Repair and Maintenance works to the North side of Power House building A row wall from column A 12b to column A 16

Providing wooden platform with scaffolding arrangement using 10 to 13cm dia Casurina posts and 40mm thick country wood planks for providing platform over the scaffolding including cost of all materials labour, lead, lift etc., complete.

Dismantling of existing RCC and clearing the debris 1 Km away from the site including cost of all labour, lead, lift, T&P etc complete.

Providing RTS reinforcement cutting, bending and tying in position with binding wire including cost of all materials, labour, lead, lift etc., complete

Providing shuttering, centering using steel shutter, rate including cost of all materials, labour, lead, lift etc., complete.

Providing RCC 1:1.5:3 using OP/PP cement with 6 to 10mm metal including cost of all materials, labours, lead, lift, tools, curing etc. complete.

Brick work in CM 1:5 using fly ash bricks (230 x 110 x 70 mm) including cost of all materials, labours, lead, lift, curing, etc. complete.

Plastering with CM 1:5, 12mm thick with Nitobond AR mixed in cement mortar at 250 ml/bag of cement including cost of all materials, labours, lead, lift, curing, etc., complete.

Providing two coats with ready mixed plastic emulsion (exterior walls) of first class quality paint & approved colour over a priming coat including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete

Providing and fixing in position of new anodized sliding aluminium windows of approval manufactures with aluminium 65 x 38 x 2.50mm as main outer frame and inner frame with section 62 x 30 x 1.50mm for top sides and bottom and shutter frame with section 39 x 19 x 1.50mm for vertical plain inter lock and bottom etc. including all fittings / fixture confirming to relevant IS to ensure smooth operation and glazed with 6mm wired glass panels as two sliding windows type (i.e.,) Bottom portion 1.20 mtrheight and top portion 0.60 mtr height, as per instruction of site engineer, rubber beading with standard hardwares such as special wheel, Maruthi lock, 'U' Rubber lining etc., complete.

Providing and fixing steel door of required size with single leaf, frame using 30x30x5mm M.S.angle shutters with 30x20x3mm M.S.angle and flat 4x5mm for door sfiffner center portion 20x5mm for shutter stiffner horizontal and 16x5mm for door stiffner outer vertical and horizontal with 2mm thick M.S.Sheet both sides made with 2 no tower bolt, 1 no aldrop, 2 no handles, 3 nos hinges with cost of all materials lead lift etc., complete including two coats of approved quantity enamel paint over the priming coat of red oxide.

UDAYAPPA ENTERPRISES