COMPREHENSIVE DAY TO DAY MAINTENANCE OF MISC ELECTRICAL SERVICES IN RESIDENTIAL AND TECH AREA AT DFRL MYSORE UNDER GE I R N D EAST BANGALORE

Amount

Material and labour for receiving complaints from JE in Charge, lodged by the user / occupants of electrification nature, rectification of the fault as per the complaint lodged by the user onward 433V 3 Ph 50 Hz in respect of main distribution board having switch board, fused, MCB distribution board in sheet metal enclosure, point wiring fixture for light / fan / bell / light or power sockets, metal clad plug socket complete repairs to the extent by removing connections from the system, rectifying faults in (surface / concealed) wiring / circuits, sunken boxes, junction boxes, main switches, MCBs / DBs, any type of utility light fittings, lamp holders, AC, ceiling fan / exhaust fans and other connected fixtures of internal electrification including providing stores such as wires of appropriate size and conductor matching to existing one upto the light of 5 mtr, insulation tape, screws, nuts as per the site requirement to rectify the fault with regard to complaint lodged and refixing of fitting and fixture to their original position as dismantled complete all as directed at site to the entire satisfaction of Engineer-in-Charge.

Details of Area : (a) DFRL Residential Area (b) MES Residential Area (c) DFRL Technical Area (d) MES Office (e) All MES installations under DFRL Campus

NOTE FOR ITEM NO 1 :- (i) Services shall be provided for attending and completing complaints on same day on urgent basis by providing technician with safety gadgets, tools and necessary equipments as per govt norms and as directed by Engineer in charge. (ii) The services provided under this item with necessary technicians(at least one Electrician and two htelpers) during the period 0800 Hrs to 1700 Hrs with 1 hour lunch break on EACH day shall be meausred as One Job for payment purpose. In case if services are not attended in any particular day / time penal recovery @ double the quoted rate will be effected from the contractor for that day. (iii) The electrical spares will be paid separately under supply only items. (iii) Rate quoted shall include for dressing of loose hanging cables in the site as and when required. (iv) T&P like Ladder upto 20 ft , 2.5 sq mm multistranded copper wire upto 5m for testing, tester, cutting plier, nose plyer, insulation tapes of various colour, allen key sets, spanner tool sets, crimping tools, screw driver sets, test lamp, multimeter, hand gloves, drilling machine, hammer required for electrician shall be provided by the contractor. (v) The cost of providing additional labours to carry mobile type step ladders for repairs of street light is deemed to have been included in the rate quoted. (vi) Contractor shall provide the complaint register and complaint slip serially numbered in quadruplicate as per prescribed format available in the sub-division. The rate of such items are included in this items.

(vii) Any complaint which is left out/unattendent 2 days by the electrician by any reasons the same to be communicated to the JE in charge / AGE E/M with proper justified reason duly countersigned by User / rep of User. (viii) The technicians on duty should have proper uniform and contractor shall provide with all protective arrangement during the duties and required tools for maintenance (ix) The staff / tradesman deployed by the contractor should be much familiar with the distribution system of DFRL Mysore Area. If the tradesmen are found / observed indulged in any misbehaviour or illegal activities will be not allowed to continue to work in the premises. Further the contractor will be solely responsible for any loss or problem raised due to such situations. No claims / relief from department will be entertained in any circumstances. (x) The above quoted rate is inclusive of providing transport (at least one two wheeler) to the tradesman for prompt conveyance to the site. Further fuel required for the same needs to be provided by the contractor. The tradesmen needs to be equipped with at least one mobile connection each. (xi). The labourers shall be provided with protective devices and shall wear them while working. In case any accident / injury / fatal or partial disability happened, the contractor shall be solely responsible for settling all claims / compensation. Department will have a right to recover any sum indicated / claimed by Labour Commissioner / Court directive.

Attending day to day petty power supply problem complaints for maintenance and repairs of electric supply upto three phase 50 Hz, 433 V in DFRL Residential and Technical area and MES Complex complete all as specified and as directed by Engineer-in-Charge. Nature of duties (works) to be attended: - (i) Registering the complaints with JE E/M or rep of this sub-division as and when received either communicating by personally or by telephonically. (ii) No supply power complaint as and when received to be attended within 15 min and further give a prompt feed back report to JE (E/M) within half - an- hour telephonically. (iii) The problem needs to be rectified either temporarily / permanently within 02 Hours from the complaint been registered.

NOTE FOR ITEM NO 2 : (i) Necessary Tools / T&P needs to be supplied by the contractor for carrying out the Job. (ii) Sufficient No of tradesmen needs to be supplied by the contractor. In this regard no extra amount can be claimed by the contractor under any circumstances. (iii) The supply problem needs to be rectified within 02 Hours from the complaint been registered, failing this clause the contractor will be charged a penalty of Rs 1000/-per complaint. In this context proof of delay in prescribed format submitted by user will be treated as final and binding.

Supply only following electrical fittings for replacing the un serviceable one complete all as specified and as directed. Make: Bajaj / Philips / Crompton Greaves / Syska / Havells or equivalent.

LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as direced.

1 x 20W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

LED T8, linear LED T8 Mirror Lite LED Patti type, Capacity 20 watt with extruded aluminium body PC diffuser and inbuilt driver (Batten suitable for LED T8 lamps).

LED Glass T8 tube (LGT8) with in built driver and efficiency of 100 lm/W.

LED light fitting 1 x 9W / 1x10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

LED luminaire 600 mm x 600 mm, 35 / 36 watt, 220 V AC recessed / surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Suspended linear in sleck design is suitable for all commercial spaces of capacity 36 watts, 4 feet.

Post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant with driver and lamp complete. NOTE : The post top lantern needs to be of same make and model of existing at the site. If in any case non availability of same make, new type of fittings will be accepted at the discretion of Accepting Officer only and the contractor is abide to follow at any circumstances.

Pressure die cast powder coated housing with PC diffuser. efficient high output LED with IP65 protection LED Bollard light complete all as specified and as directed. NOTE : The Bollard light needs to be of same make and model of existing in the site. If in any case non availability of same make, new type of fittings will be accepted at the discretion of Accepting Officer only and the contractor is abide to follow at any circumstances.

Very high efficiency round highbay LED of capacity upto 150 W in PDC housing suitable for industrial application, the luminaire has efficacy upto 140 lm/W to reduce quantity / wattage thereby reducing operational cost. It has 10KV SPD and ingress protection of IP66 with additional safety chain.

Drivers suitable for existing internal LED light fittings of input capacity upto 36 W with active power factor correction (APFC) electronic driver. LED driver of suitable watt with existing LED security light fitting with operating voltage between 100-270 V of existing specifications and make complete all as specified and as directed by Engineer-in-Charge. Make of Existing Fittings : CG / Bajaj / Phillips

LED street light fitting 60 watt 230V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 66 protection Efficiency > 110/120 LPW, and 10KV SPD complete all as specified and as directed.

Driver for LED energy saving and environment area light fitting of 40 watt to 70 watts security light with active power factor correction (APFC) electronic driver. LED driver of suitable watt with existing LED security light fitting with operating voltage between 100-270 V of existing specifications and make complete all as specified and as directed by Engineer-in-Charge. Make of Existing Fittings : CG / Bajaj / Phillips

LED flood light 210 watt 230 V, AC outdoor type with thermal management in multiple optics and equipped with IP-66 protection, with impact and corrosion resistant complete with driver and lamp complete all as directed.

Supply only the following miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete testing and commissioning etc as required Make : L&T / Indo Asian / Legrand or equivalent

SP 6 A to 32A rating 240 / 415 V, 10 KA 'C' curve.

SPN 32 A rating 240 / 415 V, 10 KA 'C' curve

SPN 40 A to 63 A rating 240 / 415 V, 10 KA 'C' curve

TP 25 A to 63 A rating 240 / 415 V, 10 KA 'C' curve

TPN 16 A to 32 A rating 240 / 415 V, 10 KA 'C' curve

TPN 40 A to 100 A rating 240 / 415 V, 10 KA 'C' curve

Supply only the following internal electrical items. Make : Roma / Anchor penta or equivalent

1 way 6 A 230 Volts single pole modular type switch

1 way 16 A 230 Volts single pole modular type switch

1 way 6 A 230 Volts single pole Piano switch flush type.

1 way 16 A piano 230 Volts single pole Piano switch flush type

6 A 230 Volts 2 / 3 Pin socket outlet modular type switch

6 A/16 A 230 Volts 2 / 3 Pin socket outlet modular type

Socket outlet 2 in 1, 3 pin, 5 A ,230 Volts, flush type

Socket outlet 2 in 1, 3 pin, 5 and 15 amp 230 V flush type

Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal (2/4 fixing hole)

Switch socket combination 2 in 1, 5 A flush type (2/4 fixing hole)

Bell push, flush type, 5 Amp

Modular Bell push 6 A 1 module

Buzzer, Ding Dong AC. 230 volts, single pole

Ceiling rose, PVC / Polycarbonate, isolated body.

Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required

Plug top 3 pin 5 amps AC 230 volts.

Plug top 3 pin 15 Amps AC 230 volts.

Supply only terminal junction boxes of suitable ways, plastic / MS of thickness 2mm size and breadth of not less than 50mm with suitable openings for conductor including fixing of Cover plates / Hylem sheets complete all as specified and as directed. NOTE : The rate is deemed to be inclusive of necessary Mason work as required on walls.

Supply only hylam sheet complete all as specified and as directed.

Supply only the following cover plates alongwith frames complete all as specified and as directed. Make : Roma / Anchor / Penta or equivalent

1M Plate

2M Plate

3M Plate

4M Plate

6M Plate

8M Plate

Supply only in replacement the following MCB DBs complete all as specified and as directed. Make: L&T / Havells / Legrand NOTE : The rate is deemed to be inclusive of necessary Mason work as required on walls.

8 way SPN with 200 Amps rated busbar sheet metal enclosure (factory made) double door type

4 way SPN with 200 amps rated bus bar sheet metal enclosure (factory made) double door type

4 Way vertical TPN DB with MCCB as incomer double door type,

Supply only service wire 10 sqmm 4 core copper conductor complete all as specified and as directed. Make : Havells / Finolex / Polycab

ARCHANA CONSTRUCTION CO (BID ID -3112982)