1. TOURIST DEVELOPMENT OF VISHWAMITRA PLACE, VISAUL, LOCATED IN HARLAKHI BLOCK UNDER MADHUBANI DISTRICT.

BIHAR STATE TOURISM DEVELOPMENT CORPORATION LIMITED

Technical Sheet

Name of Work TOURIST DEVELOPMENT OF VISHWAMITRA PLACE, VISAUL, LOCATED IN HARLAKHI BLOCK UNDER MADHUBANI DISTRICT. Cost of Work as per BOQ(Rs in Lakhs) 1333.70146 Time of Completion in months 12 ALL COLOURED CELL TO BE FILLED ACCORDINGLY

Sactioned Amount 145033000 Date of Sanction 2026-04-08T00:00:00Z Date of Tender 2026-04-24T00:00:00Z

Sl No. Items Requirement Cl. No. Name of the Contractor

Address of the Contractor

1 Registration No.

2 Bid Validity Bids shall remain valid for a period not less than 120 days after the deadline date. A Bid valid for a shorter period shall be rejected by the Employer as non-responsive 120 Days 15.1 Bid validity periods In days

3 Bid Security (A) Online mode i.e. internet payment gateway (credit/ debit card), Net Banking, NEFT/ RTGS 16.1 Amount To be entered (Rs in Lakhs)

(B) Unconditional bank guarantee from any scheduled Indian bank issued within the state in the format given (If issued from any bank outside state will be converted to any bank within the state before executing the agreement. Amount To be entered (Rs in Lakhs)

Bid Security Amount - (Rs. In Lakhs) 23.28 Bid Security Amount - Rs.

4 (i) Legal Status of Bidder. 4.3(a)

(ii) Place of Registration.

(iii) Principal place of Business

(iv) Power of attorney of signatory Bid Attached or Not 4.2(iv)

5 Total value of civil engineering construction work performed in last five years. 1. Annual Financial Turn Over usually not less than 50 % of the estimated annual payments under the contract (Rs in Lakhs) APPENDIX to ITB

2020-21 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.469

2021-22 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.36

2022-23 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.26

2023-24 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.166

2024-25 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.08

6 Work Experience of Similar nature Satisfactory completed atleast one similar work of value not less than 50 % of estimated value of contract (Rs in Lakhs) 4.5 (b) Amount To be entered (Rs in Lakhs)

7 Minimum Quantities of work done as prime contractor in any one year during last five years. Items Unit Total Quantity 4.5 ( c )

Brick Work cum 415.54 Value to be entered in unit cum

Electrical Works Rs. 3870531 Value to be entered in Rs.

PHE Work Rs. 1711770 Value to be entered in Rs.

PCC&RCC cum 1606.01 Value to be entered in unit cum

Steel KG 117801.85 Value to be entered in KG

Flooring Work. (Any Stone, Granite, Kota, Sand Stone etc.) sqm 4105.51 Value to be entered in unit sqm

Boat, Jacket & Ring Rs. 604000 Value to be entered in Rs.

8 Bidding Capacity More than the total Bid value of present work = A*N*3-B=Rs. ____.Where A = Maxm. Value of work executed in any one yr during last 5 yrs. N= Nos of years for completion of works. B=Value of existing commitments & ongoing works to be completed in period (Rs in Lakhs) 4.4

9 (a) Existing commitments and ongoing works Amount To be entered (Rs in Lakhs)

(b) Work for which Bid already submitted Amount To be entered (Rs in Lakhs)

10 Availability of key items of Contractor's Equipment Type of Equipment/Maximum age No. Required Nos. Max. Age Page-17 Nos./ Max. Age

Front end Loader 1 5

Plate Vibrator 2 5

Niddle Vibrator 2 5

Water tankar 2 5

Steel shuttering 2500sft 5 to 7

Concrete Mixture 1 5

11 Key Personnel Personnel/Qualification/Contract Package Size (Rs. 10 to 30 Crore) Page-18 Name of the Personnel and Experince in years

Project Manager/ B.E. Civil + 10 Years Exp. (5 years as Manager) or retired E.E. 1 No.

Site Engineer/ B.E. Civil + 07 Years Exp. (3 years in Building Construction) or retired A.E. 1 No.

Plant Engineer/ B.E. Civil + 05 Years Exp. or Dip. Electrical + 07 Years Exp. or Retired J.E. 1 No.

Site Supervisor/ Fresh Graduate in Civil or Diploma Civil + 03 Years Exp. or retired I.T.I Holder. 2 Nos.

12 Evidence of accesses to Financial Resources Evidence of access to or availability of creadit facilities (10% of estimated cost), certified by bankers (Not more than 3 months old). (Rs in Lakhs). 4.2(i) Amount To be entered (Rs in Lakhs)

13 Proposed methodology and programme of construction. Justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per milestones. (Attached or not) 4.3(l)

14 Litigation History Information regarding any litigation, current or during the last five years, in which the Bidder is involved, the parties concerned, and disputed amount. (Attached or not) 4.3(j)

15 Affidavit Regarding statements made in the required attachments are true and correct. Page-24

16 Undertaking Able to invest a minimum of cost upto 25% of contract value of work. During implementation of contract. (Rs in Lakhs). 4.2(ii)

17 NOC for Debar (Affidavit)

BIHAR STATE TOURISM DEVELOPMENT CORPORATION LTD.

(A GOVERNMENT OF BIHAR UNDERTAKING)

TOURIST DEVELOPMENT OF VISHWAMITRA PLACE, VISAUL, LOCATED IN HARLAKHI BLOCK UNDER MADHUBANI DISTRICT.

QUOTING SHEET FOR BIDDERS

Name of Contractor

Address of Contractor

E-mail ID of Contractor Mobile Number

NIT - 03/E-TENDER/ BSTDC/SBD/2026-27 (GR 01)

Sl No. Description Estimated Amount Rate Quoted by Contractor

% Above/Below TOTAL QUOTED AMOUNT Rs.(In Figure) TOTAL QUOTED AMOUNT Rs.(In Words)

1 Total Schedule Amount (Rs.) 121337984

2 Total Non-Schedule Amount (Rs.) To be Quoted !

TOTAL AMOUNT Rs. 133370143

BILL OF QUANTITY FOR TOURIST DEVELOPMENT OF VISHWAMITRA PLACE, VISAUL, LOCATED IN HARLAKHI BLOCK UNDER MADHUBANI DISTRICT.

BASED ON S.O.R. B.C.D.GOVT. OF BIHAR EFFECTIVE FROM 01/01/2022/MR

SL.NO DESCRIPTION UNIT QTY. RATE AMOUNT

(IN DIGIT) (IN WORD)

1 2.29 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

2.29.1 All kinds of soil. 100sqm 51.64781914156448 1355.4 Rupees One Thousand Three Hundred FiftyFive Paise Fourty Only 70003.45406447651

2 2.2 Earth work in rough excavation , banking excavated earth in layer not exceeding 20 cm in depth , breaking clods watering , rolling each layer with 1/2 tonne roller or wooden or steel rammers and rolling every 3rd and topmost layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks , marginal banks and guide banks or filling up ground depressions. lead upto 50 m and lift upto 1.5 m.

2.2.1 All Kinds of soil Cum 7488 386.6 Rupees Three Hundred EightySix Paise Sixty Only 2894860.8000000003

3 20.3 Boring, Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :

20.3.2 400 mm dia piles metre 48.599999999999994 2691 Rupees Two Thousand Six Hundred NinetyOne Only 130782.59999999999

4 2.6 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. 0

2.6.1 All kinds of soil Cum 4154.211249999999 314.9 Rupees Three Hundred Fourteen Paise Ninety Only 1308161.1226249996

5 2.8 Earth work in excavation in foundtion trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. 0

2.8.1 All kinds of soil Cum 677.92925 360.7 Rupees Three Hundred Sixty Paise Seventy Only 244529.080475

6 2.27 Extra for every additional lift of 1.5 m or part thereof in. 0

2.27.1 All kinds of soil Cum 808.858 49.4 Rupees FourtyNine Paise Fourty Only 39957.585199999994

7 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead. Cum 3908.8794224999997 123.9 Rupees One Hundred TwentyThree Paise Ninety Only 484310.16044775

8 2.28 Supplying and Filling in plinth with local sand and under floors including watering, ramming consolidating and dressing complete. cum 7583.639251131829 287.3 Rupees Two Hundred EightySeven Paise Thirty Only 2178779.5568501744

9 2.35 Supplying chemical emulsion in sealed containers including delivery as specified. 0

2.35.1 Chlorpyriphos/Lindone emulsifiable concentrate of 20% litre 562.5832337833518 200.9 Rupees Two Hundred Paise Ninety Only 113022.97166707538

10 2.37 Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL antitermites treatrnent(including the cost of chemical emulsion) 0

2.37.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.55 litres per linear metre including drilling and plugging holes etc. 0

2.37.2.1 With chlorpyriphos E.C. 20% with 1% concentration metre 376.8 49.1 Rupees FourtyNine Paise Ten Only 18500.88

11 2.37.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm diameter holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor. 0

2.37.3.1 With Chlorpyriphos EC 20% with 1% concentration sqm 762.6813796060944 241.2 Rupees Two Hundred FourtyOne Paise Twenty Only 183958.74876098995

12 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level: 0

4.1.3 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) cum 17.20502525 3998.1 Rupees Three Thousand Nine Hundred NinetyEight Paise Ten Only 68787.41145202499

4.1.4 1:2:4 (1 Cement: 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) cum 294.84000000000003 3879.4 Rupees Three Thousand Eight Hundred SeventyNine Paise Fourty Only 1143802.296

4.1.5 1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) cum 57.580817960609444 3434 Rupees Three Thousand Four Hundred ThirtyFour Only 197732.52887673283

4.1.8 1.4.8 (1 Cement :4 coarse sand :8 graded stone agregate 40 mm nominal size) cum 103.6699 2975.2 Rupees Two Thousand Nine Hundred SeventyFive Paise Twenty Only 308438.68648

13 4.3 Centering and shuttering including strutting, proping etc. and removal of form work for: 0

4.3.1 Foundations, footings, bases for columns sqm 316.76658000000003 211.1 Rupees Two Hundred Eleven Paise Ten Only 66869.425038

14 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. up to floor five level, excluding the cost of centering, shuttering and finishing: 0

4.2.6 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) cum 0.33810000000000007 4410 Rupees Four Thousand Four Hundred Ten Only 1491.0210000000002

15 4.4 Providing and Laying cement concreate in kerbs, steps and the like ator near ground level excluding the cost of centring, shuttering and finishing.

4.4.2 1:3:6 (1 Cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size) Cum. 768.75 3434 Rupees Three Thousand Four Hundred ThirtyFour Only 2639887.5

16 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). Sqm 153.637 245.6 Rupees Two Hundred FourtyFive Paise Sixty Only 37733.2472

17 4.12 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). per 50 kg cement 49.16384000000001 57.16 Rupees FiftySeven Paise Sixteen Only 2810.2050944000002

18 4.13 Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg. per square metre on damp oroof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Sqm 68.02199999999999 143.7 Rupees One Hundred FourtyThree Paise Seventy Only 9774.761399999998

19 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6(1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) over 75mm bed dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. sqm 219.51825000000002 436.6 Rupees Four Hundred ThirtySix Paise Sixty Only 95841.66795000002

20 SOR 5.3. Reinforced cement concrete work in beams,suspended floors roofs,having slope upto 15, landing,balconies, shelves,chajjas,lintal,bends,plain window sills stair case,and spiral staircases up to floor five level excluding the cost of centering,shuttering,finishing and reinforcement with 1:2:4 Cum 1.16 5335.9 Rupees Five Thousand Three Hundred ThirtyFive Paise Ninety Only 6189.643999999999

21 5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 0

a) 5.33.1 All works up to plinth level 0

5.33.1.1 Concrete of M-25 grade with minimum cement content of 330 kg/cum cum 1313.647603055 5063.4 Rupees Five Thousand SixtyThree Paise Fourty Only 6651523.273308687

b) 5.33.2 All work above Plinth level upto floor V Level. 0

5.33.2.1 Concrete of M-25 grade with minimum cement content of 330 kg/cum cum 375.17188096499996 5863.2 Rupees Five Thousand Eight Hundred SixtyThree Paise Twenty Only 2199707.7724739877

22 5.33A Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete 0

5.33A.1 All work up to plinth level cum 136.73266999999998 4756.9 Rupees Four Thousand Seven Hundred FiftySix Paise Ninety Only 650423.6379229999

5.33A.2 All works above plinth level upto floor V level 0

5.33A.2.1 Walls columns, pillars, posts cind struts cum 26.671750000000003 5293.5 Rupees Five Thousand Two Hundred NinetyThree Paise Fifty Only 141186.908625

5.33A.2.2 Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. cum 116.25597669921875 5677.2 Rupees Five Thousand Six Hundred SeventySeven Paise Twenty Only 660008.4309168047

23 5.33B Add or deduct for providing richer or leaner mixes respectively at all floor levels. 0

5.33B.1 Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. cum 279.6603966992187 164.5 Rupees One Hundred SixtyFour Paise Fifty Only 46004.13525702148

24 5.35 Add for using extra cement in the items of design mix over and above the specified cement content therein. quintal 1512.0298635753747 609.3 Rupees Six Hundred Nine Paise Thirty Only 921279.7958764757

25 5.9 Centering and shuttering including strutting, propping etc. and removal of form for: 0

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 923.9791000000001 211.6 Rupees Two Hundred Eleven Paise Sixty Only 195513.97756000003

5.9.2 Walls (any thickness) including attached pilasters. Butteresses, plinth and string courses etc. Sqm 1369.6336 375.1 Rupees Three Hundred SeventyFive Paise Ten Only 513749.56336

5.9.3 Suspended floors, roofs, landings, balconies and access platform. Sqm 1253.2873644687502 437.5 Rupees Four Hundred ThirtySeven Paise Fifty Only 548313.2219550782

5.9.4 Shelves (Cast in situ) Sqm 11.103299999999999 437.5 Rupees Four Hundred ThirtySeven Paise Fifty Only 4857.693749999999

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 1864.0474000000004 404.7 Rupees Four Hundred Four Paise Seventy Only 754379.9827800001

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 1513.5909445000002 494.4 Rupees Four Hundred NinetyFour Paise Fourty Only 748319.3629608001

5.9.7 Stairs, (excluding landings) except spiral-staircases. Sqm 1615.1061 439.9 Rupees Four Hundred ThirtyNine Paise Ninety Only 710485.1733899999

5.9.9 Arches,domes,vaults upto 6m span sqm 150.647878125 1128.6 Rupees One Thousand One Hundred TwentyEight Paise Sixty Only 170021.195251875

5.9.14 Extra for shuttering in circular work (20% of respective centring and shuttering items) sqm 80.36447849999999 20.2 Rupees Twenty Paise Twenty Only 1623.3624656999998

5.9.15 Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like. Sqm 472.023875 224.2 Rupees Two Hundred TwentyFour Paise Twenty Only 105827.75277499999

5.9.16 Edges of slabs and breaks in floors and walis- 0

5.9.16.1 Under 20 cms wide metre 1308.4796 130.2 Rupees One Hundred Thirty Paise Twenty Only 170364.04391999997

26 5.11 Extra for additional height in centring, shuttering wherever required with adequate bracing, propping etc. including cost of de-shutering and de centring at all levels over a height of 3.5 m ,for every additional height of 1 metre or part thereof (Plan area to be measured) 0

5.11.1 Suspended floors, roots, laning, beams and balconies (Plan area to be measured) Sqm 13.860000000000001 174 Rupees One Hundred SeventyFour Only 2411.6400000000003

27 5.18 Providing, precast cement concrete Jali 1:2:4(1 cement:2 coarse sand:4 stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement:3 fine sand) etc. Complete excluding plastering of the jambs, sills and soffits. 0

5.18.1 50 mm thick sqm 10.241822499999998 1062.7 Rupees One Thousand SixtyTwo Paise Seventy Only 10883.984770749998

28 5.22 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete. 0

5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia Kg 44091.98009023477 94.5 Rupees NinetyFour Paise Fifty Only 4166692.1185271856

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia Kg 59622.05660402821 92.6 Rupees NinetyTwo Paise Sixty Only 5521002.441533011

5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia Kg 67792.07642797247 90.8 Rupees Ninety Paise Eighty Only 6155520.5396599

5.22.7D Thermo-Mechanically Treated bars TMTC-500-16mm dia Kg 20635.70242383331 91.7 Rupees NinetyOne Paise Seventy Only 1892293.9122655147

5.22.7E Thermo-Mechanically Treated bars TMTC-500-20mm dia Kg 30170.24311637695 91.7 Rupees NinetyOne Paise Seventy Only 2766611.2937717666

5.22.7F Thermo-Mechanically Treated bars TMTC-500-25mm dia Kg 13291.635612333985 91.7 Rupees NinetyOne Paise Seventy Only 1218842.9856510265

29 6.1A Brick work with bricks of class designation 100A in foundations and plinth in :

6.1.12/1 Cement mortar 1.:4 (1 cement: 4 coarse sand ) cum 15.641999999999996 5017.9 Rupees Five Thousand Seventeen Paise Ninety Only 78489.99179999997

30 6.1A Brick work with bricks of class designation 100A in foundation and plinth in: 0

6.1.14A Cement mortar 1:6(1 cement:6 coarse sand) cum 72.93080624999999 4819.9 Rupees Four Thousand Eight Hundred Nineteen Paise Ninety Only 351519.19304437493

31 6.1C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : 0

6.1.14C Cement mortar 1:6 (1 cement: 6 coarse sand ) cum 365.03580000000005 4923 Rupees Four Thousand Nine Hundred TwentyThree Only 1797071.2434000003

32 6.3A Extra for Brick work in superstructure above plinth level upto floor V Level cum 48.04918124999999 842.2 Rupees Eight Hundred FourtyTwo Paise Twenty Only 40467.020448749994

33 6.13A Brick work 7cm thick with brick of class designation 100A in cement mortar 1:3(1 cement: 3 coarse sand) in superstructure. sqm 0.9428999999999998 482 Rupees Four Hundred EightyTwo Only 454.47779999999995

34 6.18A Half brick masonry with bricks of class designation 100A in foundations and plinth in : 0

6.18.4A Cement mortar 1:4 (1 cement: 4 coarse send) sqm 96.08458749999998 599.3 Rupees Five Hundred NinetyNine Paise Thirty Only 57583.49328874999

35 6.19A Extra for half Brick masonry in superstructure above pinth level upto floor V level. sqm 13.604725 89.7 Rupees EightyNine Paise Seventy Only 1220.3438325

36 6.3C Extra tor Brick work in superstructure above plinth level upto floor V cum cum 189.17092499999998 842.2 Rupees Eight Hundred FourtyTwo Paise Twenty Only 159319.753035

37 6.21A Extra for providing and placing in position 2 nos. 6mm dia, MS bars at every third course of half brick masonry (with F.P.S bricks) sqm 560.9725875 113.6 Rupees One Hundred Thirteen Paise Sixty Only 63726.48594

38 6.45 Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level. 0

6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) sqm 464.88800000000003 700.8 Rupees Seven Hundred Paise Eighty Only 325793.5104

39 6.48A Providing 150mm wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron concrete (1: 4:8), over one brick designation 100-A flat soling in proper grade and slope at the base, the drain duly plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I metre 270.325 582.5 Rupees Five Hundred EightyTwo Paise Fifty Only 157464.3125

40 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). 0

9.1.2 Sal wood cum 1.56495625 95670.7 Rupees NinetyFive Thousand Six Hundred Seventy Paise Seventy Only 149720.459906875

41 9.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 0

9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm 24.255000000000003 2845.6 Rupees Two Thousand Eight Hundred FourtyFive Paise Sixty Only 69020.028

42 9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 0

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 69.0813 1775.3 Rupees One Thousand Seven Hundred SeventyFive Paise Thirty Only 122640.03189

43 10.6 Supplying and fixing-rolling shuters of approved make.made of required size of M.S.Iaths interlocked together through their intire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arragements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 0

10.6.1 80x1.25mmM.S. Laths with 1.25mm thick top cover. sqm 17.49 2673.7 Rupees Two Thousand Six Hundred SeventyThree Paise Seventy Only 46763.01299999999

44 10.7 Providing and fixing ball bearing for rolling shutters each 22 424.2 Rupees Four Hundred TwentyFour Paise Twenty Only 9332.4

45 10.8.1 Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 sqm and upto 16.80 sqm in area (say average 14 sqm) sqm 17.49 1108.7 Rupees One Thousand One Hundred Eight Paise Seventy Only 19391.163

46 10.15 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 0

10.15.1.1 Profile B,Fixing with adjustable lugs with split end tail to each jamb metre 57.75 405.8 Rupees Four Hundred Five Paise Eighty Only 23434.95

47 26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modulus of elasticity 900 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for Separately). 0

Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 0

26.86.6 Frame size 65 x 125 mm metre 61 1182.9 Rupees One Thousand One Hundred EightyTwo Paise Ninety Only 72156.90000000001

48 26.87 Providing and fixing factory made single extruded WPC {Wood Polymer Composite} solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers {wood powder/ rice husk/wheat husk) and non toxic additives {maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N {Face) & 900N (Edge), minimum compressive strength 50 N/mm, modulus of elasticity 850 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In• Charge. {Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 0

26.87.2 35 mm thick sqm 19.425000000000004 4468.6 Rupees Four Thousand Four Hundred SixtyEight Paise Sixty Only 86802.55500000002

49 26.88 Providing and fixing factory made single extruded WPC {Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers {wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm', modulus of elasticity 850 N/mm' and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk 5.5 screws, all as per direction of Engineer-In- Charge. {Note: stainless steel butt hinges and necessary 5.5 screws shall be paid separately) 0 0

26.88.2 35 mm thick Sqm 1.5750000000000002 4803.1 Rupees Four Thousand Eight Hundred Three Paise Ten Only 7564.8825000000015

50 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (overall area of door shutter to be measured) sqm 91.985 401.4 Rupees Four Hundred One Paise Fourty Only 36922.778999999995

51 9.4 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 0

9.40.1.2 50x20mm metre 192.6 184.6 Rupees One Hundred EightyFour Paise Sixty Only 35553.96

52 9.48 Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete. 0

9.48.2 Fixed to openings / wooden frames with rawl plugs screws etc. Kg 882.96 161.1 Rupees One Hundred SixtyOne Paise Ten Only 142244.856

53 9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) each 234 130.8 Rupees One Hundred Thirty Paise Eighty Only 30607.200000000004

54 9.71 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete: 0

9.71.1 125x64x2.50 mm each 36 93.7 Rupees NinetyThree Paise Seventy Only 3373.2000000000003

55 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. each 70 810.1 Rupees Eight Hundred Ten Paise Ten Only 56707

56 9.96 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 0

9.96.1 300x16 mm Each 49 235.5 Rupees Two Hundred ThirtyFive Paise Fifty Only 11539.5

9.96.2 250x16mm Each 1 210.1 Rupees Two Hundred Ten Paise Ten Only 210.1

57 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 0

9.97.1 300x10 mm Each 140 111.4 Rupees One Hundred Eleven Paise Fourty Only 15596

9.97.4 150x10mm Each 9 71.6 Rupees SeventyOne Paise Sixty Only 644.4

58 9.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 0

9.100.1 125 mm each 142 57.1 Rupees FiftySeven Paise Ten Only 8108.2

9.100.2 100mm Each 7 50.3 Rupees Fifty Paise Thirty Only 352.09999999999997

59 0.000 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 0

9.101.2 Twin rubber stopper each 64 60.8 Rupees Sixty Paise Eighty Only 3891.2

60 9.103 Providing and fixing bright finished brass 100mm mortice latch and lock with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS:1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). Each 1 655.4 Rupees Six Hundred FiftyFive Paise Fourty Only 655.4

61 9.113 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineerincharge. each 21 649.5 Rupees Six Hundred FourtyNine Paise Fifty Only 13639.5

62 9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 0

9.127.1 1.5 mm thick Sqm 135.45 795.6 Rupees Seven Hundred NinetyFive Paise Sixty Only 107764.01999999999

63 9.15 Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC/Aluminium sliding window with necessary screws etc. complete. Each 10 160.8 Rupees One Hundred Sixty Paise Eighty Only 1608

64 9.151 Providing and fixing steel roller for uPVC/Aluminium sliding window with necessary screws etc. complete. Each 20 88.6 Rupees EightyEight Paise Sixty Only 1772

65 9.161 Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - incharge . (Cost of SS ball bearing hinges is excluded). metre 13.3 1791 Rupees One Thousand Seven Hundred NinetyOne Only 23820.300000000003

66 9.162 Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately). Sqm 10.290000000000001 9736.1 Rupees Nine Thousand Seven Hundred ThirtySix Paise Ten Only 100184.46900000001

67 9.164 Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-in- charge. The glass shall be clear, toughened, interlayered, non-wired fire resistant having 11 mm thickness of approved brand with 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 15 min of insulation (EI15) and having a sound reduction of ?37dB and LT of 86%. 0

Glass shall be compliant to class 2(B)2 category of Impact Resistance as per EN 12600. The glass should be manufactured in UL & TUV audited Facility and including UL-EU Certification.The maximum glazing size cannot be more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report for the complete system (Glazed Door or Partition) will be considered valid only if it contains the stamp and signature of the authorized signatory from the glass manufacturer. (Actual glass size is to be measured at site for payments). Sqm 1.0290000000000001 39995.8 Rupees ThirtyNine Thousand Nine Hundred NinetyFive Paise Eighty Only 41155.67820000001

68 9.139 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on backside of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge,all complete. each 4 7061.5 Rupees Seven Thousand SixtyOne Paise Fifty Only 28246

69 9.147B Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. 0

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 0

9.147B.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) Sqm 10.8 6690.7 Rupees Six Thousand Six Hundred Ninety Paise Seventy Only 72259.56

70 9.147D.1 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. 0

Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 0

9.147D.4 Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Sqm 45.42 9083.3 Rupees Nine Thousand EightyThree Paise Thirty Only 412563.486

71 10.37.2 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4mm aperture on both sides Sqm 15.14 656 Rupees Six Hundred FiftySix Only 9931.84

72 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. each 74 165.4 Rupees One Hundred SixtyFive Paise Fourty Only 12239.6

73 10.32 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required. 0

10.32.1 In stringers, treads landings etc. of stair cases including use of required plates wherever required all complete. Kg 150 104 Rupees One Hundred Four Only 15600

10.32.2 In gratings, frames, guard bar, ladders, railings, brackts. gates & similar works. Kg 10917.3 114.6 Rupees One Hundred Fourteen Paise Sixty Only 1251122.5799999998

74 10.35 Providing and fixing carbon steel galvanised ( minimum coating 5 micron ) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve,including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 0

10.35.1 10 x60 mm. each 20 75.1 Rupees SeventyFive Paise Ten Only 1502

10.35.2 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.10 x 80 mm. each 143 80.7 Rupees Eighty Paise Seventy Only 11540.1

75 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). Kg 713.2375000000001 546.8 Rupees Five Hundred FourtySix Paise Eighty Only 389998.265

76 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 0

8.2.2 Granite of any colour and shade 0

8.2.2.1 Area of slab upto 0.50 sqm sqm 8.7933 4242.9 Rupees Four Thousand Two Hundred FourtyTwo Paise Ninety Only 37309.09257

8.2.2.2 Area of slab over 0.50 sqm sqm 3.582 4401.2 Rupees Four Thousand Four Hundred One Paise Twenty Only 15765.098399999999

77 8.4 Extra for fixing marble/granite stone over and above coresponding basic ite, in facia and drops of width upto 150 mm with expoxy resin based (Araldite or equivalent) adhesive including cleaning etc. complete. metre 27.034999999999997 279.4 Rupees Two Hundred SeventyNine Paise Fourty Only 7553.578999999999

78 8.5 Extra for providing opening of required size & shape for wash basins/kitchen sink in kitchen platform. Vanity counters and similar location in marble/stone work including necessary holes for pillar taps etc. including rubing and polishing of cut edges etc. complete. each 18 428.2 Rupees Four Hundred TwentyEight Paise Twenty Only 7707.599999999999

79 8.1 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone finished smooth.aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and

8.10.2 Granite Stone of approved shade sqm 2.52 3542.9 Rupees Three Thousand Five Hundred FourtyTwo Paise Ninety Only 8928.108

80 11.22 Tile work in skirting, risers of steps and dado(upto 2m height) over 12mm thick bed of cement mortar 1:3(1 cement:3 coarse sand) and jointed with grey cement slurry@ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. 0

11.22.1 Marble tiles (polished) Raj nagar 8 mm thick sqm 1.0755 1532.6 Rupees One Thousand Five Hundred ThirtyTwo Paise Sixty Only 1648.3112999999998

81 11.23 Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with: 0

11.23.1 White Marble- 0

11.23.2.1 Rajnagar plain white marble 18mm thick above 0.20 sqm upto 0.50 sqm sqm 1.4339999999999997 1703.4 Rupees One Thousand Seven Hundred Three Paise Fourty Only 2442.6755999999996

82 11.24 Extra for nosing in marble stone for treads sqm 1468.4372 310.6 Rupees Three Hundred Ten Paise Sixty Only 456096.59432000003

83 11.25 Extra for marble stone flooring in treads steps and risers using single length up to 2.00m sqm 1892.9501 369.2 Rupees Three Hundred SixtyNine Paise Twenty Only 698877.17692

84 11.26 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand ) 0

11.26.1 20 to 25 mm thick sqm 272.17150000000004 1252.7 Rupees One Thousand Two Hundred FiftyTwo Paise Seventy Only 340949.23805000004

85 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. sqm 14.984100000000002 1334.9 Rupees One Thousand Three Hundred ThirtyFour Paise Ninety Only 20002.275090000003

86 11.3 40 mm thick fine dressed stone flooring over 20 mm (average) thick base with joint finished fiush:base 1:5 (1 cement: 5 coarse sand )with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.

11.30.1 Red sand stone Sqm 6706.225 849.2 Rupees Eight Hundred FourtyNine Paise Twenty Only 5694926.2700000005

87 11.31 Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab. m 57.599999999999994 82.9 Rupees EightyTwo Paise Ninety Only 4775.04

87 11.32 Extra for Kota stone / sand stone in treads of steps and risers using single up to 1.05 metre.length sqm 28.799999999999997 18.1 Rupees Eighteen Paise Ten Only 521.28

89 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sqm 209.82999999999998 795 Rupees Seven Hundred NinetyFive Only 166814.84999999998

90 11.4 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours except white , Ivory , Grey , Fume , Red , Brown , laid on 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc, complete. sqm 43.785 1414 Rupees One Thousand Four Hundred Fourteen Only 61911.99

91 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. 0

11.41.2 Size of Tile 60x60 cm sqm 215.8194 1638.8 Rupees One Thousand Six Hundred ThirtyEight Paise Eighty Only 353684.83272

92 11.41A Providing and laying Vitrified tiles in floor in different sizes {thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 0

11.41A.1.1 Double charge vitrified tile polished finish of Size of Tile 600 x 600 mm sqm 122.595 1022.7 Rupees One Thousand TwentyTwo Paise Seventy Only 125377.9065

11.41A.1.3 Double charge vitrified tile polished finish of size. Size of Tile 600 x 1200 mm sqm 31.594999999999995 1150.3 Rupees One Thousand One Hundred Fifty Paise Thirty Only 36343.72849999999

11.41A.2.2 Glazed vitrified floor tiles polished finish of size. Size of Tile 600 x 1200 mm sqm 271.92 1356 Rupees One Thousand Three Hundred FiftySix Only 368723.52

11.41A.3.1 Glazed Vitrified tiles Matt/ Antiskid finish of size. Size of Tile 600 x 600 mm sqm 55.199999999999996 1054.3 Rupees One Thousand FiftyFour Paise Thirty Only 58197.35999999999

93 11.41A Providing and laying Vitrified tiles in floor in different sizes {thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 0

11.41A.3 Glazed Vitrified tiles Matt/ Antiskid finish of size 0

11.41A.3.1 Size of Tile 600 x 600 mm sqm 6.613 1054.3 Rupees One Thousand FiftyFour Paise Thirty Only 6972.0859

11.41A.3.2 Size of Tile 600 x 1200 mm sqm 79.99249999999999 1356 Rupees One Thousand Three Hundred FiftySix Only 108469.82999999999

94 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. 0

11.46.2 Size of Tile 600 x 600 mm. sqm 39.477175 1191.8 Rupees One Thousand One Hundred NinetyOne Paise Eighty Only 47048.897165

95 11.55 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 0

11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. sqm 172.0608 2147.7 Rupees Two Thousand One Hundred FourtySeven Paise Seventy Only 369534.98016

96 11.56 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete asper the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 0

11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. sqm 10.139999999999999 3605.2 Rupees Three Thousand Six Hundred Five Paise Twenty Only 36556.727999999996

97 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. sqm 7899.7940025 283.3 Rupees Two Hundred EightyThree Paise Thirty Only 2238011.64090825

98 12.33 Providing and laying brick tiles of class designation 100 over mumty root grouted with cement mortar 1:3 (1 cement:3 coarse sand) mixed with 2% if integral water proofing compound by weight of cement, over a 12 mm layer of cement mortar 1:3 (1 cement:3 fine sand) and finished neat. 0

12.33.1 With F.P. brick tiles Sqm 242.99298046874998 471.1 Rupees Four Hundred SeventyOne Paise Ten Only 114473.99309882813

99 12.38 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement:2 coarse sand:4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3(1 cement::3 coarse sand)as per standard design 0

12.38.1 In 75x75 mm deep chase metre 121.35 66 Rupees SixtySix Only 8009.099999999999

100 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete each 7 189.4 Rupees One Hundred EightyNine Paise Fourty Only 1325.8

12.52 Grading roof for water proofing treatment with 0

12.52.2 Cement concrete 1:2:4(1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cum 12.149649023437501 3932.2 Rupees Three Thousand Nine Hundred ThirtyTwo Paise Twenty Only 47774.84988996094

101 12.55x Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. sqm 391.59749999999997 1101.6 Rupees One Thousand One Hundred One Paise Sixty Only 431383.8059999999

102 12.54X Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join,C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : 0

12.54X.2 GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of GI sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. sqm 52.8 1752.8 Rupees One Thousand Seven Hundred FiftyTwo Paise Eighty Only 92547.84

103 13.11 12mm cement plaster of mix: 0 0

13.11.4 1:6(1 cement: 6 coarse sand) sqm 962.4381500000002 141.5 Rupees One Hundred FourtyOne Paise Fifty Only 136184.99822500002

104 13.12 15 mm cement plaster on rough side of single or half brick wall of mix. 0

13.12.4 1:6(1 cement: 6 coarse sand) sqm 946.88615 162.8 Rupees One Hundred SixtyTwo Paise Eighty Only 154153.06522000002

105 13.13 20mm cement plaster of mix: 0

13.13.2 1: 4(1 cement: 4 coarse sand) sqm 3836.1493265000004 209.9 Rupees Two Hundred Nine Paise Ninety Only 805207.7436323501

13.13.4 1:6(1 cement: 6 course sand) sqm 248.03999999999996 192.1 Rupees One Hundred NinetyTwo Paise Ten Only 47648.48399999999

106 SOR 13.18 15 mm cement plaster 1:3 (1 cement: 3 coarse sand ) finished with a floating coat of neat cement on the rough side of single or half brick wall. Sqm. 31.8 229.3 Rupees Two Hundred TwentyNine Paise Thirty Only 7291.740000000001

107 13.24 6mm cement plaster to ceiling of mix: 0

13.24.1 1:3(1 cement: 3 coarse sand) sqm 412.2327 131.3 Rupees One Hundred ThirtyOne Paise Thirty Only 54126.15351000001

13.24.2 1:4( 1 cement: 4 coarse sand) sqm 632.80934259375 125.6 Rupees One Hundred TwentyFive Paise Sixty Only 79480.853429775

108 13.36 Extra for providing and mixing water proofing material in proportion recommended by the manufacturers:

13.36.4 20 mm cement plaster 1:4(1 cement: 4 sand) sqm 1144.6796000000002 10.1 Rupees Ten Paise Ten Only 11561.263960000002

13.36.6 20 mm cement plaster 1:4(1 cement: 4 sand) sqm 1342.1297264999998 10.1 Rupees Ten Paise Ten Only 13555.510237649998

109 13.40a Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. sqm 1544.1045 127.9 Rupees One Hundred TwentySeven Paise Ninety Only 197490.96555

110 13.45 Finishing walls with textured exterior paint of required shade : 0

13.45.1 New work (Two or more coats applied @ 3.28 ltr/ 10sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm sqm 79.4483715 215.2 Rupees Two Hundred Fifteen Paise Twenty Only 17097.2895468

111 13.46A Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. 0

13.46A.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm). sqm 2099.4276 132.5 Rupees One Hundred ThirtyTwo Paise Fifty Only 278174.157

112 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

13.46.1 New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sqm 1383.465 137 Rupees One Hundred ThirtySeven Only 189534.705

113 5.3 Add for plaster drip course/groove in plastered surface or moulding to R.C.C. projections. metre 87 34.2 Rupees ThirtyFour Paise Twenty Only 2975.4

114 13.92 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: 0

13.92.1 Two or more coats on new work sqm 2174.982 86.4 Rupees EightySix Paise Fourty Only 187918.4448

115 13.80 A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 3897.0711690937505 105.4 Rupees One Hundred Five Paise Fourty Only 410751.30122248136

116 13.77 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . 0

13.77.2 New work (two or more coats ) over and including priming coat with cement primer sqm 779.38434259375 102.3 Rupees One Hundred Two Paise Thirty Only 79731.01824734063

117 13.78 Applying one coat of cement primer of approved brand and manufacture on wall surface: 0

13.78.2 Distemper primer sqm 2174.982 38.7 Rupees ThirtyEight Paise Seventy Only 84171.8034

118 13.81 Applying priming coat: 0

13.81.1 With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) sqm 92.19839999999999 39.7 Rupees ThirtyNine Paise Seventy Only 3660.27648

119 13.93 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

13.93.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Sqm 3501.1475999999993 84.5 Rupees EightyFour Paise Fifty Only 295846.97219999996

120 13.94 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 0

13.94.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture sqm 230.65365 116.5 Rupees One Hundred Sixteen Paise Fifty Only 26871.150225

121 13.101.1 French spirit polishing: Two or more coats on works including a coat of wood filler. sqm 24.255000000000003 215.8 Rupees Two Hundred Fifteen Paise Eighty Only 5234.229000000001

122 13.116 Forming groove of uniform size from 12x12mm and upto 25x15mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. Metre 11 47.1 Rupees FourtySeven Paise Ten Only 518.1

123 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions.(ii) 11 nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand)mixed with water proofing compound in recommended proportion, (iii) Illrd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) Ivth course of 400 micron thick PVC sheet.(Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni). sqm 52.8 480.6 Rupees Four Hundred Eighty Paise Sixty Only 25375.68

124 22.8 Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs, balconies , terraces etc, consisting of following operations. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water -proofing compound cleaning the surface before treatment, (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50 % of cement mortar 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water froofing compound conforming to IS 2545 to reuired slope and treating similary the adjoining walls upto 300 mm height including rounding of junctions, or walls ad slabs. 0

(c) After two days of proper curing applying a secoung coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test, All above operations to be done in order and as directed and specifed by the Engineer-in-Charge. 0

22.8.1 With average thickness of 120 mm and minimum thickness at khurras point to be 65. Sqm 652.04677246875 850.7 Rupees Eight Hundred Fifty Paise Seventy Only 554696.1893391656

125 22.20.1 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5 cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. 3 mm thick. Sqm 162 472.5 Rupees Four Hundred SeventyTwo Paise Fifty Only 76545

126 22.21 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100%polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. Sqm 162 85.2 Rupees EightyFive Paise Twenty Only 13802.4

The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer- in-charge. The product performance shall carry guarantee for 10 years against any leakage. 0

22.23.1 For vertical surface two coats @0.70 kg per sqm Sqm 58.300000000000004 406.2 Rupees Four Hundred Six Paise Twenty Only 23681.460000000003

22.23.2 For horizontal surface one coat @1.10 kg per sqm. Sqm 43.785 311.5 Rupees Three Hundred Eleven Paise Fifty Only 13639.027499999998

127 21.1 Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285, anodised transparent or dyed to required shade according to IS:1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing / panelling, C.P brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): 0

21.1.1 For fixed portion 0

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 88.91999999999999 418.4 Rupees Four Hundred Eighteen Paise Fourty Only 37204.12799999999

21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 0

21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 96.50999999999999 480.2 Rupees Four Hundred Eighty Paise Twenty Only 46344.10199999999

128 21.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 0

21.2.2 Pre-laminated particle board with decorative lamination on both sides Sqm 10 826.9 Rupees Eight Hundred TwentySix Paise Ninety Only 8269

129 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 0

21.3.2 With float glass panes of 5.50 mm thickness(weight not less than 12.50 kg/sqm) sqm 67.287 1115.1 Rupees One Thousand One Hundred Fifteen Paise Ten Only 75031.7337

130 21.8.1 Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width. metre 62.599999999999994 85.2 Rupees EightyFive Paise Twenty Only 5333.5199999999995

131 26A.1 Providing and supplying aluminium extruded tubular and other aluminium sections as per the rchitectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS74,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). kg 693.0899999999999 370.4 Rupees Three Hundred Seventy Paise Fourty Only 256720.53599999996

132 26A.2 a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cumsmoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: 0

b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. 0

c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture,as per the approved sealant design, within and all around the perimeter for holding glass. 0

d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight 0

e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for 0

testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified,as per the approved shop drawings and as directed by the Engineerin-Charge. Sqm 81.53999999999999 3111.4 Rupees Three Thousand One Hundred Eleven Paise Fourty Only 253703.55599999998

133 26A.3 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. 0

(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Sqm 81.53999999999999 3377.5 Rupees Three Thousand Three Hundred SeventySeven Paise Fifty Only 275401.35

134 26A.4 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. Sqm 8.154 3309.1 Rupees Three Thousand Three Hundred Nine Paise Ten Only 26982.4014

135 21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). sqm 2.52 5143 Rupees Five Thousand One Hundred FourtyThree Only 12960.36

136 16.2 Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). Cum 91.80602006688963 11.5 Rupees Eleven Paise Fifty Only 1055.7692307692307

137 16.78 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

16.78.2 With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 Cum 288 1239.4 Rupees One Thousand Two Hundred ThirtyNine Paise Fourty Only 356947.2

138 11.79 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength,thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks,lawns, drive ways or light traffic parking etc. all complete as per manufacturer’sspecifications & direction of Engineer -in-Charge:

11.79.1 (a) 80 mm thick c.c. paver block of M-35 grade with approved colour design and pattern sqm 900 956.4 Rupees Nine Hundred FiftySix Paise Fourty Only 860760

139 16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). Cum 125.8725 7998.8 Rupees Seven Thousand Nine Hundred NinetyEight Paise Eighty Only 1006828.9530000001

A SANITARY INSTALLATION 0

140 SOR. 17.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:

17.1.1 White Vitreous china Orissa pattern W.C pan of size 580 x 440 mm with integral type foot rests. Each 3 4470.9 Rupees Four Thousand Four Hundred Seventy Paise Ninety Only 13412.699999999999

141 17.28 Provding and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete

17.28.2 Flexiable pipe

17.28.2.2 40 mm dia Each 1 104.4 Rupees One Hundred Four Paise Fourty Only 104.4

142 17.71 Provding and fixing PTMT liquid soap container 109 mm wide,125mm high and 112mm distance from wall of standard shape with bracket of same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Each 2 146.3 Rupees One Hundred FourtySix Paise Thirty Only 292.6

143 17.73 Provding and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

17.73.2 600 mm long towel rail with total length of 645mm width78mm and effective height of 88mm,weighing not less than 190 gms. Each 2 424 Rupees Four Hundred TwentyFour Only 848

144 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lif, 10 litre low level white vitreous china flushing cistern & C.P flush bend with fittings & C.I brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 0

17.3.1 W.C pan with ISI marked white solid plastic seat and lid Each 13 5504.3 Rupees Five Thousand Five Hundred Four Paise Thirty Only 71555.90000000001

145 17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions G.I. clamps, complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 0

17.4.2 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern Each 1 5733.3 Rupees Five Thousand Seven Hundred ThirtyThree Paise Thirty Only 5733.3

17.4.3 Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern Each 10 7929 Rupees Seven Thousand Nine Hundred TwentyNine Only 79290

146 8.1 Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth. 0

8.10.1 White Agaria Marble Stone Sqm 10.629999999999999 3061.2 Rupees Three Thousand SixtyOne Paise Twenty Only 32540.555999999993

147 17.31 Provding and fixing 600X450mm beveled edge mirror of superior glass complete with 6mm thick hard board ground fixed to wooden cieats with CP brass screws & washers complete. Each 15 1068.5 Rupees One Thousand SixtyEight Paise Fifty Only 16027.5

148 17.34 Provding and fixing Toilet Paper.holder 0

17.34.2 Vitreous china Each 13 332.9 Rupees Three Hundred ThirtyTwo Paise Ninety Only 4327.7

149 17.71 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. Each 15 146.3 Rupees One Hundred FourtySix Paise Thirty Only 2194.5

150 17.72 Providing and fixing PTMT towel ring trapezodial shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Each 13 204.7 Rupees Two Hundred Four Paise Seventy Only 2661.1

151 17.73 Providing and fixing PTMT towerl rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 0

17.73.1 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170 gms. Each 8 397.3 Rupees Three Hundred NinetySeven Paise Thirty Only 3178.4

B WATER SUPPLY 0

152 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 0

Internal work - Exposed on wall 0

18.7.2 20 mm Nominal outer dia pipes Metre 5 233.9 Rupees Two Hundred ThirtyThree Paise Ninety Only 1169.5

18.7.3 25 mm Nominal outer dia pipes Metre 36 317.3 Rupees Three Hundred Seventeen Paise Thirty Only 11422.800000000001

18.7.4 32 mm Nominal outer dia pipes Metre 65 395.2 Rupees Three Hundred NinetyFive Paise Twenty Only 25688

18.7.5 40 mm Nominal outer dia pipes Metre 46 538.4 Rupees Five Hundred ThirtyEight Paise Fourty Only 24766.399999999998

18.7.6 50 mm Nominal outer dia pipes Metre 114 791 Rupees Seven Hundred NinetyOne Only 90174

153 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 0

Concealed work, including cutting chases and making good the 0

18.8.1 15 mm Nominal outer dia pipes Metre 14 278.2 Rupees Two Hundred SeventyEight Paise Twenty Only 3894.7999999999997

18.8.2 20 mm Nominal outer dia pipes Metre 71 350.8 Rupees Three Hundred Fifty Paise Eighty Only 24906.8

18.8.3 25 mm Nominal outer dia pipes Metre 42 463.1 Rupees Four Hundred SixtyThree Paise Ten Only 19450.2

18.8.4 32 mm Nominal outer dia pipes Metre 26 549.8 Rupees Five Hundred FourtyNine Paise Eighty Only 14294.8

154 0.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 0

External work 0

18.9.4 32 mm nominal outer dia pipes Metre 47 359.1 Rupees Three Hundred FiftyNine Paise Ten Only 16877.7

18.1 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the wall etc. 0

18.10.2 20 mm dia. Nominal bore Metre 7 289.5 Rupees Two Hundred EightyNine Paise Fifty Only 2026.5

18.10.3 25 mm dia. Nominal bore Metre 8 399.9 Rupees Three Hundred NinetyNine Paise Ninety Only 3199.2

18.10.4 32 mm dia. Nominal bore Metre 17 457.8 Rupees Four Hundred FiftySeven Paise Eighty Only 7782.6

155 18.11 Providing & fixing G.I. pipe complete with G.I. fittings and clamps i/c making good the walls etc.concealed pipe including painting with anti corrosive bitumatic paint, cutting chases and making good the wall. 0

18.11.1 15 mm dia. Nominal bore Metre 8 318.9 Rupees Three Hundred Eighteen Paise Ninety Only 2551.2

18.11.2 20 mm dia. Nominal bore Metre 6 374 Rupees Three Hundred SeventyFour Only 2244

156 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 0

18.12.4 32 mm dia. Nominal bore Metre 15 381.7 Rupees Three Hundred EightyOne Paise Seventy Only 5725.5

157 18.13 Making connecting of G.I. distribution branch with G.I. Main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete. 0

18.13.1 25 to 40 mm Nominal bore each 1 446.7 Rupees Four Hundred FourtySix Paise Seventy Only 446.7

158 18.16 Providing and fixing brass stop cock of approved quality 0

18.16.2 20 mm Nominal bore each 4 328 Rupees Three Hundred TwentyEight Only 1312

159 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality. 0

18.17.1 25 mm Nominal bore Each 6 532.3 Rupees Five Hundred ThirtyTwo Paise Thirty Only 3193.7999999999997

18.17.2 32 mm Nominal bore Each. 12 589.9 Rupees Five Hundred EightyNine Paise Ninety Only 7078.799999999999

18.17.3 40 mm Nominal bore Each. 4 707.3 Rupees Seven Hundred Seven Paise Thirty Only 2829.2

18.17.4 50 mm Nominal bore Each. 3 878.2 Rupees Eight Hundred SeventyEight Paise Twenty Only 2634.6000000000004

160 SOR. 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality. 0

18.17.1A 20 mm Nominal bore Each. 1 465.4 Rupees Four Hundred SixtyFive Paise Fourty Only 465.4

161 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end). 0

18.19.2 32mm nominal bore 0

18.19.2.1 Horizontal Each. 1 677.6 Rupees Six Hundred SeventySeven Paise Sixty Only 677.6

18.19.2.2 Vertical Each. 2 777.9 Rupees Seven Hundred SeventySeven Paise Ninety Only 1555.8

18.19.3.2 Vertical Each. 1 777.9 Rupees Seven Hundred SeventySeven Paise Ninety Only 777.9

162 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions. 0

18.21.2 45 cm length 0

18.21.2.1 15 mm Nominal bore Each. 42 85.2 Rupees EightyFive Paise Twenty Only 3578.4

163 18.38 Painting G.I. pipe and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work 0

18.38.2 20 mm dia. Nominal bore Metre 7 13.9 Rupees Thirteen Paise Ninety Only 97.3

18.38.3 25 mm dia. Nominal bore Metre 8 18.4 Rupees Eighteen Paise Fourty Only 147.2

18.38.4 32 mm dia. Nominal bore Metre 17 21.6 Rupees TwentyOne Paise Sixty Only 367.20000000000005

164 18.46 Providing and fixing G.I. union in G.I.pipe including cutting and threading the pipe and making long screws etc. 0

18.46.2 20 mm dia. Nominal bore Each. 5 185.6 Rupees One Hundred EightyFive Paise Sixty Only 928

18.46.3 25mm dia. Nominal bore Each. 7 265.9 Rupees Two Hundred SixtyFive Paise Ninety Only 1861.2999999999997

18.46.4 32 mm dia. Nominal bore Each. 14 306 Rupees Three Hundred Six Only 4284

18.46.5 40 mm dia. Nominal bore Each. 4 419.7 Rupees Four Hundred Nineteen Paise Seventy Only 1678.8

18.46.6 50 mm dia. Nominal bore Each. 3 565.6 Rupees Five Hundred SixtyFive Paise Sixty Only 1696.8000000000002

164 18.48 Providing and placing on terrace(at all floor levels)polythethylene water storage tank ,ISI-12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank litre 3000 9.7 Rupees Nine Paise Seventy Only 29099.999999999996

C.P. BRASS FITTINGS 0

166 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS :8931. 0

18.49.1 15 mm Nominal bore Each 19 434.2 Rupees Four Hundred ThirtyFour Paise Twenty Only 8249.8

167 18.5 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 0

18.50.1 15 mm Nominal bore Each 8 715.1 Rupees Seven Hundred Fifteen Paise Ten Only 5720.8

168 18.53 Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 0

18.53.1 15 mm Nominal bore Each 27 500.4 Rupees Five Hundred Paise Fourty Only 13510.8

169 18.52 Providing and fixing C.P. brass stop cock ( concealed ) of standard design & of approved make conforming to IS 8931. 0

18.52.1 15 mm Nominal bore Each 8 594.8 Rupees Five Hundred NinetyFour Paise Eighty Only 4758.4

170 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 0

18.22.1 100 mm diameter Each 8 166.3 Rupees One Hundred SixtySix Paise Thirty Only 1330.4

171 18.58 Providing and fixing PTMT grating of approved quality and colour. 0

18.58.1 circular type 0

18.58.1.1 100 mm nominal dia, Each 2 33.2 Rupees ThirtyThree Paise Twenty Only 66.4

172 18.58.2 Rectangular type with openable circular lid 0

18.58.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating Each 43 169.7 Rupees One Hundred SixtyNine Paise Seventy Only 7297.099999999999

173 18.33 Constructing masonry Chamber 60 x 60 x 75 cm inside, in brick work in cement mortar 1:4(1 cement: 4 coarse sand) for sluice valve, with C.I surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necesary excavation, foundation concrete 1:5:10( 1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3( 1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: 0

18.33.1 With common burnt clay F.P.S (non modular) bricks of class designation 100 A Each 2 7210.6 Rupees Seven Thousand Two Hundred Ten Paise Sixty Only 14421.2

174 2.1 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m: 0

2.10.1 All kinds of soil 0

2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia Metre 237.6 391.7 Rupees Three Hundred NinetyOne Paise Seventy Only 93067.92

175 19.01 Providing, laying and jointing glazed stoneware pipes class SP-1 'A' with stiff mixture of cement mortar in the proportion of 1:1(1 cement: 1 fine sand) including testing of joints etc. complete. 0

19.1.2 150mm diameter Metre 15.6 464.3 Rupees Four Hundred SixtyFour Paise Thirty Only 7243.08

176 SOR 19.02 Providing and laying cement concrete 1:5:10( 1 cement: 5 coarse sand:10 graded stone aggregate 40mm nominal size) all-round S.W pipes including bed concrete as per standard design.

19.2.2 150mm diameter S.W pipe Metre 15.6 494.4 Rupees Four Hundred NinetyFour Paise Fourty Only 7712.639999999999

177 19.4 Providing and fixing square mouth SW gully trap grade A complete with CI grating brick masonry chamber with water tight CI cover with frame of 300X300mm size(inside) the wt. of cover to be not less than4.50kg. And frame to not less than 2.70 kg. as/standard design 0

19.4.3 180x150mmsize p type 0

19.4.3.1 With F.P.S. bricks designation 7.5 Each 13 1994.1 Rupees One Thousand Nine Hundred NinetyFour Paise Ten Only 25923.3

178 0.0 Providing and laying non -pressure NP2 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc. 0

19.6.2 150 mm dia R.C.C. pipe Metr. 222 410.7 Rupees Four Hundred Ten Paise Seventy Only 91175.4

179 19.7 Constructing brick masonry manhole in cement mortar 1:4(1 cement: 4 coarse sand) R.C.C top slab with 1:2:4 mix (1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand:8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design: 0

19.7.1 Inside size 90x80cm and 45cm deep including C.I cover with frame (light duty) 455x610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) 0

19.7.1.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 Each 17 7914.7 Rupees Seven Thousand Nine Hundred Fourteen Paise Seventy Only 134549.9

180 19.8 Extra for depth for manholes 0

19.8.1 Size 90x80cm 0

19.8.1.1 With F.P.S bricks class designation 75 Metre 1.6 5660 Rupees Five Thousand Six Hundred Sixty Only 9056

181 SOR 19.18 Supplying and fixing C.I cover without frame for manholes:

SOR 19.18.2 500 mm diameter C.I cover (medium duty) the weiht of he cover to be not less than 58 kg. Each 2 3164.6 Rupees Three Thousand One Hundred SixtyFour Paise Sixty Only 6329.2

182 19.3 Constructing brick masonry chamber for underground C.I inspection chamber and bends with 75 class designation bricks in cement mortr 1:4( 1 cement: 4 coarse sand) C.I cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) R.C.C top slab ith 1:2:4 mix ( 1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) foundtion concrete 1:5:10( 1 cement: 5 fine sand:10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: 0

19.30.1 Inside dimensions 455x610mm and 45cm deep for single pipe line: 0

19.30.1.1 With F.P.S bricks Each 25 4266.8 Rupees Four Thousand Two Hundred SixtySix Paise Eighty Only 106670

183 19.31 Extra for depth beyond 45cm of brick masonry chamber: 0

19.31.1 For 455x610mm size 0

19.31.1.1 With F.P.S bricks Metre 2.5 3946.2 Rupees Three Thousand Nine Hundred FourtySix Paise Twenty Only 9865.5

184 SOR 19.32 Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with brick of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 0

19.32.1 With F.P.S. bricks Each 5 33603.4 Rupees ThirtyThree Thousand Six Hundred Three Paise Fourty Only 168017

185 Derived (Septic Tanks) Supplying materials, labour for constructing Septic Tanks of following sizes & as per sections given in the Drawings & Designs, all complete as per specifications and direction of Engineer-in-charge. 0

Septic tank [5.0 mtr (long) x 1.5 mtr (wide) x 2.25 mtr (deep) {of inside finished size as per design & drawings}] Each 2 197517 Rupees One Lakh NinetySeven Thousand Five Hundred Seventeen Only 395034

186 Derived (Harvesting tank & Filtter pit) Rain water harvesting tank (size- 6.0 X 2.0 X 2.1 M. deep + 0.90 M. free board) capacity 25000 LITS. approx & filter pit (size- 1.20 X 0.90 X 1.20 M. deep) Each 1 504566 Rupees Five Lakh Four Thousand Five Hundred SixtySix Only 504566

D TUBE WELL X 1 NOS. 0

187 SOR 24.1 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. 0

24.1.1 All types of soil 0

24.1.1.1 300 mm dia Mtrs. 260 486.8 Rupees Four Hundred EightySix Paise Eighty Only 126568

188 SOR 24.2 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. 0

24.2.1 All types of soil 0

24.2.1.1 300 mm dia Mtrs. 60 567.9 Rupees Five Hundred SixtySeven Paise Ninety Only 34074

189 SOR 24.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 0

24.3.1 100 mm nominal size dia Mtrs. 90 546.1 Rupees Five Hundred FourtySix Paise Ten Only 49149

24.3.2 150 mm nominal size dia Mtrs. 134 660.1 Rupees Six Hundred Sixty Paise Ten Only 88453.40000000001

190 SOR 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 0

24.4.1 100 mm nominal size dia Metre 60 573.1 Rupees Five Hundred SeventyThree Paise Ten Only 34386

24.4.2 150 mm nominal dia metre 12 673.5 Rupees Six Hundred SeventyThree Paise Fifty Only 8082

191 SOR 24.5 Supplying , filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in Recharge Pit,in the required thickness ,for all leads & lifts, . all complete as per direction of Engineer-in-charge cu-m 3.18 1188.9 Rupees One Thousand One Hundred EightyEight Paise Ninety Only 3780.7020000000007

192 SOR 24.6 Supplying , filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the Recharge Pit,over the existing layer boulders in the required thickness ,for all leads & lifts, . all complete as per direction of Engineer-in-charge cu-m 6 1195.6 Rupees One Thousand One Hundred NinetyFive Paise Sixty Only 7173.599999999999

193 SOR 24.7 Supplying , filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm, in the Recharge Pit, in the required thickness over gravel layer ,for all leads & lifts, . all complete as per direction of Engineer-in-charge cu-m 3 1195.6 Rupees One Thousand One Hundred NinetyFive Paise Sixty Only 3586.7999999999997

194 SOR 24.8 Gravels packing in tubewell construction in accordance with IS 4097 including providing graval fine/medium/coarse,in required grading & sizes as per actual requirement,all complete as per direction of Engineer-in charge. cu_m 14.16 1343.2 Rupees One Thousand Three Hundred FourtyThree Paise Twenty Only 19019.712

195 SOR 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Hrs 72 916.8 Rupees Nine Hundred Sixteen Paise Eighty Only 66009.59999999999

196 SOR 24.13 Providing & fixing suitable size threaded mild steel cap or spot welded plate to the top of borewell housing/ casing pipe ,removable as per requirement,all complete for borewell of, 0

24.13.2 150 mm dia each 4 210.7 Rupees Two Hundred Ten Paise Seventy Only 842.8

197 SOR 24.14 Providing & fixing MS clamp of required dia to the top of housing/casing pipe of,removable as pe tubewell as per IS;2800(part-I), including necessary bolts & nuts of required size complete 0

24.14.2 150 mm dia each 4 1531.4 Rupees One Thousand Five Hundred ThirtyOne Paise Fourty Only 6125.6

198 SOR 24.15 Providing & fixing Bail plug/ bottom plug of required dia to the bottom of pipe assembly as per IS;2800(part-I), 0

24.15.1 100mm dia each 2 228.3 Rupees Two Hundred TwentyEight Paise Thirty Only 456.6

24.15.2 150 mm dia each 2 281.8 Rupees Two Hundred EightyOne Paise Eighty Only 563.6

E RAIN WATER PIPE 0

199 SOR 12.78 Providing and fixing on wall face PVC (working pressure 4kgf per sqm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. 0

12.78.2 110 mm diameter Metre 56 257.5 Rupees Two Hundred FiftySeven Paise Fifty Only 14420

200 SOR 12.79 Providing and fixing on wall face PVC moulded fitting / accessories for rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. 0

12.79.1 Coupler 0

12.79.1.2 110 mm Each 13 120 Rupees One Hundred Twenty Only 1560

12.79.2 Single pushfit Coupler: 0

12.79.2.2 110 mm Each 12 374.6 Rupees Three Hundred SeventyFour Paise Sixty Only 4495.200000000001

12.79.3 Single tee with door

12.79.3.2 110 x 110 x 110 mm Each 2 193.4 Rupees One Hundred NinetyThree Paise Fourty Only 386.8

12.79.5.2 110 mm bend Each 13 132 Rupees One Hundred ThirtyTwo Only 1716

12.79.6 Shoe (Plain) 0

12.79.6.2 110mm Shoe Each 1 115.95 Rupees One Hundred Fifteen Paise NinetyFive Only 115.95

201 SOR 12.80 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs, screwed with M.S screws of required length, including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete. 0

12.80.2 110 mm Each 46 182.72 Rupees One Hundred EightyTwo Paise SeventyTwo Only 8405.12

202 SOR 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. Each 13 47.9 Rupees FourtySeven Paise Ninety Only 622.6999999999999

203 23.1 Trenching in ordinary soil up to a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling within a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). Cum 1444.4759999999999 44.7 Rupees FourtyFour Paise Seventy Only 64568.0772

204 23.2 Supplying and stacking of good earth at site including royalty but excluding carriage (earth measured in stacks will be reduced by 20% for payment). Cum 1536.2820200668896 143.5 Rupees One Hundred FourtyThree Paise Fifty Only 220456.46987959865

205 23.4 Supplying and stacking at site dump manure from approved source, excluding carriage (manure measured in stacks will be reduced by 8% for payment): 0

23.4.2 Screened through sieve of I.S designation 16mm Cum 144.4476 299.4 Rupees Two Hundred NinetyNine Paise Fourty Only 43247.61143999999

206 23.5 Rough dressing the trenched ground including breaking clods. 100sqm 14.444759999999999 85.9 Rupees EightyFive Paise Ninety Only 1240.804884

207 23.6 Uprooting weeds form the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. 100sqm 14.444759999999999 283.2 Rupees Two Hundred EightyThree Paise Twenty Only 4090.7560319999993

208 23.7 Fine dressing the ground 100sqm 14.444759999999999 208.8 Rupees Two Hundred Eight Paise Eighty Only 3016.065888

209 23.8 Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/and good earth to be paid separately). Cum 1444.4759999999999 30.1 Rupees Thirty Paise Ten Only 43478.7276

210 23.9 Mixing earth and sludge or manure in proportion specified or directed. Cum 1444.4759999999999 20.9 Rupees Twenty Paise Ninety Only 30189.548399999996

211 23.1 Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days or more tili the grass forms a thick lawn free form weeds and fit for mowing including supplying good earth if needed. 0

23.10.3 In rows 5 cm apart in either direction. 100sqm 320.4648268896321 1027.4 Rupees One Thousand TwentySeven Paise Fourty Only 329245.56314640807

212 Carriage of Materials with loading & unloading:- 0

Bricks 100A(local lead 1K+7P) ‰ No. 280194.31175065006 1140.58896 Rupees One Thousand One Hundred Fourty Paise FiftyNine Only 319586.5386375898

Coarse sand cum 2002.299408129969 4219.92 Rupees Four Thousand Two Hundred Nineteen Paise NinetyTwo Only 8449543.31835582

Stone chips & GSB cum 3174.332168422669 3915.26 Rupees Three Thousand Nine Hundred Fifteen Paise TwentySix Only 12428335.76573854

Local Sand ( Lead local 1K+2P) cum 7703.616099370079 310.469152 Rupees Three Hundred Ten Paise FourtySeven Only 2391735.157704976

Good Earth lead=(1k+2p) km Cum 1444.4759999999999 314.21 Rupees Three Hundred Fourteen Paise TwentyOne Only 453868.80395999993

Sludge or Manure Lead 8km Cum 1444.4759999999999 393.79 Rupees Three Hundred NinetyThree Paise SeventyNine Only 568820.20404

213 Difference Cost of materials :- 0

Bricks 100A ‰ No. 280194.31175065006 362.63 Rupees Three Hundred SixtyTwo Paise SixtyThree Only 101606.86327013823

Cement(PSC) mt 1277.3980384246936 110.37 Rupees One Hundred Ten Paise ThirtySeven Only 140986.42150093344

214 Add For Singnorage Fee @ 10% of Basic Materials Rate (Cost Including 12% GST) 0

2602 Bricks 100A ‰ No. 280194.31175065006 543.4240000000001 Rupees Five Hundred FourtyThree Paise FourtyTwo Only 152264.31366878527

0982 Coarse sand Cum 2002.299408129969 19.6896 Rupees Nineteen Paise SixtyNine Only 39424.474426315835

0297 Stone Chips (10mm ) Cum 2886.332168422669 73.68592000000001 Rupees SeventyThree Paise SixtyNine Only 212682.04125581935

6501 Local Sand Cum 2575.616099370079 15.887200000000002 Rupees Fifteen Paise EightyNine Only 40919.32809391233

Add 5.36 % GST on SOR Item as per BCD 5538670.96154003

215 DSR 5.14 Providing and Displaying Cycus revoluta in 35 cm challi, specimen , having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge Each 25 1183.9 Rupees One Thousand One Hundred EightyThree Paise Ninety Only 29597.500000000004

216 DSR 7.69 Providing and stacking of Plumeria alba of height 120-135 cm. with 2-3 branches in bags of size 30 cm as per direction of the officer-in-charge. Each 30 120 Rupees One Hundred Twenty Only 3600

217 DSR 5.33 Providing and Displaying Golden Bottle brush Topiary well developed with fresh & healthy foliage 5 to 6 big ball 115 to 180 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge Each 30 973.75 Rupees Nine Hundred SeventyThree Paise SeventyFive Only 29212.5

218 DSR4.79 Providing and Displaying Portulaca hybrid in different colour with bloom well developed fresh & healthy in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge Each 20 86.1 Rupees EightySix Paise Ten Only 1722

219 DSR 6.31 Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge Each 25 15 Rupees Fifteen Only 375

220 DSR 6.28 Providing and stacking of Syngonium variegated,of height 20-30 cm. with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 15 cm. as per direction of the officer-in-charge Each 50 21 Rupees TwentyOne Only 1050

221 2.25 Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. Sor Rate is -107.20 Less -12% GST. Kl 9600 95.71428571428571 Rupees NinetyFive Paise SeventyOne Only 918857.1428571428

222 5.1.27 Earth work in excavation of foundation trenches in ordinary soil (vide classification of soil item A ) and disposal of excavated earth so obtained to a distance up to 50 M and average lift of 1.5 M including leveling , ramming the foundation trenches, removing the roots of shrubs etc. all complete and as per specifications and direction of E/I. cum 148.79999999999998 189.6 Rupees One Hundred EightyNine Paise Sixty Only 28212.479999999996

223 5.7.21.2 Providing and L/C for Boulder crating duly packed(Materials within 50m Lead ) on Apron & slope of Bank in G.I. Wire crate including supply of G.I. Wire crate(3.0m x 1.50m x 0.60m) & 150mm square mesh made out of G.I. Wire 8 to 10 S.W.G. double knot at each joint in box type and with all cost of carriage, tax and royalty of stone boulder including carriage of materials from Mirzachowki to site with all complete job as per specification. Each 66 11861.9 Rupees Eleven Thousand Eight Hundred SixtyOne Paise Ninety Only 782885.4

224 Carraige of material(sewage material/silt) by Tractor lead 3 km K cum 7680 216 Rupees Two Hundred Sixteen Only 1658880

225 MR + WRD Analysis Providing hydraulic exvavator 15m long boom of 1 m3 bucket (output capacity 60 m3/hour) at site on bourly use rate basis including cost of POL (fuel), running, maintenance, operation charges including wages of operator with all costs & taxes and royalty for removal of daldal and sewage materials from bed and side slope of Nala. Per Hour 220 3013.40775 Rupees Three Thousand Thirteen Paise FourtyOne Only 662949.705

226 MR + WRD Analysis Providing hydraulic excavator of 1 m3 bucket(output capacity 60 m3/hour) at site on hourly use rate basis includng cost of POL( fuel), running, maintenance, operation charges including wages of operator with all costs & taxes and royalty for removal of daldal and sewage materials from bed and side slope of Nala. Per Hour 146 2612.8 Rupees Two Thousand Six Hundred Twelve Paise Eighty Only 381468.80000000005

227 MR + WRD Analysis Removal of Aquatic grass from bed and side slope of Nalas by ordinary labourers Sqm 5790 653.6003271068263 Rupees Six Hundred FiftyThree Paise Sixty Only 3784345.8939485243

Add @1% Labour Cess 48287.643989485245

SUPPLY & INSTALLATION OF FIXTURES 0

228 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 35 2482 Rupees Two Thousand Four Hundred EightyTwo Only 86870

229 8.16 Supply and Installation of regular / standard model A.C. ceiling fan of 1200 mm sweep including wiring the down rod of standard length (upto 30cm) with 1.5 sq.mm FR PVC insulated copper conductor, single core cable etc. as required. Each 6 2838 Rupees Two Thousand Eight Hundred ThirtyEight Only 17028

230 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as required Each 41 358 Rupees Three Hundred FiftyEight Only 14678

231 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0

8.17.1 300 mm sweep Each 14 2572 Rupees Two Thousand Five Hundred SeventyTwo Only 36008

232 5.2 Supplying and fixing 2'X9 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. Each 8 492 Rupees Four Hundred NinetyTwo Only 3936

233 5.3 Supplying and fixing 4'x20 watt LED batten with minimum efficacy 100lm/w in aluminoum housing and complete with integrated electronic driver etc. directly on ceiling / wall including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor single core cable etc. as required. Each 54 762 Rupees Seven Hundred SixtyTwo Only 41148

234 5.6 Supplying and fixing following types aluminium extruded suspended type LED luminaire with minimum efficacy 100 lm/w ensuring uniform and continuous illumination including suspension system complete with electronic driver etc and connection with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 0

5.6.2 4' long X 35/40 watt Each 5 4587 Rupees Four Thousand Five Hundred EightySeven Only 22935

235 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

5.8.2 15Watt Each 74 1608 Rupees One Thousand Six Hundred Eight Only 118992

5.8.3 18 watt Each 50 1694 Rupees One Thousand Six Hundred NinetyFour Only 84700

236 5.9.4 Supplying and fixing single wall mounted 9/10watt (2 ft. long) LED type batten fitting complete with electronic driver and LED tube etc. directly on wall including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor single core cable and earthing the body etc. as required. (Mirror Light) Each 7 589 Rupees Five Hundred EightyNine Only 4123

237 1.34 Supplying and fixing batten / angle holder including connections etc. as required. Each 44 80 Rupees Eighty Only 3520

238 6.1 Supplying and fixing following types lamp in existing electrical fitting/ fixture etc as required. 0

6.1.5 12 watt LED lamp Each 15 239 Rupees Two Hundred ThirtyNine Only 3585

6.1.6 15 watt LED lamp Each 29 250 Rupees Two Hundred Fifty Only 7250

239 5.1 Supplying and fixing 10/12 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,IP 65 protection and complete with integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. Each 20 1275 Rupees One Thousand Two Hundred SeventyFive Only 25500

240 1.33 Supplying and fixing 2 pin 5 Amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Each 77 64 Rupees SixtyFour Only 4928

241 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps moduler socket outlet & 6A modular type switch connection etc. as required. Each 89 414 Rupees Four Hundred Fourteen Only 36846

242 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/ 16 amps moduler socket outlet & 15/16A modular type switch connection etc. as required. Each 37 531 Rupees Five Hundred ThirtyOne Only 19647

243 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. Each 8 683 Rupees Six Hundred EightyThree Only 5464

244 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 0

1.24.6 Telephone socket outlet Each 20 131 Rupees One Hundred ThirtyOne Only 2620

245 1.27 Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches/ socket/TV / Telephone outlet in surface/ recess etc. as required. 0

1.27.1 75mmX75mmX50mm Each 20 234 Rupees Two Hundred ThirtyFour Only 4680

246 MP PWD 38.4 Supply, installation testing and commissioning of telephone tag block krone connector with enclosure complete as mentioned below 0

MP PWD 38.4.1 10 Pair Each 1 817.74 Rupees Eight Hundred Seventeen Paise SeventyFour Only 817.74

247 1.26 Supplying and fixing modular blanking plate on the existing modular plate & metal box excluding modular plate, etc. as required. Each 25 34 Rupees ThirtyFour Only 850

248 Supplying and fixing metal/ PVC box of following sizes ( nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required. 0

1.22.1 75mmX75mmX50mm deep Each 10 139 Rupees One Hundred ThirtyNine Only 1390

1.22.6 200mmX150mmX60mm deep Each 6 276 Rupees Two Hundred SeventySix Only 1656

249 1.3 Wiring for light point/ fan point/ exhaust fan point / call bell point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch , modular plate suitable size G.I. box etc as required. 0

1.3.1 Group A Point 47 782 Rupees Seven Hundred EightyTwo Only 36754

1.3.3 Group C Point 241 1146 Rupees One Thousand One Hundred FourtySix Only 276186

250 Wiring for group controlled (looped) light point/ fan point/ exhaust fan point / call bell point (without independent Switch etc.) with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit etc as required. 0

1.59.3 Group C Point 25 609 Rupees Six Hundred Nine Only 15225

251 1.5 Wiring for power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No.4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as required Meter 719 309 Rupees Three Hundred Nine Only 222171

252 1.7 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 1032 246 Rupees Two Hundred FourtySix Only 253872

1.7.4 Wiring for submain with 2x6 sq.mm +1X6 sq mm earth wire FRLS PVC insulated copper conductor single core cable in recessed PVC conduit as required. Meter 390 422 Rupees Four Hundred TwentyTwo Only 164580

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire Meter 80 660 Rupees Six Hundred Sixty Only 52800

1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire Meter 80 925 Rupees Nine Hundred TwentyFive Only 74000

253 Supplying & fixing of following size medium class PVC conduit along with accessories in surface/ recess including cutting of wall and making good the same in case of recessed conduit as required. 0

1.21.1 20 mm dia Meter 510 102 Rupees One Hundred Two Only 52020

254 1.16 Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed PVC conduit as required. 0

1.16.2 2 Pair Meter 510 31 Rupees ThirtyOne Only 15810

255 MP PWD 38.3 Supply installation, testingand commissioningof 0.5mm size solid annealed copper, jelly filled telephone cables, polythene insulated, petroleum jelly filledwithpoly-al laminatemoisturebarrier, polythene sheathed, armoured polythene jacketed telephone cables as per DOT specifications of following sizes 0

256 MP PWD 38.3.1 10 Pair Meter 30 204.14 Rupees Two Hundred Four Paise Fourteen Only 6124.2

MAIN PANEL & D.B.s

257 2.1.5 63 Amp, TP&N Each 1 6482 Rupees Six Thousand Four Hundred EightyTwo Only 6482

258 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus -bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0

2.9.1 4 way ( 4 + 12 ), Double door, horizontal type Each 2 4148 Rupees Four Thousand One Hundred FourtyEight Only 8296

2.9.2 6 way ( 4 + 18 ), Double door, horizontal type Each 2 5132 Rupees Five Thousand One Hundred ThirtyTwo Only 10264

259 2.32 Supplying and fixing cable end box ( Loose wire box , IP 43) suitable for following sheet steel M.C.B. Distribution board, on surface/ recess, complete with testing commissioning etc. as required 0

2.32.4 For 4 way Double door MCB TPN DB Each 2 1064 Rupees One Thousand SixtyFour Only 2128

2.32.5 For 6 way Double door MCB TPN DB Each 2 1111 Rupees One Thousand One Hundred Eleven Only 2222

260 Supplying and fixing of following rating C series MCB suitable for inductive and other loads of following poles in the existing MCB DB complete witth connections ,testing and commissioning etc. as required . 0

2.12.1 6 Amp. To 32 Amp. SP MCB 240 Volt Each 104 237 Rupees Two Hundred ThirtySeven Only 24648

2.12.4 32 Amp TPN MCB 415 Volt Each 2 1282 Rupees One Thousand Two Hundred EightyTwo Only 2564

2.12.8 40 TPN MCB 415 Volt Each 2 2329 Rupees Two Thousand Three Hundred TwentyNine Only 4658

261 2.14 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 10 13 Rupees Thirteen Only 130

MAIN L.T. PANEL 0

262 8.12 Supplying and fixing of floor mounted out door feeder pillar cubicle type panel board fabricated with 14 guage iron sheet suitable for panel mounted switch disconnector, /MCCB and complete with busbar chamber, insulator, nut-bolt with MS 40x40x5 mm angle stand and complete with powder painting etc as required. (But without busbar copper strip. MCCB,& PCC work) Sft 6 2261 Rupees Two Thousand Two Hundred SixtyOne Only 13566

263 8.11 Supplying and fixing of fabricated Electrical control panel of cubical contruction, wall/floor mounted type fabricated out of 16 SWG CRCA iron sheet compartmentalised with hinged door, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley,internal wiring, earth terminals, busbar chamber, insulator,and complete in all respect etc. and panel manufactures must be approved by CPRI. etc as required. (But without RYB indicator, ammeter, voltmeter, inter-connection copper cable, /solid copper strip, switchgears etc.) Sft 22 1809 Rupees One Thousand Eight Hundred Nine Only 39798

264 Providing and fixing of following rating electrical items in existing cubical panel including drilling holes in if required, making connections etc. as required . 0

2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required 0

2.4.8 100Amp 30 KA FP 415 volt MCCB Each 1 46109 Rupees FourtySix Thousand One Hundred Nine Only 46109

2.7.1 (ii) 40 Amp, 4 pole changeover switch . Each 1 7135 Rupees Seven Thousand One Hundred ThirtyFive Only 7135

2.7.3 100 A four pole ON-load panel mounted changeover switch Each 1 49446 Rupees FourtyNine Thousand Four Hundred FourtySix Only 49446

265 2.8.3 Supplying and fixing 2+6 way double door single pole and Neutral sheet steel M.C.B. D.B, 240 Volts in surface/ recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar , detachable gland plate, interconnection phosphatised and powder painted including , earthing etc. as required( But without MCB/RCCB/ Isolator) Each 11 1713 Rupees One Thousand Seven Hundred Thirteen Only 18843

266 2.8.4 Supplying and fixing 2+10 way double door single pole and Neutral sheet steel M.C.B. D.B, 240 Volts in surface/ recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar , detachable gland plate, interconnection phosphatised and powder painted including , earthing etc. as required( But without MCB/RCCB/ Isolator) Each 1 1972 Rupees One Thousand Nine Hundred SeventyTwo Only 1972

267 2.8.5 Supplying and fixing 6 way double door sinle pole and Neutral sheet steel M.C.B. D.B, 240 Volts in recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar , detachable gland plate, interconnection, phosphatized and powder painted including nting, earthing etc. as required ( But without MCB/ RCCB/Isolator) Each 2 2197 Rupees Two Thousand One Hundred NinetySeven Only 4394

2.12.1 6 Amp. To 32 Amp. SP MCB 240 Volt Each 11 237 Rupees Two Hundred ThirtySeven Only 2607

2.12.4 32 Amp TPN MCB 415 Volt Each 4 1282 Rupees One Thousand Two Hundred EightyTwo Only 5128

2.12.8 40 Amp TPN MCB 415 Volt Each 4 2329 Rupees Two Thousand Three Hundred TwentyNine Only 9316

2.12.2 32 Amp SPN MCB 240 Volt Each 30 606 Rupees Six Hundred Six Only 18180

Miscellaneous 0

268 8.13 Supplying and fixing panel mounted digital multimeter (voltmeter and ammeter) including CT coil and RYB pilot indicator in the existing cubical panel board including drilling holes in the panel board making connections etd as required Each 2 6536 Rupees Six Thousand Five Hundred ThirtySix Only 13072

1830+anal. Copper strip of all sizes. Kg 13 908 Rupees Nine Hundred Eight Only 11804

269 2.2 Providing and fixing MV danger notice plate of 200mmX150mm made of mild steel at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side etc as required. Each 2 214 Rupees Two Hundred Fourteen Only 428

270 DSR EnM 2025 40.3 Supplying Installation Testing and Commissioning of 4MP IP IR Dome Camera having following specifications and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 0

DSR EnM 2025 40.3 3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120dB or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6) Video Streaming & Frame Rates :- Triple streaming , configurable Main stream: 4MP (2560×1440)25/30fps , Sub streams minimum: 720P@25/30 fps 7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, video encryption, IP/MAC filtering, HTTPS, trusted upgrade 9) Onboard Storage: Camera should support built-in Micro SD/ SDHC/ SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 10) Recording Management: Format SD, overwrite, storage management, video to NAS device, 11) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast, 0

DSR EnM 2025 40.3 13) System Capability: ONVIF, Camera shall support open source VMS 14) Ethernet: 1 RJ 45 10/100 Ethernet port 15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement. 16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 17) Power Requirement: 12VDC/24 VDC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body 19) Operating Condition:- Ambient Temperature:- (- )05°C to 50°C, humidity 95% (max) (non-condensing) 20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS 0

40.3.1 4MP @ 25/30fps@1440P (2560 x 1440) Dome Camera with 2.8/ 3.6/ 6/8/12 mm fixed lens (as per site requirement). Each 2 10365 Rupees Ten Thousand Three Hundred SixtyFive Only 20730

271 DSR EnM 2025 40.4 Supplying Installation Testing and Commissioning of 4MP IP IR Outdoor Bullet Camera having following specifications and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control,White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 0

DSR EnM 2025 40.4 3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120dB or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6) Video Streaming & Frame Rates :- Triple streaming , configurable Main stream: 4MP (2560×1440)25/30fps Sub streams minimum: 720P@25/30 fps 7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, video encryption, IP/MAC filtering, HTTPS, trusted upgrade 9) Onboard Storage: Camera should support built-in Micro SD/ SDHC/ SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 10) Recording Management: Format SD, overwrite, storage management, video to NAS device, 11) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast, 0

DSR EnM 2025 40.4 13) System Capability: ONVIF, Camera shall support open source VMS 14) Ethernet: 1 RJ 45 10/100 Ethernet port 15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement. 16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 17) Power Requirement: 12VDC/24 VDC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body 19) Operating Condition:- Ambient Temperature:- (- )05°C to 50°C, humidity 95% (max) (non-condensing) 20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS 0

40.4.1 4MP @ 25/30fps@1440P (2560 x 1440) Outdoor Bullet Camera with 2.8/ 3.6/6/8/12 mm fixed lens (as per site requirement) Each 8 10063 Rupees Ten Thousand SixtyThree Only 80504

272 DSR 2025 39.23 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. 0

39.23.1 6U Rack Each 1 6939 Rupees Six Thousand Nine Hundred ThirtyNine Only 6939

273 1.58.1 Supplying and drawing of UTP 4 Pair CAT-6 LAN cable in the existing surface / recessed PVC concuit etc. as required. Meter 200 52 Rupees FiftyTwo Only 10400

274 1.21 Supplying & fixing of following size medium class PVC conduit along with accessories in surface/ recess including cutting of wall and making good the same in case of recessed conduit as required. 0

1.21.1 20 mm dia Meter 200 102 Rupees One Hundred Two Only 20400

275 DSR EnM 2025 40.10 Supplying Installation Testing and Commissioning of following Channel Network Video Recorder (NVR) with camera licenses to record for all channels having specifications and features etc as mentioned below : 1) Network Video Recorder Embedded/ Installed OS (Linux) along with Camera Licenses for number of channels of NVR to record per NVR and to provide a live view, storage and simultaneously Multi-channel playback of all IP, IR camera or more and must be ONVIF with minimum support of 256Mbps incoming Bandwidth 2) NVR should support H.265 or better, H.264, MJPEG, MPEG4 support 3) Must support 1 channel Input, 1 channel Output, RCA for Two-way Talk 4) Intelligent auto power on when power resumes after power outage. 5) Storage: It should support minimum 2 SATA Slots with 20TB capacity/ Slot. 6) Connectivity Interface : 1 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x RS232 7) Backup Interface : Its should have 2 Nosx USB port (1x USB3.0, 1xUSB2.0) 8) Video Output Ports: 1x HDMI and 1 VGA 9) Alarm Ports: It should have 4/1 Ch In/ Out ports to connect various type of external sensors and output devices like hooter/ Siren etc. 0

DSR EnM 2025 40.10 10) Email & SMS Altert options: Option for SMS/ Email Alerts to minimum 5 designated mobile number for power failure, HDD failure, vandalism, tempring, network disconnection and panic 11) Web & Mobile Application: Web, Mobile app ( For iPhone, iPad, Android Phone) for alerts and viewing. 12) Protocols: HTTP, HTTPS, TCP/IP, IPv4, UDP, NTP, DHCP, DNS, SMTP, UPnP, DDNS, Alarm Server, IP Search, Multicast, Auto Registration, ONVIF (Profile T, Profile S, Profile G), CGI, SDK and OEM Cloud for remote monitoring without any public IP need. 13) Standards: CE, FCC, RoHS and BIS Certified 14) Power Supply : Should support 12VDC, 4Amp or AC100-240V, 50/60Hz Power supply. 15) Operating Condition : Ambient Temperature (-5°C to 50°C), humidity 90% (max) (non-condensing) 16) The VMS, NVR application shall support all the features & functionalities of the offered cameras. 17) VMS should consist of Base license and Channel Licenses. VMS should be provided with camera Licenses , with no dependency of VMS licenses by binding with the MAC address of the cameras to achieve the functionality. 18) The NVR OEM shall be responsible for providing a mobile application compatible with both Android and iOS devices, enabling remote monitoring and playback of cameras/NVR footage. 0

DSR EnM 2025 40.10 19) The OEM must provide its own DDNS server hosted in India, eliminating the need for a public IP address for remote monitoring over the Internet. 20) Must support Resolution: 7680x4320 (8K), 3840*2160, 1920×1080, 1280×1024,1280×720, 1024×768 21) Must support recording resolution upto 32MP 22) Must support Continuous, Alarm, Motion, Instant, Panic Recording Mode 23) When alarm recording is enabled and an event occurs, you can click the alarm icon on monitoring page to view the alert details. The snapshot function is supported on monitoring and playback page 24) The Network Video Recorder (NVR) shall be configured to send email whenever a system message is created or an alarm event occurs. The email server shall be a valid SMTP server. Each recipient email address shall be configured to receive any combination of critical, warning, or informational messages or alarm notifications. When an alarm occurs, the email message includes the NVR name, time of alarm and a list of camera that is configured to record upon alarm. 25) It should support Network Support: HTTP, TCP/IP, SMTP, DHCP, DNS, DDNS, FTP, NTP, UPnP, Multi IP Setting. Convert multiple recording files to one avi/MP4 file. 26) General AI Based Search: Search Pictures by channel, time, event type, target classification (Fall Detection, People Approach Detection, People No. Exception Detection, People Staying Detection, Violence Detection. 0

DSR EnM 2025 40.10 27) Alarm Notifications based on: Motion detection, video tampering, video loss, scene changing, PIR alarm, Camera external alarm, Face detection, face recognition, perimeter protection (intrusion and tripwire), ANPR, people counting, stereo analysis, crowd distribution, heat map, Disk Full, Storage Error, IP Conflict and abnormal behavior of fan 28) Alarm Notification should be linked with Recording, snapshots, Camera external alarm output, buzzer, logs, presets and email. 29) Built-In Artificial Intelligence: NVR should have built-in AI :- - 2 Channel face detection and recognition, - Minimum 4 Channel perimeter protection, - Minimum 8 Channel Smart Motion Detection 30) Face Recognition Database Capacity: It should support total Blacklist and Whitelist capacity of Minimum 20,000 Faces or more with Face Detection speed of 12 face images/sec. 31) Face & Human Attributes Search: Search Pictures/ Video by Gender, age group, glasses, expressions, face mask, beard, Top color, top type, hat, bag, age, gender and umbrella. 32) ANPR Capability: It should support ANPR Camera with License plate, plate color, vehicle body, vehicle model, vehicle logo, calling, seatbelt, vehicle registration location etc vehicle attributes. 0

DSR EnM 2025 40.10 33) Alarm Notifications based on: Motion detection, video tampering, video loss, scene changing, PIR alarm, Camera external alarm, Face detection, face recognition, perimeter protection (intrusion and tripwire), ANPR, people counting, stereo analysis, crowd distribution, heat map, Disk Full, Storage Error, IP Conflict and abnormal behavior of fan, cybersecurity exception 34) Alarm Notification should be linked with Recording, snapshots, Camera external alarm output, buzzer, logs, presets and email. 35) General AI Based Search: Search Pictures by channel, time, event type, target classification (Fall Detection, People Approach Detection, People No. Exception Detection, People Staying Detection, Violence Detection. 36) Smart playback function: Should support smart search for the selected area in the video and smart playback to improve the playback efficiency 37) VCA (Video Content Analytic): Should support multiple video contented analytics based on camera analytics 0

40.10.2 16 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9/16, 2nd screen: 1/4/8/9/16 Each 1 12799 Rupees Twelve Thousand Seven Hundred NinetyNine Only 12799

276 DSR EnM 2025 40.12 Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications. 0

40.12.1 4TB (Terabytes) Each 1 13943 Rupees Thirteen Thousand Nine Hundred FourtyThree Only 13943

277 DSR EnM 2025 39.3 Supplying, installation, Testing and commissioning of following capacity 24 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: At least 24 X RJ-45 Gigabit Ethernet Ports and additional 2 X 10G Base -T with 4 X SFP Ports with non-blocking architecture by having Switching capacity of min. 168Gbps and packet forwarding rate of 125Mpps or higher, 16K MAC table. Console Port, USB port, Stacking support of min. 8 units per stack. Internal dual AC Power supply, STP, RSTP, MSTP, BPDU Filter, BPDU Restriction, Min. 9K Jumbo Frame, LBD, IGMP Snooping V1/V2/V3, MLD Snopping V1/V2. IGMP /MLD Groups 1K or more, IPv4/IPv6 Loopback Interface, 16 L3 IP Interface, Ipv6 ND, VRRPv3, UDP Helper, ECMP. VLAN: 802.1Ǫ, Port based, Ǫ-in-Ǫ, Multicast VLAN, Protocol VLAN, VLAN Trunking, DHCP Snopping, Server, server Screening. RADIUS , TACACS+ Authentication, ǪoS: 802.1P, 8 queues per port, ǪoS : WRR, Strict+WRR, WRED, 802.1p. ACL: MAC based, IPv4C IPv6, TCP/UDP Port number, time based ACL, TFTP Client, SNMP V1, v2c, v3, SNMP traps, RMON, DHCP server, relay, client, LLDP, LLDP-MED, OAM, Dying Gasp, 802.3ah, sflow, RIP, OSPF v2/v3, policy based route, SSL, SSH. 6 kV surge protection on all Gigabit Ethernet ports and on all GE RJ-45 access ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required. 0

39.3.1 24 port PoE Layer 2 Network Switch with PoE Support of 370W or higher with each copper port supporting 802.3at PoE+ min. Each 1 125393 Rupees One Lakh TwentyFive Thousand Three Hundred NinetyThree Only 125393

278 42.4 Supplying, Installation, Testing and Commissioning of following size LED display (LED monitor) industrial grade with 3840x2160 resolution or better, USB playback, bluetooth and miracast connectivity, 4X HDMI 2.0, DP 1.2, HDR 10/10+, brightness: 500-nits or better, Video wall mode should be available, contrast ratio: 1200:1, OPS slot, viewing angle (H/V): 170°/ 170°, response time less than 12ms, Display control shall be on monitor screen and programmable with remote (remote shall be supplied with system), Key Board, Optical Mouse, etc. as required. 0

42.4.3 55 inch or larger Each 1 82057 Rupees EightyTwo Thousand FiftySeven Only 82057

SUPPLY & LAYING OF UNDER GROUND CABLE 0

279 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0

7.7.4 (A) 4 core 10 sq mm Meter 60 249 Rupees Two Hundred FourtyNine Only 14940

7.7.9 50 sq. mm, 3.5 core Meter 80 561 Rupees Five Hundred SixtyOne Only 44880

280 7.1 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as reqd. 0

7.1.1 (a) Up to 35 sq mm Meter 82.5 315 Rupees Three Hundred Fifteen Only 25987.5

7.1.2 Above 35 sq. mm and upto 95 sq. mm Meter 60 326 Rupees Three Hundred TwentySix Only 19560

281 7.4 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 0

7.4.1 (a) Up to 35 sq mm(clamp with 1 mm saddle) Meter 20 43 Rupees FourtyThree Only 860

7.4.2 Above 35 sq. mm and upto 95 sq. mm (Clamped with 25 x 3 mm MS flat clamp) Meter 10 109 Rupees One Hundred Nine Only 1090

282 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of of 1.1 KV grade of following size in the existing RCC/ HUME/METAL pipe etc. as required. 0

7.5.1 (a) Up to 35 sq mm Meter 10 37 Rupees ThirtySeven Only 370

283 DSR 2022 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as reguired.

9.1.20 (a) 3.5 Core 25 sq mm Set 2 313 Rupees Three Hundred Thirteen Only 626

9.1.32 (a) 4 Core 10 sq mm (25mm) Set 2 269 Rupees Two Hundred SixtyNine Only 538

284 9.1 Excavation for foundation in soft soil including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil directed within lead of 50 metres. Cum 2 240 Rupees Two Hundred Fourty Only 480

285 9.7 Providing and laying in position cement concrete 1:2:4 ( 1: cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size )in foundation of pump DG set , feeder pillar and refilling etc. as required Cum 2 8370 Rupees Eight Thousand Three Hundred Seventy Only 16740

286 2.2 Providing and fixing MV danger notice plate of 200mmX150mm made of mild steel at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side etc as required. Each 1 214 Rupees Two Hundred Fourteen Only 214

287 9.2 Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres. Cum 11 242 Rupees Two Hundred FourtyTwo Only 2662

288 9.3 Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 metres. Cum 6 155 Rupees One Hundred FiftyFive Only 930

289 9.14 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. In the existing trench, complete as required. 0

9.14.4 160 mm dia (OD- 160 mm &ID 135mm nominal) Meter 5 371 Rupees Three Hundred SeventyOne Only 1855

9.14.1 63 mm dia (OD-63 mm & ID-51 mm nominal) Meter 10 128 Rupees One Hundred TwentyEight Only 1280

290 10.5 Laying of one number PVC insulated and PVC sheathed aluminium conductor cable of1.1 KV grade of following size in the existing RCC/ HUME/METAL pipe etc. as required. 0

10.5.2 Above 35 sq. mm and upto 95 sq. mm M 10 170 Rupees One Hundred Seventy Only 1700

291 2025 11.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as reguired. 0

11.1.22 3½ X 50 sq. mm (35mm) Set 4 1336 Rupees One Thousand Three Hundred ThirtySix Only 5344

292 3.2 Earthling with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. Set 4 6323 Rupees Six Thousand Three Hundred TwentyThree Only 25292

293 3.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. Set 1 6884 Rupees Six Thousand Eight Hundred EightyFour Only 6884

294 3.11 Supplying and laying 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode, including connection with G.I. nut, bolt, spring, washer excavation and refilling etc. as required. Meter 60 721 Rupees Seven Hundred TwentyOne Only 43260

295 3.12 Providing and laying earth connections from earth electode with 6 SWG dia G.I. wire in 15 mm. Dia G.I.pipe from earth electrode including connection with G.I. thimble excavation and refilling etc. as required. Meter 15 278 Rupees Two Hundred SeventyEight Only 4170

296 3.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble as required. Meter 105 37 Rupees ThirtySeven Only 3885

297 3.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing etc. as required. Meter 52.5 53 Rupees FiftyThree Only 2782.5

BILL OF QUANTITY FOR NON SOR ITEMS

TOURIST DEVELOPMENT OF VISHWAMITRA PLACE, VISAUL, LOCATED IN HARLAKHI BLOCK UNDER MADHUBANI DISTRICT.

Bill of Quantity

(Each Item rate must be filled)

S.NO S.NO/SOR Description of Work Unit Qnty Amount (Rs.)

298 MR Finishing exterior walls with Ceramic textured finish with protection coating by Ultratech Texture Paints (UTTPL) ( Natural - Ceramic/ Stony of approved shade or approved equivalent make) to external wall surfaces comprising of water-borne, penetrating, water repellent EM- primer & super durable water based acrylic silicon resin clear and super durable dirt and dust resistant protection coat of FSI Clear coat, which shall be highly water repellant, Anti-algae & anti-fungal in nature.

The coating shall also cover hairline cracks with application method which includes 2 coats of E M Primer, 2 coats (Silmultaneouly) of 100% natural Ceramic & granite crushed stone , all in approved colour and texture including preparation of surface, appropriate primer coat etc. applied as per manufacturer's instructions complete & project consultant instructions, allow for scaffolding, staging as required. The finish shall be natural colour/ non pigmented, water repellant, resistant to condensate formation, cover hairline cracks/ crazing, UV & alkali resistant & ensure good breathability for the substrate all to complete as per direction of Engineer-in-charge. sqm 542.332

299 MR Providing and laying CBL1 Tettenhall Red Linea Bricks Size- 300X40X17 mm Tile cladding on walls laid over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the Tile shade including filling / grouting and finishing complete as per direction of Engineer-in-charge. sqm 120.07049999999997

300 MR Providing and fixing Stainless steel 304 Grade H- type pull handle of size min 32 mm dia and 1200mm long of approved make including SS screws, including making holes of required size in shutter etc. complete as per direction of Engineer-in-Charge. sqm 2

301 MR Providing and fixing SS Bottom patch Lock with cylinder of approved make including necessary screws etc. all complete. sqm 1

302 MR Providing and fixing SS floor mounted half dome door stopper of dia 45mm including necessary screws etc. all complete. sqm 2

303 MR Providing and fixing in position exterior/interior Glass Fiber Reinforced Concrete (GFRC/GRC) cladding panels of specified thickness, size, and design. The panels shall be manufactured using Alkali Resistant (AR) glass fibers, white/grey cement, fine aggregates, and approved admixtures. The rate includes making provision for concealed embedded anchors, brackets, expansion bolts, and stainless steel (SS) fasteners. The item also includes filling joints with approved weather-proof sealants/polysulfide or polyurethane sealants and backer rods, along with applying a primer and weather-coat over the panels as approved by the Engineer-in-Charge. All complete as per architectural drawings and manufacturer's specifications. sqm 94.5728

304 MR Providing and fixing counter basin size- (mm) 190x550x430 (Jaquar,CAT NO- FLS-wht-5701) including fixing and all accessories as per manufacturers specification and direction of Engineer-in-charge. Each 15

305 MR Provding and fixing PVC Soil ,Waste & vent pipes all complete

110 mm dia metre 176

40 mm dia metre 66

306 MR Provding and fixing PVC fittings all complete as/specification & directionof E/I

110 mm vent cowel Each 6

110 mm plain bend Each 52

110 mm door bend Each 33

110 mm dia X 45 Bend Each 11

110 X 110 mm dia plain - y Each 26

110 mm pipe clip Each 20

110 mm pipe clip Each 8

110 X110 mm dia p-trap Each 43

40 mm elbow Each 109

40 mm plain tee Each 27

307 MR Establishment of -2HP of submersible pump set of approved brand and make, all complete each 1

308 M/R Providing and fixing Grab bar (jaguar WAC-WHT-BAI090) & (jaguar WAC-WHT-BG0800) Each 1

309 MR Establishment of -2HP of submersible pump set of approved brand and make, all complete each 1

310 NS Planting the various varieties of plants, all complete, with digging all holes, providing sludge / manure / fertilisers etc. as required for the particular varieties, all complete, as per directions of E/I, all complete, with a maintenance of 3 months from the date of the plantation Each 2972

311 NS Supply and Installation of aesthetically designed Dustbins, Each 20

312 NS Supplying and Installation of Garden Bench of size 150cm x 70cm, Model No. DGB-004/EXL-100% rust free of Dwarka India or approved equivalent, finished with zinc plating, metallic primer, metallic top coat, metallic antique and PUP clear laquer, all complete as / directions of E/I. Each 30

313 MR 4-Seater Paddle (Pedal) Boat – FRP Hull FRP hull & deck with UV-resistant gel-coat; 4 molded seats; 2 pedal stations driving sealed chain/gear to paddlewheel/prop; tiller/wheel steering with FRP rudder; anti-skid deck; SS-304 fasteners; drain plugs; towing eye & 2 cleats; positive flotation; reflective strips; user manual (EN/HIN). Warranty: 12 months on hull/drive. Supply includes: boat, mooring ropes (2×10 m), boat hook, whistle, basic first-aid kit, on-water commissioning demo. Each 4

314 MR Life Jacket (PFD), 100 N ISO 12402 (100 N) compliant; high-viz fabric with retro-reflective tape; closed-cell foam; adjustable waist; crotch/leg strap; whistle; lifting loop; robust stitching; size marking. Each 20

315 MR Ring -Conforming to BIS IS 5326 (or SOLAS-type); HDPE shell with PU foam; OD ~750 mm, ID ~440 mm; 4 hand-grips; floating 30 m polypropylene throw-line; wall/rail mounting bracket; retro-reflective tape. Each 10

316 M/R Supply, Installation, Testing and Commissioning of 15 W LED solar Standalone Street lighting system having minimum initial lumen output of 1575 lumens (As per LM79 report of NABL lab) . The luminaire must be having inbuilt blue tooth system for monitoring health condition through an IOS & Android App based mobile application on Mobile Phone , with MPPT charge controller and IP 66 protection . The Solar lighting system should be having 60 Wp PV module, 12.8V/40 Ah LiFePO4 (Lithium Ferro Phosphate) battery pack, 6 mtr long M .S galvanized Tubular pole (Hot dip galvanized) , Metallic battery box and Stainless steel Nuts & bolts with 4 year maintenance. Complete set make Havells (Cat no.LHSTANU7AAAI015) or approved equivalent, including all works with RCC foundation, all complete. Each 70

317 M/R Supply and Erection of 9 M Semi solar High mast with panel head frame and Foundation bolts. SITC of highly Efficient IP65 LED Hybrid Solar lighting system having minimum System lumen output as 11340 Lumen with maximum system wattage of 63W with 180lm/W. with inbuilt high efficiency solar panel and LIFEPO4 Battery and high efficiency microprocessorbased charge controller. Panel – 335W LifePO4 battery - 25.6V 60Ah and IP65 protection.4no. light on each Mast of 63 watt.all complete including Foundation,installation etc Each 1

318 M/R Supplying Installing Testing and commissioning of 20 Pair distribution tag box all complete as per specification and direction of E/I Each 1

319 Supply of PVC insulated PVC sheathed aluminium conductor armoured under ground cable of graded 1.1 KV for working voltage upto 1100 volts conforming to ISI 1554 (Part-I) of 1964 with upto date amendment as detailed below.

AR-1 (a) 3.5 Core 25 sq mm Meter 75

BIHAR STATE TOURISM DEVELOPMENT CORPORATION LTD.

(A GOVERNMENT OF BIHAR UNDERTAKING)

TOURIST DEVELOPMENT OF VISHWAMITRA PLACE, VISAUL, LOCATED IN HARLAKHI BLOCK UNDER MADHUBANI DISTRICT.

QUOTING SHEET FOR BIDDERS

Name of Contractor

Address of Contractor

E-mail ID of Contractor Mobile Number

NIT - 03/E-TENDER/ BSTDC/SBD/2026-27 (GR 01)

Sl No. Description Estimated Amount Rate Quoted by Contractor

% Above/Below TOTAL QUOTED AMOUNT Rs.(In Figure) TOTAL QUOTED AMOUNT Rs.(In Words)

1 Total Schedule Amount (Rs.) 121337984

2 Total Non-Schedule Amount (Rs.) To be Quoted !

TOTAL AMOUNT Rs. 133370143

BILL OF QUANTITY FOR TOURIST DEVELOPMENT OF VISHWAMITRA PLACE, VISAUL, LOCATED IN HARLAKHI BLOCK UNDER MADHUBANI DISTRICT.

BASED ON S.O.R. B.C.D.GOVT. OF BIHAR EFFECTIVE FROM 01/01/2022/MR

SL.NO DESCRIPTION UNIT QTY. RATE AMOUNT

(IN DIGIT) (IN WORD)

1 2.29 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

2.29.1 All kinds of soil. 100sqm 51.64781914156448 1355.4 Rupees One Thousand Three Hundred FiftyFive Paise Fourty Only 70003.45406447651

2 2.2 Earth work in rough excavation , banking excavated earth in layer not exceeding 20 cm in depth , breaking clods watering , rolling each layer with 1/2 tonne roller or wooden or steel rammers and rolling every 3rd and topmost layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks , marginal banks and guide banks or filling up ground depressions. lead upto 50 m and lift upto 1.5 m.

2.2.1 All Kinds of soil Cum 7488 386.6 Rupees Three Hundred EightySix Paise Sixty Only 2894860.8000000003

3 20.3 Boring, Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :

20.3.2 400 mm dia piles metre 48.599999999999994 2691 Rupees Two Thousand Six Hundred NinetyOne Only 130782.59999999999

4 2.6 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. 0

2.6.1 All kinds of soil Cum 4154.211249999999 314.9 Rupees Three Hundred Fourteen Paise Ninety Only 1308161.1226249996

5 2.8 Earth work in excavation in foundtion trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. 0

2.8.1 All kinds of soil Cum 677.92925 360.7 Rupees Three Hundred Sixty Paise Seventy Only 244529.080475

6 2.27 Extra for every additional lift of 1.5 m or part thereof in. 0

2.27.1 All kinds of soil Cum 808.858 49.4 Rupees FourtyNine Paise Fourty Only 39957.585199999994

7 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead. Cum 3908.8794224999997 123.9 Rupees One Hundred TwentyThree Paise Ninety Only 484310.16044775

8 2.28 Supplying and Filling in plinth with local sand and under floors including watering, ramming consolidating and dressing complete. cum 7583.639251131829 287.3 Rupees Two Hundred EightySeven Paise Thirty Only 2178779.5568501744

9 2.35 Supplying chemical emulsion in sealed containers including delivery as specified. 0

2.35.1 Chlorpyriphos/Lindone emulsifiable concentrate of 20% litre 562.5832337833518 200.9 Rupees Two Hundred Paise Ninety Only 113022.97166707538

10 2.37 Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL antitermites treatrnent(including the cost of chemical emulsion) 0

2.37.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.55 litres per linear metre including drilling and plugging holes etc. 0

2.37.2.1 With chlorpyriphos E.C. 20% with 1% concentration metre 376.8 49.1 Rupees FourtyNine Paise Ten Only 18500.88

11 2.37.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm diameter holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor. 0

2.37.3.1 With Chlorpyriphos EC 20% with 1% concentration sqm 762.6813796060944 241.2 Rupees Two Hundred FourtyOne Paise Twenty Only 183958.74876098995

12 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level: 0

4.1.3 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) cum 17.20502525 3998.1 Rupees Three Thousand Nine Hundred NinetyEight Paise Ten Only 68787.41145202499

4.1.4 1:2:4 (1 Cement: 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) cum 294.84000000000003 3879.4 Rupees Three Thousand Eight Hundred SeventyNine Paise Fourty Only 1143802.296

4.1.5 1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) cum 57.580817960609444 3434 Rupees Three Thousand Four Hundred ThirtyFour Only 197732.52887673283

4.1.8 1.4.8 (1 Cement :4 coarse sand :8 graded stone agregate 40 mm nominal size) cum 103.6699 2975.2 Rupees Two Thousand Nine Hundred SeventyFive Paise Twenty Only 308438.68648

13 4.3 Centering and shuttering including strutting, proping etc. and removal of form work for: 0

4.3.1 Foundations, footings, bases for columns sqm 316.76658000000003 211.1 Rupees Two Hundred Eleven Paise Ten Only 66869.425038

14 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. up to floor five level, excluding the cost of centering, shuttering and finishing: 0

4.2.6 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) cum 0.33810000000000007 4410 Rupees Four Thousand Four Hundred Ten Only 1491.0210000000002

15 4.4 Providing and Laying cement concreate in kerbs, steps and the like ator near ground level excluding the cost of centring, shuttering and finishing.

4.4.2 1:3:6 (1 Cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size) Cum. 768.75 3434 Rupees Three Thousand Four Hundred ThirtyFour Only 2639887.5

16 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). Sqm 153.637 245.6 Rupees Two Hundred FourtyFive Paise Sixty Only 37733.2472

17 4.12 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). per 50 kg cement 49.16384000000001 57.16 Rupees FiftySeven Paise Sixteen Only 2810.2050944000002

18 4.13 Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg. per square metre on damp oroof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Sqm 68.02199999999999 143.7 Rupees One Hundred FourtyThree Paise Seventy Only 9774.761399999998

19 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6(1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) over 75mm bed dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. sqm 219.51825000000002 436.6 Rupees Four Hundred ThirtySix Paise Sixty Only 95841.66795000002

20 SOR 5.3. Reinforced cement concrete work in beams,suspended floors roofs,having slope upto 15, landing,balconies, shelves,chajjas,lintal,bends,plain window sills stair case,and spiral staircases up to floor five level excluding the cost of centering,shuttering,finishing and reinforcement with 1:2:4 Cum 1.16 5335.9 Rupees Five Thousand Three Hundred ThirtyFive Paise Ninety Only 6189.643999999999

21 5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 0

a) 5.33.1 All works up to plinth level 0

5.33.1.1 Concrete of M-25 grade with minimum cement content of 330 kg/cum cum 1313.647603055 5063.4 Rupees Five Thousand SixtyThree Paise Fourty Only 6651523.273308687

b) 5.33.2 All work above Plinth level upto floor V Level. 0

5.33.2.1 Concrete of M-25 grade with minimum cement content of 330 kg/cum cum 375.17188096499996 5863.2 Rupees Five Thousand Eight Hundred SixtyThree Paise Twenty Only 2199707.7724739877

22 5.33A Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete 0

5.33A.1 All work up to plinth level cum 136.73266999999998 4756.9 Rupees Four Thousand Seven Hundred FiftySix Paise Ninety Only 650423.6379229999

5.33A.2 All works above plinth level upto floor V level 0

5.33A.2.1 Walls columns, pillars, posts cind struts cum 26.671750000000003 5293.5 Rupees Five Thousand Two Hundred NinetyThree Paise Fifty Only 141186.908625

5.33A.2.2 Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. cum 116.25597669921875 5677.2 Rupees Five Thousand Six Hundred SeventySeven Paise Twenty Only 660008.4309168047

23 5.33B Add or deduct for providing richer or leaner mixes respectively at all floor levels. 0

5.33B.1 Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. cum 279.6603966992187 164.5 Rupees One Hundred SixtyFour Paise Fifty Only 46004.13525702148

24 5.35 Add for using extra cement in the items of design mix over and above the specified cement content therein. quintal 1512.0298635753747 609.3 Rupees Six Hundred Nine Paise Thirty Only 921279.7958764757

25 5.9 Centering and shuttering including strutting, propping etc. and removal of form for: 0

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 923.9791000000001 211.6 Rupees Two Hundred Eleven Paise Sixty Only 195513.97756000003

5.9.2 Walls (any thickness) including attached pilasters. Butteresses, plinth and string courses etc. Sqm 1369.6336 375.1 Rupees Three Hundred SeventyFive Paise Ten Only 513749.56336

5.9.3 Suspended floors, roofs, landings, balconies and access platform. Sqm 1253.2873644687502 437.5 Rupees Four Hundred ThirtySeven Paise Fifty Only 548313.2219550782

5.9.4 Shelves (Cast in situ) Sqm 11.103299999999999 437.5 Rupees Four Hundred ThirtySeven Paise Fifty Only 4857.693749999999

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 1864.0474000000004 404.7 Rupees Four Hundred Four Paise Seventy Only 754379.9827800001

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 1513.5909445000002 494.4 Rupees Four Hundred NinetyFour Paise Fourty Only 748319.3629608001

5.9.7 Stairs, (excluding landings) except spiral-staircases. Sqm 1615.1061 439.9 Rupees Four Hundred ThirtyNine Paise Ninety Only 710485.1733899999

5.9.9 Arches,domes,vaults upto 6m span sqm 150.647878125 1128.6 Rupees One Thousand One Hundred TwentyEight Paise Sixty Only 170021.195251875

5.9.14 Extra for shuttering in circular work (20% of respective centring and shuttering items) sqm 80.36447849999999 20.2 Rupees Twenty Paise Twenty Only 1623.3624656999998

5.9.15 Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like. Sqm 472.023875 224.2 Rupees Two Hundred TwentyFour Paise Twenty Only 105827.75277499999

5.9.16 Edges of slabs and breaks in floors and walis- 0

5.9.16.1 Under 20 cms wide metre 1308.4796 130.2 Rupees One Hundred Thirty Paise Twenty Only 170364.04391999997

26 5.11 Extra for additional height in centring, shuttering wherever required with adequate bracing, propping etc. including cost of de-shutering and de centring at all levels over a height of 3.5 m ,for every additional height of 1 metre or part thereof (Plan area to be measured) 0

5.11.1 Suspended floors, roots, laning, beams and balconies (Plan area to be measured) Sqm 13.860000000000001 174 Rupees One Hundred SeventyFour Only 2411.6400000000003

27 5.18 Providing, precast cement concrete Jali 1:2:4(1 cement:2 coarse sand:4 stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement:3 fine sand) etc. Complete excluding plastering of the jambs, sills and soffits. 0

5.18.1 50 mm thick sqm 10.241822499999998 1062.7 Rupees One Thousand SixtyTwo Paise Seventy Only 10883.984770749998

28 5.22 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete. 0

5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia Kg 44091.98009023477 94.5 Rupees NinetyFour Paise Fifty Only 4166692.1185271856

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia Kg 59622.05660402821 92.6 Rupees NinetyTwo Paise Sixty Only 5521002.441533011

5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia Kg 67792.07642797247 90.8 Rupees Ninety Paise Eighty Only 6155520.5396599

5.22.7D Thermo-Mechanically Treated bars TMTC-500-16mm dia Kg 20635.70242383331 91.7 Rupees NinetyOne Paise Seventy Only 1892293.9122655147

5.22.7E Thermo-Mechanically Treated bars TMTC-500-20mm dia Kg 30170.24311637695 91.7 Rupees NinetyOne Paise Seventy Only 2766611.2937717666

5.22.7F Thermo-Mechanically Treated bars TMTC-500-25mm dia Kg 13291.635612333985 91.7 Rupees NinetyOne Paise Seventy Only 1218842.9856510265

29 6.1A Brick work with bricks of class designation 100A in foundations and plinth in :

6.1.12/1 Cement mortar 1.:4 (1 cement: 4 coarse sand ) cum 15.641999999999996 5017.9 Rupees Five Thousand Seventeen Paise Ninety Only 78489.99179999997

30 6.1A Brick work with bricks of class designation 100A in foundation and plinth in: 0

6.1.14A Cement mortar 1:6(1 cement:6 coarse sand) cum 72.93080624999999 4819.9 Rupees Four Thousand Eight Hundred Nineteen Paise Ninety Only 351519.19304437493

31 6.1C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : 0

6.1.14C Cement mortar 1:6 (1 cement: 6 coarse sand ) cum 365.03580000000005 4923 Rupees Four Thousand Nine Hundred TwentyThree Only 1797071.2434000003

32 6.3A Extra for Brick work in superstructure above plinth level upto floor V Level cum 48.04918124999999 842.2 Rupees Eight Hundred FourtyTwo Paise Twenty Only 40467.020448749994

33 6.13A Brick work 7cm thick with brick of class designation 100A in cement mortar 1:3(1 cement: 3 coarse sand) in superstructure. sqm 0.9428999999999998 482 Rupees Four Hundred EightyTwo Only 454.47779999999995

34 6.18A Half brick masonry with bricks of class designation 100A in foundations and plinth in : 0

6.18.4A Cement mortar 1:4 (1 cement: 4 coarse send) sqm 96.08458749999998 599.3 Rupees Five Hundred NinetyNine Paise Thirty Only 57583.49328874999

35 6.19A Extra for half Brick masonry in superstructure above pinth level upto floor V level. sqm 13.604725 89.7 Rupees EightyNine Paise Seventy Only 1220.3438325

36 6.3C Extra tor Brick work in superstructure above plinth level upto floor V cum cum 189.17092499999998 842.2 Rupees Eight Hundred FourtyTwo Paise Twenty Only 159319.753035

37 6.21A Extra for providing and placing in position 2 nos. 6mm dia, MS bars at every third course of half brick masonry (with F.P.S bricks) sqm 560.9725875 113.6 Rupees One Hundred Thirteen Paise Sixty Only 63726.48594

38 6.45 Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level. 0

6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) sqm 464.88800000000003 700.8 Rupees Seven Hundred Paise Eighty Only 325793.5104

39 6.48A Providing 150mm wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron concrete (1: 4:8), over one brick designation 100-A flat soling in proper grade and slope at the base, the drain duly plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I metre 270.325 582.5 Rupees Five Hundred EightyTwo Paise Fifty Only 157464.3125

40 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). 0

9.1.2 Sal wood cum 1.56495625 95670.7 Rupees NinetyFive Thousand Six Hundred Seventy Paise Seventy Only 149720.459906875

41 9.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 0

9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm 24.255000000000003 2845.6 Rupees Two Thousand Eight Hundred FourtyFive Paise Sixty Only 69020.028

42 9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 0

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 69.0813 1775.3 Rupees One Thousand Seven Hundred SeventyFive Paise Thirty Only 122640.03189

43 10.6 Supplying and fixing-rolling shuters of approved make.made of required size of M.S.Iaths interlocked together through their intire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arragements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 0

10.6.1 80x1.25mmM.S. Laths with 1.25mm thick top cover. sqm 17.49 2673.7 Rupees Two Thousand Six Hundred SeventyThree Paise Seventy Only 46763.01299999999

44 10.7 Providing and fixing ball bearing for rolling shutters each 22 424.2 Rupees Four Hundred TwentyFour Paise Twenty Only 9332.4

45 10.8.1 Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 sqm and upto 16.80 sqm in area (say average 14 sqm) sqm 17.49 1108.7 Rupees One Thousand One Hundred Eight Paise Seventy Only 19391.163

46 10.15 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 0

10.15.1.1 Profile B,Fixing with adjustable lugs with split end tail to each jamb metre 57.75 405.8 Rupees Four Hundred Five Paise Eighty Only 23434.95

47 26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modulus of elasticity 900 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for Separately). 0

Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 0

26.86.6 Frame size 65 x 125 mm metre 61 1182.9 Rupees One Thousand One Hundred EightyTwo Paise Ninety Only 72156.90000000001

48 26.87 Providing and fixing factory made single extruded WPC {Wood Polymer Composite} solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers {wood powder/ rice husk/wheat husk) and non toxic additives {maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N {Face) & 900N (Edge), minimum compressive strength 50 N/mm, modulus of elasticity 850 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In• Charge. {Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 0

26.87.2 35 mm thick sqm 19.425000000000004 4468.6 Rupees Four Thousand Four Hundred SixtyEight Paise Sixty Only 86802.55500000002

49 26.88 Providing and fixing factory made single extruded WPC {Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers {wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm', modulus of elasticity 850 N/mm' and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk 5.5 screws, all as per direction of Engineer-In- Charge. {Note: stainless steel butt hinges and necessary 5.5 screws shall be paid separately) 0 0

26.88.2 35 mm thick Sqm 1.5750000000000002 4803.1 Rupees Four Thousand Eight Hundred Three Paise Ten Only 7564.8825000000015

50 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (overall area of door shutter to be measured) sqm 91.985 401.4 Rupees Four Hundred One Paise Fourty Only 36922.778999999995

51 9.4 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 0

9.40.1.2 50x20mm metre 192.6 184.6 Rupees One Hundred EightyFour Paise Sixty Only 35553.96

52 9.48 Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete. 0

9.48.2 Fixed to openings / wooden frames with rawl plugs screws etc. Kg 882.96 161.1 Rupees One Hundred SixtyOne Paise Ten Only 142244.856

53 9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) each 234 130.8 Rupees One Hundred Thirty Paise Eighty Only 30607.200000000004

54 9.71 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete: 0

9.71.1 125x64x2.50 mm each 36 93.7 Rupees NinetyThree Paise Seventy Only 3373.2000000000003

55 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. each 70 810.1 Rupees Eight Hundred Ten Paise Ten Only 56707

56 9.96 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 0

9.96.1 300x16 mm Each 49 235.5 Rupees Two Hundred ThirtyFive Paise Fifty Only 11539.5

9.96.2 250x16mm Each 1 210.1 Rupees Two Hundred Ten Paise Ten Only 210.1

57 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 0

9.97.1 300x10 mm Each 140 111.4 Rupees One Hundred Eleven Paise Fourty Only 15596

9.97.4 150x10mm Each 9 71.6 Rupees SeventyOne Paise Sixty Only 644.4

58 9.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 0

9.100.1 125 mm each 142 57.1 Rupees FiftySeven Paise Ten Only 8108.2

9.100.2 100mm Each 7 50.3 Rupees Fifty Paise Thirty Only 352.09999999999997

59 0.000 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 0

9.101.2 Twin rubber stopper each 64 60.8 Rupees Sixty Paise Eighty Only 3891.2

60 9.103 Providing and fixing bright finished brass 100mm mortice latch and lock with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS:1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). Each 1 655.4 Rupees Six Hundred FiftyFive Paise Fourty Only 655.4

61 9.113 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineerincharge. each 21 649.5 Rupees Six Hundred FourtyNine Paise Fifty Only 13639.5

62 9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 0

9.127.1 1.5 mm thick Sqm 135.45 795.6 Rupees Seven Hundred NinetyFive Paise Sixty Only 107764.01999999999

63 9.15 Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC/Aluminium sliding window with necessary screws etc. complete. Each 10 160.8 Rupees One Hundred Sixty Paise Eighty Only 1608

64 9.151 Providing and fixing steel roller for uPVC/Aluminium sliding window with necessary screws etc. complete. Each 20 88.6 Rupees EightyEight Paise Sixty Only 1772

65 9.161 Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - incharge . (Cost of SS ball bearing hinges is excluded). metre 13.3 1791 Rupees One Thousand Seven Hundred NinetyOne Only 23820.300000000003

66 9.162 Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately). Sqm 10.290000000000001 9736.1 Rupees Nine Thousand Seven Hundred ThirtySix Paise Ten Only 100184.46900000001

67 9.164 Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-in- charge. The glass shall be clear, toughened, interlayered, non-wired fire resistant having 11 mm thickness of approved brand with 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 15 min of insulation (EI15) and having a sound reduction of ?37dB and LT of 86%. 0

Glass shall be compliant to class 2(B)2 category of Impact Resistance as per EN 12600. The glass should be manufactured in UL & TUV audited Facility and including UL-EU Certification.The maximum glazing size cannot be more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report for the complete system (Glazed Door or Partition) will be considered valid only if it contains the stamp and signature of the authorized signatory from the glass manufacturer. (Actual glass size is to be measured at site for payments). Sqm 1.0290000000000001 39995.8 Rupees ThirtyNine Thousand Nine Hundred NinetyFive Paise Eighty Only 41155.67820000001

68 9.139 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on backside of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge,all complete. each 4 7061.5 Rupees Seven Thousand SixtyOne Paise Fifty Only 28246

69 9.147B Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. 0

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 0

9.147B.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) Sqm 10.8 6690.7 Rupees Six Thousand Six Hundred Ninety Paise Seventy Only 72259.56

70 9.147D.1 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. 0

Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 0

9.147D.4 Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Sqm 45.42 9083.3 Rupees Nine Thousand EightyThree Paise Thirty Only 412563.486

71 10.37.2 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4mm aperture on both sides Sqm 15.14 656 Rupees Six Hundred FiftySix Only 9931.84

72 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. each 74 165.4 Rupees One Hundred SixtyFive Paise Fourty Only 12239.6

73 10.32 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required. 0

10.32.1 In stringers, treads landings etc. of stair cases including use of required plates wherever required all complete. Kg 150 104 Rupees One Hundred Four Only 15600

10.32.2 In gratings, frames, guard bar, ladders, railings, brackts. gates & similar works. Kg 10917.3 114.6 Rupees One Hundred Fourteen Paise Sixty Only 1251122.5799999998

74 10.35 Providing and fixing carbon steel galvanised ( minimum coating 5 micron ) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve,including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 0

10.35.1 10 x60 mm. each 20 75.1 Rupees SeventyFive Paise Ten Only 1502

10.35.2 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.10 x 80 mm. each 143 80.7 Rupees Eighty Paise Seventy Only 11540.1

75 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). Kg 713.2375000000001 546.8 Rupees Five Hundred FourtySix Paise Eighty Only 389998.265

76 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 0

8.2.2 Granite of any colour and shade 0

8.2.2.1 Area of slab upto 0.50 sqm sqm 8.7933 4242.9 Rupees Four Thousand Two Hundred FourtyTwo Paise Ninety Only 37309.09257

8.2.2.2 Area of slab over 0.50 sqm sqm 3.582 4401.2 Rupees Four Thousand Four Hundred One Paise Twenty Only 15765.098399999999

77 8.4 Extra for fixing marble/granite stone over and above coresponding basic ite, in facia and drops of width upto 150 mm with expoxy resin based (Araldite or equivalent) adhesive including cleaning etc. complete. metre 27.034999999999997 279.4 Rupees Two Hundred SeventyNine Paise Fourty Only 7553.578999999999

78 8.5 Extra for providing opening of required size & shape for wash basins/kitchen sink in kitchen platform. Vanity counters and similar location in marble/stone work including necessary holes for pillar taps etc. including rubing and polishing of cut edges etc. complete. each 18 428.2 Rupees Four Hundred TwentyEight Paise Twenty Only 7707.599999999999

79 8.1 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone finished smooth.aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and

8.10.2 Granite Stone of approved shade sqm 2.52 3542.9 Rupees Three Thousand Five Hundred FourtyTwo Paise Ninety Only 8928.108

80 11.22 Tile work in skirting, risers of steps and dado(upto 2m height) over 12mm thick bed of cement mortar 1:3(1 cement:3 coarse sand) and jointed with grey cement slurry@ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. 0

11.22.1 Marble tiles (polished) Raj nagar 8 mm thick sqm 1.0755 1532.6 Rupees One Thousand Five Hundred ThirtyTwo Paise Sixty Only 1648.3112999999998

81 11.23 Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with: 0

11.23.1 White Marble- 0

11.23.2.1 Rajnagar plain white marble 18mm thick above 0.20 sqm upto 0.50 sqm sqm 1.4339999999999997 1703.4 Rupees One Thousand Seven Hundred Three Paise Fourty Only 2442.6755999999996

82 11.24 Extra for nosing in marble stone for treads sqm 1468.4372 310.6 Rupees Three Hundred Ten Paise Sixty Only 456096.59432000003

83 11.25 Extra for marble stone flooring in treads steps and risers using single length up to 2.00m sqm 1892.9501 369.2 Rupees Three Hundred SixtyNine Paise Twenty Only 698877.17692

84 11.26 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand ) 0

11.26.1 20 to 25 mm thick sqm 272.17150000000004 1252.7 Rupees One Thousand Two Hundred FiftyTwo Paise Seventy Only 340949.23805000004

85 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. sqm 14.984100000000002 1334.9 Rupees One Thousand Three Hundred ThirtyFour Paise Ninety Only 20002.275090000003

86 11.3 40 mm thick fine dressed stone flooring over 20 mm (average) thick base with joint finished fiush:base 1:5 (1 cement: 5 coarse sand )with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.

11.30.1 Red sand stone Sqm 6706.225 849.2 Rupees Eight Hundred FourtyNine Paise Twenty Only 5694926.2700000005

87 11.31 Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab. m 57.599999999999994 82.9 Rupees EightyTwo Paise Ninety Only 4775.04

87 11.32 Extra for Kota stone / sand stone in treads of steps and risers using single up to 1.05 metre.length sqm 28.799999999999997 18.1 Rupees Eighteen Paise Ten Only 521.28

89 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sqm 209.82999999999998 795 Rupees Seven Hundred NinetyFive Only 166814.84999999998

90 11.4 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours except white , Ivory , Grey , Fume , Red , Brown , laid on 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc, complete. sqm 43.785 1414 Rupees One Thousand Four Hundred Fourteen Only 61911.99

91 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. 0

11.41.2 Size of Tile 60x60 cm sqm 215.8194 1638.8 Rupees One Thousand Six Hundred ThirtyEight Paise Eighty Only 353684.83272

92 11.41A Providing and laying Vitrified tiles in floor in different sizes {thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 0

11.41A.1.1 Double charge vitrified tile polished finish of Size of Tile 600 x 600 mm sqm 122.595 1022.7 Rupees One Thousand TwentyTwo Paise Seventy Only 125377.9065

11.41A.1.3 Double charge vitrified tile polished finish of size. Size of Tile 600 x 1200 mm sqm 31.594999999999995 1150.3 Rupees One Thousand One Hundred Fifty Paise Thirty Only 36343.72849999999

11.41A.2.2 Glazed vitrified floor tiles polished finish of size. Size of Tile 600 x 1200 mm sqm 271.92 1356 Rupees One Thousand Three Hundred FiftySix Only 368723.52

11.41A.3.1 Glazed Vitrified tiles Matt/ Antiskid finish of size. Size of Tile 600 x 600 mm sqm 55.199999999999996 1054.3 Rupees One Thousand FiftyFour Paise Thirty Only 58197.35999999999

93 11.41A Providing and laying Vitrified tiles in floor in different sizes {thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 0

11.41A.3 Glazed Vitrified tiles Matt/ Antiskid finish of size 0

11.41A.3.1 Size of Tile 600 x 600 mm sqm 6.613 1054.3 Rupees One Thousand FiftyFour Paise Thirty Only 6972.0859

11.41A.3.2 Size of Tile 600 x 1200 mm sqm 79.99249999999999 1356 Rupees One Thousand Three Hundred FiftySix Only 108469.82999999999

94 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. 0

11.46.2 Size of Tile 600 x 600 mm. sqm 39.477175 1191.8 Rupees One Thousand One Hundred NinetyOne Paise Eighty Only 47048.897165

95 11.55 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 0

11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. sqm 172.0608 2147.7 Rupees Two Thousand One Hundred FourtySeven Paise Seventy Only 369534.98016

96 11.56 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete asper the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 0

11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. sqm 10.139999999999999 3605.2 Rupees Three Thousand Six Hundred Five Paise Twenty Only 36556.727999999996

97 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. sqm 7899.7940025 283.3 Rupees Two Hundred EightyThree Paise Thirty Only 2238011.64090825

98 12.33 Providing and laying brick tiles of class designation 100 over mumty root grouted with cement mortar 1:3 (1 cement:3 coarse sand) mixed with 2% if integral water proofing compound by weight of cement, over a 12 mm layer of cement mortar 1:3 (1 cement:3 fine sand) and finished neat. 0

12.33.1 With F.P. brick tiles Sqm 242.99298046874998 471.1 Rupees Four Hundred SeventyOne Paise Ten Only 114473.99309882813

99 12.38 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement:2 coarse sand:4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3(1 cement::3 coarse sand)as per standard design 0

12.38.1 In 75x75 mm deep chase metre 121.35 66 Rupees SixtySix Only 8009.099999999999

100 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete each 7 189.4 Rupees One Hundred EightyNine Paise Fourty Only 1325.8

12.52 Grading roof for water proofing treatment with 0

12.52.2 Cement concrete 1:2:4(1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cum 12.149649023437501 3932.2 Rupees Three Thousand Nine Hundred ThirtyTwo Paise Twenty Only 47774.84988996094

101 12.55x Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. sqm 391.59749999999997 1101.6 Rupees One Thousand One Hundred One Paise Sixty Only 431383.8059999999

102 12.54X Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join,C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : 0

12.54X.2 GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of GI sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. sqm 52.8 1752.8 Rupees One Thousand Seven Hundred FiftyTwo Paise Eighty Only 92547.84

103 13.11 12mm cement plaster of mix: 0 0

13.11.4 1:6(1 cement: 6 coarse sand) sqm 962.4381500000002 141.5 Rupees One Hundred FourtyOne Paise Fifty Only 136184.99822500002

104 13.12 15 mm cement plaster on rough side of single or half brick wall of mix. 0

13.12.4 1:6(1 cement: 6 coarse sand) sqm 946.88615 162.8 Rupees One Hundred SixtyTwo Paise Eighty Only 154153.06522000002

105 13.13 20mm cement plaster of mix: 0

13.13.2 1: 4(1 cement: 4 coarse sand) sqm 3836.1493265000004 209.9 Rupees Two Hundred Nine Paise Ninety Only 805207.7436323501

13.13.4 1:6(1 cement: 6 course sand) sqm 248.03999999999996 192.1 Rupees One Hundred NinetyTwo Paise Ten Only 47648.48399999999

106 SOR 13.18 15 mm cement plaster 1:3 (1 cement: 3 coarse sand ) finished with a floating coat of neat cement on the rough side of single or half brick wall. Sqm. 31.8 229.3 Rupees Two Hundred TwentyNine Paise Thirty Only 7291.740000000001

107 13.24 6mm cement plaster to ceiling of mix: 0

13.24.1 1:3(1 cement: 3 coarse sand) sqm 412.2327 131.3 Rupees One Hundred ThirtyOne Paise Thirty Only 54126.15351000001

13.24.2 1:4( 1 cement: 4 coarse sand) sqm 632.80934259375 125.6 Rupees One Hundred TwentyFive Paise Sixty Only 79480.853429775

108 13.36 Extra for providing and mixing water proofing material in proportion recommended by the manufacturers:

13.36.4 20 mm cement plaster 1:4(1 cement: 4 sand) sqm 1144.6796000000002 10.1 Rupees Ten Paise Ten Only 11561.263960000002

13.36.6 20 mm cement plaster 1:4(1 cement: 4 sand) sqm 1342.1297264999998 10.1 Rupees Ten Paise Ten Only 13555.510237649998

109 13.40a Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. sqm 1544.1045 127.9 Rupees One Hundred TwentySeven Paise Ninety Only 197490.96555

110 13.45 Finishing walls with textured exterior paint of required shade : 0

13.45.1 New work (Two or more coats applied @ 3.28 ltr/ 10sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm sqm 79.4483715 215.2 Rupees Two Hundred Fifteen Paise Twenty Only 17097.2895468

111 13.46A Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. 0

13.46A.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm). sqm 2099.4276 132.5 Rupees One Hundred ThirtyTwo Paise Fifty Only 278174.157

112 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

13.46.1 New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sqm 1383.465 137 Rupees One Hundred ThirtySeven Only 189534.705

113 5.3 Add for plaster drip course/groove in plastered surface or moulding to R.C.C. projections. metre 87 34.2 Rupees ThirtyFour Paise Twenty Only 2975.4

114 13.92 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: 0

13.92.1 Two or more coats on new work sqm 2174.982 86.4 Rupees EightySix Paise Fourty Only 187918.4448

115 13.80 A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 3897.0711690937505 105.4 Rupees One Hundred Five Paise Fourty Only 410751.30122248136

116 13.77 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . 0

13.77.2 New work (two or more coats ) over and including priming coat with cement primer sqm 779.38434259375 102.3 Rupees One Hundred Two Paise Thirty Only 79731.01824734063

117 13.78 Applying one coat of cement primer of approved brand and manufacture on wall surface: 0

13.78.2 Distemper primer sqm 2174.982 38.7 Rupees ThirtyEight Paise Seventy Only 84171.8034

118 13.81 Applying priming coat: 0

13.81.1 With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) sqm 92.19839999999999 39.7 Rupees ThirtyNine Paise Seventy Only 3660.27648

119 13.93 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

13.93.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Sqm 3501.1475999999993 84.5 Rupees EightyFour Paise Fifty Only 295846.97219999996

120 13.94 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 0

13.94.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture sqm 230.65365 116.5 Rupees One Hundred Sixteen Paise Fifty Only 26871.150225

121 13.101.1 French spirit polishing: Two or more coats on works including a coat of wood filler. sqm 24.255000000000003 215.8 Rupees Two Hundred Fifteen Paise Eighty Only 5234.229000000001

122 13.116 Forming groove of uniform size from 12x12mm and upto 25x15mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. Metre 11 47.1 Rupees FourtySeven Paise Ten Only 518.1

123 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions.(ii) 11 nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand)mixed with water proofing compound in recommended proportion, (iii) Illrd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) Ivth course of 400 micron thick PVC sheet.(Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni). sqm 52.8 480.6 Rupees Four Hundred Eighty Paise Sixty Only 25375.68

124 22.8 Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs, balconies , terraces etc, consisting of following operations. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water -proofing compound cleaning the surface before treatment, (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50 % of cement mortar 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water froofing compound conforming to IS 2545 to reuired slope and treating similary the adjoining walls upto 300 mm height including rounding of junctions, or walls ad slabs. 0

(c) After two days of proper curing applying a secoung coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test, All above operations to be done in order and as directed and specifed by the Engineer-in-Charge. 0

22.8.1 With average thickness of 120 mm and minimum thickness at khurras point to be 65. Sqm 652.04677246875 850.7 Rupees Eight Hundred Fifty Paise Seventy Only 554696.1893391656

125 22.20.1 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5 cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. 3 mm thick. Sqm 162 472.5 Rupees Four Hundred SeventyTwo Paise Fifty Only 76545

126 22.21 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100%polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. Sqm 162 85.2 Rupees EightyFive Paise Twenty Only 13802.4

The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer- in-charge. The product performance shall carry guarantee for 10 years against any leakage. 0

22.23.1 For vertical surface two coats @0.70 kg per sqm Sqm 58.300000000000004 406.2 Rupees Four Hundred Six Paise Twenty Only 23681.460000000003

22.23.2 For horizontal surface one coat @1.10 kg per sqm. Sqm 43.785 311.5 Rupees Three Hundred Eleven Paise Fifty Only 13639.027499999998

127 21.1 Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285, anodised transparent or dyed to required shade according to IS:1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing / panelling, C.P brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): 0

21.1.1 For fixed portion 0

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 88.91999999999999 418.4 Rupees Four Hundred Eighteen Paise Fourty Only 37204.12799999999

21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 0

21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 96.50999999999999 480.2 Rupees Four Hundred Eighty Paise Twenty Only 46344.10199999999

128 21.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 0

21.2.2 Pre-laminated particle board with decorative lamination on both sides Sqm 10 826.9 Rupees Eight Hundred TwentySix Paise Ninety Only 8269

129 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 0

21.3.2 With float glass panes of 5.50 mm thickness(weight not less than 12.50 kg/sqm) sqm 67.287 1115.1 Rupees One Thousand One Hundred Fifteen Paise Ten Only 75031.7337

130 21.8.1 Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width. metre 62.599999999999994 85.2 Rupees EightyFive Paise Twenty Only 5333.5199999999995

131 26A.1 Providing and supplying aluminium extruded tubular and other aluminium sections as per the rchitectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS74,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). kg 693.0899999999999 370.4 Rupees Three Hundred Seventy Paise Fourty Only 256720.53599999996

132 26A.2 a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cumsmoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: 0

b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. 0

c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture,as per the approved sealant design, within and all around the perimeter for holding glass. 0

d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight 0

e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for 0

testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified,as per the approved shop drawings and as directed by the Engineerin-Charge. Sqm 81.53999999999999 3111.4 Rupees Three Thousand One Hundred Eleven Paise Fourty Only 253703.55599999998

133 26A.3 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. 0

(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Sqm 81.53999999999999 3377.5 Rupees Three Thousand Three Hundred SeventySeven Paise Fifty Only 275401.35

134 26A.4 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. Sqm 8.154 3309.1 Rupees Three Thousand Three Hundred Nine Paise Ten Only 26982.4014

135 21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). sqm 2.52 5143 Rupees Five Thousand One Hundred FourtyThree Only 12960.36

136 16.2 Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). Cum 91.80602006688963 11.5 Rupees Eleven Paise Fifty Only 1055.7692307692307

137 16.78 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

16.78.2 With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 Cum 288 1239.4 Rupees One Thousand Two Hundred ThirtyNine Paise Fourty Only 356947.2

138 11.79 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength,thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks,lawns, drive ways or light traffic parking etc. all complete as per manufacturer’sspecifications & direction of Engineer -in-Charge:

11.79.1 (a) 80 mm thick c.c. paver block of M-35 grade with approved colour design and pattern sqm 900 956.4 Rupees Nine Hundred FiftySix Paise Fourty Only 860760

139 16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). Cum 125.8725 7998.8 Rupees Seven Thousand Nine Hundred NinetyEight Paise Eighty Only 1006828.9530000001

A SANITARY INSTALLATION 0

140 SOR. 17.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:

17.1.1 White Vitreous china Orissa pattern W.C pan of size 580 x 440 mm with integral type foot rests. Each 3 4470.9 Rupees Four Thousand Four Hundred Seventy Paise Ninety Only 13412.699999999999

141 17.28 Provding and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete

17.28.2 Flexiable pipe

17.28.2.2 40 mm dia Each 1 104.4 Rupees One Hundred Four Paise Fourty Only 104.4

142 17.71 Provding and fixing PTMT liquid soap container 109 mm wide,125mm high and 112mm distance from wall of standard shape with bracket of same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Each 2 146.3 Rupees One Hundred FourtySix Paise Thirty Only 292.6

143 17.73 Provding and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

17.73.2 600 mm long towel rail with total length of 645mm width78mm and effective height of 88mm,weighing not less than 190 gms. Each 2 424 Rupees Four Hundred TwentyFour Only 848

144 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lif, 10 litre low level white vitreous china flushing cistern & C.P flush bend with fittings & C.I brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 0

17.3.1 W.C pan with ISI marked white solid plastic seat and lid Each 13 5504.3 Rupees Five Thousand Five Hundred Four Paise Thirty Only 71555.90000000001

145 17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions G.I. clamps, complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 0

17.4.2 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern Each 1 5733.3 Rupees Five Thousand Seven Hundred ThirtyThree Paise Thirty Only 5733.3

17.4.3 Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern Each 10 7929 Rupees Seven Thousand Nine Hundred TwentyNine Only 79290

146 8.1 Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth. 0

8.10.1 White Agaria Marble Stone Sqm 10.629999999999999 3061.2 Rupees Three Thousand SixtyOne Paise Twenty Only 32540.555999999993

147 17.31 Provding and fixing 600X450mm beveled edge mirror of superior glass complete with 6mm thick hard board ground fixed to wooden cieats with CP brass screws & washers complete. Each 15 1068.5 Rupees One Thousand SixtyEight Paise Fifty Only 16027.5

148 17.34 Provding and fixing Toilet Paper.holder 0

17.34.2 Vitreous china Each 13 332.9 Rupees Three Hundred ThirtyTwo Paise Ninety Only 4327.7

149 17.71 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. Each 15 146.3 Rupees One Hundred FourtySix Paise Thirty Only 2194.5

150 17.72 Providing and fixing PTMT towel ring trapezodial shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Each 13 204.7 Rupees Two Hundred Four Paise Seventy Only 2661.1

151 17.73 Providing and fixing PTMT towerl rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 0

17.73.1 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170 gms. Each 8 397.3 Rupees Three Hundred NinetySeven Paise Thirty Only 3178.4

B WATER SUPPLY 0

152 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 0

Internal work - Exposed on wall 0

18.7.2 20 mm Nominal outer dia pipes Metre 5 233.9 Rupees Two Hundred ThirtyThree Paise Ninety Only 1169.5

18.7.3 25 mm Nominal outer dia pipes Metre 36 317.3 Rupees Three Hundred Seventeen Paise Thirty Only 11422.800000000001

18.7.4 32 mm Nominal outer dia pipes Metre 65 395.2 Rupees Three Hundred NinetyFive Paise Twenty Only 25688

18.7.5 40 mm Nominal outer dia pipes Metre 46 538.4 Rupees Five Hundred ThirtyEight Paise Fourty Only 24766.399999999998

18.7.6 50 mm Nominal outer dia pipes Metre 114 791 Rupees Seven Hundred NinetyOne Only 90174

153 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 0

Concealed work, including cutting chases and making good the 0

18.8.1 15 mm Nominal outer dia pipes Metre 14 278.2 Rupees Two Hundred SeventyEight Paise Twenty Only 3894.7999999999997

18.8.2 20 mm Nominal outer dia pipes Metre 71 350.8 Rupees Three Hundred Fifty Paise Eighty Only 24906.8

18.8.3 25 mm Nominal outer dia pipes Metre 42 463.1 Rupees Four Hundred SixtyThree Paise Ten Only 19450.2

18.8.4 32 mm Nominal outer dia pipes Metre 26 549.8 Rupees Five Hundred FourtyNine Paise Eighty Only 14294.8

154 0.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 0

External work 0

18.9.4 32 mm nominal outer dia pipes Metre 47 359.1 Rupees Three Hundred FiftyNine Paise Ten Only 16877.7

18.1 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the wall etc. 0

18.10.2 20 mm dia. Nominal bore Metre 7 289.5 Rupees Two Hundred EightyNine Paise Fifty Only 2026.5

18.10.3 25 mm dia. Nominal bore Metre 8 399.9 Rupees Three Hundred NinetyNine Paise Ninety Only 3199.2

18.10.4 32 mm dia. Nominal bore Metre 17 457.8 Rupees Four Hundred FiftySeven Paise Eighty Only 7782.6

155 18.11 Providing & fixing G.I. pipe complete with G.I. fittings and clamps i/c making good the walls etc.concealed pipe including painting with anti corrosive bitumatic paint, cutting chases and making good the wall. 0

18.11.1 15 mm dia. Nominal bore Metre 8 318.9 Rupees Three Hundred Eighteen Paise Ninety Only 2551.2

18.11.2 20 mm dia. Nominal bore Metre 6 374 Rupees Three Hundred SeventyFour Only 2244

156 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 0

18.12.4 32 mm dia. Nominal bore Metre 15 381.7 Rupees Three Hundred EightyOne Paise Seventy Only 5725.5

157 18.13 Making connecting of G.I. distribution branch with G.I. Main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete. 0

18.13.1 25 to 40 mm Nominal bore each 1 446.7 Rupees Four Hundred FourtySix Paise Seventy Only 446.7

158 18.16 Providing and fixing brass stop cock of approved quality 0

18.16.2 20 mm Nominal bore each 4 328 Rupees Three Hundred TwentyEight Only 1312

159 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality. 0

18.17.1 25 mm Nominal bore Each 6 532.3 Rupees Five Hundred ThirtyTwo Paise Thirty Only 3193.7999999999997

18.17.2 32 mm Nominal bore Each. 12 589.9 Rupees Five Hundred EightyNine Paise Ninety Only 7078.799999999999

18.17.3 40 mm Nominal bore Each. 4 707.3 Rupees Seven Hundred Seven Paise Thirty Only 2829.2

18.17.4 50 mm Nominal bore Each. 3 878.2 Rupees Eight Hundred SeventyEight Paise Twenty Only 2634.6000000000004

160 SOR. 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality. 0

18.17.1A 20 mm Nominal bore Each. 1 465.4 Rupees Four Hundred SixtyFive Paise Fourty Only 465.4

161 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end). 0

18.19.2 32mm nominal bore 0

18.19.2.1 Horizontal Each. 1 677.6 Rupees Six Hundred SeventySeven Paise Sixty Only 677.6

18.19.2.2 Vertical Each. 2 777.9 Rupees Seven Hundred SeventySeven Paise Ninety Only 1555.8

18.19.3.2 Vertical Each. 1 777.9 Rupees Seven Hundred SeventySeven Paise Ninety Only 777.9

162 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions. 0

18.21.2 45 cm length 0

18.21.2.1 15 mm Nominal bore Each. 42 85.2 Rupees EightyFive Paise Twenty Only 3578.4

163 18.38 Painting G.I. pipe and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work 0

18.38.2 20 mm dia. Nominal bore Metre 7 13.9 Rupees Thirteen Paise Ninety Only 97.3

18.38.3 25 mm dia. Nominal bore Metre 8 18.4 Rupees Eighteen Paise Fourty Only 147.2

18.38.4 32 mm dia. Nominal bore Metre 17 21.6 Rupees TwentyOne Paise Sixty Only 367.20000000000005

164 18.46 Providing and fixing G.I. union in G.I.pipe including cutting and threading the pipe and making long screws etc. 0

18.46.2 20 mm dia. Nominal bore Each. 5 185.6 Rupees One Hundred EightyFive Paise Sixty Only 928

18.46.3 25mm dia. Nominal bore Each. 7 265.9 Rupees Two Hundred SixtyFive Paise Ninety Only 1861.2999999999997

18.46.4 32 mm dia. Nominal bore Each. 14 306 Rupees Three Hundred Six Only 4284

18.46.5 40 mm dia. Nominal bore Each. 4 419.7 Rupees Four Hundred Nineteen Paise Seventy Only 1678.8

18.46.6 50 mm dia. Nominal bore Each. 3 565.6 Rupees Five Hundred SixtyFive Paise Sixty Only 1696.8000000000002

164 18.48 Providing and placing on terrace(at all floor levels)polythethylene water storage tank ,ISI-12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank litre 3000 9.7 Rupees Nine Paise Seventy Only 29099.999999999996

C.P. BRASS FITTINGS 0

166 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS :8931. 0

18.49.1 15 mm Nominal bore Each 19 434.2 Rupees Four Hundred ThirtyFour Paise Twenty Only 8249.8

167 18.5 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 0

18.50.1 15 mm Nominal bore Each 8 715.1 Rupees Seven Hundred Fifteen Paise Ten Only 5720.8

168 18.53 Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 0

18.53.1 15 mm Nominal bore Each 27 500.4 Rupees Five Hundred Paise Fourty Only 13510.8

169 18.52 Providing and fixing C.P. brass stop cock ( concealed ) of standard design & of approved make conforming to IS 8931. 0

18.52.1 15 mm Nominal bore Each 8 594.8 Rupees Five Hundred NinetyFour Paise Eighty Only 4758.4

170 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 0

18.22.1 100 mm diameter Each 8 166.3 Rupees One Hundred SixtySix Paise Thirty Only 1330.4

171 18.58 Providing and fixing PTMT grating of approved quality and colour. 0

18.58.1 circular type 0

18.58.1.1 100 mm nominal dia, Each 2 33.2 Rupees ThirtyThree Paise Twenty Only 66.4

172 18.58.2 Rectangular type with openable circular lid 0

18.58.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating Each 43 169.7 Rupees One Hundred SixtyNine Paise Seventy Only 7297.099999999999

173 18.33 Constructing masonry Chamber 60 x 60 x 75 cm inside, in brick work in cement mortar 1:4(1 cement: 4 coarse sand) for sluice valve, with C.I surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necesary excavation, foundation concrete 1:5:10( 1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3( 1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: 0

18.33.1 With common burnt clay F.P.S (non modular) bricks of class designation 100 A Each 2 7210.6 Rupees Seven Thousand Two Hundred Ten Paise Sixty Only 14421.2

174 2.1 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m: 0

2.10.1 All kinds of soil 0

2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia Metre 237.6 391.7 Rupees Three Hundred NinetyOne Paise Seventy Only 93067.92

175 19.01 Providing, laying and jointing glazed stoneware pipes class SP-1 'A' with stiff mixture of cement mortar in the proportion of 1:1(1 cement: 1 fine sand) including testing of joints etc. complete. 0

19.1.2 150mm diameter Metre 15.6 464.3 Rupees Four Hundred SixtyFour Paise Thirty Only 7243.08

176 SOR 19.02 Providing and laying cement concrete 1:5:10( 1 cement: 5 coarse sand:10 graded stone aggregate 40mm nominal size) all-round S.W pipes including bed concrete as per standard design.

19.2.2 150mm diameter S.W pipe Metre 15.6 494.4 Rupees Four Hundred NinetyFour Paise Fourty Only 7712.639999999999

177 19.4 Providing and fixing square mouth SW gully trap grade A complete with CI grating brick masonry chamber with water tight CI cover with frame of 300X300mm size(inside) the wt. of cover to be not less than4.50kg. And frame to not less than 2.70 kg. as/standard design 0

19.4.3 180x150mmsize p type 0

19.4.3.1 With F.P.S. bricks designation 7.5 Each 13 1994.1 Rupees One Thousand Nine Hundred NinetyFour Paise Ten Only 25923.3

178 0.0 Providing and laying non -pressure NP2 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc. 0

19.6.2 150 mm dia R.C.C. pipe Metr. 222 410.7 Rupees Four Hundred Ten Paise Seventy Only 91175.4

179 19.7 Constructing brick masonry manhole in cement mortar 1:4(1 cement: 4 coarse sand) R.C.C top slab with 1:2:4 mix (1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand:8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design: 0

19.7.1 Inside size 90x80cm and 45cm deep including C.I cover with frame (light duty) 455x610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) 0

19.7.1.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 Each 17 7914.7 Rupees Seven Thousand Nine Hundred Fourteen Paise Seventy Only 134549.9

180 19.8 Extra for depth for manholes 0

19.8.1 Size 90x80cm 0

19.8.1.1 With F.P.S bricks class designation 75 Metre 1.6 5660 Rupees Five Thousand Six Hundred Sixty Only 9056

181 SOR 19.18 Supplying and fixing C.I cover without frame for manholes:

SOR 19.18.2 500 mm diameter C.I cover (medium duty) the weiht of he cover to be not less than 58 kg. Each 2 3164.6 Rupees Three Thousand One Hundred SixtyFour Paise Sixty Only 6329.2

182 19.3 Constructing brick masonry chamber for underground C.I inspection chamber and bends with 75 class designation bricks in cement mortr 1:4( 1 cement: 4 coarse sand) C.I cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) R.C.C top slab ith 1:2:4 mix ( 1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) foundtion concrete 1:5:10( 1 cement: 5 fine sand:10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: 0

19.30.1 Inside dimensions 455x610mm and 45cm deep for single pipe line: 0

19.30.1.1 With F.P.S bricks Each 25 4266.8 Rupees Four Thousand Two Hundred SixtySix Paise Eighty Only 106670

183 19.31 Extra for depth beyond 45cm of brick masonry chamber: 0

19.31.1 For 455x610mm size 0

19.31.1.1 With F.P.S bricks Metre 2.5 3946.2 Rupees Three Thousand Nine Hundred FourtySix Paise Twenty Only 9865.5

184 SOR 19.32 Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with brick of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 0

19.32.1 With F.P.S. bricks Each 5 33603.4 Rupees ThirtyThree Thousand Six Hundred Three Paise Fourty Only 168017

185 Derived (Septic Tanks) Supplying materials, labour for constructing Septic Tanks of following sizes & as per sections given in the Drawings & Designs, all complete as per specifications and direction of Engineer-in-charge. 0

Septic tank [5.0 mtr (long) x 1.5 mtr (wide) x 2.25 mtr (deep) {of inside finished size as per design & drawings}] Each 2 197517 Rupees One Lakh NinetySeven Thousand Five Hundred Seventeen Only 395034

186 Derived (Harvesting tank & Filtter pit) Rain water harvesting tank (size- 6.0 X 2.0 X 2.1 M. deep + 0.90 M. free board) capacity 25000 LITS. approx & filter pit (size- 1.20 X 0.90 X 1.20 M. deep) Each 1 504566 Rupees Five Lakh Four Thousand Five Hundred SixtySix Only 504566

D TUBE WELL X 1 NOS. 0

187 SOR 24.1 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. 0

24.1.1 All types of soil 0

24.1.1.1 300 mm dia Mtrs. 260 486.8 Rupees Four Hundred EightySix Paise Eighty Only 126568

188 SOR 24.2 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. 0

24.2.1 All types of soil 0

24.2.1.1 300 mm dia Mtrs. 60 567.9 Rupees Five Hundred SixtySeven Paise Ninety Only 34074

189 SOR 24.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 0

24.3.1 100 mm nominal size dia Mtrs. 90 546.1 Rupees Five Hundred FourtySix Paise Ten Only 49149

24.3.2 150 mm nominal size dia Mtrs. 134 660.1 Rupees Six Hundred Sixty Paise Ten Only 88453.40000000001

190 SOR 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 0

24.4.1 100 mm nominal size dia Metre 60 573.1 Rupees Five Hundred SeventyThree Paise Ten Only 34386

24.4.2 150 mm nominal dia metre 12 673.5 Rupees Six Hundred SeventyThree Paise Fifty Only 8082

191 SOR 24.5 Supplying , filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in Recharge Pit,in the required thickness ,for all leads & lifts, . all complete as per direction of Engineer-in-charge cu-m 3.18 1188.9 Rupees One Thousand One Hundred EightyEight Paise Ninety Only 3780.7020000000007

192 SOR 24.6 Supplying , filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the Recharge Pit,over the existing layer boulders in the required thickness ,for all leads & lifts, . all complete as per direction of Engineer-in-charge cu-m 6 1195.6 Rupees One Thousand One Hundred NinetyFive Paise Sixty Only 7173.599999999999

193 SOR 24.7 Supplying , filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm, in the Recharge Pit, in the required thickness over gravel layer ,for all leads & lifts, . all complete as per direction of Engineer-in-charge cu-m 3 1195.6 Rupees One Thousand One Hundred NinetyFive Paise Sixty Only 3586.7999999999997

194 SOR 24.8 Gravels packing in tubewell construction in accordance with IS 4097 including providing graval fine/medium/coarse,in required grading & sizes as per actual requirement,all complete as per direction of Engineer-in charge. cu_m 14.16 1343.2 Rupees One Thousand Three Hundred FourtyThree Paise Twenty Only 19019.712

195 SOR 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Hrs 72 916.8 Rupees Nine Hundred Sixteen Paise Eighty Only 66009.59999999999

196 SOR 24.13 Providing & fixing suitable size threaded mild steel cap or spot welded plate to the top of borewell housing/ casing pipe ,removable as per requirement,all complete for borewell of, 0

24.13.2 150 mm dia each 4 210.7 Rupees Two Hundred Ten Paise Seventy Only 842.8

197 SOR 24.14 Providing & fixing MS clamp of required dia to the top of housing/casing pipe of,removable as pe tubewell as per IS;2800(part-I), including necessary bolts & nuts of required size complete 0

24.14.2 150 mm dia each 4 1531.4 Rupees One Thousand Five Hundred ThirtyOne Paise Fourty Only 6125.6

198 SOR 24.15 Providing & fixing Bail plug/ bottom plug of required dia to the bottom of pipe assembly as per IS;2800(part-I), 0

24.15.1 100mm dia each 2 228.3 Rupees Two Hundred TwentyEight Paise Thirty Only 456.6

24.15.2 150 mm dia each 2 281.8 Rupees Two Hundred EightyOne Paise Eighty Only 563.6

E RAIN WATER PIPE 0

199 SOR 12.78 Providing and fixing on wall face PVC (working pressure 4kgf per sqm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. 0

12.78.2 110 mm diameter Metre 56 257.5 Rupees Two Hundred FiftySeven Paise Fifty Only 14420

200 SOR 12.79 Providing and fixing on wall face PVC moulded fitting / accessories for rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. 0

12.79.1 Coupler 0

12.79.1.2 110 mm Each 13 120 Rupees One Hundred Twenty Only 1560

12.79.2 Single pushfit Coupler: 0

12.79.2.2 110 mm Each 12 374.6 Rupees Three Hundred SeventyFour Paise Sixty Only 4495.200000000001

12.79.3 Single tee with door

12.79.3.2 110 x 110 x 110 mm Each 2 193.4 Rupees One Hundred NinetyThree Paise Fourty Only 386.8

12.79.5.2 110 mm bend Each 13 132 Rupees One Hundred ThirtyTwo Only 1716

12.79.6 Shoe (Plain) 0

12.79.6.2 110mm Shoe Each 1 115.95 Rupees One Hundred Fifteen Paise NinetyFive Only 115.95

201 SOR 12.80 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs, screwed with M.S screws of required length, including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete. 0

12.80.2 110 mm Each 46 182.72 Rupees One Hundred EightyTwo Paise SeventyTwo Only 8405.12

202 SOR 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. Each 13 47.9 Rupees FourtySeven Paise Ninety Only 622.6999999999999

203 23.1 Trenching in ordinary soil up to a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling within a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). Cum 1444.4759999999999 44.7 Rupees FourtyFour Paise Seventy Only 64568.0772

204 23.2 Supplying and stacking of good earth at site including royalty but excluding carriage (earth measured in stacks will be reduced by 20% for payment). Cum 1536.2820200668896 143.5 Rupees One Hundred FourtyThree Paise Fifty Only 220456.46987959865

205 23.4 Supplying and stacking at site dump manure from approved source, excluding carriage (manure measured in stacks will be reduced by 8% for payment): 0

23.4.2 Screened through sieve of I.S designation 16mm Cum 144.4476 299.4 Rupees Two Hundred NinetyNine Paise Fourty Only 43247.61143999999

206 23.5 Rough dressing the trenched ground including breaking clods. 100sqm 14.444759999999999 85.9 Rupees EightyFive Paise Ninety Only 1240.804884

207 23.6 Uprooting weeds form the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. 100sqm 14.444759999999999 283.2 Rupees Two Hundred EightyThree Paise Twenty Only 4090.7560319999993

208 23.7 Fine dressing the ground 100sqm 14.444759999999999 208.8 Rupees Two Hundred Eight Paise Eighty Only 3016.065888

209 23.8 Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/and good earth to be paid separately). Cum 1444.4759999999999 30.1 Rupees Thirty Paise Ten Only 43478.7276

210 23.9 Mixing earth and sludge or manure in proportion specified or directed. Cum 1444.4759999999999 20.9 Rupees Twenty Paise Ninety Only 30189.548399999996

211 23.1 Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days or more tili the grass forms a thick lawn free form weeds and fit for mowing including supplying good earth if needed. 0

23.10.3 In rows 5 cm apart in either direction. 100sqm 320.4648268896321 1027.4 Rupees One Thousand TwentySeven Paise Fourty Only 329245.56314640807

212 Carriage of Materials with loading & unloading:- 0

Bricks 100A(local lead 1K+7P) ‰ No. 280194.31175065006 1140.58896 Rupees One Thousand One Hundred Fourty Paise FiftyNine Only 319586.5386375898

Coarse sand cum 2002.299408129969 4219.92 Rupees Four Thousand Two Hundred Nineteen Paise NinetyTwo Only 8449543.31835582

Stone chips & GSB cum 3174.332168422669 3915.26 Rupees Three Thousand Nine Hundred Fifteen Paise TwentySix Only 12428335.76573854

Local Sand ( Lead local 1K+2P) cum 7703.616099370079 310.469152 Rupees Three Hundred Ten Paise FourtySeven Only 2391735.157704976

Good Earth lead=(1k+2p) km Cum 1444.4759999999999 314.21 Rupees Three Hundred Fourteen Paise TwentyOne Only 453868.80395999993

Sludge or Manure Lead 8km Cum 1444.4759999999999 393.79 Rupees Three Hundred NinetyThree Paise SeventyNine Only 568820.20404

213 Difference Cost of materials :- 0

Bricks 100A ‰ No. 280194.31175065006 362.63 Rupees Three Hundred SixtyTwo Paise SixtyThree Only 101606.86327013823

Cement(PSC) mt 1277.3980384246936 110.37 Rupees One Hundred Ten Paise ThirtySeven Only 140986.42150093344

214 Add For Singnorage Fee @ 10% of Basic Materials Rate (Cost Including 12% GST) 0

2602 Bricks 100A ‰ No. 280194.31175065006 543.4240000000001 Rupees Five Hundred FourtyThree Paise FourtyTwo Only 152264.31366878527

0982 Coarse sand Cum 2002.299408129969 19.6896 Rupees Nineteen Paise SixtyNine Only 39424.474426315835

0297 Stone Chips (10mm ) Cum 2886.332168422669 73.68592000000001 Rupees SeventyThree Paise SixtyNine Only 212682.04125581935

6501 Local Sand Cum 2575.616099370079 15.887200000000002 Rupees Fifteen Paise EightyNine Only 40919.32809391233

Add 5.36 % GST on SOR Item as per BCD 5538670.96154003

215 DSR 5.14 Providing and Displaying Cycus revoluta in 35 cm challi, specimen , having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge Each 25 1183.9 Rupees One Thousand One Hundred EightyThree Paise Ninety Only 29597.500000000004

216 DSR 7.69 Providing and stacking of Plumeria alba of height 120-135 cm. with 2-3 branches in bags of size 30 cm as per direction of the officer-in-charge. Each 30 120 Rupees One Hundred Twenty Only 3600

217 DSR 5.33 Providing and Displaying Golden Bottle brush Topiary well developed with fresh & healthy foliage 5 to 6 big ball 115 to 180 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge Each 30 973.75 Rupees Nine Hundred SeventyThree Paise SeventyFive Only 29212.5

218 DSR4.79 Providing and Displaying Portulaca hybrid in different colour with bloom well developed fresh & healthy in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge Each 20 86.1 Rupees EightySix Paise Ten Only 1722

219 DSR 6.31 Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge Each 25 15 Rupees Fifteen Only 375

220 DSR 6.28 Providing and stacking of Syngonium variegated,of height 20-30 cm. with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 15 cm. as per direction of the officer-in-charge Each 50 21 Rupees TwentyOne Only 1050

221 2.25 Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. Sor Rate is -107.20 Less -12% GST. Kl 9600 95.71428571428571 Rupees NinetyFive Paise SeventyOne Only 918857.1428571428

222 5.1.27 Earth work in excavation of foundation trenches in ordinary soil (vide classification of soil item A ) and disposal of excavated earth so obtained to a distance up to 50 M and average lift of 1.5 M including leveling , ramming the foundation trenches, removing the roots of shrubs etc. all complete and as per specifications and direction of E/I. cum 148.79999999999998 189.6 Rupees One Hundred EightyNine Paise Sixty Only 28212.479999999996

223 5.7.21.2 Providing and L/C for Boulder crating duly packed(Materials within 50m Lead ) on Apron & slope of Bank in G.I. Wire crate including supply of G.I. Wire crate(3.0m x 1.50m x 0.60m) & 150mm square mesh made out of G.I. Wire 8 to 10 S.W.G. double knot at each joint in box type and with all cost of carriage, tax and royalty of stone boulder including carriage of materials from Mirzachowki to site with all complete job as per specification. Each 66 11861.9 Rupees Eleven Thousand Eight Hundred SixtyOne Paise Ninety Only 782885.4

224 Carraige of material(sewage material/silt) by Tractor lead 3 km K cum 7680 216 Rupees Two Hundred Sixteen Only 1658880

225 MR + WRD Analysis Providing hydraulic exvavator 15m long boom of 1 m3 bucket (output capacity 60 m3/hour) at site on bourly use rate basis including cost of POL (fuel), running, maintenance, operation charges including wages of operator with all costs & taxes and royalty for removal of daldal and sewage materials from bed and side slope of Nala. Per Hour 220 3013.40775 Rupees Three Thousand Thirteen Paise FourtyOne Only 662949.705

226 MR + WRD Analysis Providing hydraulic excavator of 1 m3 bucket(output capacity 60 m3/hour) at site on hourly use rate basis includng cost of POL( fuel), running, maintenance, operation charges including wages of operator with all costs & taxes and royalty for removal of daldal and sewage materials from bed and side slope of Nala. Per Hour 146 2612.8 Rupees Two Thousand Six Hundred Twelve Paise Eighty Only 381468.80000000005

227 MR + WRD Analysis Removal of Aquatic grass from bed and side slope of Nalas by ordinary labourers Sqm 5790 653.6003271068263 Rupees Six Hundred FiftyThree Paise Sixty Only 3784345.8939485243

Add @1% Labour Cess 48287.643989485245

SUPPLY & INSTALLATION OF FIXTURES 0

228 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 35 2482 Rupees Two Thousand Four Hundred EightyTwo Only 86870

229 8.16 Supply and Installation of regular / standard model A.C. ceiling fan of 1200 mm sweep including wiring the down rod of standard length (upto 30cm) with 1.5 sq.mm FR PVC insulated copper conductor, single core cable etc. as required. Each 6 2838 Rupees Two Thousand Eight Hundred ThirtyEight Only 17028

230 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as required Each 41 358 Rupees Three Hundred FiftyEight Only 14678

231 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0

8.17.1 300 mm sweep Each 14 2572 Rupees Two Thousand Five Hundred SeventyTwo Only 36008

232 5.2 Supplying and fixing 2'X9 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. Each 8 492 Rupees Four Hundred NinetyTwo Only 3936

233 5.3 Supplying and fixing 4'x20 watt LED batten with minimum efficacy 100lm/w in aluminoum housing and complete with integrated electronic driver etc. directly on ceiling / wall including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor single core cable etc. as required. Each 54 762 Rupees Seven Hundred SixtyTwo Only 41148

234 5.6 Supplying and fixing following types aluminium extruded suspended type LED luminaire with minimum efficacy 100 lm/w ensuring uniform and continuous illumination including suspension system complete with electronic driver etc and connection with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 0

5.6.2 4' long X 35/40 watt Each 5 4587 Rupees Four Thousand Five Hundred EightySeven Only 22935

235 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

5.8.2 15Watt Each 74 1608 Rupees One Thousand Six Hundred Eight Only 118992

5.8.3 18 watt Each 50 1694 Rupees One Thousand Six Hundred NinetyFour Only 84700

236 5.9.4 Supplying and fixing single wall mounted 9/10watt (2 ft. long) LED type batten fitting complete with electronic driver and LED tube etc. directly on wall including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor single core cable and earthing the body etc. as required. (Mirror Light) Each 7 589 Rupees Five Hundred EightyNine Only 4123

237 1.34 Supplying and fixing batten / angle holder including connections etc. as required. Each 44 80 Rupees Eighty Only 3520

238 6.1 Supplying and fixing following types lamp in existing electrical fitting/ fixture etc as required. 0

6.1.5 12 watt LED lamp Each 15 239 Rupees Two Hundred ThirtyNine Only 3585

6.1.6 15 watt LED lamp Each 29 250 Rupees Two Hundred Fifty Only 7250

239 5.1 Supplying and fixing 10/12 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,IP 65 protection and complete with integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. Each 20 1275 Rupees One Thousand Two Hundred SeventyFive Only 25500

240 1.33 Supplying and fixing 2 pin 5 Amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Each 77 64 Rupees SixtyFour Only 4928

241 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps moduler socket outlet & 6A modular type switch connection etc. as required. Each 89 414 Rupees Four Hundred Fourteen Only 36846

242 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/ 16 amps moduler socket outlet & 15/16A modular type switch connection etc. as required. Each 37 531 Rupees Five Hundred ThirtyOne Only 19647

243 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. Each 8 683 Rupees Six Hundred EightyThree Only 5464

244 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 0

1.24.6 Telephone socket outlet Each 20 131 Rupees One Hundred ThirtyOne Only 2620

245 1.27 Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches/ socket/TV / Telephone outlet in surface/ recess etc. as required. 0

1.27.1 75mmX75mmX50mm Each 20 234 Rupees Two Hundred ThirtyFour Only 4680

246 MP PWD 38.4 Supply, installation testing and commissioning of telephone tag block krone connector with enclosure complete as mentioned below 0

MP PWD 38.4.1 10 Pair Each 1 817.74 Rupees Eight Hundred Seventeen Paise SeventyFour Only 817.74

247 1.26 Supplying and fixing modular blanking plate on the existing modular plate & metal box excluding modular plate, etc. as required. Each 25 34 Rupees ThirtyFour Only 850

248 Supplying and fixing metal/ PVC box of following sizes ( nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required. 0

1.22.1 75mmX75mmX50mm deep Each 10 139 Rupees One Hundred ThirtyNine Only 1390

1.22.6 200mmX150mmX60mm deep Each 6 276 Rupees Two Hundred SeventySix Only 1656

249 1.3 Wiring for light point/ fan point/ exhaust fan point / call bell point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch , modular plate suitable size G.I. box etc as required. 0

1.3.1 Group A Point 47 782 Rupees Seven Hundred EightyTwo Only 36754

1.3.3 Group C Point 241 1146 Rupees One Thousand One Hundred FourtySix Only 276186

250 Wiring for group controlled (looped) light point/ fan point/ exhaust fan point / call bell point (without independent Switch etc.) with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit etc as required. 0

1.59.3 Group C Point 25 609 Rupees Six Hundred Nine Only 15225

251 1.5 Wiring for power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No.4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as required Meter 719 309 Rupees Three Hundred Nine Only 222171

252 1.7 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 1032 246 Rupees Two Hundred FourtySix Only 253872

1.7.4 Wiring for submain with 2x6 sq.mm +1X6 sq mm earth wire FRLS PVC insulated copper conductor single core cable in recessed PVC conduit as required. Meter 390 422 Rupees Four Hundred TwentyTwo Only 164580

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire Meter 80 660 Rupees Six Hundred Sixty Only 52800

1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire Meter 80 925 Rupees Nine Hundred TwentyFive Only 74000

253 Supplying & fixing of following size medium class PVC conduit along with accessories in surface/ recess including cutting of wall and making good the same in case of recessed conduit as required. 0

1.21.1 20 mm dia Meter 510 102 Rupees One Hundred Two Only 52020

254 1.16 Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed PVC conduit as required. 0

1.16.2 2 Pair Meter 510 31 Rupees ThirtyOne Only 15810

255 MP PWD 38.3 Supply installation, testingand commissioningof 0.5mm size solid annealed copper, jelly filled telephone cables, polythene insulated, petroleum jelly filledwithpoly-al laminatemoisturebarrier, polythene sheathed, armoured polythene jacketed telephone cables as per DOT specifications of following sizes 0

256 MP PWD 38.3.1 10 Pair Meter 30 204.14 Rupees Two Hundred Four Paise Fourteen Only 6124.2

MAIN PANEL & D.B.s

257 2.1.5 63 Amp, TP&N Each 1 6482 Rupees Six Thousand Four Hundred EightyTwo Only 6482

258 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus -bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0

2.9.1 4 way ( 4 + 12 ), Double door, horizontal type Each 2 4148 Rupees Four Thousand One Hundred FourtyEight Only 8296

2.9.2 6 way ( 4 + 18 ), Double door, horizontal type Each 2 5132 Rupees Five Thousand One Hundred ThirtyTwo Only 10264

259 2.32 Supplying and fixing cable end box ( Loose wire box , IP 43) suitable for following sheet steel M.C.B. Distribution board, on surface/ recess, complete with testing commissioning etc. as required 0

2.32.4 For 4 way Double door MCB TPN DB Each 2 1064 Rupees One Thousand SixtyFour Only 2128

2.32.5 For 6 way Double door MCB TPN DB Each 2 1111 Rupees One Thousand One Hundred Eleven Only 2222

260 Supplying and fixing of following rating C series MCB suitable for inductive and other loads of following poles in the existing MCB DB complete witth connections ,testing and commissioning etc. as required . 0

2.12.1 6 Amp. To 32 Amp. SP MCB 240 Volt Each 104 237 Rupees Two Hundred ThirtySeven Only 24648

2.12.4 32 Amp TPN MCB 415 Volt Each 2 1282 Rupees One Thousand Two Hundred EightyTwo Only 2564

2.12.8 40 TPN MCB 415 Volt Each 2 2329 Rupees Two Thousand Three Hundred TwentyNine Only 4658

261 2.14 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 10 13 Rupees Thirteen Only 130

MAIN L.T. PANEL 0

262 8.12 Supplying and fixing of floor mounted out door feeder pillar cubicle type panel board fabricated with 14 guage iron sheet suitable for panel mounted switch disconnector, /MCCB and complete with busbar chamber, insulator, nut-bolt with MS 40x40x5 mm angle stand and complete with powder painting etc as required. (But without busbar copper strip. MCCB,& PCC work) Sft 6 2261 Rupees Two Thousand Two Hundred SixtyOne Only 13566

263 8.11 Supplying and fixing of fabricated Electrical control panel of cubical contruction, wall/floor mounted type fabricated out of 16 SWG CRCA iron sheet compartmentalised with hinged door, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley,internal wiring, earth terminals, busbar chamber, insulator,and complete in all respect etc. and panel manufactures must be approved by CPRI. etc as required. (But without RYB indicator, ammeter, voltmeter, inter-connection copper cable, /solid copper strip, switchgears etc.) Sft 22 1809 Rupees One Thousand Eight Hundred Nine Only 39798

264 Providing and fixing of following rating electrical items in existing cubical panel including drilling holes in if required, making connections etc. as required . 0

2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required 0

2.4.8 100Amp 30 KA FP 415 volt MCCB Each 1 46109 Rupees FourtySix Thousand One Hundred Nine Only 46109

2.7.1 (ii) 40 Amp, 4 pole changeover switch . Each 1 7135 Rupees Seven Thousand One Hundred ThirtyFive Only 7135

2.7.3 100 A four pole ON-load panel mounted changeover switch Each 1 49446 Rupees FourtyNine Thousand Four Hundred FourtySix Only 49446

265 2.8.3 Supplying and fixing 2+6 way double door single pole and Neutral sheet steel M.C.B. D.B, 240 Volts in surface/ recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar , detachable gland plate, interconnection phosphatised and powder painted including , earthing etc. as required( But without MCB/RCCB/ Isolator) Each 11 1713 Rupees One Thousand Seven Hundred Thirteen Only 18843

266 2.8.4 Supplying and fixing 2+10 way double door single pole and Neutral sheet steel M.C.B. D.B, 240 Volts in surface/ recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar , detachable gland plate, interconnection phosphatised and powder painted including , earthing etc. as required( But without MCB/RCCB/ Isolator) Each 1 1972 Rupees One Thousand Nine Hundred SeventyTwo Only 1972

267 2.8.5 Supplying and fixing 6 way double door sinle pole and Neutral sheet steel M.C.B. D.B, 240 Volts in recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar , detachable gland plate, interconnection, phosphatized and powder painted including nting, earthing etc. as required ( But without MCB/ RCCB/Isolator) Each 2 2197 Rupees Two Thousand One Hundred NinetySeven Only 4394

2.12.1 6 Amp. To 32 Amp. SP MCB 240 Volt Each 11 237 Rupees Two Hundred ThirtySeven Only 2607

2.12.4 32 Amp TPN MCB 415 Volt Each 4 1282 Rupees One Thousand Two Hundred EightyTwo Only 5128

2.12.8 40 Amp TPN MCB 415 Volt Each 4 2329 Rupees Two Thousand Three Hundred TwentyNine Only 9316

2.12.2 32 Amp SPN MCB 240 Volt Each 30 606 Rupees Six Hundred Six Only 18180

Miscellaneous 0

268 8.13 Supplying and fixing panel mounted digital multimeter (voltmeter and ammeter) including CT coil and RYB pilot indicator in the existing cubical panel board including drilling holes in the panel board making connections etd as required Each 2 6536 Rupees Six Thousand Five Hundred ThirtySix Only 13072

1830+anal. Copper strip of all sizes. Kg 13 908 Rupees Nine Hundred Eight Only 11804

269 2.2 Providing and fixing MV danger notice plate of 200mmX150mm made of mild steel at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side etc as required. Each 2 214 Rupees Two Hundred Fourteen Only 428

270 DSR EnM 2025 40.3 Supplying Installation Testing and Commissioning of 4MP IP IR Dome Camera having following specifications and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 0

DSR EnM 2025 40.3 3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120dB or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6) Video Streaming & Frame Rates :- Triple streaming , configurable Main stream: 4MP (2560×1440)25/30fps , Sub streams minimum: 720P@25/30 fps 7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, video encryption, IP/MAC filtering, HTTPS, trusted upgrade 9) Onboard Storage: Camera should support built-in Micro SD/ SDHC/ SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 10) Recording Management: Format SD, overwrite, storage management, video to NAS device, 11) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast, 0

DSR EnM 2025 40.3 13) System Capability: ONVIF, Camera shall support open source VMS 14) Ethernet: 1 RJ 45 10/100 Ethernet port 15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement. 16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 17) Power Requirement: 12VDC/24 VDC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body 19) Operating Condition:- Ambient Temperature:- (- )05°C to 50°C, humidity 95% (max) (non-condensing) 20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS 0

40.3.1 4MP @ 25/30fps@1440P (2560 x 1440) Dome Camera with 2.8/ 3.6/ 6/8/12 mm fixed lens (as per site requirement). Each 2 10365 Rupees Ten Thousand Three Hundred SixtyFive Only 20730

271 DSR EnM 2025 40.4 Supplying Installation Testing and Commissioning of 4MP IP IR Outdoor Bullet Camera having following specifications and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control,White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 0

DSR EnM 2025 40.4 3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120dB or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6) Video Streaming & Frame Rates :- Triple streaming , configurable Main stream: 4MP (2560×1440)25/30fps Sub streams minimum: 720P@25/30 fps 7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, video encryption, IP/MAC filtering, HTTPS, trusted upgrade 9) Onboard Storage: Camera should support built-in Micro SD/ SDHC/ SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 10) Recording Management: Format SD, overwrite, storage management, video to NAS device, 11) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast, 0

DSR EnM 2025 40.4 13) System Capability: ONVIF, Camera shall support open source VMS 14) Ethernet: 1 RJ 45 10/100 Ethernet port 15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement. 16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 17) Power Requirement: 12VDC/24 VDC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body 19) Operating Condition:- Ambient Temperature:- (- )05°C to 50°C, humidity 95% (max) (non-condensing) 20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS 0

40.4.1 4MP @ 25/30fps@1440P (2560 x 1440) Outdoor Bullet Camera with 2.8/ 3.6/6/8/12 mm fixed lens (as per site requirement) Each 8 10063 Rupees Ten Thousand SixtyThree Only 80504

272 DSR 2025 39.23 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. 0

39.23.1 6U Rack Each 1 6939 Rupees Six Thousand Nine Hundred ThirtyNine Only 6939

273 1.58.1 Supplying and drawing of UTP 4 Pair CAT-6 LAN cable in the existing surface / recessed PVC concuit etc. as required. Meter 200 52 Rupees FiftyTwo Only 10400

274 1.21 Supplying & fixing of following size medium class PVC conduit along with accessories in surface/ recess including cutting of wall and making good the same in case of recessed conduit as required. 0

1.21.1 20 mm dia Meter 200 102 Rupees One Hundred Two Only 20400

275 DSR EnM 2025 40.10 Supplying Installation Testing and Commissioning of following Channel Network Video Recorder (NVR) with camera licenses to record for all channels having specifications and features etc as mentioned below : 1) Network Video Recorder Embedded/ Installed OS (Linux) along with Camera Licenses for number of channels of NVR to record per NVR and to provide a live view, storage and simultaneously Multi-channel playback of all IP, IR camera or more and must be ONVIF with minimum support of 256Mbps incoming Bandwidth 2) NVR should support H.265 or better, H.264, MJPEG, MPEG4 support 3) Must support 1 channel Input, 1 channel Output, RCA for Two-way Talk 4) Intelligent auto power on when power resumes after power outage. 5) Storage: It should support minimum 2 SATA Slots with 20TB capacity/ Slot. 6) Connectivity Interface : 1 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x RS232 7) Backup Interface : Its should have 2 Nosx USB port (1x USB3.0, 1xUSB2.0) 8) Video Output Ports: 1x HDMI and 1 VGA 9) Alarm Ports: It should have 4/1 Ch In/ Out ports to connect various type of external sensors and output devices like hooter/ Siren etc. 0

DSR EnM 2025 40.10 10) Email & SMS Altert options: Option for SMS/ Email Alerts to minimum 5 designated mobile number for power failure, HDD failure, vandalism, tempring, network disconnection and panic 11) Web & Mobile Application: Web, Mobile app ( For iPhone, iPad, Android Phone) for alerts and viewing. 12) Protocols: HTTP, HTTPS, TCP/IP, IPv4, UDP, NTP, DHCP, DNS, SMTP, UPnP, DDNS, Alarm Server, IP Search, Multicast, Auto Registration, ONVIF (Profile T, Profile S, Profile G), CGI, SDK and OEM Cloud for remote monitoring without any public IP need. 13) Standards: CE, FCC, RoHS and BIS Certified 14) Power Supply : Should support 12VDC, 4Amp or AC100-240V, 50/60Hz Power supply. 15) Operating Condition : Ambient Temperature (-5°C to 50°C), humidity 90% (max) (non-condensing) 16) The VMS, NVR application shall support all the features & functionalities of the offered cameras. 17) VMS should consist of Base license and Channel Licenses. VMS should be provided with camera Licenses , with no dependency of VMS licenses by binding with the MAC address of the cameras to achieve the functionality. 18) The NVR OEM shall be responsible for providing a mobile application compatible with both Android and iOS devices, enabling remote monitoring and playback of cameras/NVR footage. 0

DSR EnM 2025 40.10 19) The OEM must provide its own DDNS server hosted in India, eliminating the need for a public IP address for remote monitoring over the Internet. 20) Must support Resolution: 7680x4320 (8K), 3840*2160, 1920×1080, 1280×1024,1280×720, 1024×768 21) Must support recording resolution upto 32MP 22) Must support Continuous, Alarm, Motion, Instant, Panic Recording Mode 23) When alarm recording is enabled and an event occurs, you can click the alarm icon on monitoring page to view the alert details. The snapshot function is supported on monitoring and playback page 24) The Network Video Recorder (NVR) shall be configured to send email whenever a system message is created or an alarm event occurs. The email server shall be a valid SMTP server. Each recipient email address shall be configured to receive any combination of critical, warning, or informational messages or alarm notifications. When an alarm occurs, the email message includes the NVR name, time of alarm and a list of camera that is configured to record upon alarm. 25) It should support Network Support: HTTP, TCP/IP, SMTP, DHCP, DNS, DDNS, FTP, NTP, UPnP, Multi IP Setting. Convert multiple recording files to one avi/MP4 file. 26) General AI Based Search: Search Pictures by channel, time, event type, target classification (Fall Detection, People Approach Detection, People No. Exception Detection, People Staying Detection, Violence Detection. 0

DSR EnM 2025 40.10 27) Alarm Notifications based on: Motion detection, video tampering, video loss, scene changing, PIR alarm, Camera external alarm, Face detection, face recognition, perimeter protection (intrusion and tripwire), ANPR, people counting, stereo analysis, crowd distribution, heat map, Disk Full, Storage Error, IP Conflict and abnormal behavior of fan 28) Alarm Notification should be linked with Recording, snapshots, Camera external alarm output, buzzer, logs, presets and email. 29) Built-In Artificial Intelligence: NVR should have built-in AI :- - 2 Channel face detection and recognition, - Minimum 4 Channel perimeter protection, - Minimum 8 Channel Smart Motion Detection 30) Face Recognition Database Capacity: It should support total Blacklist and Whitelist capacity of Minimum 20,000 Faces or more with Face Detection speed of 12 face images/sec. 31) Face & Human Attributes Search: Search Pictures/ Video by Gender, age group, glasses, expressions, face mask, beard, Top color, top type, hat, bag, age, gender and umbrella. 32) ANPR Capability: It should support ANPR Camera with License plate, plate color, vehicle body, vehicle model, vehicle logo, calling, seatbelt, vehicle registration location etc vehicle attributes. 0

DSR EnM 2025 40.10 33) Alarm Notifications based on: Motion detection, video tampering, video loss, scene changing, PIR alarm, Camera external alarm, Face detection, face recognition, perimeter protection (intrusion and tripwire), ANPR, people counting, stereo analysis, crowd distribution, heat map, Disk Full, Storage Error, IP Conflict and abnormal behavior of fan, cybersecurity exception 34) Alarm Notification should be linked with Recording, snapshots, Camera external alarm output, buzzer, logs, presets and email. 35) General AI Based Search: Search Pictures by channel, time, event type, target classification (Fall Detection, People Approach Detection, People No. Exception Detection, People Staying Detection, Violence Detection. 36) Smart playback function: Should support smart search for the selected area in the video and smart playback to improve the playback efficiency 37) VCA (Video Content Analytic): Should support multiple video contented analytics based on camera analytics 0

40.10.2 16 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9/16, 2nd screen: 1/4/8/9/16 Each 1 12799 Rupees Twelve Thousand Seven Hundred NinetyNine Only 12799

276 DSR EnM 2025 40.12 Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications. 0

40.12.1 4TB (Terabytes) Each 1 13943 Rupees Thirteen Thousand Nine Hundred FourtyThree Only 13943

277 DSR EnM 2025 39.3 Supplying, installation, Testing and commissioning of following capacity 24 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: At least 24 X RJ-45 Gigabit Ethernet Ports and additional 2 X 10G Base -T with 4 X SFP Ports with non-blocking architecture by having Switching capacity of min. 168Gbps and packet forwarding rate of 125Mpps or higher, 16K MAC table. Console Port, USB port, Stacking support of min. 8 units per stack. Internal dual AC Power supply, STP, RSTP, MSTP, BPDU Filter, BPDU Restriction, Min. 9K Jumbo Frame, LBD, IGMP Snooping V1/V2/V3, MLD Snopping V1/V2. IGMP /MLD Groups 1K or more, IPv4/IPv6 Loopback Interface, 16 L3 IP Interface, Ipv6 ND, VRRPv3, UDP Helper, ECMP. VLAN: 802.1Ǫ, Port based, Ǫ-in-Ǫ, Multicast VLAN, Protocol VLAN, VLAN Trunking, DHCP Snopping, Server, server Screening. RADIUS , TACACS+ Authentication, ǪoS: 802.1P, 8 queues per port, ǪoS : WRR, Strict+WRR, WRED, 802.1p. ACL: MAC based, IPv4C IPv6, TCP/UDP Port number, time based ACL, TFTP Client, SNMP V1, v2c, v3, SNMP traps, RMON, DHCP server, relay, client, LLDP, LLDP-MED, OAM, Dying Gasp, 802.3ah, sflow, RIP, OSPF v2/v3, policy based route, SSL, SSH. 6 kV surge protection on all Gigabit Ethernet ports and on all GE RJ-45 access ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required. 0

39.3.1 24 port PoE Layer 2 Network Switch with PoE Support of 370W or higher with each copper port supporting 802.3at PoE+ min. Each 1 125393 Rupees One Lakh TwentyFive Thousand Three Hundred NinetyThree Only 125393

278 42.4 Supplying, Installation, Testing and Commissioning of following size LED display (LED monitor) industrial grade with 3840x2160 resolution or better, USB playback, bluetooth and miracast connectivity, 4X HDMI 2.0, DP 1.2, HDR 10/10+, brightness: 500-nits or better, Video wall mode should be available, contrast ratio: 1200:1, OPS slot, viewing angle (H/V): 170°/ 170°, response time less than 12ms, Display control shall be on monitor screen and programmable with remote (remote shall be supplied with system), Key Board, Optical Mouse, etc. as required. 0

42.4.3 55 inch or larger Each 1 82057 Rupees EightyTwo Thousand FiftySeven Only 82057

SUPPLY & LAYING OF UNDER GROUND CABLE 0

279 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0

7.7.4 (A) 4 core 10 sq mm Meter 60 249 Rupees Two Hundred FourtyNine Only 14940

7.7.9 50 sq. mm, 3.5 core Meter 80 561 Rupees Five Hundred SixtyOne Only 44880

280 7.1 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as reqd. 0

7.1.1 (a) Up to 35 sq mm Meter 82.5 315 Rupees Three Hundred Fifteen Only 25987.5

7.1.2 Above 35 sq. mm and upto 95 sq. mm Meter 60 326 Rupees Three Hundred TwentySix Only 19560

281 7.4 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 0

7.4.1 (a) Up to 35 sq mm(clamp with 1 mm saddle) Meter 20 43 Rupees FourtyThree Only 860

7.4.2 Above 35 sq. mm and upto 95 sq. mm (Clamped with 25 x 3 mm MS flat clamp) Meter 10 109 Rupees One Hundred Nine Only 1090

282 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of of 1.1 KV grade of following size in the existing RCC/ HUME/METAL pipe etc. as required. 0

7.5.1 (a) Up to 35 sq mm Meter 10 37 Rupees ThirtySeven Only 370

283 DSR 2022 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as reguired.

9.1.20 (a) 3.5 Core 25 sq mm Set 2 313 Rupees Three Hundred Thirteen Only 626

9.1.32 (a) 4 Core 10 sq mm (25mm) Set 2 269 Rupees Two Hundred SixtyNine Only 538

284 9.1 Excavation for foundation in soft soil including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil directed within lead of 50 metres. Cum 2 240 Rupees Two Hundred Fourty Only 480

285 9.7 Providing and laying in position cement concrete 1:2:4 ( 1: cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size )in foundation of pump DG set , feeder pillar and refilling etc. as required Cum 2 8370 Rupees Eight Thousand Three Hundred Seventy Only 16740

286 2.2 Providing and fixing MV danger notice plate of 200mmX150mm made of mild steel at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side etc as required. Each 1 214 Rupees Two Hundred Fourteen Only 214

287 9.2 Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres. Cum 11 242 Rupees Two Hundred FourtyTwo Only 2662

288 9.3 Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 metres. Cum 6 155 Rupees One Hundred FiftyFive Only 930

289 9.14 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. In the existing trench, complete as required. 0

9.14.4 160 mm dia (OD- 160 mm &ID 135mm nominal) Meter 5 371 Rupees Three Hundred SeventyOne Only 1855

9.14.1 63 mm dia (OD-63 mm & ID-51 mm nominal) Meter 10 128 Rupees One Hundred TwentyEight Only 1280

290 10.5 Laying of one number PVC insulated and PVC sheathed aluminium conductor cable of1.1 KV grade of following size in the existing RCC/ HUME/METAL pipe etc. as required. 0

10.5.2 Above 35 sq. mm and upto 95 sq. mm M 10 170 Rupees One Hundred Seventy Only 1700

291 2025 11.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as reguired. 0

11.1.22 3½ X 50 sq. mm (35mm) Set 4 1336 Rupees One Thousand Three Hundred ThirtySix Only 5344

292 3.2 Earthling with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. Set 4 6323 Rupees Six Thousand Three Hundred TwentyThree Only 25292

293 3.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. Set 1 6884 Rupees Six Thousand Eight Hundred EightyFour Only 6884

294 3.11 Supplying and laying 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode, including connection with G.I. nut, bolt, spring, washer excavation and refilling etc. as required. Meter 60 721 Rupees Seven Hundred TwentyOne Only 43260

295 3.12 Providing and laying earth connections from earth electode with 6 SWG dia G.I. wire in 15 mm. Dia G.I.pipe from earth electrode including connection with G.I. thimble excavation and refilling etc. as required. Meter 15 278 Rupees Two Hundred SeventyEight Only 4170

296 3.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble as required. Meter 105 37 Rupees ThirtySeven Only 3885

297 3.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing etc. as required. Meter 52.5 53 Rupees FiftyThree Only 2782.5

BILL OF QUANTITY FOR NON SOR ITEMS

TOURIST DEVELOPMENT OF VISHWAMITRA PLACE, VISAUL, LOCATED IN HARLAKHI BLOCK UNDER MADHUBANI DISTRICT.

Bill of Quantity

(Each Item rate must be filled)

S.NO S.NO/SOR Description of Work Unit Qnty Amount (Rs.)

298 MR Finishing exterior walls with Ceramic textured finish with protection coating by Ultratech Texture Paints (UTTPL) ( Natural - Ceramic/ Stony of approved shade or approved equivalent make) to external wall surfaces comprising of water-borne, penetrating, water repellent EM- primer & super durable water based acrylic silicon resin clear and super durable dirt and dust resistant protection coat of FSI Clear coat, which shall be highly water repellant, Anti-algae & anti-fungal in nature.

The coating shall also cover hairline cracks with application method which includes 2 coats of E M Primer, 2 coats (Silmultaneouly) of 100% natural Ceramic & granite crushed stone , all in approved colour and texture including preparation of surface, appropriate primer coat etc. applied as per manufacturer's instructions complete & project consultant instructions, allow for scaffolding, staging as required. The finish shall be natural colour/ non pigmented, water repellant, resistant to condensate formation, cover hairline cracks/ crazing, UV & alkali resistant & ensure good breathability for the substrate all to complete as per direction of Engineer-in-charge. sqm 542.332

299 MR Providing and laying CBL1 Tettenhall Red Linea Bricks Size- 300X40X17 mm Tile cladding on walls laid over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the Tile shade including filling / grouting and finishing complete as per direction of Engineer-in-charge. sqm 120.07049999999997

300 MR Providing and fixing Stainless steel 304 Grade H- type pull handle of size min 32 mm dia and 1200mm long of approved make including SS screws, including making holes of required size in shutter etc. complete as per direction of Engineer-in-Charge. sqm 2

301 MR Providing and fixing SS Bottom patch Lock with cylinder of approved make including necessary screws etc. all complete. sqm 1

302 MR Providing and fixing SS floor mounted half dome door stopper of dia 45mm including necessary screws etc. all complete. sqm 2

303 MR Providing and fixing in position exterior/interior Glass Fiber Reinforced Concrete (GFRC/GRC) cladding panels of specified thickness, size, and design. The panels shall be manufactured using Alkali Resistant (AR) glass fibers, white/grey cement, fine aggregates, and approved admixtures. The rate includes making provision for concealed embedded anchors, brackets, expansion bolts, and stainless steel (SS) fasteners. The item also includes filling joints with approved weather-proof sealants/polysulfide or polyurethane sealants and backer rods, along with applying a primer and weather-coat over the panels as approved by the Engineer-in-Charge. All complete as per architectural drawings and manufacturer's specifications. sqm 94.5728

304 MR Providing and fixing counter basin size- (mm) 190x550x430 (Jaquar,CAT NO- FLS-wht-5701) including fixing and all accessories as per manufacturers specification and direction of Engineer-in-charge. Each 15

305 MR Provding and fixing PVC Soil ,Waste & vent pipes all complete

110 mm dia metre 176

40 mm dia metre 66

306 MR Provding and fixing PVC fittings all complete as/specification & directionof E/I

110 mm vent cowel Each 6

110 mm plain bend Each 52

110 mm door bend Each 33

110 mm dia X 45 Bend Each 11

110 X 110 mm dia plain - y Each 26

110 mm pipe clip Each 20

110 mm pipe clip Each 8

110 X110 mm dia p-trap Each 43

40 mm elbow Each 109

40 mm plain tee Each 27

307 MR Establishment of -2HP of submersible pump set of approved brand and make, all complete each 1

308 M/R Providing and fixing Grab bar (jaguar WAC-WHT-BAI090) & (jaguar WAC-WHT-BG0800) Each 1

309 MR Establishment of -2HP of submersible pump set of approved brand and make, all complete each 1

310 NS Planting the various varieties of plants, all complete, with digging all holes, providing sludge / manure / fertilisers etc. as required for the particular varieties, all complete, as per directions of E/I, all complete, with a maintenance of 3 months from the date of the plantation Each 2972

311 NS Supply and Installation of aesthetically designed Dustbins, Each 20

312 NS Supplying and Installation of Garden Bench of size 150cm x 70cm, Model No. DGB-004/EXL-100% rust free of Dwarka India or approved equivalent, finished with zinc plating, metallic primer, metallic top coat, metallic antique and PUP clear laquer, all complete as / directions of E/I. Each 30

313 MR 4-Seater Paddle (Pedal) Boat – FRP Hull FRP hull & deck with UV-resistant gel-coat; 4 molded seats; 2 pedal stations driving sealed chain/gear to paddlewheel/prop; tiller/wheel steering with FRP rudder; anti-skid deck; SS-304 fasteners; drain plugs; towing eye & 2 cleats; positive flotation; reflective strips; user manual (EN/HIN). Warranty: 12 months on hull/drive. Supply includes: boat, mooring ropes (2×10 m), boat hook, whistle, basic first-aid kit, on-water commissioning demo. Each 4

314 MR Life Jacket (PFD), 100 N ISO 12402 (100 N) compliant; high-viz fabric with retro-reflective tape; closed-cell foam; adjustable waist; crotch/leg strap; whistle; lifting loop; robust stitching; size marking. Each 20

315 MR Ring -Conforming to BIS IS 5326 (or SOLAS-type); HDPE shell with PU foam; OD ~750 mm, ID ~440 mm; 4 hand-grips; floating 30 m polypropylene throw-line; wall/rail mounting bracket; retro-reflective tape. Each 10

316 M/R Supply, Installation, Testing and Commissioning of 15 W LED solar Standalone Street lighting system having minimum initial lumen output of 1575 lumens (As per LM79 report of NABL lab) . The luminaire must be having inbuilt blue tooth system for monitoring health condition through an IOS & Android App based mobile application on Mobile Phone , with MPPT charge controller and IP 66 protection . The Solar lighting system should be having 60 Wp PV module, 12.8V/40 Ah LiFePO4 (Lithium Ferro Phosphate) battery pack, 6 mtr long M .S galvanized Tubular pole (Hot dip galvanized) , Metallic battery box and Stainless steel Nuts & bolts with 4 year maintenance. Complete set make Havells (Cat no.LHSTANU7AAAI015) or approved equivalent, including all works with RCC foundation, all complete. Each 70

317 M/R Supply and Erection of 9 M Semi solar High mast with panel head frame and Foundation bolts. SITC of highly Efficient IP65 LED Hybrid Solar lighting system having minimum System lumen output as 11340 Lumen with maximum system wattage of 63W with 180lm/W. with inbuilt high efficiency solar panel and LIFEPO4 Battery and high efficiency microprocessorbased charge controller. Panel – 335W LifePO4 battery - 25.6V 60Ah and IP65 protection.4no. light on each Mast of 63 watt.all complete including Foundation,installation etc Each 1

318 M/R Supplying Installing Testing and commissioning of 20 Pair distribution tag box all complete as per specification and direction of E/I Each 1

319 Supply of PVC insulated PVC sheathed aluminium conductor armoured under ground cable of graded 1.1 KV for working voltage upto 1100 volts conforming to ISI 1554 (Part-I) of 1964 with upto date amendment as detailed below.

AR-1 (a) 3.5 Core 25 sq mm Meter 75