Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹37.0 L+₹1.4 L (3.94%)Rejected-AOC | L2 | Rejected-AOC SECOND LOWEST BIDDER | |
| 3 | L3₹39.3 L+₹3.7 L (10.4%)Rejected-AOC | L3 | Rejected-AOC THIRD LOWEST BIDDER | |
| 4 | L4₹39.6 L+₹4.0 L (11.3%)Rejected-AOC | L4 | Rejected-AOC FOURTH LOWEST BIDDER | |
| 5 | L5₹41.3 L+₹5.7 L (15.9%)Rejected-AOC | L5 | Rejected-AOC FIFTH LOWEST BIDDER |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
19 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAGROTA
GE NAGROTA
PROVN OF CERTAIN LBW,REVENUE,MINOR WORKSAND SPECIAL REPAIR TO BLDG NO TN 458,T 317 UNDER GE NAGROTA.
2022_MES_569967_2
GEN-49/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE NAGROTA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE NAGROTA
₹97,000
Yes
24 Mar 2023
7 Jan 2023
21 Jan 2023
7 Jan 2023
19 Jan 2023
13 Jan 2023
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm eachand n exc 4 sqm and removing from site.
Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles.
Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius build in CM 1:4 using all as specified using old size bricks
Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thickness.
Demolition of cement concrete (unreinforced) of any description and any position not other wise specifically provided.
Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion.
Pressed steel frames of size 125 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including two coats of synthetic enamel paint over one coat of red oxide complete.
S&F 2nd class hard wood, 40 mm thick , flush shutter solid core construction with block board core and plywood both side face decorative panels for vision panels or peephole sqaure or rectangular includinf lipping (Glass measured and paid saparately) other fitting included like Mortice lock etc fitted to chowkhets.
35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.20(a), supplied and fitted to chowkats.
Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples
M&L for PCC 1:2:4 type B-1 (20mm graded aggregate ) 25mm thick as in Sub base floor
PCC 1:3:6 C-1 (using 20mm graded crushed stone aggregate) as in plinth protection (75mm thick ) finished even and fair all as specified.
Box type Steel window side hung double shutters with provision for desert cooler/AC(inside for wire mesh & out side for glass), including guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded and fixed, steel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3 and directed. Note:- Wire mesh and sheet glass shall be measured and paid separately
Sheet glass 3.00mm thick ordinary quality and glazing with oil putty pin head type glass.
100mm long butt hinges (medium weight) colled rolled mild steel fixed with welding.
Extruded aluminium alloy handles fabricated type anodised of size 125mm long
MS 300 mm ordinary rat rails rod pattern door springs including roller and roller plate.
S& F Floor door stopper of aluminium alloy body and tongue ,anodised ,with hard drawn steel spring ,fixed in floor overall length of cover plate 140mm
300mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.
Aluminium anodized 200mm long barrel tower bolt of extruded section and fixed.
Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified ( internally)
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement with Water proffing compound all as specified (WPC measure and pais saperately)
Supply only Liquid water proofing compound.
Applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces.
M&L for Complete removal of existing treatment applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface .
M&L for Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface .
M & L preparing new plastered surfaces of walls and applying Finishing of wall with acrylic smooth exterior paint of required paint of required shade new work (two or more coat applied @ 1.67ltr/10Sqm and including priming coat of exterior primer applied @ 2.2 Kg/10 Sqm).
M & L for complete removal of existing trreatment preparing old plastered surfaces of walls and applying Finishing of wall with acrylic smooth exterior paint of required paint of required shade new work (two or more coat applied @ 1.67ltr/10Sqm and including priming coat of exterior primer applied @ 2.2 Kg/10 Sqm).
M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge
M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 15mm thick screed bed in cement mortar 1:4 complete including dismantaling /demolation/Taking down Note:- Rates also includes in this item for necessary raking,circular cutting or notching and waste on tiles
Dismantling of wall and ceiling boards( fibre,pulp,insulations etc) orinsulation boards/slabs/blankets any thickness including cover fillets all as directed
Supply and fix aluminium anodised snap grid frame work for for flase ceiling for E board size 600 x 600mm x 6MM, inserted in GI/Alluminium frame as in celing main Tee section of size 36.5 mm x 25 mm x 1.4 mm thick, cross Tee section of size 23.5 mm x 26.4 mm x 1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders complete all as specified and directed.
RCC 1:2:4 type B-1 ( using 20mm graded crushed stoneagg) as in chajjas/Lintel beam etc, shelves and similar items.
TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia.
All as per item No above but 6mm to 8mm dia -ditto-.as in strupps
Providing number plate of size 450 x 300x20mm in CM 1:4 and writing building No of height 8 to 10cms with luminous paint through grooves of size 12 x 12mm ( Base: Black, grooves : orange)
Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110mm bore.
S&F PVC (SWR) Bends any radius for 110mm bore.
S&F PVC (SWR) Branch pieces single( Single Y) equal or unequal) for 110mm bore with oval access doors.
Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300 grams)
M&L PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in copings, plinth course, damp proof course, bed blocks, benching, PCC cills and similar items.
PCC 1:4:8 D-2 (using 40mm graded crushed stone aggregate) as a sub base to chequred tile ( 75mm thick ) finished even and rough.
20mm thick screed or screed bedding in cement mortar 1:4 as a sub base to interlocking tile
Cement concrete interlocking pre-polished tiles glossy look machine pressed 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry (with grey cement and pigment) as in floors complete all as specified and directed.
S&F in repairs 20 to 25mm external dia drapery rods stain lesssteel with incuding designer lattos and brackets all as specified and approved by Engr In charge including taking out old pelmet with curtain rods all as directed.
Dismantling Plain or Corrugated steel sheeting, any guge, thickness in roof covering and removing from site of work complete all as specified
S& F 0.50mm thick Pre painted galvalume alluminium zinc coating GI based corrugated steel sheeting with colour having tensile strength 550Mpa as in roof covering /Cladding to wall fixed with self tapping screws as specified. and 15cm end lap fixed with'L' type or 'J' type hook bolt (08mm dia) complete all as specified and as directed of class VIII.
S& F 0.50mm thick Pre painted galvalume alluminium zinc coating GI based Plain steel sheeting with colour having tensile strength 550Mpa as in roof covering /Cladding to wall fixed with self tapping screws as specified. and 15cm end lap fixed with'L' type or 'J' type hook bolt (08mm dia) complete all as specified and as directed of class VIII.
M & L for Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and directed
S/F mild steel trusses (framed) purlins, rafters, crane gantries, rails and fastenings and heavy brackets framing (Beam,tee,angle,channel or flat sections)including distance pieces, cleats etc conforming to Fe-410-W Gde- E- 250 (qualaity B) all as directed and specified by Engr-in-Charge
Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) complete all as specified and directed by Engineer-in-charge.
M & L, preparation of new or previously untreated surfaces with one coat of Red oxide and two coats of synthetic enamel of ordinary tint on surfaces of any description over 10 cm in width or grith, not otherwise described.
Taking down eaves gutter and rain water pipes (any size or pattern),incl all fitings, heads,shoes,bends,swan necks, etc incl cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories) all as directed and specified by Engr-in-Charge
S/F 1.25 mm thick mild steel sheet as in eaves gutters of 150mm dia galvanised sheet class 3, half round with rounded edges all as directed and specified by Engr-in-Charge
Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.
M&L Cement concrete Type D-2 1:4:8 (using 40 mm graded aggregate) in foundations, filling and mass concrete all as specified.
M&L Brick work with subclass 'B' old size bricks/ tiles straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 exc 6m mean radius.
M&L for PCC (1:3:6) Type C1 using 20mm graded stone agg as in surface channel & drain incl form work.
M&L Rendering 15 mm thick on other than fair faces of brick work, stone masonry or concrete surfaces in cement mortar 1:4 on wall surfaces, finishing the surface even and smooth with out using extra cement all as specified.
Extra for forming fair finished drain or channel 25cm inner girth in cement concrete using extra cement including forms ,moulds,mitred/stopped ends etc
All as per item above Add or deduct for each 25mm girth over under 30 cm girth
Surface excavation exc 30 cm deep and averaging 15cm deep and getting out in any types of soil.
Removing excavated material n.exc 50m and deposting where directed at a level n.exc 1.5 m above the starting point
M&L hard core of gauge n.exc 63mm, deposited spread and leveled in layers n.exc 15cm thick. Watered hand rammed to a true surface, broken stone or boulders.
M&L 100 mm thick cement conc type C-2 1:2:4 (40mm graded stone agg) finished even and fare.
S&F Machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape & size confirming to IS-15658-2006 of 60 mm thick, M-35 grade.
Sand filling under floors or in foundations including watering and consolidation to receive inter locking tiles
M&L PCC 1:2:4 type B-1 using 20mm graded agg as in coping benching etc
Factory made pre cast cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates) as in solid blocks(Kerb stone) exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.
M&L Painting with two coats of Synthetic enamel paint over a coat of primer including prepration of Surfaces of concrete of any description over 10 cm girth or width.
PVC(SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors 110 mm dia
M & L kota stone 18 to 20 mm thick.laid and jointed with grey cement of size 55cms X 55 cms and pointing with white cement 1:2 using marble dusts admixture of pigment to match including 15mm thick screed bed in CM 1:4.
M & L for Marble work with 15 mm thick 550mm long and 75 mm wide strip as in border in flooring including rubbing and grinding , polishing.
S&F for non skid ceramic jointless tiles Porceleno tiles in any shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in whitle or coloured cement to match all as specified and specified by Engr-in-Charge. Tiles approved by GE.
M&L for Glazed ceramic tiles in vertical surfaces 450 x 350 x 7 mm in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and specified by Engr-in-Charge. Tiles approved by GE.
S&Fin repairs fancy type CP bib tap cast copper alloy with crutch or butterfly handle screwed down, screed for iron pipe or for brass ferrule and fixed. 15mm bore.
S&Fin repairs fancy type CP stop valves 15 mm bore dia fancy typecast copper alloy, with captsain heads,screwed down with high pressure screwed with iron pipe.
S/F stop valves cost copper alloy screwed down high pressure with crutch or butter fly handle and fixed, 15 mm bore all as specified and as directed.
S&Fin repairs 10 Ltr capacity PVC valueless syphonic action type flushing cistern low level white with inlet valve floot and handle, bracket fixed in repair.
S & F Vitreous china wash basin, white, flat back, size 550mm x 400mm including, waste, chain and plug and porcelain stopperand brackets.
S&F in repairs viterous china wash down water closet pan (pedestral pattern) white including connection to drain and to flush pipe.
S&F for plastic water closet seat back,closed pattern with flat bottom and cover and mild steel chromium plated hinging device.
S&F for heaith faucet (ABS body) mild steel 15mm dia pipe 1.25mtr long flexible tube wall hook and fiting to the connection all as directed by Eng-in-charge
S&F toilet paper holder white, viterous china box type
M/L for fixing steel water tubing of 15 mm bore medium grade fixed to wall ceiling or laid in floor.
S&F vitreous china urnial squatting flate white long (excluding flushing cistern approved by GE
S/F 110mm bore PVC (SWR) pipes single socketd in any length with rubber rings joints laid in floor or trenches all as specified and as directed.
All as per item no here above in before but 75mm bore complete all as specified
M/L for sheet glass self assembly consisting of 5.5mm thick sheet glass self 12 cm wide with chromium plated bracket guard and railing 60 cm long all as specified and as directed.
S&F Towel Rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats all as specified and as directed.
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.
S&F solid PVC door frame size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, S & F in opening as per specification & drawing.
S & F pillar tap cast copper alloy 15mm bore with capstan head, chromium plated, screwed down high pressure, with or with out lettered "Hot" or "Cold" with long screw shank and fly nuts, screwed for iron pipes.
M &L PVC connections 15mm size with PTMT nuts of length 300mm
S&F 100 mm long mild steel butt hinges medium weight cold rolled.
Use and waste of formwork for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces
Use and waste of formwork for sides of columns posts, struts,piers square or rectangular or polygonal rough finished surface of concrete all as specified.
M&L for form work to sides and soffits of floor or roof beams, beam hunchings, girders, bressummers, lintels, cantilevers, shelves,incluiding sub ports, overhangs, etc. also splays between floors and beams etc. for fair finished complete all as specified and directed by Engineer-in-Charge.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engineer-in-Charge.
M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed by Engineer-in-Charge.
M&L Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed by Engineer-in-Charge.
Reinforced cement concretetc M-25 (design Mix) using 20mm graded stone aggregate as in foundation, plinth beams,footings etc,.
Reinforced cement concretetc M-25 (design Mix) using 20mm graded stone aggregate as in columns.
Reinforced cement concretetc M-25 (design Mix) using 20mm graded stone aggregate as in floor or roof beams
Reinforced cement concretetc M-25 (design Mix) using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in 1:6 all as specified and as directed by Engineer-in-charge.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.
M & L TMT bar 10mm dia and over cut to length bend to shape required indd cranking bending spirally for column, hooking ends & binding with and incld mild steel wire (annealed) not less than 0.90mm dia or securing with chips as directed
M & L TMT bar but 5mm dia and over upto and including 10mm dia in stirrups, spacers and bindersincluding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip as directed
M&L rendering 15 mm thick on external faces brick /concrete surfaces other than fair faces of wall in cement mortar 1:4 rendering is to be finished even and smooth (without using extra lime or cement all as specified and directed.
M & L preparation of new decorated surfaces of external walls and applying two coat of cement base paint over a coat of primer complete as specified and directed
M&L for rendering 15 mm thick in CM 1:6 on other than fair face of brick work/ stone wall surfaces finished even and smooth with out using extra cement all as specified.
Preparing new plastered surfaces of wall and applying two coats of oil bound distemper over 1 to 2 mm thick wall care putty over a coat of primer on walls etc all as specified .
M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement including two coat of white wash on ceiling including preparation of surface .
M&L for 25mm thick PCC type BO 1:2:4 (12.5mm graded aggregate in flooring finishing rough to recieveing Top layer for flooring complete all as specified and directed.
Machine cut kota stone flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) (Each stone not less than 55 cms x 55 cms) complete all as pecified and directed.
Machine cut kota stone slab 18-20mm thick in skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) over 15 mm thick rendering in CM ( 1:4) including taking out of existing dado.
S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as spfd.
M&L 35 mm thick 2nd class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), complete all as speciied.
S&F 35mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive gauge etc without sash bar but with lock rail fitted with cut and mitered beads.
S & F Box type Steel ventilators top hung double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.
S & F Box type Steel windows side hung double shutters (inside for wiremesh & out side for glass), incl guard10mm square bar ,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS complete all as shown on drawing No- CEUZ/TD/1302/09 sheet No- 1/3 to 3/3 directed by Engr-in-Charge.
S&F in repair Galvanised mild wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
M&L for PCC (1:3:6) 75 mm thick Type C-2, using 40mm graded stone aggregate as in floors in bed to recive tiles /path tiles etc.
M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match Shade, pattern, laying etc of tiles complete all as specified and directed.
Painting two coats with synthetic enamelled paint over one coat of pink primer on new wooden urfaces of any description exceeding 10cm width/girth including preparation of surfaces
M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified
S&F 3 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, all as specified. Make:Saint Gobain
S & F butt hinges of mild steel cold rolled medium weight of size 100mm as specified.
S&F Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)
S&F Aluminium handles, cast type, anodised Size-150mm, anodised section and fixed complete all as specified. (ISI Marked)
S&F Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed cpmplete all as specified.
M & L for PCC 1:3:6 C-1 (using 20mm graded crushed stone aggregate) as in plinth protection ( 50mm thick ) finished even and fair all as specified.
Surface excavation no t exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil.
S & F in repair mild steel helical/ordinary rat tail rod pattern door spring 300mm including roller and roller plate complete fixed with welding all as specified. Make:- ( ISI Marked)
M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) with average thickness 50 mm laid in two layers of 25 mm thickness each with wire netting of 0.60 mm dia and size of mesh 12 mm x 12 mm laid between the two layers finished even and smoothes in roof padding all as specified and as directed Note:- The wire mesh shall be measured and paid separately under the respective item below.
Supply only 25 mm size, wire netting of galvanized iron chicken mesh, 0.71 mm dia complete all as specified and directed.
Material and labour APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified laid over a coat of bituminous primer @ 0.40 ltr /Sqm & finished with applying bitumen grade 85/25 coat @ 1.2 Kg /Sqm. APP membrane shall be laid by torching with 75mm overlap in longitudinal direction and 100mm overlap in transverse direction all as directed and finished with applying one coat of aluminium paint as directed by Engineer-in-Charge and laid as per paticular specification of CA
M & L for cement conc type D2 1:4:8 (40mm graded aggregate) 75mm thick
M&L machine pressed pre cast concrete interlocking paver ( with grey cement and pigment) any shape and size confirming to IS -15658-2006 of 80 mm thickness ,M-40 grade complete all specified and directed
Excavating in post holes (orsimilar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft soil complete.
Cement concrete in foundations,filling and mass concreteType D2 1:3:6 (40 mm graded coarse agg)
Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracketframing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.
Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws/L-type or J-type or cranked hook bolts as per manufacturer instruction complete all as specified and directed.
Supply and fix 9 W LED bollard light fitting with opal arylic diffuser and IP 65 protection powder coated square extruded aluminium housing. Mushroom Shape Opal acrylic diffuser is fixed in die cast aluminium frames on four sides for pleasant light output with inbuilt driver with 4.5 kV surge protection.Luminaire is provided with a base plate and fixing holes for directly mounting on the concrete pedestal.LEDs mounted on top die cast aluminium housing and can be separated from base plate for easy maintenance. Make HPL cat part No HPLLEDB9W or equivalent in Bajaj,CG,Havells
S & F junction Junction box made from SMC/FRP sheet ready made of size of 195x135x90 mm having MCB SP 6 Amp - 01 10 KA with 4 way connector fixed to bollard light with MS Clamp 25x5 mm and nut bolts etc.
Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 35 Sqmm 3.5 core, complete all as specified and directed by Engineer-in-Charge
Supply, Fixing , Commissioning and testing of CPRI approved outdoor cubical type LT Feeder Piller box suitable for 415 V, 3 Phase , 4 wire 50 Hz , AC Supply system fabricated from stainless steel totally encloused ,dust, weather & vermin proof , 3.00 mm thick for outer shell and 2 mm thick for inner shell having MS section not less than 50x50x6 mm thick having TPN aluminium busbar of capacity 200 Amps mounted on porcelain insulator duly drilled hole for cable connection including front and rear side opening with locking arrangement, with MCCB FP 63 Amp, 16 KA, 415 Volts 50 Hz with adjustable thermal and adjustable magnetic setting and provn for incoming and outgoing cables with glands including control wiring with minimum 1.5 sqmm PVC insulated copper conductor for measuring of voltage, amp with indicators RYB ,painting with two coat of smoke grey synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge. Make: Chandel Electrical & Company, Jaima Electricals Note:- Feeder pillar box shall be mounted on brickwork in CM 1:4 not less than 60 cm above ground level with suitable foundation, rendering 15 mm in CM 1:6 and two coats of cement base paint and the rates shall be inclusive in the quoted rate.
M&L in for three run single core zero halogen flame retardant insulated cable 2.5 Sqmm with unilay copper conductor for connection from junction box to cable laying around the Bollard light and complete all as specified and directed by Engr-in-Charge.
Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 10 Sqmm 4 core, complete all as specified and directed by Engineer-in-Charge
Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit all as specified and as directed by Engr-in-Charge
Taking down ceiling fan any sweep, removing blades ,cleaning the fan completely for dust and dirt, oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete, all as specified and directed by Engr-In-Charge.
M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified for the following;- (a) One light point controlled by one switch 5 Amp.
(b) One ceiling fan/exhaust fan point controlled by one switch 5Amp
(c) One socket out let 5Amp controlled by one switch on same board.
(d) One socket out let 5 Amp controlled by one switch on independent board.
All as per item here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board.
S&F switch piano flush type 5 Amps single pole one way complete,
S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete.
S&F switch socket combination 2 in 1 5 pin 5 /15 Amps flush type complete.
S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated boly complete all as specified and directed.
S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
Supply & fixing Ceiling fan 1200 mm sweep 5 star rated single phase AC 230/240V complete as per model No Fusion of Havells and equivalent in Bajaj / CG with all hooks and angle plate including suitable size with fan rod.
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specified and directed.
S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs.
S&F MCB SPN 63 Amps 10 KA 230 volts "C" series complete
S&F MCB single pole 6 to 30 Amps 10 KA 230 volts "C" series complete
Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 16 Sqmm 2 core, complete all as specified and directed by Engineer-in-Charge
Supply and fixing to GI tubing 40 mm Dia light grade under roads as cable protection pipe all as specified and directed by Engr-in-Charge.
Cement concrete 1:2:4 type B2 ( 40 mm graded aggregate) in foundations, filling and mass concrete (coping of above Ground level).
Excavating in trenches in any type of soil not exceeding 1.5 m wide and n exc 1.5 m in depth and getting out for laying of cables.
Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete.
Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete.
Old size sub class ‘B’ bricks, laid in trenches as cable covers complete (Note :- old serviceable will be reuse)
M & L for sand filling in trenches dry and clean sand unwashed including punning around cables for protection of under ground cable complete all as specified and directed
S&F building security light luminaries energy saving and environment friendly long life LED light of 25W with a minimum system lumen of 2500 Lm and system wattage not exceeding 25W with a nominal system Lumen efficiency 110 lumen/watt. The Ingress protection should be minimum IP 66 with an IK rating of 08. The Luminaries should have 4KV internal surge protection. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters, including GI bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and including two Nos 25x4 mm size flat mild steel clamp made to shape and suitable size nuts, bolts and washers etc including taking down of existing light fitting and complete, all as specified and directed. Make: BAJAJ Cat part No ENXT P 25L WH PO PC SD or equivalent in Wipro/Philips.
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete.
U K Engineering Works
M/S ROMESH KUMAR SHAN
M/S BALWAN SINGH
Kalsi Engineers and contractors
M/S CJ CONSTRUCTIONS
ASHWANI KUMAR KHAJURIA AND SONS
Bidder Name
BHARTI CONSTRUCTIONS
U K Engineering Works
Kalsi Engineers and contractors
M/S CJ CONSTRUCTIONS
ASHWANI KUMAR KHAJURIA AND SONS
M/S ROMESH KUMAR SHAN
M/S BALWAN SINGH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .