Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹37.1 L+₹2.1 L (6.07%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹41.5 L+₹6.5 L (18.6%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹41.5 L+₹6.5 L (18.7%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | Rejected-Technical | - | Rejected-Technical NOT ELIGIBLE DUE TO ORIGINAL PHYSICAL DD NOT RECEIVED FROM CONTRACTOR, AS PER MENTIONED IN NIT CLAUSE AT APPX A PARA 7 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
11 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 869 EWS
GE 869 EWS C/o 99 APO Pin-913869
ADDN/ALTN TO BLDG NO T-932, T-933 AND T-934 AND CERTAIN MINOR WORKS AT LEIMAKHONG MIL STN
2022_MES_539137_4
8425/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG MIL STN
AS PER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹70,000
Yes
29 Apr 2023
20 Jan 2023
13 Feb 2023
20 Jan 2023
11 Feb 2023
28 Jan 2023
Amount
Schedule 'A'
Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Excavating over areas, n exc 1.5 m deep and getting out of hard/dense soil complete all as specified and as directed.
Ditto all as per item no 02 above but for each additional 1.5 mtr or part thereof in depth beyond the first 1.5 m depth complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and getting out in soft/loose soil complete all as specified and directed.
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
M & L for PCC grade (Nominal mix) using 1:4:8 Type D2 using (40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L for PCC 1:3:6 Type C2 (Nominal mix) using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete, haunching and benching of hume pipes and the like etc complete all as specified and directed.
M&L for 50mm thick PCC 1:4:8 Type D2 grade (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.
M & L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M & L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and pigment complete all as specified and directed.
M & L for PCC 1:2:4 Type B1 (Nominal mix) using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.
M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.
Material and labour for brick work with sub class “B’ bricks in one brick thick in honey comb walling in cement mortar (1:4) complete all as specified and directed.
M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.
M & L for rendering 15mm thick plaster in cement mortar (1:6) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)
M&L rendering 15mm thick on other than fair faces of brick work in cement mortar(1:4) using water proofing compound @2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified. (Note: Plastering shall be carried out using Dimapur Sand. Note: WPC will be measured and paid separately)
Supply of Integral water proofing Compound ISI marked complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.
M & L for PCC 1:2:4 Type B1 (Nominal mix) (using 20mm graded crushed stone aggregate) as in coping complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 Type D2 grade (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 Type C2 (Nominal mix) (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.
M&L Joint free coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match shade including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
M&L coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match shade including 15mm thick screed bed or bedding layer in cement mortar (1:6)complete all as specified and directed.
M&L coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match shade including 15mm thick screed bed or bedding layer in cement mortar (1:6)complete all as specified and directed.
S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in cement mortar (1:4) complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 Type C2 (using 40mm graded crushed stone aggregate ) as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed.(Using Dimapur Sand)
M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.
M&L for preparation of old plastered surface of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.
M&L for preparation of old plastered surfaces of walls and applying two coats of cement base paint over a coat of whitewash complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and applying three coats of white wash complete all as specified and directed.
M&L for two coats of Painting floors with ready mixed paint, for use on floors complete (including preparatory work) all as specified and directed by Engr-in-Charge.
M&L for prepraration of new or untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Dismantling of galvanised plain/ corrugated including Nainital or similar pattern mild steel sheeting of any gauge, thickness roof coverings and segregating serviceable sheet and stacking for reuse and removing unserviceable materials from site of work complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws. complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coated GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S & F for Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc.complete all as specified and as directed.
S&F 0.63mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washer in roof, wall etc. with grade of zinc coating 275 complete all as specified and directed.
S&F Structural steel work in Rolled sections as in main and cross beams, hip and jack rafters; crane , gantries , rails , purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed.
M&L for MS works as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 290 (Grade E-165) quality-A complete all as specified and as directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240.complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.
M&L for RCC 1:2:4 Type B1 (nominal mix) using 20 mm graded crushed stone aggregate as in beams, lintels and the like over 1.5m span complete all as specified and directed.(using dimapur sand)
M & L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finised surface of concrete complete all as specified and directed
M & L for RCC 1:2:4 Type B1 (nominal mix) (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; basesfor columns, etc.; basement slabs, under-reamed piles and mass concrete vcomplete all as specified and directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
Material and labour for loose filling with broken brick bats of gauge 80 to 150mm in soakage pit complete all as specified and directed
M & L for precast cement concrete 1:3:6 Type C1 (nominal mix) using 20mm graded stone aggegate set in cement mortar(1:4) in landing, cover slabs (for manholes etc) Chajjas, shelves and simillar articles with plain faces.complete all as specified and directed.
S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S & F mild steel flat iron as in hold fast including screwing or welding complete all as specified and directed
M&L for PCC 1:3:6 Type C1 (Nominal Mix) using 20mm graded crushed stone aggregate as in holdfast incl necessary formwork complete all as specified and directed.
S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.
Supply & Fix for 25mm thick factory made of shutter 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); kiln seasoned and chemically pressure treated complete as sepecified and directed by Engineer-in-Charge.
S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F 100mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150mm long Aluminium handles, cast type, anodised complete all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.
S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like and all necessary' labours; articles n exc 200 cu. cm each complete all as specified and directed
M&L for 1:3:6 Type C2 (Nominal Mix) using 40mm graded crushed stone aggregate as in surface channel and drains complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
S&F Vitreous China urinals, half stall, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe complete all as specified and directed.
M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width or aperture 1.40mm complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in rain water pipe complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed.
S & F wash basin, vitreous china (flat back or angle back type), white, 550 x 440 mm size, white, including brackets, waste fittings, CP waste coupling,pillar tap & 32mm dia, waste pipe, complete all as specified and directed.
M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
S&F 150mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed.
Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
Taking up or down 20mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with 140mm overall length of cover plate complete all as specified and directed.
S&F factory made UPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of UPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, including stainless steel wire mesh, 4mm to 5mm thick tintted glass and aluminium anodized grill of design DG 104 pattern complete all as specified and directed by Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
S & F vitreous china wash down water closet pan (pedestal pattern) white with plastic seat, closed pattern with flat bottom and with ‘P’ or ‘S’ trap (excluding flushing cistern and flush pipe) including all fitting complete all as specified and as directed.
S&F PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers all as specified and directed.
S & F in repairs vitreous china wash down water closet pan (pedestal pattern) white with integral foot rest with ‘P’ or ‘S’ trap (including flushing cistern and flush pipe) including all fitting complete all as specified and as directed.
S&F in repair vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (including flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.
S&F 32mm dia Waste coupling of PTMT (half or full threaded)suitable for urinals complete all as specifed and directed. (Minimum weight 45gms)
S&F in Gun-metal (ISI marked), globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15mm bore and fixed complete all as specified and directed.
S & F 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank 500 litres capacity of multilayered layer wall construction ISI Marked (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed.
S&F towel Rail 20mm dia 600mm long of brass chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S&F chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe of 15 mm dia or brass ferrule and fixed.
Dismantling water tanks capacity exc. 500 litres and n.exc. 1000 liters and removing to store complete all as specified and directed.
S&F in repairs stop valves(ISI marked) cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) for 15mm bore pipe complete all as specified and directed.
S&F in repairs chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
M & L for concrete bed to drain pipes 100/110 mm including packing under ,and haunching against the sides of pipes after they are laid and tested in cement concrete( 1:3:6) type C2 including necessary form work complete all as specified and directed.
M & L PCC (1:3:6) type C2 using 40mm graded broken stone aggregate as in concrete bed to drain pipes of 160/150 mm bore including packing under and completely surrounding the pipes with concrete after laying and testing of the pipes including necessary form work complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
M&L for PVC (SWR) 110mm dia couplers complete all as specified and directed.
M&L for PVC (SWR) 75mm dia couplers complete all as specified and directed.
M&L for PVC (SWR) vent cowl of dia 75mm complete all as specified and directed.
S&F 110mm bore PVC (SWR) reducers complete all as specified and directed.
M&L for RCC 1:2:4 Type B0 (Nominal mix) using 12.5mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished surface of concrete complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing unserviceable materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.
Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) (a) One light point controlled by one, one way switch
(b) One ceiling /exhaust fan point controlled by one, one way switch
(c) One socket outlet 5 Amps 5 pin on independent board
(d) One socket outlet 5 amps 5 pin on same board
All as per item No. 115 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed.
S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.
S&F modular socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed.
S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.
S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.
S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed.
S&F modular white cover with frame for fixing of 12 module complete all as specified and directed.
S&F modular white cover with frame for fixing of 8 module complete all as specified and directed.
S&F modular white cover with frame for fixing of 6 module complete all as specified and directed.
S&F modular white cover with frame for fixing of 3 module complete all as specified and directed.
S&F modular white cover with frame for fixing of 4 module complete all as specified and directed.
S&F modular white cover with frame for fixing of 2 module complete all as specified and directed.
S&F blank speacer plate for single module complete all as specified and directed.
S & F Modular step type two module electronic fan regulator heavy duty 120 watts 240 volts complete all as specified and directed
Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F MCB single pole 06 to 32Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed.
S & F in repair LED lights fittings 1 X 20 Watt , 220 V , AC decorative box type with driver , holder including LED tube light connecting up three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed
S & F LED lights fittings 1 X 20 Watt , 220 V , AC decorative box type with driver , holder including LED tube light connecting up three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed
Taking down old unservicebale service cable from and including battens /suspending wires complete all as specified and directed
S&F of 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheating of PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than one meter apart including 4 mm suspension wire one twin core cable 2 core flat of 10 sqmm size complete all as specified and directed
Taking down carefully Ceiling/Exhaust fan from its original position and refixing / hanging after plaster work complete all as specified and directed.
Hanging only/ Refixing ceiling/exhaust fan removed item Srl No 142.00 above and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed.
Supply & fix in repair exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, Copper winding of sweep 300mmm and necessary fitting complete all as specified and directed.
Supply & fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, Copper winding of sweep 300mmm and necessary fitting complete all as specified and directed.
S & F electric water heater , storage type steel body with copper inner tank and heating element upto 2KW capacity 25 ltr, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV , connection piece etC complete all as specified and directed.
M&L drilling and tapping cast iron water mains (in position) for branch connections of internal dia 15 mm. complete all as specified and directed
S&F stop valves 15mm cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed.
M & L Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion complete all as specified and as directed.
SHARMA ENTERPRISE
M/s Ritz Marketing
APPLE CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .