EXTRA CONSTRUCTION WORK IN CENTER OF EXCELLENCE BUILDING AT- RESHAM NIDESHALAY , LUCKNOW UTTAR PRADESH

Civil Work

Dismantling of Gypsum False ceiling Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposa of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar

Providing and laying vitrified floor tiles of size 600×1200 mm of approved make such as Kajaria, Somany, or equivalent, having water absorption below 0.08% and conforming to IS:15622, in approved shades and colours. The tiles shall be laid over a 20 mm thick cement mortar bed mixed in the ratio of 1:4 (1 part cement : 4 parts coarse sand), with grey cement slurry applied at the rate of 3.3 kg per sqm to ensure proper bonding. All tiles shall be installed using 4–5 mm spacers to maintain uniform joint spacing, and the joints shall be filled with approved epoxy grout of the required shade to achieve a seamless and durable finish. White cement mixed with matching pigments shall be used wherever necessary for colour consistency. The entire work shall be executed with accurate alignment, level, slope, and finish, including all necessary cutting, trimming, cleaning, and curing, strictly as per the manufacturer’s guidelines and the instructions of the Architect/Engineer-in-Charge, complete in all respects.

Providing and laying vitrified floor tiles of size 600×1200 mm of approved make such as Kajaria, Somany, or equivalent, having water absorption below 0.08% and conforming to IS:15622, in approved shades and colours. The tiles shall be laid over a 20 mm thick cement mortar bed mixed in the ratio of 1:4 (1 part cement : 4 parts coarse sand), with grey cement slurry applied at the rate of 3.3 kg per sqm to ensure proper bonding. All tiles shall be installed using 4–5 mm spacers to maintain uniform joint spacing, and the joints shall be filled with approved epoxy grout of the required shade to achieve a seamless and durable finish. White cement mixed with matching pigments shall be used wherever necessary for colour consistency. The entire work shall be executed with accurate alignment, level, slope, and finish, including all necessary cutting, trimming, cleaning, and curing, strictly as per the manufacturer’s guidelines and the instructions of the Architect/Engineer-in-Charge, complete in all respects.

Providing and fixing in position factory made non asbestos fibre reinforced aerated cement sandwich wall/roof/floor light weight solid core panels made of light weight cement concrete core composed of OPC cement, pulverized flyash, quick lime, cotton pulp & Gypsum in mortar state mixed with aeration agent in a preset mould. The outer face on both sides of the panels will be non asbestos fibre cement board Type B , cate - III confirming to IS 14862:2000. These solid wall panels are installed using Galvanized iron steel tracks/C channel of 1mm thick of required sizes as recommended by manufacturer's and fixed to floor and RCC soffit in plumb to each other with steel screw/fasteners. The panel shall be fixed vertically with tongue & groove joint with cement based polymer modified jointing compound. The exposed surface finished with fibre mesh/glass fibre tape with polymer based jointing compound having superior flexibility. Panels should be used as floor & roofing with additional structural support, steel or RCC depending upon the design. All the operation shall be completed in all respect as per drawings, Manufacturers specifications and under the overall direction of Engineer-in-Charge (Cost of all the material is included except tracks/C channel" which will be paid separately)"

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing stainless steel handles with screws etc. complete for 600mm long(Make : Ozone/Saint Gobain/Emerald)

Providing and fixing Ozone make lock for toughened glass including cost of material labour etc complete.(Make : Ozone/Saint Gobain/Emerald)

Interior Work