Work

Excavation of trench 6x6 for laying 40mm dia MS round bar 700mm below the ground level along with shifting of MS round bar from store to work sitr including cutting strengthening etc alongwith backfilling of excavated trench.

Fabrication of 3meter long electrode with 40mm dia MS round bar having 150mm long conicle shape and then its piercing vertically inside the ground with top 700mm below ground level including shifting of MS Round bar from store to switchyard.

Laying of 40mm dia MS round bar, 700mm below ground level including shifting of MS Round Bar from storage place to the switchyard including cutting welding painting etc.

Making of 150mm long lap joint of above laid 40mm dia Round by due cutting straightening welding on both sides and painting with black bitumious paint

Making of cross joint of above laid 40mm dia Round bar 700mm below ground level by due welding at all four corners including providig & welding of suitable size MS angle pierce on opposite corners painting with black bitumious paint

Making of end joint of above laid 40mm dia MS Round with top of vertically pierced MS electrodes 700 below the ground level by due welding

Erection of main and auxiliary structure consisting of columns, beams, peaks, masts etc. and auxiliary structures required for installation of Bays ATM, AXM, YMM, XPM, BBL, BTI, BCT, ALP etc. including shifting of all material i.e. structure parts nuts, bolts washer etc. from store to site of erection, erection of structure as per drawings and practices using flat and spring washer with each bolt. Matching of holes, cutting, matching of member if required shall also be done by the contractor without any extra cost to complete the work satisfactorily. All material to be erected shall be supplied by the UPPTCL free of cost but all men, material and T&P required for satisfactorily completion of work shall be arranged by the contractor at his own cost for safely completion of work in all respect.

145 KV C.B.