REPAIRING OF BHURIYA DRAIN REGULATOR AT KM. 16.550 OF ATTA MARGINAL BUNDH IN DISTT. G.B.NAGAR

Amount

Fabricating and Winch box complete set (shaft, Gear & Pinion by EN9 material+cast steel gears, Housing Plate. Adjusting Spaeer, Rotating hands, Bevel Gear , Bevel Gear Pinion EN 9 material, Spendle (Squre thred) 11/4" Pitch Dubble start(screw)lenth Six meter, Gun Matel Nut dia suitable for Squire throad Screw (Spendle) by E45Matarial, Nut Body Suitable for Gun Matel Nut, Nut Body Housing, Plumbers Block) commissioning oprating system of Gate No.1 other required materials, labour and T&P required for proper completion of work.

Fabricating and Winch box complete set (shaft, Gear & Pinion by EN9 material+cast steel gears, Housing Plate. Adjusting Spaeer, Rotating hands, Bevel Gear , Bevel Gear Pinion EN 9 material, Spendle (Squre thred) 1 1/4" Pitch Dubble start (screw) lenth six meter, Gun Matel Nut dia suitable for Squire throad Screw (Spendle) by E45Matarial, Nut Body Suitable for Gun Matel Nut, Nut Body Housing, Plumbers Block) commissioning oprating system of Gate No.2 other required materials, labour and T&P required for proper completion of work.

Fabricating and decking on super structure by MS chequered plate 6 mm thick after cutting old and damaged Plateform and measuring, marking, cutting by gas, making holes if required in chequered plate to the size as per requirement to site, shifting of chequered plate from ground to super structure platform and welding by diesel generating set, including cost of gas electrodes and other required materials, labour and T&P required for proper completion of work.

Painting of superstructure of gate by applying I coat of red oxide zinc chromate primer and 2 coat of high glass synthetic enamel phiroza blue paint of standard make after proper cleaning, scarping the surface including cost of all material, labour T&P and scaffolding bridges with proper safety arrangement as required for proper completion of work.

Greasing of rollers of gate after cleaning replacing grease nipple stud/cap as including cost of all material, labour, T&P etc required for proper completion of work for a roller.

Replacing broken/ missing, damaged bolts nuts in hydro mechanical equipment and their components after proper checking of bolts, nuts including cost of all material, labour, T&P etc required for proper completion of work for gate.

Replacing of musical note type side rubber seal as per IS code 11855 by removing old damaged side rubber seal from gate, scraping & cleaning surface, making holes feding and clamping the M.S plate by new counters sunk head high tensile bolts, nuts and washer, making adjustment as per requirement of site including cost of all material labour and T&p required for proper completion of work. For size 120 X 12mm note dia 45mm

Replacing of bottom rubber seal as per IS code 11855 by removing old damaged side rubber sea from gate, scraping & cleaning surface, making holes, fixing and clamping the M.S plate by new counters sunk head high tensile bolts, nuts and washer, making adjustment as per requirement of site including cost of all material, labour and T&p required for proper completion of work. For size 80X20 mm

Painting on old rusted steel surface of gates and appurtenances after preparation of surface properly by sand blasting process and applying two coat of Zinc Rich primer and two coat of solvent less epoxy paint including cost of all material, labour T&P and scaffolding required for proper completion of work.

Greasing oiling of component of lifting mechanism of gates (excluding rollers) after proper cleaning with replacing Grease cup/Grease Nipple as required including cost of all material, labour and T&P etc. required proper completion of work.UPIDSOR Chapter-XX sl.no.7a

Providing and fixing of railing i/c all cost of fabrication, painting, labour, material, T&Pand taxes etc. complete.

Finishing with Deluxe Multi surface paint system for exteriors using Primer as per manufacturers specifications including cot of all materail, labour, T&P and scaffolding with safety arrangement required for proper completion of work

PRASHANT MISHRA

SUMESH CHANDRA MISHRA