Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.7 CrAccepted-AOC | ₹4.7 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹4.7 CrRejected-Finance | ₹4.7 Cr | L2 | Rejected-Finance The quoted price bid is higher than the other bidder. |
| 3 | Rejected-Technical | - | - | Rejected-Technical 1. In the form of FD or STDR only on form any commercialised bank Clause 16.2 of ITB and Appendix to ITB, EMD Validity not given 2. Clause 4.4 a of ITB and Clause 1.3.1 of Section 3 3. Clause 1.5 of Section 3 and Clause 4.4 B b ii of ITB |
| 4 | Rejected-Technical | - | - | Rejected-Technical 1. In the form of FD STDR only on form any commercialised bank Clause 16.2 of ITB andAppendix to ITB EMD Validity not given 2. Clause 4.2 b and 4.6 of ITB 3. Clause 4.4 a of ITB and Clause 1.3.1 of Section 3 4. Clause 1.5 of Section 3 etc. |
| 5 | Rejected-Technical | - | - | Rejected-Technical 1. Should be in the form of Demand Draft Clause 8.2 of ITB 2. Clause 4.4 a of ITB and Clause 1.3.1 of Section 3 3. Clause 1.4 of Section 3 |
Tender Value
₹4.9 Cr
EMD Value
₹9.8 L
Closing Date
6 Jul 2020, 4:00 pmClosed
Chief Engineer,PMGSY
Chief Engineer,PMGSY (ARRDA) RWD, Itanagar, C.Sector(A.P)
BT, GSB,WBM, PMC and pucca drain etc
2020_CEAR_95048_1
AR0603264848
Open Tender
Civil Works - Roads
365 days
Lumri, Ziro-II
As specified in SBD
9 documents required · 9 mandatory
₹15,000
Chief Executive Officer, ARRDA
₹9.8 L
Yes
O/o the Executive Engineer,RWD,Ziro
2 Sept 2020
22 Jun 2020
7 Jul 2020
22 Jun 2020
6 Jul 2020
24 Jun 2020
27 Jun 2020
Amount
Earthwork for Regradient
Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1
Excavation in hilly area in ordinary rock not requiring blasting by mechanical means including cutting and trimming of slopes and disposal of cut material with a lift upto 1.5 m and lead upto 20 m as per Clause 1603.2.
Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5
Compacting original ground supporting subgrade
Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2.
Shoulder & Subgrade preparation
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.
GSB LAYER (200 mm thick)
Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (i)For Grading I Material
WBM 3 FOR BASE COURSE ( 75 mm thick)
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.By Manual means
Prime Coat
Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 1.2-1.5 kg/sqm using mechanical means as per Technical Specification Clause 502. High Porosity
Tack Coat
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.30 to 0.35 kg per sqm on the prepared non-bituminous surfaces (cement concrete pavement) cleaned with Hydraulic broom as per Technical Specification Clause 503.
PMC (20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen Binder)
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. By Manual Means, Bitumen (S-90)
SEAL COAT
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510. By Manual Means ,T ype A , Bitumen (S-90)
Item : Slab Culvert 1.50 mtr. span (As per IRC SP-20-2002) [Costing at "0" km lead]
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.Ordinary soil Upto 3 m depth
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I. P.C.C grade M 10 Nominal mix 1:3.6
Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 Coursed Rubble masonry ( 2nd sort ) In 1:4 cement mortar
Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 Coursed Rubble masonry ( 2nd sort ) In 1:5 cement mortar
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 With Sandy material
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5. For design mix RCC M 20
Providing PCC M-20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and technical specification Clauses 615, 710 and 1204.3.11
Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202
Fillling in foundation trenches as per drawing and technical specification Clause 305.3.9 (1)Sand filling
Item : Retaining wall - 2.00 mtr high ( As per IRC SP-20-1979) [ Cost at "0" lead]
Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.
Providing concrete for plain/renforced concrete in open foundations complete as per drawing and technical specification clouse 802, 803, 1202 & 1204. I. PCC Grade M10 (ii) Normal mixed 1:3:6 (hand mixing)
Stone masonary in cement mortar for sub structure as per technical drawing and specification clause 702,704,1202 & 1204 II.(iii) In cement mortar 1:4
Providing & Laying of Dry rubble flooring complete as per drawing and technical specification, clouse 1303.3
Back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, clouse 1204.3.8
i. Granular material
Item : Gabion Structure for Breast wall - 2.00 mtr high ( As per IRC SP-20-1979) [ Cost at "0" lead]
Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.
Providing and laying wire created boulder structures boulder size 22.5 cm to 45 cm having 25 kg average weight for each i/c dumping/laying in S.W.G. Wire mesh of 10 cm x 10 cm (woven diagonally) 4mm dia i/c packing with small size stone spalls and carrying of boulders from a lead of 50 mtr and lift up to 1.5 mtr i/c lying properly the mesh by cutting the mouth and hoisting of wire where felt necessary as per direction of Engineer-inCharge technical specifications Clause 1301. ( Based on SDB Rural Road Chapter-14, Item No.14.2)
Trapezoidal Shaped Side Drain ( As per IRC SP-48-1998 Hill Road Manual )
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of side
PUCCA DRAIN
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of side
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 a) Nominal mix 1:3:6
Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. (I) Random Rubble masonry (i) In 1:3 cement mortar
Cement Plaster 15 mm thick 1:4 on stone masonry
Kilometre Stone
i)5th Kilometre Stone (precast)
ii)Ordinary Kilometer Stone (Precast)
iii)200 m stone (precast)
Providing and Fixing 'Logo' of PMGSY Project
Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
Providing and fixing of typical PMGSY Citizen information sign board as per MORD specifications and drawing of cast-in-situ RCC,(Size of RCC post 25cmx25cmx90cm below G.L. & 15cmx15cmx245cm above G.L.),(Size of board 2x 90cmx80cmx7.5cm, ) incl.earth work, finishing with 15mm pluster 1:4 and neat cement punning, applying priming coat, painting and lettering with appropiate colour with required shade of approved quality ready mix paint.
Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801
Provision and fixing of traffic signs for limited period at suitable locations in construction zone comprising of warning zone,approch transition zone,working zone and terminal transition zone with a minimum distance of 2-3 from the edge of the carriage w
a. Men at work.
b. Do not enter.
c. Stop.
d. Speed limit
e. Road closed
f. Traffic sign ahead
Routine Maintenance
First Year
Second Year
Third Year
Fourth Year
Fifth Year
Add GST @ 12%
M/S H.B ENTERPRISES
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid