MUDUKULATHUR MLA Construction of culvert

Amount

Earth work excavation for foundation in all kinds of soils and sub soils to full depth as directed by the departmental officers except hand rock Inclusive of shoring strutting and balling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15 cm thick well rammed and consolidated in places shown by the departmental officers with initial lead of 10 meters and initial lift of 2 meters including cost of all labour charges etc., complete as per standard specification

Cement concrete 1:4:8 mix (one cement four sand eight metal using 40 mm ISS size hard blue granite metal from approved quarry including cost and conveyance at his own cost including conveyance to the work site and handling charges for the same at both ends including labor charges for mixing laying leveling compacting with all leads and lift with good soft portable water curing and all other incidental charges such as providing form work if necessary shoring. Shuttering Wailing baling out water where ever necessary including filling up voids, air, packets and all other incidental charges etc.. complete complying with standard specification

Centering charges for all RCC works including cost and conveyance of all material sand labour charges etc. complete as per standard specification for plain surface.

Culvert

Retaining wall

Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.

Plain Cement Concrete 1:2:4 Mix (One part cement, two part sand and four part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Finishing the top of flooring with granothatic flooring with cement concrete 1:2:4 (one cement, two sand and four aggregate) using 10 to 12mm stone chips – 25mm tk etc., Complete.

RAMESH KANNAN K (BID ID -1104816)