Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.2 LAccepted-AOC AT BHEJAPUT PO DAMANJODI DIST KORAPUT ODISHA 763008 | KORAPUT | ODISHA | 763008 | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹34.8 L+₹3.6 L (11.6%)Rejected-AOC A 77 SECTOR 1 NALCO TOWNSHIP DAMANJODI DAMANJODI KORAPUT ODISHA 763008 | KORAPUT | ODISHA | 763008 | L2 | Rejected-AOC REJECTED | |
| 3 | L3₹36.5 L+₹5.3 L (17.2%)Rejected-AOC SATASANG SATASANG BHEJAPUT DAMANJODI DAMANJODI KORAPUT ODISHA 763008 | KORAPUT | ODISHA | 763008 | L3 | Rejected-AOC REJECTED | |
| 4 | L4₹37.6 L+₹6.4 L (20.5%)Rejected-AOC MATHALPUT DAMANJODI DIST KORAPUT ODISHA 763008 | KORAPUT | ODISHA | 763008 | L4 | Rejected-AOC REJECTED | |
| 5 | L5₹38.7 L+₹7.5 L (24.0%)Rejected-AOC SATSANG MAIN ROAD BHEJAPUT DAMANJODI KORAPUT ODISHA 763008 | DAMANJODI | KORAPUT | ODISHA | 763008 | L5 | Rejected-AOC REJECTED |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
15 Jun 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GM,TnC
GM,TnC,NALCO,DAMANJODI
CONSTRUCTION OF TWO NOS BAY AND STORE ROOM AT FIRE STATION OF ALUMINA REFINERY, NALCO, DAMANJODI
2022_NALCO_691894_1
TnC/AR/03/eC-2399
Limited
Miscellaneous Works
Item Rate
365 days
NALCO, DAMANJODI
6 documents required · 6 mandatory
₹0
₹40,000
Yes
26 Nov 2022
31 May 2022
17 Jun 2022
31 May 2022
15 Jun 2022
31 May 2022
Amount
1.1.2) Removing the excavated materials,debris of any description and any other waste materials,spoil including loading into trucks/tractors using baskets by head load or any other means and transporting bytrucks/tractors and unloading at the earmarked places, spreading levelling complete for the following leads.
1.1.2.1) Upto 1KM
2.8) Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2.8.1) All Kind of Soil
2.8.3) Hard rock (blasting prohibited)
2.25) Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
4.1) Providing and laying plain cement concrete at all depths below and upto ground level in foundations, fillings, non-suspended floors including tamping, curing etc. but excluding the cost of centering and shuttering etc. as specified or directed in any shape, position, thickness and finishing the top surface rough or smooth etc.all complete up to Plinth Level (CEMENT & FLY ASH WILL BE ISSUED FREE OF COST AT NALCO'S STORE/ISSUE POINT INSIDE PLANT.)
4.1.3) P.C.C.1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 20 mm nominal size)
4.1.13) 1:2½:4:11 (1 ordinary portland cement : 2½ fly ash : 4 coarse sand : 11 graded stone aggregate 40 mm nominal size)
5.1) Providing and laying cement concrete for all RCC works with maximum 20mm size hard granite stone aggregate in roofs, including slope roof, stair case,landing slabs, canopies, chajjas, bands, lintels, beams, lofts, projections, manhole covers,valve chambers, retaining walls, abutments, foundation rafts etc. as per drawing, specification and direction of Engineer-in-Charge at all heights including mechanical vibration for consolidation, curing for 3 weeks excluding cost of shuttering and steel reinforcement.The rate will be inclusive of finishing and plastering the exposed surfaces with cement mortar 1:3(1cement: 3 fine sand) of thickness not exceeding 6mm to give a smooth and even surface (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.)
5.1.2) Same as above item in 1:1.5:3(1cement:1.5 coarse sand:3stone aggregate 20mm & down size) up to plinth level
5.2.2) Same as above item in 1:1.5:3(1cement:1.5 coarse sand:3stone aggregate 20mm & down size) above plinth level up to Floor V Level
5.9) Providing and fixing, centering and shuttering including curved, hexagonal and such other shaped shuttering for following as directed including strutting, bracing, propping etc. keeping the same in position during concreting and removal of the same after specified period etc. complete for all depths and heights.
5.9.1) Foundations, footings, bases of columns, etc up to plinth.
5.9.2) Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc.
5.9.3) Suspended floors, roofs, landings, balconies and access platform
5.9.4) Shelves (Cast in situ)
5.9.5) Lintels, beams, plinth beams, girders, bressumers and cantilevers
5.9.6) Columns, Pillars, Piers, Abutments, Posts and Struts
5.22.3) Bending / Binding and placing in position high yield deformed bars reinforcement conforming to IS:1139 or cold twisted deformed bars reinforcement conforming IS:1786 for R.C.C. work at all height and depths, carting the same from store / issue points to site of work, straightening, cleaning, bending to required shape and lengths as per details, including supplying and binding with contractor's own 16 SWG soft annealed binding wire and placing with proper cover blocks, supports, chairs, spacers and return of unused / scrap / unserviceable steel to owner's storagepointetc.allcomplete. [REINFORCEMENT STEEL / TOR STEEL SHALL BE ISSUED FREE OF COST AT NALCO'S STORE]
6.1.2) Providing & laying of Fly Ash Brick masonry in foundation & plinth, in any shape including curing, all complete in Cement mortar (1:6) (CEMENT / FLY ASH BRICK SHALL BE ISSUED FREE OF COST FROM INSIDE PLANT NALCO'S STORE.)
6.4.2) Providing & laying of Fly Ash Brick masonry in superstructure, in any shape including scaffolding, staging, curing, all complete in Cement mortar (1:6) (CEMENT / FLY ASH BRICK SHALL BE ISSUED FREE OF COST FROM INSIDE PLANT NALCO'S STORE.)
6.13.2) Providing half brick masonary work in partition walls etc. for any depth below ground level/all heights above ground level, using 50 class designation brick in cement mortar 1:4 (1 cement: 4 sand) including providing and fixing 2 nos. 8mm dia M.S.bars with annealed binding wire at every fourth course in cement mortar,with necessary scaffolding staging, curing, raking out joints etc. all completed as per the direction of Engineer-in-Charge.(CEMENT & STEEL SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).
9.48.1) Providing,fabricating, making, transporting to site and erecting of ornamental structural steel work like gates, doors, windows, grills,ventilators, in built up sections by welded/bolted/rivetted with M.S. bars, tees, angles, flats, chanels, C.Q.plates, pipes and box or hollow sections etc. as per specification and direction of Engineer-in-charge including necessary fittings such as tower bolt,handle etc priming coat with approved steel primer etc.all completefor all heights and depths . (STRUCTURAL STEEL/ALL MATERIALS WILL BE PROCURED BY THE AGENCY).
9.7.7.1) Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows with 4mm glass.
9.1.2) Providing Sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
9.21.1) Providing & fixing ISI marked flush door shutters conforming to IS:2202(Part-1) non-decoretive type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws, all complete as per the direction of Engineer-in-charge.
9.95) Providing and fixing the following standarded anodised aluminium fittings of approved quality with necessary screws etc. all complete as per the direction of Engineer-in-charge.
9.95.1) aluminium butt hinges 100x75x4 mm
9.95.2) Tower bolt 250x10 mm sizes.
9.95.3) Sliding door bolts250x16 mm sizes
9.95.4) Handles 125 mm sizes.
10.2) Providing, fabricating, erecting in position and testing/examining bolted and/or welded STRUCTURAL STEEL WORKS at all levels and locations, including all type of sections , builtup sections / compound sections and/ or plates/bent plates (including supplying, fabricating, fixing and keeping in position at all levels and locations THREADED ANCHOR BOLTS of all diameters and nomenclature, including nuts, washers, anchor plates, pipe sleeves etc. in foundations. Columns etc ) in trusses, purlins, wind ties, wind girders, columns, portals, racks, portals, bracings, platform, staircases including chequard plates and gratings) , ladders, stoppers, side runners, sag rods, hand rails etc including transporting to site , storing, cutting to required size, straightening/ bending if required, edge preparation, cleaning, preheating, bolting/ welding of joints, ( including sealing the joints of box sections with continuous welding, finishing edges by grinding, fixing in line and level with temporary staging and bracing and removal of the same after erection, including preparation and submission of detailed fabrication drawing, preparing the surface for painting and applying one coat of shop primer complete as specified and directed by trhe E.I.C. ( ALL REQUIRED MATERIALS SHALL BE SUPPLIED BY THE AGENCY AT THEIR OWN COST. )
10.5.1) Providing and fixing 1mm thick M.S. sheet doors /windows with frame of M.S. angle 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer etc completed as per the direction of E-I-C.
11.3.1) Providing & laying cement flooring 40mm thick with 1:2:4 (1cement: 2finesand: 4graded stone aggregate of 20mm & down size) finished with a floating coat of neat cement including cement slurry, rounding off edges and strips, curing, including providing and fixing 40 x 4mm glass strips for making panels etc. all complete. (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).
11.41.2) Providing and laying vitrified floor tiles of sizes 600x600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% of 1st quality ( i.e. johnson/kajaria/RAK or equivalent) conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., all completed as per the direction of Engg-In-Charge.[ ONLY GREY CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE.] .
12.41) Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(Single socketed pipes.)etc. all completed as per the direction of Engg-in-charge.
12.41.2) 110 mm diameter
12.42) Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all completed as per the direction of Engg-in-charge..
12.42.1) Coupler 110mm dia
12.42.5) Bend 87.5° 110mm dia
12.42.6.2) 110 mm Shoe (Plain)
13.1.2) Providing and laying 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including applying water to surface before plastering,scaffolding,curing up to 7 days etc. all complete for all height/depth etc. all completed as per the direction of Engineer-in-charge. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE).
13.2.2) Providing and laying 15mm thick cement plaster in cement mortar 1:6 (1cement: 6sand) on the rough sides of single or half brick wall or masonary work using approved type sand including curing etc. all complete for all heights.( CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE )
13.16.1) Providing and laying 6 mm cement plaster in cement mortar 1:3 (1 cement: 3 sand) on concrete/masonry surfaces including cleaning , hacking concrete surfaces, scaffolding , providing drip mould if required, watering, curing etc. complete for all heights etc. all completed as per the direction of Engineer-in-charge. (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).
13.18) Providing and laying neat cement punning over the platsered/ concrete surfaces at the rate of 2.2 Kg. of cement for one square metre including curing etc. all completed as per the direction of E-I-C [CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE.]
13.42.1) Distempering with 1st quality acrylic washable distemper( ready mixed ) of approved make, after applying one coat of cement primer on walls and ceiling etc. of approved brand and manufacture on new work with approved shade to give an even shade complete up to the satisfaction of Engineer-in-charge, as per manufacture's specification,including scaffolding,all complete. Area must be cleaned off spilled paints etc. after completion of painting works.
13.46.1) Providing and applying Acrylic Smooth exterior paint approved make & shade on walls etc. by applying @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm, to give an even shade after removing the foreign particle with wire brush etc. ( where ever required) on new work as specified at all heights including all labour , tools , tackles scaffolding , consumables and materials required for the work and as directed by the Engineer-in-charge.
13.61.1) Painting two or more coats with synthetic enamel paint of approved brand and manufacture in all shades on all types of surface like steel/wood/concrete/plaster/for lettering etc. all complete up to the direction of Engineer-in-Charge.
13.80) Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth etc. all complete as directed by the Engineer-in-charge
15.3) Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
15.2.1) Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
15.7.4) Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge
15.12.1) Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
15.18) Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead.
15.42.2) Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead .( 100 mm dia pipe)
16.68) Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge..(CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)
21.1) Providing and fixing aluminium work for doors, windows, ventilators /frame and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws,roller etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing to be paid in respective items separately) :
21.1.1.2) Powder coated aluminium (minimum thickness of powder coating 50 micron) For fixed portion
21.1.2.2) For shutters and frames of doors, windows & ventilators including providing and fixing hinges/pivots/rollers with Powder coated aluminium (minimum thickness of powder coating 50 micron) and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings & glazings shall be paid in respective items separately)
21.3) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in respective items):
21.3.2) With float glass panes of 5.50 mm thickness
22.14.1) Providing and laying grading concrete with (1 cement:2 corse sand:4 graded stone aggregate of 20 mm and down size) on roof with required thickness as directed by Engineer in charge, finished with 6mm thick cement plaster 1:3: and neat cement punning,including cleaning the surface,curing up to 15 days,at all hight/any floor,etc complete. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE).
22.15) Supplying and applying epoxy anchor bolt chemical of Hilti / make type RE-500 V3 or Fischer Fis EM585 approved equivalent of approximate length (maximum 300mm long) in concrete to take direct tension of minimum 1.6M ton incuding workmanship drilling cleaning the hole, placing and aligning the fastener, etc as per direction of E-I-C.( Rebar shall be issued free of cost at Nalco store.)
22.15.1) For bars of Dia up to 12 mm.
22.15.2) For bars of Dia of 16 mm.
26.31) Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect
26.31.1) SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer.
26.31.2) Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make.
M/S PALEI CONSTRUCTION
M/S M H ZAMAN
NILANCHAL NAHAK
M/s P.K.RAY
HARI BANDHU BISWAL
KETHAKI ENGINEERING CONSTRUCTION
DIPAK ENTERPRISES
MS/ BABA BISWANATH CONSTRUCTION
PRADIP KUMAR PATRO
M/s Sri Jagannath Construction
ANANTA BAGH
R AND B CONSTRUCTION
BHIMASEN PANDA
NSPP INDIA PRIVATE LIMITED
M/s. OM PROVISIONS
VIABLE INFRASTRUCTURE AND LOGISTICS PVT LTD
M/S SADASHIV ENTERPRISES
M/S BIJAYA KUMAR KHORA
S K ENGINEERING WORKS
AMITAV CONSTRUCTION
stage.html
html • 0.10 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_728079.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .