid Back, ECO CTS Mechanism, Fixed Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery (Item No. 51.43)

Item Sr No. 4.8A of Furniture

Item Sr No. 4.8B of Furniture

Providing & Arrangemnt of Mid Back, ECO CTS Mechanism, Fixed Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery (Item No. 51.43, First Floor)

... (Item No. 51.43, Second Floor)

... (Item No. 51.43, Third Floor)

Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery (Item No. 51.40)

... (Item No. 51.40, Third Floor)

Conference Table @ 3600Lx1400Dx750HT Providing & Fixing of Main Table @ 3600Lx1400Dx750HT-made up of 18+18mm Thick MDF top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4mm thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in PVC Membrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring., MODESTY PANEL:-to be made of 18mm thick Prelaminated particle board with PVC edge band Access Flap:-For Wire manager 2 Nos. (Item No. 51.31, Third Floor)

Executive's Table @ 1800Lx900Dx750HT Providing & Fixing of Table @ 1800Lx900Dx750HT-TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18mm thick Prelaminated particle board with PVC edge band as per drawing (Item No. 51.21)

... (Item No. 51.21, Third Floor)

Design, supply, fabrication and fixing acrylic multilingual Braille(raised dots) signboards of size 6"x 9" for room titles, designed as per the drawings issued and having 4mm thick blue acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate. Grade 2/Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate.Each signboard to be fixed as per manufacturers specifications on the wall adjoining the respective room door at a height of 1200mm from FFL and as per the directions by the engineer in charge. (Item No. 51.87)

Item Sr No. 4.12A of Furniture

Item Sr No. 4.12B of Furniture

Design, supply, fabrication and fixing acrylic multilingual Braille(raised dots) signboards of size 6"x 9" for room titles, designed as per the drawings issued and having 4mm thick blue acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate. Grade 2/Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate.Each signboard to be fixed as per manufacturers specifications on the wall adjoining the respective room door at a height of 1200mm from FFL and as per the directions by the engineer in charge. (Item No. 51.87, First Floor)

... (Item No. 51.87, Second Floor)

... (Item No. 51.87, Third Floor)

Floor Directories Providing and fixing acrylic multilingual Braille(raised dots)ADA compliant modular floor directories system on all floors of size1.5' x 2', showing the floor plan and the list of rooms on that floor, to be installed on each floor near the staircase, designed as per standards and having 4mm thick blue acrylic base plate with Upper Case San Serif words and symbols made of white acrylic non glare cut out letters of height 20mm raised not less than 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare imported acrylic letters of height 15mm raised not less than 0.8mm above base plate. Grade 2/Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate. Each directory to be fixed as per manufacturers specifications on the wall at the approved location at a height of 1200mm from FFL and as per the directions by the engineer in charge. (Item No. 51.68)

Item Sr No. 4.13A of Furniture

Item Sr No. 4.13B of Furniture

Floor Directories Providing and fixing acrylic multilingual Braille(raised dots)ADA compliant modular floor directories system on all floors of size1.5' x 2', showing the floor plan and the list of rooms on that floor, to be installed on each floor near the staircase, designed as per standards and having 4mm thick blue acrylic base plate with Upper Case San Serif words and symbols made of white acrylic non glare cut out letters of height 20mm raised not less than 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare imported acrylic letters of height 15mm raised not less than 0.8mm above base plate. Grade 2/Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate. Each directory to be fixed as per manufacturers specifications on the wall at the approved location at a height of 1200mm from FFL and as per the directions by the engineer in charge. (Item No. 51.68, First Floor)

... (Item No. 51.68, Second Floor)

... (Item No. 51.68, Third Floor)

ADA compliant modular Multilingual and tactile Emergency evacuation map of each floor indicating the current position of the viewer saying "YOU ARE HERE" of 15mm height letters in red with white bacKilogramround, indicating the emergency exits, locations of fire extinguishers etc. Signs shall have a solid header with the text "EVACUATION PLAN" in contrasting uppercase letters no less than 3/4" in height. The size of the board shall be 2ft x 2ft and shall be installed at a height of 1200mm from FFL and shall be oriented to the position of the viewer as per the direction of the site engineer (Item No. 51.74)

Item Sr No. 4.14A of Furniture

Item Sr No. 4.14B of Furniture

ADA compliant modular Multilingual and tactile Emergency evacuation map of each floor indicating the current position of the viewer saying "YOU ARE HERE" of 15mm height letters in red with white bacKilogramround, indicating the emergency exits, locations of fire extinguishers etc. Signs shall have a solid header with the text "EVACUATION PLAN" in contrasting uppercase letters no less than 3/4" in height. The size of the board shall be 2ft x 2ft and shall be installed at a height of 1200mm from FFL and shall be oriented to the position of the viewer as per the direction of the site engineer (Item No. 51.74, First Floor)

... (Item No. 51.74, Second Floor)

... (Item No. 51.74, Third Floor)

Fire exit and floor identification signage as per manufacturer's specifications, ADA compliant and modular system (Item No. 51.75)

Item Sr No. 4.15A of Furniture

Item Sr No. 4.15B of Furniture

Fire exit and floor identification signage as per manufacturer's specifications, ADA compliant and modular system (Item No. 51.75, First Floor)

... (Item No. 51.75, Second Floor)

... (Item No. 51.75, Third Floor)

Acrylic tactile audio map Design, supply, fabrication and fixing of acrylic, non glare, tactile audio pictorial building layout as per the approved size, design and make, having 6mm thick acrylic non glare base plate of the approved colour and non glare acrylic cut out symbols and upper case Sans Serif letters of 12mm height, raised 3mm above base plate and Grade 2/Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate. The map to be installed at the specified location as per accessibility standards, shall be oriented to the position of the viewer and to be installed at a height of 800mm from the finished ground/floor level and using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge (Item No. 51.66)

Item Sr No. 4.16A of Furniture

Item Sr No. 4.16B of Furniture

Acrylic tactile audio map Design, supply, fabrication and fixing of acrylic, non glare, tactile audio pictorial building layout as per the approved size, design and make, having 6mm thick acrylic non glare base plate of the approved colour and non glare acrylic cut out symbols and upper case Sans Serif letters of 12mm height, raised 3mm above base plate and Grade 2/Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate. The map to be installed at the specified location as per accessibility standards, shall be oriented to the position of the viewer and to be installed at a height of 800mm from the finished ground/floor level and using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge (Item No. 51.66, First Floor)

... (Item No. 51.66, Second Floor)

... (Item No. 51.66, Third Floor)

Providing and fixing SS Braille buttons in the elevator of the approved brand and make to be installed using the specified adhesive and as per the instructions given by the manufacturer (Item No. 51.80)

Item Sr No. 4.17A of Furniture

Item Sr No. 4.17B of Furniture

Providing and fixing SS Braille buttons in the elevator of the approved brand and make to be installed using the specified adhesive and as per the instructions given by the manufacturer (Item No. 51.80, First Floor)

... (Item No. 51.80, Second Floor)

... (Item No. 51.80, Third Floor)

Providing and fixing of high intensity reflective conspicuity tape 25 to 50mm width, on edges of treads in staircase including, cutting, pasting etc. of make 3M or equivalent brand as per the direction of engineer in charge (Item No. 51.81)

Item Sr No. 4.18A of Furniture

Item Sr No. 4.18B of Furniture

Providing and fixing of high intensity reflective conspicuity tape 25 to 50mm width, on edges of treads in staircase including, cutting, pasting etc. of make 3M or equivalent brand as per the direction of engineer in charge (Item No. 51.81, First Floor)

... (Item No. 51.81, Second Floor)

... (Item No. 51.81, Third Floor)

Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain(Ball) system with all necessary fixtures and fitting etc. complete.(Sample to be final by Engineer In-charge prior execution of work) (Item No. 51.19)

Item Sr No. 4.19B of Furniture

Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain(Ball) system with all necessary fixtures and fitting etc. complete.(Sample to be final by Engineer In-charge prior execution of work) (Item No. 51.19, First Floor)

... (Item No. 51.19, Second Floor)

... (Item No. 51.19, Third Floor)

... (Item No. 51.19, Fourth Floor)

Reception Table -Providing and fixing in position Reception Table of size 4.05 x 0.75x1.20m ht as per drawing,Table by using 19mm &19mm ply patti for 38mm thk top with 16 mm polished granite counter and 19 mm thick plywood for all other horizontal and vertical members, front box, top box (as per drawing) Telescopic channel CPU Stand/ ready made Keyboard tray with mouse pad shall be provided of approved model and make. Footrest made in 18mm ply as per dwg. Table is having Storage of 0.45 x0.63 x0.45 3 no with 1 drawer & 1 shutter as per drawing shall be provided . Drawer Fascia to be made in 19mm ply with 1mm thk aminate from outside 0.8 mm thk laminate from inside and sides & back of drawer is to be made in 12mm ply & bottom in 6mm ply finished with 0.8mm thk laminate laminate from bothside . Shutter in 19 mm ply inished by 1 mm thk laminate fixed by 2 no of W-hinges, 2 no of 4 handles (Stainless Steel finish) and telescopic channels(18/16) as per approval & drawing . All exposed plywood surfaces are to be finished with 1 mm thick laminate(range @ Rs.615/ sqm.) & all internal exposed surfaces in 0.8 mm thk laminate (range @ Rs.260/ sqm.)( ) of approved make & shade and all exposed edges of plywood to have 25mm x6mm , 0mm x 6 mm thk for top edge BTC lipping. All internal exposed wooden sections to be MELAMINE POLISH in matching colour of laminate. Rate inclusive anti termite treatment to the wooden &plywood material. tem to include all necessary hardware and fittings in Stainless Steel matt finish, handle , locks& shutter lock including magnetic ball catcher,tower bolts, chain(1 no for each shutter)(1 no for each shutter),hinges,3 .s matt wire manager , fevicol, screws etc.,as per instruction of site engineer in -charge , complete in all respects. Note: This item includes table (4.05 x 0.75 x1.20m ht 1 no with storage 0.45x0.60x0.75m ht),( foot est-0.6 x 0.3 x 0.1m ht x 1no)Spec. No.: As directed by Engineer in charge.

Item Sr No. 4.20A of Furniture

Item Sr No. 4.20B of Furniture

NURSE STATION WITH SIDE UNIT-Providing and fixing in position Table of size 2.50 x 0.60x1.20m ht as per drawing,Table by using 19mm &19mm ply patti for 38mm thk top with 16 mm polished granite counter and 19 mm thick plywood for all other horizontal and vertical members, front box, top box (as per drawing) Telescopic channel CPU Stand/ ready made Keyboard tray with mouse pad shall be provided ofapproved model and make. Footrest made in 18mm ply as per dwg. Table is having Storage of 0.45 x 0.60 x 0.45 ht 2 no with 1 drawer & 1 shutter as per drawing shall be provided &.Side unit of 1.45 x 0.60 x0.75 m ht with 2 drawer & 2 shutter as per drawing shall be provided. Drawer Fascia to be made in 19mm ply with 1mm thk laminate from outside 0.8 mm thk laminate from inside and sides & back of drawer is to be made in 12mm ply & bottom in 6mm ply finished with 0.8mm thk laminate laminate from bothside . Shutter in 19 mm ply finished by 1 mm thk laminate fixed by 2 no of W-hinges, 2 no of 4 handles (Stainless Steel finish) and telescopic channels(18/16) as per approval & drawing .All exposed plywood surfaces are to be finished with 1 mm thick laminate(range @ Rs.615/ sqm.) & all internal exposed surfaces in 0.8 mm thk laminate (range @Rs.260/ sqm.)( ) of approved make & shade and all exposed edges of plywood to have 25mm x6mm , 50mm x 6 mm thk for top edge BTC lipping. All internal exposed wooden sections to be MELAMINE POLISH in matching colour of laminate. Rate inclusive anti termite treatment to the wooden &plywood material. Item to include all necessary hardware and fittings in Stainless Steel matt finish, handle , locks& shutter lock including magnetic ball catcher,tower bolts, chain(1 no for each shutter)(1 no for each shutter),hinges,3 s.s matt wire manager, , fevicol, screws etc.,as per instruction of site engineer in -charge , complete in all respects. Note: This item includes table (2.50 x 0.60 x1.20 1 no with storage 0.45x0.60 x0.45m ht) , Side unit (1.45 x 0.60 x 1.20m ht x 1 no),( foot rest-0.6 x 0.3 x 0.1 m ht x 2 no) Spec. No.: As directed by Engineer in charge.

Item Sr No. 4.20C of Furniture

Item Sr No. 4.20D of Furniture

NURSE STATION WITH SIDE UNIT-Providing and fixing in position Table of size 2.50 x 0.60x1.20m ht as per drawing,Table by using 19mm &19mm ply patti for 38mm thk top with 16 mm polished granite counter and 19 mm thick plywood for all other horizontal and vertical members, front box, top box (as per drawing) Telescopic channel CPU Stand/ ready made Keyboard tray with mouse pad shall be provided ofapproved model and make. Footrest made in 18mm ply as per dwg. Table is having Storage of 0.45 x 0.60 x 0.45 ht 2 no with 1 drawer & 1 shutter as per drawing shall be provided &.Side unit of 1.45 x 0.60 x0.75 m ht with 2 drawer & 2 shutter as per drawing shall be provided. Drawer Fascia to be made in 19mm ply with 1mm thk laminate from outside 0.8 mm thk laminate from inside and sides & back of drawer is to be made in 12mm ply & bottom in 6mm ply finished with 0.8mm thk laminate laminate from bothside . Shutter in 19 mm ply finished by 1 mm thk laminate fixed by 2 no of W-hinges, 2 no of 4 handles (Stainless Steel finish) and telescopic channels(18/16) as per approval & drawing .All exposed plywood surfaces are to be finished with 1 mm thick laminate(range @ Rs.615/ sqm.) & all internal exposed surfaces in 0.8 mm thk laminate (range @Rs.260/ sqm.)( ) of approved make & shade and all exposed edges of plywood to have 25mm x6mm , 50mm x 6 mm thk for top edge BTC lipping. All internal exposed wooden sections to be MELAMINE POLISH in matching colour of laminate. Rate inclusive anti termite treatment to the wooden &plywood material. Item to include all necessary hardware and fittings in Stainless Steel matt finish, handle , locks& shutter lock including magnetic ball catcher,tower bolts, chain(1 no for each shutter)(1 no for each shutter),hinges,3 s.s matt wire manager, , fevicol, screws etc.,as per instruction of site engineer in -charge , complete in all respects. Note: This item includes table (2.50 x 0.60 x1.20 1 no with storage 0.45x0.60 x0.45m ht) , Side unit (1.45 x 0.60 x 1.20m ht x 1 no),( foot rest-0.6 x 0.3 x 0.1 m ht x 2 no) Spec. No.: As directed by Engineer in charge. (First Floor)

... (Second Floor)

... (Third Floor)

NURSE STATION WITHOUT SIDE UNIT-Providing and fixing in position Table of size 2.41 x 0.60x1.20m ht as per drawing,Table by using 19mm &19mm ply patti for 38mm thk top with 16 mm polished granite counter and 19 mm thick plywood for all other horizontal and vertical members, front box, top box (as per drawing) Telescopic channel CPU Stand/ ready made Keyboard tray with mouse pad shall be provided ofapproved model and make. Footrest made in 18mm ply as per dwg. Table is having Storage of 0.45 x 0.60 x 0.45 ht 2 no with 1 drawer & 1 shutter as per drawing shall be provided Drawer Fascia to be made in 19mm ply with 1mm thk laminate from outside 0.8 mm thk laminate from inside and sides & back of drawer is to be made in 12mm ply & bottom in 6mm ply finished with 0.8mm thk laminate laminate from bothside . Shutter in 19 mm ply finished by 1 mm thk laminate fixed by 2 no of W-hinges, 2 no of 4 handles (Stainless Steel finish) and telescopic channels(18/16) as per approval & drawing .All exposed plywood surfaces are to be finished with 1 mm thick laminate(range @ Rs.615/ sqm.) & all internal exposed surfaces in 0.8 mm thk laminate (range @Rs.260/ sqm.)( ) of approved make & shade and all exposed edges of plywood to have 25mm x6mm , 50mm x 6 mm thk for top edge BTC lipping. All internal exposed wooden sections to be MELAMINE POLISH in matching colour of laminate. Rate inclusive anti termite treatment to the wooden &plywood material. Item to include all necessary hardware and fittings in Stainless Steel matt finish, handle , locks& shutter lock including magnetic ball catcher,tower bolts, chain(1 no for each shutter)(1 no for each shutter),hinges,3 s.s matt wire manager, , fevicol, screws etc.,as per instruction of site engineer in -charge , complete in all respects. Note: This item includes table (2.41 x 0.60 x1.20 1 no with storage 0.45x0.60 x0.45m ht) ,( foot rest-0.6 x 0.3 x 0.1 m ht x 2 no) Spec. No.: As directed by Engineer in charge.

Item Sr No. 4.20H of Furniture

Item Sr No. 4.20I of Furniture

NURSE STATION WITHOUT SIDE UNIT-Providing and fixing in position Table of size 2.41 x 0.60x1.20m ht as per drawing,Table by using 19mm &19mm ply patti for 38mm thk top with 16 mm polished granite counter and 19 mm thick plywood for all other horizontal and vertical members, front box, top box (as per drawing) Telescopic channel CPU Stand/ ready made Keyboard tray with mouse pad shall be provided ofapproved model and make. Footrest made in 18mm ply as per dwg. Table is having Storage of 0.45 x 0.60 x 0.45 ht 2 no with 1 drawer & 1 shutter as per drawing shall be provided Drawer Fascia to be made in 19mm ply with 1mm thk laminate from outside 0.8 mm thk laminate from inside and sides & back of drawer is to be made in 12mm ply & bottom in 6mm ply finished with 0.8mm thk laminate laminate from bothside . Shutter in 19 mm ply finished by 1 mm thk laminate fixed by 2 no of W-hinges, 2 no of 4 handles (Stainless Steel finish) and telescopic channels(18/16) as per approval & drawing .All exposed plywood surfaces are to be finished with 1 mm thick laminate(range @ Rs.615/ sqm.) & all internal exposed surfaces in 0.8 mm thk laminate (range @Rs.260/ sqm.)( ) of approved make & shade and all exposed edges of plywood to have 25mm x6mm , 50mm x 6 mm thk for top edge BTC lipping. All internal exposed wooden sections to be MELAMINE POLISH in matching colour of laminate. Rate inclusive anti termite treatment to the wooden &plywood material. Item to include all necessary hardware and fittings in Stainless Steel matt finish, handle , locks& shutter lock including magnetic ball catcher,tower bolts, chain(1 no for each shutter)(1 no for each shutter),hinges,3 s.s matt wire manager, , fevicol, screws etc.,as per instruction of site engineer in -charge , complete in all respects. Note: This item includes table (2.41 x 0.60 x1.20 1 no with storage 0.45x0.60 x0.45m ht) ,( foot rest-0.6 x 0.3 x 0.1 m ht x 2 no) Spec. No.: As directed by Engineer in charge. (First Floor)

... (Second Floor)

... (Third Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/granite/quartzite/gneiss metal for foundation and bedding/steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.(Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 24.04)

Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Item No. 26.33)

Providing & Fixing in position, Fabric wrapped Compressed polyester fibre nonwoven 9mm panels above the wood wool board panelling or existing sal wood frame, using adhesive, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour, finishing etc complete (Item No. 51.11)

Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete.(using 100% crushed sand) (Item No. 33.53)

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading-I Material (Item No. 3.01)

Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate(natural sand/VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25mm, , cement content not to be less than 150kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor/by suitable means as approved by Engineer-in-charge, compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. (Item No. 5.13)

Providing and casting in situ or precast tapering R.C.C. M-20 Semi Barrier type Kerb without gutter(as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant (Item No. 7.02)

Supplying and Fixing of Molded Shank Raised Pavement Markers/Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50mm, 100mm and 102 +/-2mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/-5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/-2mm and height not less than 30+/-2mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. (Item No. 6.09)

Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/colour of 2.5mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/lux and Qd of 100 mcd/sqm/lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015). (Item No. 6.12a)

Cutting transverse contraction joints 3 to 4mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay/slab etc. complete including subsequent widening of the groove 8 to 10mm. wide at top having depth of 15mm. as directed by Engineer incharge. (Item No. 5.17)

Providing and fixing in position TMT FE 500, 32mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60cms. Long and at 30.00cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete. (Item No. 5.14)

Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete.(By Mechanical Means) a) Upto 1.50m lift Normal Rate b) 1.50m to 3.00m lift, Add 10% c) 3.00m to 4.50m lift, Add 20% d) 4.50m to 6.0m lift, Add 30% (Item No. 12.03)

Providing cast in situ/ready mix M20 grade cement concrete for head walls of CD work/retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete.(with reversible drum type mixer/concrete batch mix plant(pan mixer) with SCADA (Item No. 11.29)

Providing and laying filter material underneath pitching in slopes as per drawings and technical specifications etc. complete. (Item No. 14.74)

Preparing Lawn:- Excavating the ground to a required depth of 30 cms., removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manuar in excavated area in 2:1 proportion to a height of 30 cms. Mixing garden soil and manure throughly, well levelling, watering on previous night, planting required variety of lawn grass as directed and maintaining till well established by watering, wedding, clipping, rolling etc. complete.

Planting large flowering/Shady trees :(Minimum height to 2 mtrs) Digging pit with size 0.9mx0.9mx0.9m, removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.30 m. and remaining height f 0.60 m. with fresh garden soil and manure thoroughly (well levelling as directed, watering previous night, Planting one or two year old healthy trees sapling as per specifications.Maintaining till well established by watering, weeding, stirring of soil replacing of casualty's etc, complete.

Planting small and medium size ornamental/Flowering Plant : Digging pit with size 0.6mx0.6mx0.6m, removing and conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil & Farm yard Manure upto a height of 0.60m in 3:1 proportion. Mixing soil and Manure thoroughly well, levelling watering on previous night Planting one or two year old healthy plant saplings as per specification. Maintaining till well established by watering, strring, of soil and manure, replacing casualties, etc, complete.

Planting clipped Hedge: Excavating the ground to a required depth of 30 cms. Removing and conveying unwanted stuff to arrquired distance as directed. Filling fresh garden soil and manure in excavated area in 3:1 proportion to a height of 30 cms. Mixing garden soil and manure thoroughly,well,levelling,watering on previous night.Planting hedge plants of required species in two rows. Distance between two rows and between two plants will be 25 cms. Maintaining tillwell established by watering,weeding,stirring the soil and clipping if necessary etc.complete

Peparing Shrubbery: -Excavating the ground to a required depth of 30 cms . Removing rubbish and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil and manure in excavated area in 3:1 proportion to a height of 30 cms. Mixing garden soil and manure thoroughly well,levelling,watering on previous night. Planting well,levelling,watering on previous night. Planting well developed shrubs plants, 0.5 mtrs height,0.45 mtrs , apart as directed and maintaining till well established by watering.weedings,strirring replacing,replacing casualties etc complete.

Preparing Edging or Border:- Excavating the ground to the required depth of 20 cms.,in the removing & conveying unwanted stuff to the required distance as directed. Filling the excavated part with fresh soil & manuar in excavated area in 3:1 proportion to a height of 20 cms. Mixing , levelling, watering the same planting unrooted cuttings at distance of 15 cms a part watering and maintaining till well grown the stage of prunning.

Providing and fixing 20 to 25mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/-with ponding test etc complete.(excluding Cement concrete 1:3:6 base concrete) (Item No. 31.13)

Providing and fixing 20 to 25mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete(RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35mm depth, filling the joints with 6mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/-with ponding test etc complete.(excluding Cement concrete 1:3:6 base concrete) (Item No. 31.12)

Providing Internal Electrification System & LV System for proposed 200 bedded Super Speciality Hospital at Kemburli Mahad , Dist : Raigad. Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC [1-1-10]

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No WG-MA/CC [1-1-11]

Supplying and erecting PVC box trunking of size 50x16/20 mm. with accessories on wall/ceiling as per specification No WG-MA/BOX [1-2-10]

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No WG-MA/BW [1-3-1]

Supplying and erecting green colour earthing with 1x 1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No WG-MA/BW [1-3-1]

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No WG-MA/BW [1-3-2]

Supplying and erecting green colour earthing with 1x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No WG-MA/BW [1-3-2]

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No WG-MA/BW [1-3-3]

Supplying and erecting green colour earthing with 1x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No WG-MA/BW [1-3-3]

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. [1-6-1]

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. [1-6-2]

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter duly erected on provided plate and box with wiring connections complete. [1-6-10]

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter duly erected on provided plate and box with wiring connections complete. [1-6-11]

Supplying and erecting modular type bell indicator duly erected on provided plate and box with wiring connections complete. [1-6-18]

Supplying and erecting modular type buzzer 220 / 250V duly erected on provided plate and box with wiring connections complete. [1-6-19]

Supplying and erecting modular type (two module) electronic step regulator for fan duly erected on provided plate and box with wiring connections complete. [1-6-23]

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. [1-6-34]

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. [1-6-36]

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. [1-6-40]

Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires modular type switch earthing and required accessories as per specification No WG-PW/CW [1-7-5]

Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires modular type switch earthing and required accessories as per specification No WG-PW/CW [1-7-6]

Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires modular type switch earthing and required accessories as per specification No WG-PW/HW [1-7-15]

Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires modular type switch earthing and required accessories as per specification No WG-PW/HW [1-7-16]

Wiring for plug on board with Switch socket surface/concealed type copper wiring and earthing and with modular accessories as per specification No WG-PW/CW [1-7-26]

Supplying and erecting LED square / circular Max. 7W down lighter/ Panel Light having pressure die-cast aluminium housing polystyrene diffuser having system lumens output of Min. 770 Lumens min. efficacy of 110 lumen/W CRI>80 CCT upto 6500K Beam Angle of 120 deg. max. ripple of 5% THD<10% p.f. >0.95 operating range of 120-270V surge protection of 2.5 kV Life class of 50 000 Hrs. at L70B50 including driver having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. [2-1-2]

Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing polystyrene diffuser having system lumens output of Min. 1500 Lumens min. efficacy of 110 lumen/W CRI>80 CCT upto 6500K Beam Angle of 120 deg. max. ripple of 5% THD<10% p.f. >0.95 operating range of 120-270V surge protection of 2.5 kV Life class of 50 000 Hrs. at L70B50 including driver having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. [2-1-4]

Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing polystyrene diffuser having system lumens output of Min. 2000 Lumens min. efficacy of 110 lumen/W CRI>80 CCT upto 6500K Beam Angle of 120 deg. max. ripple of 5% THD<10% p.f. >0.95 operating range of 120-270V surge protection of 2.5 kV Life class of 50 000 Hrs. at L70B50 including driver having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. [2-1-5]

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 30 W having CRCA powder coated housing polystyrene diffuser having system lumens output of Min. 3600 Lumens min. efficacy of 120 lumen/W CRI>80 CCT upto 6500K Beam Angle of 120 deg. max. ripple of 5% THD<10% p.f. >0.95 operating range of 120-270V surge protection of 2.5 kV Life class of 50 000 Hrs. at L70B50 including driver having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. [2-1-7]

Making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the background to match the original surface upto 20W. [2-1-13]

Making suitable size of recess in any type of false ceiling for erection of flush type LED panel light 600mm x 600mm/1200x300mm and finishing the background to match the original ceiling surface. [2-1-14]

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens min. efficacy of 100 lumen/W CRI>80 CCT upto 6000K Beam Angle of 110 deg. Ripple<5% THD<10% p.f. >0.95 operating range of 200-270V surge protection of 2 kV Life class of 50 000 Hrs. at L70B50 including driver with end caps on provided PVC Block / wooden board with 3 years warranty. [2-1-16]

Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens min. efficacy of 100 lumen/W CRI>80 CCT upto 6000K Beam Angle of 110 deg. Ripple<5% THD<10% p.f. >0.95 operating range of 200-270V surge protection of 2 kV Life class of 50 000 Hrs. at L70B50 including driver with end caps on provided PVC Block / wooden board with 3 years warranty. [2-1-18]

Supplying and erecting inverter LED batten 20W tube light fitting with polycarbonate housing heat sink integrated HF electronic driver Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt CRI>80 CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty. [2-1-22]

Supplying and erecting Concealed type foot/step light Max. 5W having IP67. IK10 rated Pressure die cast housing having system lumens output of Min. 500 Lumens min. efficacy of 100 lumen/W CRI>80 CCT upto 5000K Beam Angle of 110 deg. THD<10% SDCM<5 p.f. >0.95 operating range of 230-270V surge protection of 2.5 kV Life class of 25 000 Hrs. at L70B50 including driver by making necessary arrangement/recess in wall to make it flush with surface with 2 Year warranty. [2-4-23]

Supplying and erecting LED Strip light 5m Length Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m min. efficacy of 90 lumen/W CRI>80 CCT upto 5000K Beam Angle of 110 deg. THD<10% p.f. >0.95 operating range of 230-270V Life class of 30 000 Hrs. at L70B50 including driver with 1 year warranty. [2-1-10]

Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF [2-10-16]

Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. FG-FN/CF [2-10-2]

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 PF>0.9 THD<10% without IR remote control/compatible speed regulator Temperature Rise of Max. 40 deg. C having external mounted control PCB completely erected in position as per specification no. FG-FN/CF [2-10-22]

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab. [2-11-5]

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. [2-11-6]

Supplying, erecting, testing and commissioning of self contained water cooler 230/250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. AP-WCR/WC [3-3-10]

Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200) [3-5-1]

Supplying and erecting storage type water heater 25 litres capacity having standing loss <0.511kWh/24hour/45°C high impact resistance engineering plastic body with anti corrosive high grade steel inner tank heating element having hard water & corrosion protection with minimum 3 safety protections (i.e. thermostat & thermal function cut-out valve) with total pressure 8 bar withstanding capacity duly tested and marking sr. no. and date of erection complete. specification no. AP-WH/STWH [3-1-2]

Supplying, installing, testing and commissioning of 20kVA capacity online pure sine wave with backup time of 1 hrs. PWM & IGBT based UPS with 0.9 to unity output pf 3 phase input and 3 phase output complete with all protections as per specification no. AP-UPS [3-7-8]

Supplying, installing, testing and commissioning of 10kVA capacity online pure sine wave with backup time of 1 hrs. PWM & IGBT based UPS with 0.9 to unity output pf single phase input & 1 phase output complete with all protections as per specification no. AP-UPS [3-7-5]

Supplying, installing, testing and commissioning of 6kVA capacity online pure sine wave with backup time of one hrs. PWM & IGBT based UPS with 0.9 to unity output pf single phase input & 1 phase output complete with all protections as per specification no. AP-UPS [3-7-4]

Supplying, installing, testing and commissioning of 3kVA capacity online pure sine wave with backup time of one hrs. PWM & IGBT based UPS with 0.8 to unity output pf single phase input & 1 phase output complete with all protections as per specification no. AP-UPS [3-7-3]

Supplying and erecting 12V/100Ah SMF battery with battery terminal wire duly charged with 24 months warranty complete. [3-8-12]

Supplying and erecting 12 V/65Ah SMF battery with battery terminal wire duly charged complete with 24 months warranty complete [3-8-11]

Supplying and erecting 12V/42Ah SMF battery with battery terminal wire duly charged with 24 months warranty complete [3-8-10]

Supplying and erecting 12V/26Ah SMF battery with battery terminal wire duly charged with 24 months warranty complete [3-8-9]

Supplying, erecting and marking SPMCB 6A to 32A C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-2]

Supplying, erecting and marking SPMCB 6A to 32A B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-3]

Supplying, erecting and marking DPMCB 6 A to 32 A B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-7]

Supplying, erecting and marking TPMCB 6A to 32A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-10]

Supplying, erecting and marking TPMCB 40A to 63A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-11]

Supplying, erecting and marking FPMCB 40A to 63A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-13]

Supplying, erecting and marking FPMCB 6A to 32A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-12]

Supplying and erecting triple pole and neutral distribution board (TPNDB) SPMCB of 4 ways/phase (12 poles) with door 1.2mm thickness surface/flush mounted IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB [5-4-1]

Supplying and erecting triple pole and neutral distribution board (TPNDB) SPMCB of 8 ways / phase (24 poles) with door 1.2mm thickness surface/ flush mounted IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB [5-4-2]

Supplying and erecting triple pole and neutral distribution board (TPNDB) SP/TP MCBs total 4 ways /12 Poles with door 1.2mm thickness surface/flush mounted IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB [5-4-4]

Supplying and erecting single pole and neutral distribution board (SPNDB) with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs with door 1.2mm thickness surface / flush mounted IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB [5-4-8]

Supplying and erecting single pole and neutral distribution board (SPNDB) with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs with door 1.2mm thickness surface / flush mounted IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB [5-4-9]

Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. [5-4-13]

Supplying and erecting triple pole and neutral distribution board (TPNDB) 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles) with door 1.2mm thickness surface/flush mounted on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1 [5-4-16]

Supplying and erecting triple pole and neutral distribution board (TPNDB) 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles) with door 1.2mm thickness surface/flush mounted on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1 [5-4-17]

Providing and erecting 4 Pole MCCB 415 V 100A rated short-circuit breaking capacity 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides insulation withstand capacity 800V no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB [5-5-1]

Providing and erecting 4 Pole MCCB 415V 200A rated short-circuit breaking capacity 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides with insulation withstand capacity 800V no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB [5-5-2]

Providing and erecting 4 Pole MCCB 415V 250A rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides with insulation withstand capacity 800V no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB [5-5-3]

Providing and erecting 4 Pole MCCB 415V 400A rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides with insulation withstand capacity 800V no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB [5-5-4]

Providing and erecting 4 Pole MCCB 415V 630A rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides with insulation withstand capacity 800V no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB [5-5-5]

Supplying, Erecting and Commissioning of 2 pole RCCB 16/25A electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB [5-6-1]

Supplying, Erecting and Commissioning of 4 pole RCCB 16/25A electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB [5-6-4]

Supplying, Erecting and Commissioning of 4 pole RCCB 40A electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB [5-6-5]

Supplying, Erecting and Commissioning of 4 pole RCCB 63A electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB [5-6-6]

Supplying, fixing, and commissioning 2 pole RCBO 6/10/16/20/25A with overcurrent rated short-circuit breaking capacity (10 kA) and earth leakage protection with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO [5-6-9]

Supplying, fixing, and commissioning 4 pole RCBO 6/10/16/20/25A with overcurrent rated short-circuit breaking capacity (10 kA) and earth leakage protection with 30/100/300 mA sensitivity and short circuit and earth leakage trip indications per specification no SW-RCCB/RCBO [5-6-12]

Supplying, erecting and marking SPMCB 0.5A to 5A C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-1]

Supplying and erecting terminal spreaders suitable for 4 pole above 250A up to 400A MCCB (Set of 8) [5-11-8]

Supplying and erecting terminal spreaders suitable for 4 pole above 400A up to 630A MCCB (Set of 8) [5-11-9]

Supplying and erecting terminal spreaders suitable for 4 pole above 100A up to 250A MCCB (Set of 8) [5-11-7]

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB. [5-11-14]

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for above 250A up to 630A MCCB. [5-11-15]

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes panel boards etc. including cutting bending drilling welding riveting treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. [6-1-1]

Supplying and erecting iron work sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. [6-1-19]

Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB [6-2-11]

Supplying and erecting panel mounting type digital ammeter having three and half digit LED display external CT operated calibrated for suitable to operate on 500V 0 to 1000A having accuracy class of 0.5 AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. [6-3-7]

Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. [6-3-8]

Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. [6-5-2]

Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green 230 / 250V on provided box / panel with necessary material wiring & connections etc. [6-5-5]

Supplying and erecting LED type indicating pilot lamp with LED colour blue 230 / 250 V on provided box / panel with necessary material wiring & connections etc. [6-5-6]

Supplying and erecting 150 kVAr 440 V 3 phase 50 Hz. Contactor Logic & Intelligent Relay micro APFC passive filter panel consisting of suitable steps of APP/MPP type capacitor units with Detuned (harmonic filter) reactors of suitable rating APFC panel shall be compliance to IEC 61439 and power quality IEC 61921 standard as per specification no CP-ED/APFC [6-7-7]

Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 100 mm height comprising all required standard accessories. [7-11-1]

Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 100 mm height comprising all required standard accessories. [7-11-2]

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials testing & recording the results as per specification no. EA-EP [9-1-1]

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials testing & recording the results as per specification no. EA-EP [9-1-2]

Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EA-EP. [9-2-2]

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. [9-2-3]

Supplying and erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete. [9-3-1]

Supplying erecting & terminating XLPE HFFR armoured cable - 4 core 4 sq.mm copper conductor c ontinuous 5.48 sq.mm ( 12 SWG) GI earth wire complete erected with glands & lugs on wall / trusses/ pole or laid in provided trench/ pipe as per specifications no. CB-LT.CU NON CSR [1-1-23]

Supplying erecting & terminating XLPE HFFR armoured cable - 4 core 6 sq.mm copper conductor c ontinuous 5.48 sq.mm ( 12 SWG) GI earth wire complete erected with glands & lugs on wall / trusses/ pole or laid in provided trench/ pipe as per specifications no. CB-LT.CU ( Non CSR ) [1-1-24]

Supplying erecting & terminating XLPE HFFR armoured cable - 4 core 10 sq.mm copper conductor c ontinuous 5.48 sq.mm ( 12 SWG) GI earth wire complete erected with glands & lugs on wall / trusses/ pole or laid in provided trench/ pipe as per specifications no. CB-LT.CU (NON CSR) [1-1-25]

Supplying erecting & terminating XLPE HFFR armoured cable - 4 core 16 sq.mm copper conductor c ontinuous 5.48 sq.mm ( 12 SWG) GI earth wire complete erected with glands & lugs on wall / trusses/ pole or laid in provided trench/ pipe as per specifications no. CB-LT.CU ( Non CSR) [1-1-26]

Supplying, erecting & terminating Supplying erecting & terminating HFFR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (WITH NOTE OF RATE RISE BY 14% FOR HFFR) [7-1-17]

Supplying, erecting & terminating Supplying erecting & terminating HFFR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( WITH NOTE OF 14 % RATE RISE FOR HFFR ) [7-1-19]

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL [7-1-20]

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No WG-MA/CC [1-1-9]

Supplying and erecting modular type T.V. socket single outlet duly erected on provided plate and box with wiring connections complete. [1-6-14]

Supplying and erecting modular type telephone socket one gang with safety shutter duly erected on provided plate and box with wiring connections complete. [1-6-15]

Supplying and erecting modular type blanking plate one module duly erected on provided plate & box. [1-6-24]

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. [1-6-35]

Supplying and erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation polyester taped Nylon Rip Cord & grey colour sheathed with FR PVC conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW [1-8-1]

Supplying and erecting 10 pair 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier polythene sheathed G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW [1-8-13]

Supplying and erecting co-axial copper cable low voltage grade tri-shielded RG-11 as per specification No. WG-TW [1-8-18]

Supplying, Erecting and Commissioning of MDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW [1-9-1]

Supplying, Erecting and Commissioning of 10 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW [1-9-11]

Supplying, Erecting and Commissioning of 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TW [1-9-18]

Supplying, Erecting and Commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete. [1-9-26]

Supplying, Erecting and Commissioning of digital (hybrid) type EPABX of 6 x 16 extension complete. [1-9-25]

Supplying, Erecting and Commissioning of push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete. [1-9-29]

Supplying, Erecting and Commissioning of IP telephone instrument as per specification complete. [1-9-30]

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC [1-10-1]

Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC [1-10-7]

Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC [1-10-16]

Supplying, fixing, and configuring 24 ports with 4 (SFP+) port ethernet managed switch with web view/CLI 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WG-NWC/GBS [1-11-4]

Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC. [1-12-1]

Supplying and fixing tool-less shutter keystone jack (RJ-45) in provided patch panel complete as per specification no. WG-NAS/KJ [1-12-3]

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP [1-12-4]

Supplying, fixing, and configuring 8-ports managed gigabit Layer-2 switch 10/100/1000 base-T POE smart switch plus 2 SFP erected in provided rack complete. [1-11-2]

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK [1-12-18]

Supplying, fixing, and configuring broadband ADSL router with all accessories on provided rack as per specification No. WG-NWC/ADSL [1-11-17]

Supplying, installing, testing and commissioning of storage type Mild Steel mixing water tank of capacity 3000 ltrs. tested to a pressure of 8 kg/cm2 insulated with 50 mm thick rock wool with wire mesh around and cladded with 26 SWG aluminium of dish end type with working pressure of 6 kg/cm2 fabricated with 6 mm thick MS plate and dished ends with 8 mm thick plates complete with man hole cover inner side of the tank coated with FRP coating of 3 mm thickness withstand temperature of 90°C provided with collars of 2 BSP for provision to install 6 numbers of electrical heating coils if required with thermal sensors for automatic operation and integrated into the electrical circuits of the circulation pumps and the heat pump with safety valve drain inlet and outlet nozzle pressure gauge with all necessary accessories complete. [4-6-6]

Supplying, installing, testing and commissioning of storage type Mild Steel mixing water tank of capacity 5000 ltrs. tested to a pressure of 8 kg/cm2 insulated with 50 mm thick rock wool with wire mesh around and cladded with 26 SWG aluminium of dish end type with working pressure of 6 kg/cm2 fabricated with 6 mm thick plate and dished ends with 8 mm thick plates complete with man hole cover inner side of the tank coated with FRP coating of 3 mm thickness withstand temperature of 90°C provided with collars of 2 BSP for provision to install 6 numbers of electrical heating coils if required with thermal sensors for automatic operation and integrated into the electrical circuits of the circulation pumps and the heat pump with safety valve drain inlet and outlet nozzle pressure gauge with all necessary accessories complete. [4-6-7]

Supplying and erecting triple pole and neutral distribution board (TPNDB) SP/TP MCBs total 4 ways /12 Poles with door 1.2mm thickness surface/flush mounted IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB [5-4-4]

Supplying, erecting and marking TPMCB 6A to 32A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-10]

Supplying, Erecting and Commissioning of 4 pole RCCB 40A electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB [5-6-5]

Supplying, erecting and marking FPMCB 40A to 63A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-13]

Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. [5-4-13]

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 6 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU [7-2-32]

Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EA-EP. [9-2-2]

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials testing & recording the results as per specification no. EA-EP [9-1-2]

Supplying, installing, testing and commissioning of Monoblock Heat pump having dimension 995 x 785 x 1700 (mm) Input power 2.22 kW 400 V 3 Ph 50 Hz Output power 8 kW having hot water temperature range 35°C to 75°C and ambient temperature range for max. efficiency 7°C to 43°C with glass lining hot water tank of 455 ltr. and min. 220 Kg at rated pressure 10 bar with two emergency heating elements operated on three operational mode Efficiency mode Hybrid turbo mode and Standard mode with Adaptive Energy System (AES) LED display with necessary accessories complete with 5 years ON-SITE warranty. [4-6-3]

Supplying and erecting Pressure Booster Pump single phase 50C/s A.C. supply of 1.125 KW/1.5 H.P. With discharge of 480 to 31 LPM for 10 to 50 Mtr Head & 25 mm suction/ 25 mm delivery pipe for Domestic Pressure boosting applications. [12-6-3]

Supplying and erecting automatic control panel for 3 Phase 415 volt A.C Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP S.P.P. Combined ammeter/ voltmeter phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing phase reversal phase imbalance etc . [12-4-17]

Providing and fixing high-density polyethylene (HDPE) container one piece moulded triple layer water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet outlet overflow pipe inclusive of all tanks capacity up to 20000 litres. [4-8-7]

Supplying and erecting chromium plated heavy duty brass stop cock for inlet pipe of water heater (15mm. dia). [3-1-7]

Providing 630 Kva Transformer and 500 DG set , Street light system, Water pump system for Proposed 200 bedded Super Speciality Hospital at Kemburli Mahad , Dist : Raigad. Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with PVC accessories on wall /ceiling as per specification No WG-MA/CON. [1-2-4]

Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV [1-3-14]

Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing having system lumens output of Min. 4400 Lumens min. efficacy of 110 lumen/W CRI>70 CCT upto 6500K THD<10% p.f. >0.95 operating range of 140-270V inbuilt surge protection of 10 kV Life class of 50 000 Hrs. at L70B50 including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. [2-4-4]

Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser having system lumens output of Min. 800 Lumens min. efficacy of 100 lumen/W CRI>80 CCT upto 6500K THD<10% p.f. >0.90 operating range of 140-240V inbuilt surge protection of 2 kV Life class of 25 000 Hrs. at L50B50 including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2. [2-4-20]

Erection of departmentally supplied LED street light/ flood light fitting above 150 to 400W [2-4-26]

Supplying, erecting, testing and commissioning of 10kW 3 x 3.3 KW AC Electric Vehicle charger (suitable for 2/3/4 wheeler) having minimum IK08/IP 54 Protection suitable for three phase 415V AC 50Hz incoming and 3 nos. output as per IEC 60309 industrial sockets having capacity of output current of 16A 240V AC at each socket with 3.5 TFT touch screen for human interface & LED Light for status indication and metering for measurement of consumed energy having metering accuracy +/-1% one hour battery backup for communication emergency push stop button and having short circuit over & under voltage overload over temperature earth leakage protection and enclosure made of minimum 1.5mm duly RAL7035 Coated M.S Erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty confirming to IS 17017 Series as per specification. [4-7-1]

Supplying, erecting, testing and commissioning of 15 KW DC Electric Vehicle Charger (suitable for 4 wheeler)having minimum IK08 & IP54 protection suitable for three phase 415V AC 50Hz incoming supply and 1 no. output charger interface GB/T with 40-100VDC supply and 15 kW capacity interlocking arrangement with minimum 5 meter charging cable length 7 LCD touch screen for human interface & LED light for status indication metering for measurement of consumed energy having metering accuracy +/-1% One hour battery backup for communication emergency push stop button. User interface by mobile application/QR Code/RIFD Card/Password Login with payment options and having short circuit over & under voltage surge protection earth leakage protection and enclosure made of minimum 1.5mm duly RAL7035 coated M.S erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty confirming to IS 17017 Series as per specification [4-7-3]

Supplying and erecting triple pole mini feeder pillar with 500V 200A FPMCCB as incomer and 2 outgoing circuits with HRC fuse base and cartridge of 100A with aluminium bus bar erected in 14 SWG CRCA sheet box with supporting angles self locks gasket having IP54 IK10 protection and slanting top to be erected on provided foundation complete as per specification no. SW-SWR/MFP [5-2-1]

Supplying and erecting triple pole mini feeder pillar with 500V 300A FPMCCB as incomer and 3 outgoing circuits with HRC fuse base and cartridge of 100A with aluminium bus bar erected in 14 SWG CRCA sheet box with supporting angles self locks gasket having IP54 IK10 protection and slanting top to be erected on provided foundation as per specification no. SW-SWR/MFP [5-2-2]

Supplying, erecting and marking SPMCB 0.5A to 5A C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-1]

Supplying, erecting and marking DPMCB 6A to 32A C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-6]

Supplying, erecting and marking TPMCB 6A to 32A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-10]

Supplying, erecting and marking FPMCB 40A to 63A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-13]

Supplying, fixing, and commissioning MCB type change over switch 4 pole 25A with 3 positions (I-O-II) with centre off position as per specification no. SW-SWR / MCBCOS [5-3-24]

Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. [5-4-13]

Providing and erecting 4 Pole MCCB 415V 200A rated short-circuit breaking capacity 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides with insulation withstand capacity 800V no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB [5-5-2]

Providing and erecting 4 Pole MCCB 415V 250A rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides with insulation withstand capacity 800V no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB [5-5-3]

Providing and erecting 4 Pole MCCB 415V 400A rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides with insulation withstand capacity 800V no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB [5-5-4]

Supplying, installing, testing and commissioning of air circuit breaker manual fixed type non-drawout type 650V 1000A rated at 50º C without deration 12kV Impulse 4 Pole (100% Neutral Protection) 50 kA (Ics=Icu=Icw for 1s) with standard accessories with ready to close individual fault trip alarm and trip indication mechanical and electrical anti pumping soft/ hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection & with 4 C/O contacts for On-Off-Trip indication min. 5 event and trip history on breaker display on provided iron frame as per specification no. SW-SWR/ACB [5-8-3]

Supplying, installing, testing and commissioning of extendable/non-extendable outdoor type 22 kV 630A load break isolator switch compliant to IEC 62271 -100 200 and 102 on provided MS channels/trench/foundation as per specification no SW-HTS / LBS [5-9-4]

Supplying, installing, testing and commissioning of SF 6 Insulated 22kV 630A 16kA/3sec 2 way outdoor extensible motorised SCADA compatible RMU internal arc tested as per electric supply company specification consisting of 1 no. feeder with 1 LBS and 1 no. feeder with 1 VCB compliant to IEC 62271 -100 200 and 102 as per specification no. SW-HTS/RMU SCADA [5-9-24]

Supplying and erecting terminal spreaders suitable for 4 pole above 100A up to 250A MCCB (Set of 8) [5-11-7]

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes panel boards etc. including cutting bending drilling welding riveting treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. [6-1-1]

Supplying and erecting marine (Waterproof) plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws wall fasteners supports nut bolts etc. complete with compliance to IS 720 2010 [6-1-14]

Supplying and erecting iron work sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. [6-1-19]

Supplying and erecting iron work sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. [6-1-20]

Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB [6-2-11]

Supplying and erecting HT CT multifunction DLMS compliance of accuracy of class 0.5 3x63.5V 50 Hz with optical & RS 232 port backlit LCD measures kWh kVAh V I kW 6 months history of energy load survey & displays trivector energy load survey TOD tamper detection & logging power ON /OFF events instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box. [6-3-6]

Supplying, erecting, testing and commissioning of 22KV HT metering cubical (compact type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle painted with powder coating / epoxy paint of required shade copper bus bar size 25 x 6 mm heavy duty mechanical lock with counter meter for measuring no. of times the opening of meter door top side cover (CT PT cover) interlock with meter door epoxy casted 3 nos. CT having required ratio between 25/5A to 200/5A VA 10 or 15 Class 0.2S epoxy casted 3 nos. PT having ratio 22000/V3/110/V3 VA 50 Class 0.2 suitable for provided trivector meter and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation. [6-4-4]

Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. [6-5-2]

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 3 RUN) [7-1-24]

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL [7-1-27]

Supplying, erecting & terminating XLPE insulated galvanised steel formed wire armoured (strip) cable 22 kV(E) 3 x 240 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT [7-3-20]

Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification no. CB-JT/HT [7-5-14]

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification no. CB-JT/HT [7-5-17]

Supplying and erecting G.I. pipe ‘A’ class 75 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE [7-6-4]

Supplying and laying (including excavation) half round reinforced cement concrete pipe of IS 458 2003 NP-2 class of 250 mm internal diameter in proper line level and slope including providing and fixing collars in cement mortar 1 2 and curing etc. complete. [7-6-8]

Supplying and laying (including excavation) of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface to required depth complete. [7-6-9]

Supplying and laying (including excavation) of suitable width & depth up to 90 cm) 200 mm outside dia double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface to required depth complete. [7-6-16]

Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/m) with base plate in provided foundation as per specification no. OH-PL/RSJ [8-1-13]

Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron made from high tensile structure grade steel as per BSEN - 10025 S 355/E350 & 3mm thickness with base plate 25 mm thick x OD 520 mm grade as per IS-2062 pole made in single section & submerge arc welded with lowering & raising motorized unit wire rope stainless steel 316 grade 2 nos. 7x19 construction 5mm SG-DG U clamps double drum with assembly 250 kg 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box lightning arrestor arrangement for fixing aviation light high-mast with serial number factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete as per specification no. OH-PL/HM (excluding luminaries) [8-2-1]

Providing and erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL [8-2-12]

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT [8-2-21]

Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT [8-2-22]

Supplying and erecting MS pole bracket for guarding/LT OH line fabricated from ISM channel 75x40x6mm and 550mm long for necessary nos. of provided insulators and erecting on pole with 50x6mm clamp complete as per specification no. OH-PL/BKT [8-3-3]

Supplying and erecting 100 x 50 x 6 mm with 4.7 mm thick web and 7.5 mm thick flange channel iron cross arm of suitable length for 2.4 m wide DP structure and erecting on DP with 50x6mm clamp complete as per specification no. OH-PL/BKT [8-3-11]

Supplying and erecting ACSR conductor of size 6/1-2.59 mm complete. (Weasel) (127.7 kg/km) as per specification No. OH-CON/ACSR [8-4-7]

Supplying and erecting porcelain disc type insulator 70KN with necessary hardware suitable for 22kV line complete as per specification no. OH-INS/DI [8-5-7]

Supplying and erecting distribution class 22 kV thyrite type lightening arrester with nut bolts on provided MS channel as per specification no. OH-INS/LA [8-5-16]

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials testing & recording the results as per specification no. EA-EP (TRANSFORMER NEUTRAL-4 DG NEUTRAL-4 METRING KIOSK-3 FENSING-1 LA-1) [9-1-1]

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials testing & recording the results as per specification no. EA-EP ( TRANSFORMER BODY-4 DG BODY-4 RMU-4 PANEL-1) [9-1-2]

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP [9-1-4]

Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EA-EP. [9-2-2]

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. [9-2-3]

Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete. [9-2-5]

Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete. [9-2-5]

Supplying, installing, testing and commissioning of 3 phase 22/0.433 kV 50 Hz. 630 kVA Mineral oil immersed and naturally cooled outdoor type Copper wound Non-sealed transformer delta/star connected with additional neutral brought out on load side temperature rise should not exceed 40? by thermometer in oil and 45? by the resistance method in winding at full load rating using type A winding insulation (kraft paper) with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5% having 7 number of tap positions with standard accessories complete with test certificate with losses below 1953 Watts at 50% load 5565 Watts at 100% load as per IS 1180 (part 1) 2014 with necessary permissions of Electrical Inspector as per specification no SS- TR-NSL [10-1-21]

Supplying and erecting 22 kV outdoor type gang operated air break triple pole switch 200 A capacity with 3 post pin type insulator per phase mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of C class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp. [10-6-3]

Supplying and erecting 22 kV outdoor type drop out fuse with insulator complete with fuse holders fuse barrel with metal fitting fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm. [10-6-6]

Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FSG [10-6-18]

Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class GI pipe with angle iron supports chain link wire mesh (jali) complete supported on channel iron erected in foundation and painted complete as per specification no SS-AS/DLD [10-6-20]

Providing printed instruction chart for treating persons suffering from electric shock printed in English & Marathi and duly laminated complete. [10-6-22]

Supplying standard first aid box with necessary antiseptic cream medicine for use on wounds due burn crepe bandage gauge bandage medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use scissors anti-septic solution etc. (All above contents shall be of standard makes) [10-6-24]

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class C insulation conforming to IS 15652 – 2006 tested having 3mm thickness up to 33 kV [10-6-27]

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 500 kVA output continuous rating 3 Phase 415 V 50c/s 0.8 p. f. A.C supply a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours along with standard accessories self-excited self-regulated screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 % with performance class G2 and maximum fuel consumption 81.90 Ltr/hr 75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters switchgears indicators connected with suitable wires/cables the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet sound absorbing material to restrict sound level up to 75 dB at 1.0 m provided with first filling of oil diesel not less than 690 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG [11-1-21]

Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 400 kVA up to 500 kVA capacity Three phase 415 Volts 50Hz A.C. with all standard features safeties etc as per specification no. GEN-AMF. [11-2-18]

Supplying and erecting minimum Three & above star rated 3 phase 415 V 50 Hz submersible pump set of 7.5 KW/10HP suitable for erection on open well pump having delivery head from 72 to 28 m and discharge from 120 to 840 litres. per minute & pipe of Suction 65 mm/Delivery 50 mm diameter erected with necessary H type clamps as per specification No. WP-OSP [12-3-7]

Supplying and erecting flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. [12-4-8]

Supplying and erecting Water level controller 230/415 V A.C. Four way under ground & Over head tank operation only. [12-4-15]

Supplying and erecting PVC coated 5 mm dia. Brass sensor/ electrode duly wired with nuts & bolts complete (Set of 3 Nos) [12-4-16]

Supplying and erecting automatic control panel for 3 Ph 415 volt A.C. Submersible/centrifugal pump set up to 7.5 HP - 10 H.P. consisting of DOL starter having relay range 13-21 AMP S.P.P. Combined ammeter/voltmeter phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing phase reversal phase imbalance etc. [12-4-18]

Supplying, installing, testing and commissioning of FR XLPE armoured cable 4 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU [13-9-11]

Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete.(5.7*3.2*0.7) [16-1-5]

second class Burnt Brick masonry with conventional /I.S. type bricks in cement mortar 1 6 in foundation sand plinth of inner walls /in plinth external walls including bailing out water manually striking joints on unexposed faces raking out joints on exposed faces and watering etc. Complete. [16-2-1]

Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete. [16-2-3]

Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete of medium duty (100 Kilogram). [16-2-4]

Making transformer plinth (3.5 x 3.5 x3.5) m in size with necessary excavation in ground with 350 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12 mm thick including watering etc complete. {NOTE - The above rates are for 1.2 meter height plinth above ground level. If excess height is required to maintain ground clearance as per Central Electricity Authority (Measures Relating to Safety and Electric Supply) regulations 2010 regulations add Rs. 820/- for every 100 mm.] [16-3-1]

Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1 3 6 cement concrete 20 x 25 mm stone metal (45 x 45 x 45) cm /45 cm dia. x 45 cm height plinth duly plastered with necessary curing and finishing complete. (above 6 m to 9 m poles) [16-3-3]

Making cement concrete foundation in 1 2 4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).(5.7*3.2) [16-3-5]

Making cement concrete foundation in 1 3 6 cement concrete (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). (2.25*1.7) [16-3-7]

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel concrete excavation and fixing provided nut bolts with the help of template duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). [16-3-9]

Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template duly plastered as per design complete (for 12.5 m raising lowering high mast). [16-3-12]

Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete as per specification no. CW-PLB/GP. [16-5-6]

Supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete. [16-6-15]

Supplying and erecting non return valve 50 mm dia in position made of gun metal complete. [16-6-21]

Providing Fire Fighting System for proposed 200 bedded Super Speciality Hospital at Kemburli Mahad , Dist : Raigad. Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes panel boards etc. including cutting bending drilling welding riveting treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. [6-1-1]

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3 core 4 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU [ FOR JOCKEY PUMP] [7-2-15]

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 150 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU [ FOR MAIN FIRE PUMP] [7-2-26]

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½core 240 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU [ FOR FIRE PANEL] [7-2-28]

Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware. [7-11-8]

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials testing & recording the results as per specification no. EA-EP [ FOR FIRE PANEL-2 SPINKLER PUMP-2 HYDRANT PUMP-2] [9-1-1]

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. [9-2-3]

Supplying, installing, testing and commissioning of main fire pump(MFP / EP) suitable for water discharge of 2280 to 2850 LPM at 120 to 90 m head driven by electric motor 415 volts 3 phase 50 Hz AC supply of 75kW or of suitable kW capacity for manual/automatic operation and consisting of following (a) Horizontal type single stage centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade) mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor TEFC synchronous speed 3000 RPM suitable for operation with IP 55 protection for enclosure horizontal foot mounted type with Class-'F' insulation conforming to IS-325. (c) M.S. fabricated common base plate coupling coupling guard foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-MFP/SSC/EP [13-1-6]

Supplying, installing, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 110 to 90 m head driven by electric motor 415 volts 3 phase 50 Hz AC supply of 11 kW or of suitable kW capacity for manual/automatic operation and consisting of following (a) Horizontal/vertical type multi stage centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade) mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor TEFC synchronous speed 3000 RPM suitable for operation with IP 55 protection for enclosure horizontal foot mounted type with Class-'F' insulation conforming to IS-325. (c) M.S. fabricated common base plate coupling coupling guard foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-MFP/JP [13-2-3]

Supplying, installing, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 120 to 90 m head driven by 110 HP or suitable HP capacity diesel engine at required working speed suitable for automatic operation and consisting of following (a) Horizontal type single stage centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade) mechanical seal conforming to IS 1520. (b) Water cooled with radiator diesel engine conforming to relevant IS standard complete with auto starting mechanism 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v 50Hz AC supply diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding residential silencer instruments and protection as per standard specification stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate coupling coupling guard foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-MFP/SSC/DP [13-4-3]

Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification no. FF-PP [13-6-2]

Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification no. FF-PP [13-6-3]

Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings complete as per specification no. FF-PP [13-6-4]

Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP [13-6-5]

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP [13-6-6]

Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP [13-6-7]

Providing G.I. pipe ‘C’ class ERW 200 mm dia with necessary fittings complete as per specification no. FF-PP [13-6-8]

Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system. [13-6-10]

Supplying and erecting 200 mm dia Cast Iron end line strainer of Y-type flanged end pattern PN16 pressure rating screen of SS end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS [13-7-8]

Supplying and erecting 100 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating as per specification no. FF-VL/SV [13-7-14]

Supplying and erecting 150 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating as per specification no. FF-VL/SV [13-7-15]

Supplying and erecting 200 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating as per specification no. FF-VL/SV [13-7-16]

Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating as per specification no. FF-VL/BFV [13-7-17]

Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating as per specification no. FF-VL/BFV [13-7-18]

Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating as per specification no. FF-VL/BFV [13-7-19]

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating as per specification no. FF-VL/BFV [13-7-20]

Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating as per specification no. FF-VL/BFV [13-7-21]

Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating as per specification no. FF-VL/NRV [13-7-24]

Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating as per specification no. FF-VL/NRV [13-7-25]

Supplying and erecting 200 mm dia cast iron double flange NRV complete with PN16 pressure rating as per specification no. FF-VL/NRV [13-7-26]

Supplying and erecting stainless steel double outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV [13-7-37]

Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV [13-8-2]

Supplying and erecting 63mm dia reinforced rubber lined (R.R.L.) hose pipe 15m in length fitted with necessary accessories complete as per specification no. FF-FFA/RRL [13-8-4]

Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF-FFA/NZ [13-8-8]

Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC [13-8-10]

Supplying and erecting 300 mm dia 1.5m in height air vessel / tank fabricated from min 5mm thick M.S. sheet complete as per specification no. FF-FFA/ACT [13-8-12]

Supplying and erecting 20/25mm dia gun metal air release cock with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV [13-8-13]

Supplying and erecting 100 mm dia. pressure gauge 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve erected with provided G.I. pipe elbow etc. complete as per specification no. FF-FFA/PG [13-8-14]

Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve G.I. nipple elbow etc complete as per specification no. FF-FFA/PS [13-8-15]

Supplying and erecting brass orifice plate having 6 mm. thickness 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP [13-8-16]

Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8 x 6 ) and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) [13-8-19]

Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve hose pipe hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8 x6 ) and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) [13-8-20]

Supplying, installing, testing and commissioning of remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI [13-9-9]

Supplying, installing, testing and commissioning of FR XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU [13-9-10]

Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel central processing unit with the 4 loop capacity and capable of supporting upto 250 devices and detectors per loop with on-board LCD display with min 16 lines of text operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition suitable provision for network connectivity interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908 2021 IS 2189 2008 EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP. [13-10-3]

Supplying, installing, testing and commissioning of addressable optical smoke detector single/twin LED’s with 360 degree view suitable for low voltage 15 to 32 V DC two wires supply in-built locking mechanism to check the removal and pilferage of the detector in built isolation mode start up current 300µA and alarm condition current shall be maximum 6.5 mA operating temperature 0°C to 50°C humidity 0-95% RH IP 41 conforming to IS 2189 2008 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FF-AFAS/SD . [13-10-6]

Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors in built isolation mode suitable for offices/ceiling cable trenches/less ventilation area's etc. with 3 years equipment replacement warranty IS 2175 - 1988 reaffirmed 2000 IS 15908 2021 standards FF-AFAS/SD. [13-10-7]

Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type) made of addressable break glass plastic square in shape surface/flush mounted with Break Glass massage embedded on the glass complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP. [13-10-9]

Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) 1982 reed relays EN 54 or UL Listed FF-AFAS/CRM [13-10-10]

Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) 1982 Reed relays FF-AFAS/MM [13-10-11]

Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) 1982 Reed relays FF-AFAS/ISM [13-10-12]

Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908 2021 with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54 conforming to IS 2189 2008 IS 15908 2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH. [13-10-13]

Supplying, erecting, testing and commissioning of 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA/AFR [10/30w =300/120=2.5) [13-11-1]

Supplying, erecting, testing and commissioning of 15 to 30 Watts sound column or ceiling mounted complete as per specification no. FF-PA/SOC [13-11-2]

Supplying, erecting, testing and commissioning of stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector stereo jack complete as per specification no. FF-PA/MIC [13-11-3]

Supplying, erecting, testing and commissioning of rust free microphone floor stand of chrome plating/powder coating or S.S. material 500 mm to 1500 mm height and sturdy mechanism ensuring trouble free movement complete. [13-11-4]

Supplying, erecting, testing and commissioning of 1.5 sq. mm speaker wire complete. [13-11-10]

Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler 15 mm (½ ) dia. NBCM Body chrome finished 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR. [13-12-1]

Supplying, erecting, testing and commissioning of vane type water flow detector 75/80 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes. [13-12-2]

Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. [13-15-1]

Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete. [16-1-5]

Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables pipes & clearing the site by removing debris & making the site as required complete. [16-1-6]

Making cement concrete foundation in 1 2 4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps). [16-3-5]

Providing and fixing high-density polyethylene (HDPE) container one piece moulded triple layer water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet outlet overflow pipe inclusive of all tanks capacity up to 20000 litres. [4-8-7]

Carrying out core cutting of size 3 to 5 dia x 15 length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original. (with note) [3-11-77]

Supplying and installing auto glow (Viewing up to 15 mtr length) fire signages in PVC/Vinyl 4/6mm thick sheet or as per sample approved by client viz fire hydrant fire hydrant fire extinguishers fire exists fire door fire hose box fire & Electrical & safety etc size 300mm* 100 mm (Rates are taken from previously sanctioned estimate D1104512022-23 Mumbai subdivision vide letter no 173/2022-23 ) [NON CSR] [999-1-1]

Supplying and erecting ABC powder type fire extinguisher as per IS 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall. [NON CSR] [999-1-2]

Supplying and installing auto glow (Viewing up to 15 mtr length) fire signages viz fire hydrant fire hydrant fire extinguishers fire exists fire door fire hose box fire & Electrical & safety etc size 450mm* 150 mm (Rates are taken from previously sanctioned estimate D1104512022-23 Mumbai subdivision vide letter no 173/2022-23 ) [NON CSR] [999-1-3]

Supply & Eracting 1000 mm long 25 mm dia. Stainless steel corrugated flexible pipe (hose)nfor dropping sprinkler below false ceiling pipe shall have 16 bar rating and with union/reducer coller clamps etc. as required.(Rates are taken from previously sanctioned estimate D1104512022-23 Mumbai subdivision vide letter no 173/2022-23 ) [NON CSR] [999-1-4]

Supply lnstaltation testing & commisrioning of flow switches in 80/100/150 mm dia pipe with all acceslories as required. [999-1-5]

Providing Lift System for proposed 200 bedded Super Speciality Hospital at Kemburli Mahad , Dist : Raigad. Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No WG-MA/BW [1-3-1]

Supplying and erecting green colour earthing with 1x 1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No WG-MA/BW [1-3-1]

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. [1-6-2]

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter duly erected on provided plate and box with wiring connections complete. [1-6-11]

Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected. [1-6-29]

Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires modular type switch earthing and required accessories as per specification No WG-PW/CW [1-7-5]

Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires modular type switch earthing and required accessories as per specification No WG-PW/CW [1-7-6]

Supplying and erecting modular type (two module) electronic step regulator for fan duly erected on provided plate and box with wiring connections complete. [1-6-23]

Wiring for plug on board with Switch socket surface/concealed type copper wiring and earthing and with modular accessories as per specification No WG-PW/CW [1-7-26]

Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire modular type switch earthing and required accessories as per specification No WG-PW/SW. [1-7-12]

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens min. efficacy of 110 lumen/W CRI>80 CCT upto 6500K Beam Angle of 120 deg. THD<10% p.f. >0.95 operating range of 140-260V in built surge protection of 2.5 kV Life class of 50 000 Hrs. at L70B50 including driver IP66 IK09 rated on provided PVC Block / wooden board with 3 years warranty. [2-1-15]

Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens min. efficacy of 100 lumen/W CRI>80 CCT upto 6000K Beam Angle of 110 deg. Ripple<5% THD<10% p.f. >0.95 operating range of 200-270V surge protection of 2 kV Life class of 50 000 Hrs. at L70B50 including driver with end caps on provided PVC Block / wooden board with 3 years warranty. [2-1-18]

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades wire mesh duly erected complete. [2-10-13]

Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF [2-10-21]

Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original. [2-11-4]

Supplying and erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame metal mesh to avoid birds entry with necessary material suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC [2-11-14]

Supplying, erecting and marking DPMCB 6 A to 32 A B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-7]

Supplying, erecting and marking TPMCB 40A to 63A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-11]

Supplying and erecting triple pole and neutral distribution board (TPNDB) SP/TP MCBs total 4 ways /12 Poles with door 1.2mm thickness surface/flush mounted IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB [5-4-4]

Supplying and erecting single pole and neutral distribution board (SPNDB) with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs with door 1.2mm thickness surface / flush mounted IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB [5-4-8]

Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. [5-4-13]

Supplying, Erecting and Commissioning of 4 pole RCCB 40A electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB [5-6-5]

Supplying, fixing, and commissioning 4 pole RCBO 32/40A with overcurrent rated short-circuit breaking capacity (10 kA) and earth leakage protection with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO [5-6-13]

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU [7-2-8]

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 2 core 4 sq mm copper conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU [7-2-9]

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 10 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU [7-2-33]

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials testing & recording the results as per specification no ESE -LA [9-1-6]

Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EA-EP. [9-2-2]

SITC of Duplex Lift control system for two nos. microprocessor/PLC based simplex lift controllers along with necessary software with programming and hardware e.g. logic board necessary communication/control/data cabling laying in rigid PVC conduits/trunking etc. complete. [17-1-21]

SITC of Electric Traction Passenger cum Stretcher/Hospital Lift with · Rated capacity - 20 Passenger/1360Kg · Floors - G+3 floor (4 Stops/4 Landings) · Travel - 3 to 4.2 mtrs · Location of Lift Machine - MR/MRL · Rated speed - 1.0mps VS · Car/Landing door clear opening of 1100/1200 mm wide x 2000 mm high · Clear Car size of 1300 mm wide x 2400 mm deep x 2250mm high · Lift shaft available having clear size of 1900 mm wide x 3000 mm deep 1500 mm Pit depth 4200 mm Overhead. · Doors type - COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory) · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm thick with hairline finish with frame made from MS girders bracing of adequate size with minimum safety factor of 5 with Toe Guard Apron with necessary false ceiling with adequate LED lights blower/fan for ventilation & SS chequered plate flooring handrails mirror emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI scrolling UP/DN LED indicator & with / without attendant key switch OWD with audio-visual alarm VAS in Marathi Hindi & English with intercom system with telephone instrument in Lift car LMR & FCC/ground floor. · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI Lift car arrival & next travel direction audio-visual indication at all landings. · Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent overvoltage over speed overheat for all devices including lift motor and travel direction protection protection for phase loss at input or output etc. various operation modes such as maintenance change direction by attendant full load bypass VIP call operation self levelling operation call cancel facility auto return to home landing fireman evacuation operation earthquake operation door open/close operation from COP etc. The system can record information for minimum 30 latest faults with real-time clock management and handheld keypad with LCD screen for view and setting of parameters The control panel duly wired with proper size & strength copper wire for power & control circuit with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20 FHD TV monitor to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory) with Traction pulley OSG electromagnetic brakes entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves suspension wire ropes/belts of adequate size & strength. · Other mechanical parts such as T section adequate size guide rails for car & counter weight with brackets fasteners counter weight frame with necessary blocks buffers with necessary support arrangement MS pit ladder etc. erected with necessary steel work. · Minor civil work such as alteration work if any necessary for erection of landing door frames and its accessories e.g. sill header hole pass etc complete with plaster finish civil work for erection buffers erection of lift machinery adequate size core cuts if required & scaffolding for erecting guide rails providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. · General - Job includes entire procedure of obtaining all necessary erection permissions & License to Work the Lift from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning. ADD ON A6 For Lift having 1200mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel] this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators extension of guide rails shaft wiring with trunking travelling cables main hoisting ropes/belts & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. Rs. 155908 ADD ON B1 For Full Collective control system add as below. 1 For Lift travelling above First floor & up to Sixth floor RS. 27340 ADD ON C For additional 2MP Camera along with necessary accessories at Home Landing add as given. Rs. 13460 So Total = 1934721+(155908*2)+(27340)+ (13460*2) = Rs. 2300797 /- Considering 5 % rate rise Rs. 2415836.85 [17-1-10]

Providing Air conditioning System for proposed 200 bedded Super Speciality Hospital at Kemburli Mahad , Dist : Raigad. Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No WG-MA/CC [1-1-9]

Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV [1-3-14]

Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV [1-3-15]

Supplying 16 amp. 3 pin plug Top bakelite type of 230 V. A.C. supply. [1-5-17]

Supplying, installing, testing and commissioning of split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 5.00 suitable to operate on 250V 50 Hz A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser minimum 2.5PM filter self diagnosis feature stabilizer free operation & temperature display on indoor unit noise level maximum 50dBA at position as per specification no. APAC/ WAC [3-2-9]

Supplying, installing, testing and commissioning of split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V 50 Hz A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser minimum 2.5PM filter self diagnosis feature stabilizer free operation & temperature display on indoor unit noise level maximum 50dBA at position as per specification no. APAC/ WAC [3-2-10]

Supplying, installing, testing and commissioning of split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V 50 Hz A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser minimum 2.5PM filter self diagnosis feature stabilizer free operation & temperature display on indoor unit noise level maximum 50dBA at position as per specification no. APAC/ WAC [3-2-12]

Supplying, installing, testing and commissioning of split type room air conditioning unit 2.5TR to 2.7TR capacity with refrigerant R32 415V 50 Hz A.C. supply having 1 no of air handling unit (Mega split) mounting type complete with temperature display on indoor unit noise level maximum 50dBA at position as per specification no. AP-AC/WAC [3-2-15]

Providing vaccumising the airconditioner system to 200 micron and charging with refrigerant R32 for AC unit. [3-10-24]

Supplying, erecting, testing and commissioning of 6HP VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant for minimum cooling capacity as delivering 100% capacity at 47° C non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00 modular type horizontal hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area rain protection cover built in oil separator accumulator and oil receiver copper tube aluminium fin air cooled condenser condenser fan with motor suitable for 415V±10% 50 Hz 3 phase power supply (all suitable for high ambient conditions) internal copper refrigerant piping internal wiring and refrigerant etc. all housed in powder coated weather proof cabinet complete. [3-11-1]

Supplying, erecting, testing and commissioning of 14HP VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant for minimum cooling capacity as delivering 100% capacity at 47° C non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00 modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area rain protection cover built in oil separator accumulator and oil receiver copper tube aluminium fin air cooled condenser condenser fan with motor suitable for 415V±10% 50 Hz 3 phase power supply (all suitable for high ambient conditions) internal copper refrigerant piping internal wiring and refrigerant etc. all housed in powder coated weather proof cabinet complete. [3-11-5]

Supplying, erecting, testing and commissioning of 16HP VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant for minimum cooling capacity as delivering 100% capacity at 47° C non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00 modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area rain protection cover built in oil separator accumulator and oil receiver copper tube aluminium fin air cooled condenser condenser fan with motor suitable for 415V±10% 50 Hz 3 phase power supply (all suitable for high ambient conditions) internal copper refrigerant piping internal wiring and refrigerant etc. all housed in powder coated weather proof cabinet complete. [3-11-6]

Supplying, erecting, testing and commissioning of 18HP VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant for minimum cooling capacity as delivering 100% capacity at 47° C non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00 modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area rain protection cover built in oil separator accumulator and oil receiver copper tube aluminium fin air cooled condenser condenser fan with motor suitable for 415V±10% 50 Hz 3 phase power supply (all suitable for high ambient conditions) internal copper refrigerant piping internal wiring and refrigerant etc. all housed in powder coated weather proof cabinet complete. [3-11-7]

Supplying, erecting, testing and commissioning of 20HP VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant for minimum cooling capacity as delivering 100% capacity at 47° C non stop cooling even at 56°C and coefficient of performance (COP) 3.00 to 4.00 modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area rain protection cover built in oil separator accumulator and oil receiver copper tube aluminium fin air cooled condenser condenser fan with motor suitable for 415V±10% 50 Hz 3 phase power supply (all suitable for high ambient conditions) internal copper refrigerant piping internal wiring and refrigerant etc. all housed in powder coated weather proof cabinet complete. [3-11-8]

Supplying, erecting, testing and commissioning of 26HP VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant for minimum cooling capacity as delivering 100% capacity at 47° C non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00 modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area rain protection cover built in oil separator accumulator and oil receiver copper tube aluminium fin air cooled condenser condenser fan with motor suitable for 415V±10% 50 Hz 3 phase power supply (all suitable for high ambient conditions) internal copper refrigerant piping internal wiring and refrigerant etc. all housed in powder coated weather proof cabinet complete. [3-11-11]

Supplying, erecting, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.3TR (421 cfm) to 1.7TR (586 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor copper tube aluminium fin evaporator coil washable air filter insulated drain tray expansion device cordless remote control with necessary controls with 3-core copper flexible cord of required length and electrical terminal to receive power supply etc. IDU shall have anticorrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting having an electronic control console provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation connected to the system complete. [3-11-15]

Supplying, erecting, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.8TR (594 cfm) to 2.2TR (655 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor copper tube aluminium fin evaporator coil washable air filter insulated drain tray expansion device cordless remote control with necessary controls with 3-core copper flexible cord of required length and electrical terminal to receive power supply etc. IDU shall have anticorrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting having an electronic control console provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation connected to the system complete. [3-11-16]

Supplying, erecting, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.0TR (1100 cfm) to 3.2TR (1165 cfm) having EER as per BEE standards and specifications suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements fan refrigerant liquid and refrigerant piping cordless remote control and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase 230V 50Hz AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. [3-11-22]

Supplying, erecting, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.3TR (1165 cfm) to 4.0TR (1218 cfm ) having EER as per BEE standards and specifications suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements fan refrigerant liquid and refrigerant piping cordless remote control and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase 230V 50Hz AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. [3-11-23]

Supplying, erecting, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 4.1TR (1218 cfm) to 5.0TR (1624 cfm)of suitable cfm having EER as per BEE standards and specifications suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements fan refrigerant liquid and refrigerant piping cordless remote control and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase 230V 50Hz AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. [3-11-24]

Supplying, erecting, testing and commissioning of VRF/VRF based concealed split ductable type high static room/indoor unit (IDU) having nominal cooling capacity of 1.8TR (600 cfm) to 2.0TR (800 cfm) having EER as per BEE standards and specifications with evaporator fan with motor copper tube aluminium fin evaporator coil washable air filter insulated drain tray in built drain pump expansion device cordless remote control with necessary controls and electrical terminal to receive power supply etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable for ceiling suspended having an electronic control console with providing any additional refrigerant and oil charge as per requirement during installation complete. [3-11-38]

Supplying, erecting, testing and commissioning of VRV / VRF based ductable type high static room/indoor unit (IDU) having nominal cooling capacity of 2.5TR (980 cfm ) to 3.0TR (1200 cfm) having EER as per BEE standards and specifications with evaporator fan with motor copper tube aluminium fin evaporator coil washable air filter insulated drain tray in built drain pump expansion device cordless remote control with necessary controls and electrical terminal to receive power supply etc. having anti-corrosive coating suitable for coastal area and decorative slim dimension suitable for ceiling suspended arrangement with an electronic control console and any additional refrigerant and oil charge as per requirement during installation complete. [3-11-52]

Supplying, erecting, testing and commissioning of VRV / VRF based ductable type high static indoor unit (IDU) having nominal cooling capacity of 3.1TR ( 1240 cfm )to 4.0TR ( 1600 cfm ) having EER as per BEE standards and specifications with evaporator fan with motor copper tube aluminium fin evaporator coil washable air filter insulated drain tray expansion device cordless remote control with necessary controls and electrical terminal to receive power supply etc. having anti-corrosive coating suitable for coastal area with suitable ceiling suspension arrangement with an electronic control console and any additional refrigerant and oil charge as per requirement during installation connected with the system complete. [3-11-53]

Supplying, erecting, testing and commissioning of VRV/VRF based ceiling suspended 4.0TR treated fresh air (TFA) (3310 cfm) room/IDU with evaporator fan with motor copper tube aluminium fin evaporator coil washable air filter insulated drain tray in built drain pump expansion device cordless remote control with necessary controls and electrical terminal to receive power supply etc. having anti-corrosive coating suitable for coastal area with decorative slim dimension suitable ceiling suspended arrangement and an electronic control console with any additional refrigerant and oil charge as per requirement during installation complete. [3-11-57]

Supplying, erecting, testing and commissioning of VRV / VRF based ceiling suspended 8.0TR (6600 cfm) to 10.0TR (8200 cfm) Treated Fresh Air (TFA) (5380 cfm) room/IDU with evaporator fan with motor copper tube aluminium fin evaporator coil washable air filter insulated drain tray in built drain pump expansion device cordless remote control with necessary controls and electrical terminal to receive power . having anti-corrosive coating suitable for coastal area with decorative slim dimension suitable ceiling suspended arrangement and an electronic control console with any additional refrigerant and oil charge as per requirement during installation complete. [3-11-59]

Carrying out core cutting of size 3 to 5 dia x 15 length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original. [rate with note of 30 % recution] [3-11-77]

Supplying, erecting, testing and commissioning of wireless remote control having colour LCD panel real time clock temperature limitation (16 to 30° C functions like filter clean reminder timer suitable to communicate with wired controller complete. [3-11-78]

Supplying, erecting, testing and commissioning of centralised programmable remote control panel (HMI) touch manager controls minimum 16 system of 64 ODU's can be controlled and up to 992 IDU's can be individually mounted and controlled indoor units having colour min 200mm size LCD touch panel yearly schedule power proportional distribution function temperature limitation history function complete erected on wall integrated with provided fire alarm system. [3-11-79]

Supplying, erecting, testing and commissioning of manually operated opposed blade duct mounted flanged volume control dampers of required sizes in GI construction with operating mechanism mounting arrangement rubber refrigerant kits etc. complete. [3-11-80]

Supplying, erecting, testing and commissioning of volume control box with collar for control damper of required sizes in GI construction with operating mechanism mounting arrangement rubber refrigerant kits etc. complete. [3-11-81]

Supply, fabrication, installation and testing of flexible canvas connections constructed between ductable unit/dampers/ducting of suitable size with fire resist flexible double canvas sleeve complete. [3-11-82]

Providing adhesive thermal insulation for supply return air duct with 19mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC-2017. [3-11-83]

Providing & applying of acoustic insulation for air ducts with 25mm thick 48 kg/cu.m fiber glass faced with RP tissue and covered with 26 SWG perforated aluminium sheets complete. [3-11-84]

Supplying and installing of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways Nitrile rubber insulation painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system. [3-11-86]

Supplying and installing of collar damper of galvanised iron material of upto 120 microns for anti corrosive resistance for supply air grill of suitable size. [3-11-87]

Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45°. [3-11-88]

Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-90]

Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-91]

Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 22.2mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiation with OEM standards of VRV/VRF air conditioning system complete. [3-11-92]

Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-93]

Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-94]

Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-95]

Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-96]

Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 6.4mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-97]

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater/AC system. [4-2-14]

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater/AC system. [4-2-15]

Supplying and erecting 25/32 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC) thickness 3.2 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC [4-2-19]

Supplying and erecting 32/40 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC) thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC [4-2-20]

Supplying, erecting and marking DPMCB 6A to 32A C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-6]

Supplying, erecting and marking TPMCB 6A to 32A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-10]

Supplying, erecting and marking TPMCB 40A to 63A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-11]

Supplying, erecting and marking FPMCB 40A to 63A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-13]

Supplying and erecting triple pole and neutral distribution board (TPNDB) SP/TP MCBs total 12 ways /36 poles with door 1.2mm thickness surface/flush mounted IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB [5-4-6]

Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. [5-4-13]

Supplying, fixing, and commissioning 4 pole RCBO 32/40A with overcurrent rated short-circuit breaking capacity (10 kA) and earth leakage protection with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO [5-6-13]

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes panel boards etc. including cutting bending drilling welding riveting treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. [6-1-1]

Supplying and erecting GI sheet 0.6 mm (24 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629 1985 to be used for fabrication of boxes panel boards etc. including cutting bending drilling welding riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. [6-1-2]

Supplying and erecting GI sheet 0.8 mm (22 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629 1985 to be used for fabrication of boxes panel boards etc. including cutting bending drilling welding riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. [6-1-3]

Supplying and erecting GI sheet 1 mm (20 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629 1985 to be used for fabrication of boxes panel boards etc. including cutting bending drilling welding riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. [6-1-4]

Supplying and erecting iron work sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. [6-1-19]

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 10 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU [7-2-33]

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 16 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU [7-2-34]

Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware. [7-11-6]

Supplying and erecting G.I. stay set for poles including loop insulators at inaccessible height with anchor plate 300x300x6mm. straining screws G.l. stay wire 7/10 SWG G.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement concrete foundation complete. [8-6-1]

SITC OF HEPA Plenum withSS 304 Diffuser grill & Terminal HEPA Filters For Ophthalmic OT Plenum designed as per NABH standards 1.Plenum MOC Stainless steel 304 2.Plenum Size 2620mm x2620mm [8 ft x 8 ft] 3.Plenum Diffuser Grill The high quality S.S.304 Diffuser grill for securing unidirectional air flow according to EN ISO 14644. SS 304 grill designed to deliver uniform air velocity across the entire HEPA plenum to maintain uniform air displacement on the OT table. 4.Central Opening Plenum design with opening for OT lamp nor more than 300*300 with cover plate 5.Filter housing and pressure chamber MOC stainless steel 304 matt polish thickness 1.2 mm. 6.Filter section - Mini-pleat (H14) grade HEPA Filters placed as Terminal Filters [31-1-11]

Supply installation testing and comissiong of Return Air Risers made out from SS 304 perforated grilles not less than 70% free area for air passage hidden nut & bolt flanges all corner well covered etc.front face of grille shall be flushed with wall complete arrangement shall be leakproof with volume control dampers filters etc. complete as required. (NCR) [31-1-12]

Providing CCTV System for proposed 200 bedded Super Speciality Hospital at Kemburli Mahad , Dist : Raigad. Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with PVC accessories on wall /ceiling as per specification No WG-MA/CON. [1-2-4]

Supplying and laying HMS PVC conduit FRLS grade 32mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC [1-1-12]

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No WG-MA/BW [1-3-1]

Supplying and erecting green colour earthing with 1x 1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No WG-MA/BW [1-3-1]

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. [1-6-1]

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter duly erected on provided plate and box with wiring connections complete. [1-6-10]

Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected. [1-6-28]

Supplying and erecting 3m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete. [1-8-21]

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC [1-10-1]

Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC [1-10-7]

Supplying and erecting LSZH armoured multimode optical fibre cable with 6 fibres core dia 50/125 µm (OM3) suitable upto 10 GBPS ethernet distance at 850 nm of wavelength on wall/ceiling or laid in provided pipe/trench as per specification no. WG-COC/OFC LSZH [1-10-8]

Supplying, fixing, and configuring 8-ports 1 G unmanaged gigabit POE switch erected in provided rack complete. [1-11-1]

Supplying, installing & testing UTP connector (RJ-5) as per specification No. WG-NAS/UTPC. [1-12-1]

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK [1-12-18]

Supplying, installing, testing and commissioning of 2kVA capacity online pure sine wave with backup time of 1 hrs. PWM & IGBT based UPS with 0.8 to unity output pf single phase input & 1 phase output complete with all protections as per specification no. AP-UPS [3-7-2]

Supplying and erecting 12V/42Ah SMF battery with battery terminal wire duly charged with 24 months warranty complete [3-8-10]

Supplying & erecting of High definition 4/5 Megapixel IP IR PTZ Camera with following features Image Sensor minimum 1/2.8 Progressive Scan CMOS Video Resolution inimum 2880 x 1620 Video Compression H.264 H.265 or higher at least Three individually configurable stream Frame Rate minimum 30 fps at all resolutions WDR minimum 120 dB Wide Dynamic Range ONVIF profile conformant. Auto Tracking Pre-set Tour Settings Pan 360° endless Tilt From -15° to 90° (auto-flip 180°) minimum Pan Speed - from 0.1°/s to 160°/s minimum Preset Speed 240°/s minimum Tilt Speed - from 0.1°/s to 120°/s minimum Preset Speed 200°/s Min Presets- 250 Min IR distance 150m Lens Type minimum 4.3 - 12.5mm Lens min 16 x digital zoom min 30 x optical Zoom. Focus Mode Auto/Zooming/One Push Manual Lux sensitivity- minimum 0.2 Lux at color minimum 0.05 Lux at Black & White 0.0 Lux (IR) Night Vision Distance Min IR- 50m Power Supply support 12/24 VDC 24 VAC & PoE IP67/IP66 IK10 built in micro D/SDHC/SDXC card slot minimum 256 GB built in microphone. minimum Input/Output Audio in × 1 Audio Out × 1 Alarm in× 1 Alarm Out × 1. Image Settings Rotate mode saturation brightness contrast sharpness gain white balance. Image Enhancements Day/Night-Auto (ICR)/Color/Black & White 3D Digital Noise Reduction Automatic White Balance Automatic Gain Control Backlight Compensation Highlight Compensation [2-1-20]

Supplying & erecting of High definition 4/5 Megapixel IP IR Bullet Camera with following features Image Sensor minimum 1/2.8 Progressive Scan CMOS Video Resolution minimum 2592 x 1520 Video Compression H.264 H.265 or higher at least Three individually configurable stream Frame rate minimum 25 fps at all resolutions WDR minimum 120 dB Wide Dynamic Range ONVIF profile conformant minimum IR distance 50m Lens Type 2.8/4/6 mm Lens fixed focal Field of View 2.8 mm horizontal FOV 107° vertical FOV 57° diagonal FOV 129° 4 mm horizontal FOV 86° vertical FOV 47° diagonal FOV 102° 6 mm horizontal FOV 55° vertical FOV 29° diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color minimum 0.05 Lux at Black & White 0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan 350° Tilt 72° Rotate 350°. Power Supply Support 12VDC & PoE IP67 IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB Built in microphone. minimum Input/Output - Audio in × 1 Audio Out × 1 Alarm in × 1 Alarm Out × 1. Image Settings Rotate mode saturation brightness contrast sharpness gain white balance. Image Enhancements Day/Night-Auto (ICR)/Color/Black & White 3D Digital Noise Reduction Automatic White Balance Automatic Gain Control Backlight Compensation Highlight Compensation. Events Privacy Masking Motion detection Scene change detection Face capture Video tampering audio exception detection Region entrance detection Region exiting detection. Operating temperature ( -30 to 60° C ). Security - User account and password protection HTTPS IP filter IEEE 802.1X digest authentication user access log TLS1.2 AES - 256 SSH/Telnet closed FTP disabled. Protocol - DHCP UDP HTTP HTTPS NTP DNS RTP RTSP SMTP SSL/TLS TCP/IP Secure Real-Time Transport Protocol (SRTP) Bonjour SNMP and Secure shell (SSH) supported protocol. RoHS WEEE ISO-14001 and REACH compliant UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable CE FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting height not more than 5 meter) etc with all accessories etc complete as per specification no. CCTV-CAM [35-1-16]

Supplying & erecting of High definition 4/5 Megapixel IP IR Dome Camera with following features Image Sensor minimum 1/2.8 Progressive Scan CMOS Video Resolution minimum 2592 x 1520 Video Compression H.264 H.265 or higher at least Three individually configurable stream Frame rate minimum 25 fps at all resolutions WDR minimum 120 dB Wide Dynamic Range ONVIF profile conformant minimum IR distance 50m Lens Type 2.8/4/6 mm Lens fixed focal Field of View 2.8 mm horizontal FOV 107° vertical FOV 57° diagonal FOV 129° 4 mm horizontal FOV 86° vertical FOV 47° diagonal FOV 102° 6 mm horizontal FOV 55° vertical FOV 29° diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color minimum 0.05 Lux at Black & White 0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan 350° Tilt 72° Rotate 350°. Power Supply Support 12VDC & PoE IP67 IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB Built in microphone. minimum Input/Output - Audio in × 1 Audio Out × 1 Alarm in × 1 Alarm Out × 1. Image Settings Rotate mode saturation brightness contrast sharpness gain white balance. Image Enhancements Day/Night-Auto (ICR)/Color/Black & White 3D Digital Noise Reduction Automatic White Balance Automatic Gain Control Backlight Compensation Highlight Compensation. Events Privacy Masking Motion detection Scene change detection Face capture Video tampering audio exception detection Region entrance detection Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection HTTPS IP filter IEEE 802.1X digest authentication user access log TLS1.2 AES - 256 SSH/Telnet closed FTP disabled. Protocol - DHCP UDP HTTP HTTPS NTP DNS RTP RTSP SMTP SSL/TLS TCP/IP Secure Real-Time Transport Protocol (SRTP) Bonjour SNMP and Secure shell (SSH) supported protocol. RoHS WEEE ISO-14001 and REACH compliant UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable CE FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting height not more than 5 meter) etc with all accessories etc complete as per specification no. CCTV-CAM. [35-1-19]

Supplying installing testing & commissioning of 64/80 Ch Network Video Recorder (NVR) suitable connect Min. 64 IP Cameras up to 5 Megapixel Resolution with HDMI 1/VGA 1 and HDMI 2/VGA 2 outputs provided Atleast one HDMI output of 4K resolution atleast one VGA output with output up to 1920 × 1080 Support H.265 or higher H.264 MJPEG Supports Redundant Dual Power Incoming Bandwidth 320 Mbps with minimum 8 SATA Hard Disks ANR Technology 8 SATA interfaces for 8 HDDs and capacity of each HDD up to 8TB minimum 02 USB port Alarm I/O 16/4 RJ-45 10/100/ 1000 Mbps self adaptive Ethernet interface support multi brand network Cameras ONVIF conformance Multiple network monitoring Web viewer . support protocol TCP/IP DHCP DNS DDNS NTP SADP SMTP NFS iSCSI UPnP™ HTTPS. RoHS UL CE FCC certified. duly erected in provided U Rack with wiring connections tagging and programming etc. complete as per specificationss no. CCTV-NVR [2-1-16]

Supplying & erecting 55 professional LED display with 1920 *1080 ( Full HD) Display suitable for 32/64 channel NVR and following features Brightness minimum 500 Cd/m2 Contrast Ratio minimum 1000 1 Viewing angle 178/178 deg. Response time maximum 8 ms Inputs HDMI VGA BNC USB Audio In Built-in speakers maximum 10 W Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON [30-1-472]

Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR interface transfer rate 6 GB/S maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+ Cameras supported up to 64 Cache (MB) 256 Load/Unload Cycle -3000000 Work Load Rating per Year 180TB MTBF 1000000 Hrs. HTTPS. RoHS UL CE certified duly erected in position in provided NVR as per specification no. CCTV-HDD [2-1-14]

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes panel boards etc. including cutting bending drilling welding riveting treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. [6-1-1]

Supplying and erecting iron work sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. [6-1-19]

Providing Cold Room Mortuary System for proposed 200 bedded Super Speciality Hospital at Kemburli Mahad, Dist : Raigad . Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-90]

Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-91]

Supplying and erecting GI sheet 1 mm (20 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629 1985 to be used for fabrication of boxes panel boards etc. including cutting bending drilling welding riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. [6-1-4]

Supplying and erecting GI sheet 0.8 mm (22 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629 1985 to be used for fabrication of boxes panel boards etc. including cutting bending drilling welding riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. [6-1-3]

Supplying and erecting iron work sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. [6-1-19]

Supplying and erecting tile type modular diffuser made from aluminium sheet with powder coated matching to the ceiling shade for provided supply and return air complete. [3-11-85]

Making cement concrete foundation in 1 3 6 cement concrete (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). [16-3-7]

Supplying, erecting, testing and commissioning of air curtain of 6 feet width having air throw velocity of 21 m/sec low noise level up to 38 to 46dBA suitable for door height upto 9 feet working on 1 phase 230V 50Hz A.C. supply. [3-11-76]

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 6 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU [control panel to condensing unit) [7-2-32]

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 4 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (control panel to ahu) [7-2-31]

Fresh Body-Room 4.6 (L) X 4.1 (W) X 4.3 (H) Mtrs Supply & erection of 80 mm thick PUFF insulated internal Panels in the mortuary cold- room of non-corrosive 304 grade Stainless. The SS panels will be sandwiched PUFF insulated of 80 MM thick having density 40kg/M3 including Camlocks. Both side covered by 0.5 MM thick SS sheet of 304 grade. It will be having heat resistance capacity as well as enabling washing & cleaning the cold-room internally. The Morgue Room will be of size 4.6 (L) X 4.1 (W) X 4.3 (H) Mtrs [NON CSR] [30-1-491]

Stainless steel Morgue Door Supply & erection of 1.060Mtr. W X 2.000 Mtr. height SS Sliding Door with 100% Air tight arrangement having 100 MM thickness made from (SS 304 sheet) sandwich PUFF insulated. Each door will be having Heavy duty Stainless steel Hinges handles Door Gaskets etc. [NON CSR] [30-1-492]

Air-cooled condensing units (De-composed Body Area) Refrigeration Units of aggregate capacity 8 TR (3800 BTU/Hr.) each consists of Scroll compressor (Emerson or Similar make) Air-cooled Blue finned copper Cond. Coil of Kuler / Guntner make of 1 fin/ 4 mm of Max. operating pressure 32 bar along with drive package like single phase motor with Fan blade Suction Accumulator Service Valves & PLC Control’s etc. with 100 % standby arrangement working on R404A Ref.The approx. power consumption will be 2.3 Kw/Hr. The weight of the Cond. Unit will be 240Kg. / Unit. 2 Units Set Of [NON CSR] [30-1-493]

Supply erection testing & Commissioning of floor mounted Evaporative Units for Fresh Body Morgue Room. The outer skin will be of 0.63 mm Pre coated GSS Inner skin will be of 0.63 mm Plain SS with 80 MM thick sandwiched PUFF insulated panel AHU consisting of 3200 CFM 75 mm static Axial Fans & Electronic defrostic system. The Evaporator section will be consisting of 6 Row Dx cooling coil complete with Expansion valve drier core distributer Sporlan Dx Expansion valves with Power elemnt suitable to work with R 404A refrigerent. The Axial fan motor will be of TEFC 2 HP/230 Volts50 HZ. The Evaporator is designed to achieve 0 Deg. Cent.( 0 Deg. C.)Temperature In Room. The AHU consists of Supply Air connection & Mixing Box for & Return Air. [NON CSR] [30-1-494]

Stainless Steel make (304 grades) Tray 3 tier Rack for storing of 3 Body in each rack. The Overall dimensions of the Rack will be 2000 X 700 X 1676 MM H. The Rack will be fabricated with SS Angle size 40 x 40 x1.6 MM equipped with 100 MM dia. Heavy duty industrial wheel with stopper arrangement to move the rack in the Mortuary for cleaning purpose. The Tray will be removable type to enable easy shifting of body from the tray. The SS Heavy duty C channel will be provided into rack as travel rail for the SS tray for smooth movement of Trays in the racks. [30-1-495]

Stainless Steel make (304 grades) Tray 3 tier Rack for storing of 3 Body in each rack. The Overall dimensions of the Rack will be 2000 X 800 X 1676 MM H. The Rack will be equipped 100 MM dia. Heavy duty industrial wheel with stopper arrangement to move the rack in the Mortuary for cleaning purpose. The Tray will be removable type to enable easy shifting of body from the tray. The SS Heavy duty C channel will be provided into rack as travel rail for the SS tray for smooth movement of Trays in the racksfor easy & smooth movement of Trays in the racks.[ NON CSR] [30-1-496]

Providing & installing Hydraulic Trolley for movement of Dead Body in morgue as per following Tech. Specifications.Hydraulic Lift Trolley Size It shall be made of SS-304 grade sections & sheets having overall size 2032 mm× 610 mm × 2103 mm.(+/-10 mm variations)Load carrying Capacity 250 Kgs. Finish Matt Polish SS.Construction SS 304 Complete structure (except Hydraulic Pump & Castors)SS Sections used box pipes (50mm x 25mm) round pipes (25mm dia) flats as required. 2.Platform for Stretcher Open-type to suit the above stretchers.Lifting System Stretcher is lifted by a single acting hydraulic cylinder manually by a Foot pump. 3.The Foot-pump It should be made of Mild Steel and is duly Nickel chrome Plated for long life. 4. Lowering System By Foot-operated Release pedal. The Stretcher will rest at Lowest level 5. Fully Lowered Platform Height 450 mm. (Approx). 6.Fully Lifted Platform Height 1600 mm. (Approx). Wheels The Trolley is easily maneuvered by Steering on 2 nos. Swivel Castors with 125mm Ø x 50mm width ball bearing Polymer-PU bonded Wheels fitted at the rear end. At the front end there are 2 nos. Fixed Castors of same size & type. Operating system The Trolley having 1 no. empty stretcher placed on the platform can be taken to the site as required with ease. The Trolley then needs to be locked in position by using the floor lock provided near the handle. The cadaver shall be kept on the trolley stretcher manually. The trolley can now be taken to the Mortuary cold room for storing. On reaching the place the stretcher has to be raised /lowered to required height by Manual- Hydraulic Foot-pump. Once the stretcher is in the line with the channels of the rack the stretcher can be pushed in place from the trolley platform to rack with easy movement. The Platform can now be lowered by operating the Pressure Releasing Switch thus trolley is ready for other [ NON CSR] [30-1-497]

Supplying and fixining of accoustic insulation inside ducting with arma sound 10 mm thick insulation to avoide the sound inside [NON CSR] [30-1-498]

Carrying out Insulation of Supply & return air ducting of Morgue with Aroflex / K-flex class “O” insulation of 50 MM thick for fabrication of Plenum for the supply & Return air GI ducting of the morgue [NON CSR] [30-1-499]

Supplying and carrying out 26 SWG Aluminium cladding over the supply and return air ducting complete groving and drilling bending cutting as per standard etc.. [30-1-500]

Supply installation testing and commissioning of manually operated opposed blade duct mounted flanged volume control dampers of required sizes in SS construction to avoid rusting and corrosion of damper handle to oparate smooth in long time with operating mechanism mounting arrangement rubber refrigerant kits etc. complete. [30-1-501]

Supplying and fixing of motor for damper to stop the air flow of AHU which is in stand by and vise versa [NON CSR] [30-1-502]

Supplying and erecting SS powder coated linear perforated grill to avoid rusting and corrosion of grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45°. [NON CSR] [30-1-503]

The surface of the flooring will be first covered with tarfelt of 2 mm thickness and then insulated by 80 MM Puff insulation layer covered with 20 micron aluminum foil. Then entire surface will be covered with hot bitumen. And finally entire floor surface will be finished with KOTA Stones. [30-1-504]

Providing Shed for Covering ODU And accessories kept outside the plant areas. Providing Minimum 8 mtr ( Wide x 6 mtr ( Length) x 4 mtr ( Height ) Shed with support of minimum 8 Nos of size 100 x 75 x 6 mm channel duly grouted in ground with PCC Block Horizontal frames of min 50 x 50 x6 mm thick angle irons frames Covered with GI Corrugated minimum 16 SWG GI Sheet clamped with propoer support of M.S. angles and Hooks .The Entire shed shall be painted with 2 coats of red oxide and two coats of epoxy paints . [30-1-505]

VFDs-Variable Frequency DrivesSupply installation testing & commissioning of VFDs.VFD designed for HVAC applications with built-in PID controller control panel (keypad & display) IP-65 enclosure (for outdoor applications) & IP-20 enclosure (for indoor applications) for use on AHU fans. The display should be in alpha-numeric characters and programming facility should be in user-friendly HVAC terminology. VFD’s shall have built-in harmonic filters with THDI less than 5%. No. VFD panel to be provided with digital display showing electrical parameters like voltage current and power consumption. No. VFD shall be installed in a dedicated external/internal enclosure and the inter connecting wires between driver and MCC shall be included. Necessary transformer power adapters sensors relay etc. as required for satisfactory operation shall be in the scope of VFD supplier. It should be BMS Compatible. 7.5 HP/ 5.6 KW [NON CSR] [30-1-506]

Supply installation and testing of under deck Insulation with 75mm thick extruded polystyerene of destiny 48 kg/m3 and along with all ancillary work as detailed in the specification. Installation of the insulation shall be done by the HVAC contractor in co-odination with the water-proofing contractor [NON CSR] [30-1-507]

Supplying installation of PVC non corrossive type Mist ELIMINATOR in the AHU to remove the water droplet particals from the supply air to avoid to tranfer of moisture and water droplets to the motor [NON CSR] [30-1-508]

Supplying fabricating erecting testing & commissioning16 swg Powder coated Cubical Electrical Panel system consists of main In- comer MCCB of 150 Amp. 5 No’s outgoing MCB’s of 63 Amps. 4 for Outdoor Unit and 1 spare & 3 No’s outgoing MCB’s of 63 Amps. 2 for Air handling Unit and 1 spare. Copper Bus Bar Cable Chamber ON/OFF arrangement Emergency stop arrangement with Digital temp. Indicator. For Cold Room. [NON CSR] [30-1-509]

Supplying erecting & terminating FR XLPE insulated galvanised steel wirearmoured (round) cable 1100 V 6 core 1.5 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Control panel to AHU [30-1-510]

Providing On Grid Solar System for proposed 200 bedded Super Speciality Hospital at Kemburli Mahad, Dist : Raigad . Supplying, installing, testing and commissioning of 20 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 60 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter proper base plate canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB MCB etc. wiring up to solar Inverter in casing and capping display board sign board two distinct earthing lightning arrester liaisoning charges remote monitoring system with maintaining card/chip for 5 years including net charges for RMS System complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG. [4-5-5]

Supplying, installing, testing and commissioning of 100 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 300 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter proper base plate canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB MCB etc. wiring up to solar Inverter in casing and capping display board sign board two distinct earthing lightning arrester liaisoning charges remote monitoring system with maintaining card / chip for 5 years including net charges for RMS System complete up to net meter Installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG. [4-5-7]

Supplying and installing of Solar PV Module cleaning unit consisting of nozzles spray necessary pipes valves post electronic panel board concealed with weather proof cabinet spreading water periodically for removal of dust related motor pump controller timer and nozzles set suitable for covering 5 KW Solar PV Module. (Approx. 35 Sq. Mtr. PV Module area). [4-8-8]

Supplying and erecting SS enclosure for MCCB suitable for up to 100A MCCB. [5-11-17]

Providing and erecting 4 Pole MCCB 415 V 100A rated short-circuit breaking capacity 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides insulation withstand capacity 800V no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB [5-5-1]

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes panel boards etc. including cutting bending drilling welding riveting treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. [6-1-1]

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars 500V 100A having 15mm (Width) X 3 mm (Thickness) with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG CRCA sheet and epoxy paint with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification no. CP-BB [6-2-1]

Supplying and erecting three phase 10 to 60 A net meter DLMS compliance of accuracy class 1.0 3 x 240V 50 Hz with backlit LCD display optical port and RJ 232 port (measures import kWh kVAh export kWh kVAh Net kWh kVAh V I kW 6 months history of energy) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer. [6-3-13]

Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. [6-5-2]

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 25 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU [7-2-35]

Supplying, installing & testing maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete and recording the results Specification no. EA-MOBI [9-1-5]

Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EA-EP. [9-2-2]

Making cement concrete foundation in 1 2 4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps). [16-3-5]

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 70 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU [7-2-23]

Royalty Charges Supply of Rubble, METERuruMeter, Soil, 60MeterMeter./40MeterMeter. Meteretal(Hand broken), royalty charges are not included in the rates.Any revision in Royalty charges and surcharge shall be included in the rate analysis of the respective iteMeter. If there is variation in these rates the difference shall be paid extra over the iteMeters to the contractor and shall be recovered if these rates are reduced by Govt. i.e. Revenue departMeterent. The GovernMeterent of METERaharashtra, Revenue and Forest DepartMeterents Gazette No.146 Dt. 04 June 2021 States that the Royalty charges of Rs. 216.18/cuMeter. are to be considered. The surcharge levied on Royalty shall also be payable to the contractor.

Testing Charges Carrying out below mentioned tests on MURUM-HARD as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Liquid Limit & Plastic Limit

Carrying out below mentioned tests on CEMENT as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Standard Consistency Fineness, Specific Gravity, Setting Time ( Initial & Final), Compressive Strength, Soundness

Carrying out below mentioned tests on WATER as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. PH Value, Sulphate & Chloride Content

Carrying out below mentioned tests on CRUSHED SAND as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Fineness Modulus (Sieve Analysis), Silt & Clay Content

Chloride & Sulphate Content

Silt Factor

Carrying out below mentioned tests on STEEL as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Upto 16 mm (Set of 3 Bars)

Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress, Weight-Per Meter, Bend / Rebend Test, Proof Stress.)

Nitrol Solution Test. (Set of 3 Bars)

Carrying out below mentioned tests on BRICKS as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Water Absorption (Set of 5 Bricks) , Compressive Strength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks)

Carrying out below mentioned tests on ALUMINIUM as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Thickness,Mass per Running Meter.

Test on Powder Coating

Carrying out below mentioned tests on FLUSH DOOR as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Knife Test, Adhesion Test, End Immersion Test

Carrying out below mentioned tests on TEAK WOOD as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Density, Moisture Content

Carrying out below mentioned tests on CERAMIC as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Water Absorption, Modulus of Rupture ( Set of 6 Tiles)

Carrying out below mentioned tests on GRANITE as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Water Absorption, Specific Gravity

Carrying out below mentioned tests on CEMENT(RIGID PAVEMENT) as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Standard Consistency Fineness, Specific Gravity, Setting Time ( Initial & Final), Compressive Strength, Soundness

Carrying out below mentioned tests on WATER as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. PH Value, Sulphate & Chloride Content

Carrying out below mentioned tests on KADAPPA as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Water Absorption, Specific Gravity

Carrying out below mentioned tests on MARBLE as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Water Absorption, Specific Gravity

Carrying out below mentioned tests on MURUM-SOFT as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Liquid Limit & Plastic Limit

Carrying out below mentioned tests on BITUMEN as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Penetration, Softening Point, Flash & Fire Point, Specific Gravity

Viscosity

Ducility/Elastic Recovery

Carrying out below mentioned tests on RUBBLE as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Crushing Value/Compressive Strength, Water Absorption & Specific Gravity

Carrying out below mentioned tests on PAVING BLOCK as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Compressive strength, Water Absorption (Set of 8 Blocks), Flexural Test (Set of 8 Blocks ), Resistance to wear (Set of 8 Blocks )

Carrying out below mentioned tests on CEMENT CONCRETE as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Compressive strength of C.C.Cube (Set of 3 cubes)

Concrete Mix Design by Normal Method (With all Tests on basic materials )

Carrying out below mentioned tests on CEMENT CONCRETE AGGREGATE as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Water Absorption, Specific Gravity, Impact Value, Crushing Value

Sieve Analysis

Flakiness Index & Elongation Index

Carrying out below mentioned tests on CEMENT CONCRETE(RIGID PAVEMENT) as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Compressive strength of C.C.Cube (Set of 3 cubes)

Flexural strength of Beam (For Rigid Pavement Only)

Concrete Mix Design by Normal Method (With all Tests on basic materials )

Carrying out below mentioned tests on RIGID PAVEMENT AGGREGATE as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Water Absorption, Specific Gravity, Impact Value, Crushing Value

Sieve Analysis

Flakiness Index & Elongation Index

Stripping Value (for Bituminous Work)

Carrying out below mentioned tests on GRANULAR SUB BASE as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Sieve Analysis

Liquid Limit & Plastic Limit

Field Moisture Content

Compaction Test (Proctor Density)

Carrying out below mentioned tests on WBM AGGREGATE as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Water Absorption, Specific Gravity, Impact Value, Crushing Value

Sieve Analysis

Flakiness Index & Elongation Index

Carrying out below mentioned tests on MPM AGGREGATE as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Water Absorption, Specific Gravity, Impact Value, Crushing Value

Sieve Analysis

Flakiness Index & Elongation Index

Stripping Value (for Bituminous Work)

Carrying out below mentioned tests on SEAL COAT AGGREGATE as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Water Absorption, Specific Gravity, Impact Value, Crushing Value

Sieve Analysis

Flakiness Index & Elongation Index

Stripping Value (for Bituminous Work)

Carrying out below mentioned tests on BM AGGREGATE as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Water Absorption, Specific Gravity, Impact Value, Crushing Value

Sieve Analysis

Flakiness Index & Elongation Index

Stripping Value (for Bituminous Work)

Compaction Test (Proctor Density)

Carrying out below mentioned tests on BC AGGREGATE as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Water Absorption, Specific Gravity, Impact Value, Crushing Value

Sieve Analysis

Flakiness Index & Elongation Index

Stripping Value (for Bituminous Work)

Compaction Test (Proctor Density)

Carrying out below mentioned tests on BITUMINOUS MIX as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Extration and Sieve Analysis of Bituminous mix (For BM/DBM/AC) (2 Samples of extraction for one sieve analysis including extraction)

Job Mix Design with all Tests on aggregate (Excluding Bitumen) for DBM/SDBC/AC/SMA (Stone Mastic Ashphalt)

B. M. Mix Design with all Tests on aggregate (Excluding Bitumen)

Drying Time

Dry Film Thickness

Flexibility

Gel Time

Pot Life

Volume of Solid