Karnataka

Active

Works

Irrigation and Other Works

Providing Irrigation Facilities through Borewell to Shantappa S/o Chandramappa Sy. No. 123/3 of Savalgi-B Village in Kalaburagi Taluka & District (UNDER SCP FOR THE YEAR 2025-26)

Minor Irrigation Department

Minor Irrigation Division Kalaburagi | Kalaburagi, Karnataka

Amount: ₹3.4 LCloses: 20 Jun 20263d left

Tender Value

₹3.4 L

EMD Value

₹8,600

Closing Date

20 Jun 2026, 11:00 pm3d left

Tender Inviting Organisation

Name

Minor Irrigation Department

Work Description

Providing Irrigation Facilities through Borewell to Shantappa S/o Chandramappa Sy. No. 123/3 of Savalgi-B Village in Kalaburagi Taluka & District (UNDER SCP FOR THE YEAR 2025-26)

Tender Information

Tender ID

305649

Reference Number

MI/2026-27/IW/WORK_INDENT11932

Tender Type

Open

Product Category

Irrigation and Other Works

Location

Minor Irrigation Division Kalaburagi

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredKPWD Class IV & Above Registration Certificate

RequiredGST Registration Certificate

RequiredPAN Certificate

RequiredLatest IT Returns copies

RequiredThe Tenderer has quote his rate by excluding GST. However Contract will be concluded for the amount Exclusive of GST but applicable GST will be paid extra prevailing at the time of execution. If the GST Rates are revised during the contract period, the Tenderer /Employer has to accept the revised GST rates for making payment / recovery.

RequiredAnnual Turnover Certificate With UDIN / Work Done Certificate

RequiredBID CAPACITY

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

Tender processing amount will not be refundable

Conditional tender will not be Considered.

Sub-Leasing/G.P.A of Work is Prohibited.

The undersigned reserves the right to accept or reject any or all tenders without assigning any reason.

Contractors should execute the work by procuring cement, steel, pipes and any other material/machineries of IS standard required for the work on their own and necessary test certificates should be produced and approval of the same to be obtained before use of the same.

The contractor have been registered as class-IV & Above Registration Certificate (up load registration certificate of original should be produced while opening the tender)

To qualify for award of this contract each tenderer in his name should have work done certificate/Turnover of Rs. 3.43 Lakhs in any one of the last five years i.e. 2021-22 to 2025-26.(a) Eligible Tenderes will be qualified only if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity (AXNX2.5-B) where A Maximum value of civil engineering works executed in any one year during the last five years i.e. (2021-22 to 2025-26) Upload Audit Report by Chartered Accountant, showing payments received on civil contracts, to facilitate calculating tender capacity and original should be produced while opening the tender)

The contractor has to furnish Additional security deposit for unbalance tender as per clause 29.1 of ITT, to an amount equal to the amount difference in contract price and amount put to tender, in addition to 5% performance guarantee (in any of the form prescribed) while concluding the Agreement.

The Tenderer has to quote his rate by excluding GST. However Contract will be concluded for the amount (Exclusive of GST) but applicable GST will be paid extra prevailing at the time of execution. If the GST Rates are revised during the contract period, the Tenderer/ Employer has to accept the revised GST rates for making payment / recovery.

The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning. The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing.

Name, address, telephone and email id of the contractor is to be provided

During the execution of work, if any minor minerals are required contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994 (as amended up to date). As per the prevailing rules, for any use of Minor Minerals, the contractor has to submit the Mineral Dispatch Permit (MDP) obtained from Mines and Geology Department. If Mineral Dispatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral concession rules 1994 (as amended from time to time) will be deducted from contractors bills at the time of payment.

The tenderer shall also disclose if there are any bankruptcy proceedings against him.

Scanned signature of the bidder/ firm/ company authorized representative of the bidder/ firm/ company shall be attached while uploading bid document.

If any of the dates mentioned above happens to be a general holiday, the next working day holds good.

The tender processing charges paid by the bidder/ firm/ company are not refundable even if the tenders are cancelled.

Typographical errors if any will not be the ground for any claims by the contractor.

The intending bidder firm/ company are advised to visit the work site before submission of tenders.

The necessary certificates/ documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to e-tender documents. The original certificate/ documents shall be produced for verification when demanded otherwise the tender will be treated as non-responsive bid and rejected.

Addendum /Corrigendum will be published in website for all modifications or corrections if any

The contractor should mention their recent correct postal address and mail address in declaration forms

Incomplete Tender documents will be rejected

All materials like steel, cement etc., required for the above work should be procured by contractor only. No departmental supply of any material shall be made by dept.

As per the Karnataka Building and other construction workers welfare Cess Act 1996, 1% of the bill amount will be deducted from the bills

The Agency should get the bore drilled by authorized riggers (having 7A Licence) and Certificate to be furnished during submission of the bill.

The agency should ensure that the Borewell has sufficient yield and the same to be checked by Temporary electrical arrangements and further works to be carried out.

If the borewell drilled is failed, it has to be reported to the concerned AEE and the agency should take steps for closing the drilled well with available soil and close it at own cost as per Govt order.

The contractor should locate water feasible points through qualified Geologist in the land of the beneficiary selected by the employer. The contractor should have full-fledged geologist with fast rig supporting vehicles and team of workers

Before drilling of borewells, the point should be once again got confirmed in the consultation with the Geologist.

Proper precautionary measures have to be taken for providing saftey measures to prevent any casualties with respect to failed borewell.

The bidder after installing the pump and motor in successful bore, he should make his own arrangement to test and run the motor and after that the department will take hand over from him.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹8,600

Important Dates

Last Activity

12 Jun 2026

Published

12 Jun 2026

Download Ends

19 Jun 2026

BOQ Preview

•

Providing Irrigation Facilities through Borewell to Shantappa S/o Chandramappa Sy. No. 123/3 of Savalgi-B Village in Kalaburagi Taluka & District (UNDER SCP FOR THE YEAR 2025-26)

•

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

Providing and installing at site of work 160 mm dia (weight of pipe-3.923 kg) 8 Kg/m² P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to li...

•

Providing and installing at site of work 160 mm dia (weight of pipe-2.753 kg) 4 Kg/m2 PVC pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line,...

•

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

•

Providing 7.50 HP-120 LPM @ 132 m=14 STG Outlet Dia-2.00" submersible pump set of 150mm dia suitable for bore well and confirming to IS 8034-2000; 3Phase, SS Bowl & Impeller with Low volt Motor as per...

•

Supply and delivery at site Brand new best make 1x3x10 Sqm PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendmen...

•

Providing, laying and jointing 63 mm dia pipes of HDPE grade PE80 PN12.5 of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unlo...

•

Supply and delivery at site stringing of heavy duty Nylone/ PP rope with ISI etc complete suitable for Single phase Pumpsets etc., complete with all lead and lifts as per the direction of Engineer-in-...

•

Providing, laying and fixing of 50 mm dia heavy duty GI pipes conforming to IS 1239: 1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherev...

•

Supply and delivery at site 50 mm dia wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any etc., complete with all lead and lifts as per the directio...

•

Supply and delivery at site wrought middle steel (galvanized) 50 mm dia GI bend confirming to IS 1239-II, 1991 with latest amendments if any etc., complete with all lead and lifts as per the directio...

•

Supply and delivery at site special moulded variety 50 mm dia PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments etc., complete with all lead a...

•

Supply and delivery at site of brand new best make 50 mm non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments etc., complete with all lead and lifts as per the direction ...

•

Supply and delivery at site of brand new best make 63 mm pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments etc., complete with all lead and lifts as per t...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

•

Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING: 1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analo...

•

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., com...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Labour charges for providing connection using 3.5x16 sqmm insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materi...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit etc., complete with...

•

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Detailed_Specification.doc

Others - SPECIFICATIONS • 0.78 MB

KW-1 11932 GENERAL.doc

Tender Document • 1.63 MB

Ready to Participate?

Download all tender documents and submit your bid

Providing Irrigation Facilities through Borewell to Shantappa S/o Chandramappa Sy. No. 123/3 of Savalgi-B Village in Kalaburagi Taluka & District (UNDER SCP FOR THE YEAR 2025-26)

Market Intelligence

Tender Inviting Organisation

Work Description

Tender Information

Documents Required

Eligibility Criteria

Fee & Financial Details

Important Dates

BOQ Preview

Documents

NIT Documents

Ready to Participate?