Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹42.7 L+₹1.9 L (4.72%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST |
Tender Value
₹43.5 L
EMD Value
₹86,900
Closing Date
12 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Abohar
Garrison Engineer Abohar Pin 152116
Provn of security wall with concertina coil at main gate of SASF Odianwali at Military Station Fazilka
2022_MES_551868_1
GE ABH-36/22-23
Open Tender
Civil Works
Item Rate
180 days
Fazilka Mil Stn
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE ABOHAR
₹86,900
Yes
28 Oct 2022
14 Sept 2022
14 Oct 2022
14 Sept 2022
12 Oct 2022
28 Sept 2022
Amount
SCHEDULE 'A' SECTION I (B&R Portion)
Surface excavation not exc.0.30 cm deep and averaging 15cm deep and getting out in soft/loose soil completed all as specified and directed.
Excavationin trenches not exceedig 1.5 mtr wide and not exceeding 1.5 mtr depth for pipe line,cable trenches or for manholesect not exceeding 10 sqm area on plan and not exceeding 1.5 mtr in depth and getting out in soft/loose soil complete all as per specified and directed.
Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
Returning filling in including spreading, evelling, watering and well ramming in layers not exceeding 25cm thick.
Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point and disposal.
M&L for PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundation,filling and mass concrete complete akk as specified and directed.
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
Mild steel TMT bar 5 mm dia over upto and including 10 mm dia stirrups , spacers and binder, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
Formwork to rough finished surface sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in flat.
M&L for RCC M25 (Design Mix) using 20mm graded crushed stone aggregate as in foundation,includings,footing, foundation, beams, plinth beam bases for columns,etc basement slabs, under-ramed piles and mass concrete completed allas specified and directed
Used & waste Formwork to sides of pillars, posts, struts, piers, columns with rought finished surfaces of concrete.
M&L for RCC M25 (Design Mix) using 20mm graded crushed stone aggregate as in Column pillars.piers and mass concrete complete all as specified and directed
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide
M&L for RCC M25 (Design Mix) using 20mm graded crushed stone aggregate as in beams ,cantilevers bressummers lintels over 1.50m span complete all as specified and directed
M & L for reinforced concrete 100 mm dia pipes class NP2 , laid and jointed completed with collars completed all as specified an d directed.
M & L for factory made Pre-cast cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as block masonary with solid blocks, exc 10 cm in width and setting in CM (1:6) completed all as specified.
M&L 40mm thick damp proof course to horizontal orvertical surface incl necesarry formwork, Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m , Polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m Completed all as specified and directed.
S&F MS flate iron fixed independly for bonding between column and brick work etc and similar small articles conforming of Fe 290 gde E 165 completed all as speecified and directed.
M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius ,built in CM 1:4 completed. ( Note ;- Groove of size 10 to 12 mm wide and full depth of plaster as approved by GE shall be provided to all meeting point to RCC and brick work on both side of wall deemed to be included in the quoted rate)
M & L for 15 mm thick rendering in cement mortor (1:4) on brock or concrete surfaces, fair and even all as specified and diredted.
supply only liquid water proofing compound
M & L for PCC (1:3:6) type C 1 using 20 mm graded crushed stone aggregate as in fixing hold fast including necessary formwork completed all as specified.
M & L Broken glass coping on top of wall 25 mm layer of cement mortor (1:3) with a rounded or wethered finish and before the mortor has set , glass ( of bottol) or thick glass) broken to approximately 63 mm gauge, shall be firmly embedded at the rate of 10 kg of glass per square meter of rendereed surface , jogged edges of the glass beibg left projecting completed all as specified and directed.
S & F Mild steel work swan neck, angle iron and flate iron including embedding in concrete and srewing etc , including cutting tops to shape as directed , bent to shape drilling holes, notching for wire etc. including all necessary drilling bolting or riveting etc and similar work conformimg to Fe 290 Gde E-165 complete all as specified and directed.
S & F mild steel work screw bolts 16 to 20 mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed and to be fitted with washer and one hexagonal or square nut ext 15 cm and n exc 22.50 cm long completed all as specified and directed.
S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
S & F Conertina coil with punched tape concertina coil 600 mm diameter 10 mtr openable length, haaving 50 Nos round per 6 mtr length over 3/4 mtr height of wall with existing 'Y' shaped angle iron tied with necessary bolt with angle iron and GI staples with existing barbed wire concertina coil of core wire diameter 15 mm and spacing of blade 26 mm completed all as specified manufacture and directed. Note 'Y' shaped angle iron, barbed wire and necesary bolts and GI staple whichn is required for fixing shall be measured and paid under respective items.
M & L for preparationof new plastered wall surface and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge.
M & L for preparation of new steel surface over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Dismantling of fencing wire mesh of any type all as specified and directed
Dismantling posts and struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and directed.
KATARIA CONSTRUCTION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .