Set-up of Oxygen Plant with manifold room, D.G. Shed, Medical Gas Pipe Line networks etc. including Electrical works at Dhirenpara M.C.H., Guwahati-25

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Excavating, Supplying and filling of local earth(inculding Royality) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). Kiln seasoned and chemically treated hollock wood

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement : 3 coarse sand)

Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

Providing, fitting and fixing EURO SERIES aluminium sliding windows and ventilators of 27mmx65mm sections (with minimum thickness 1.5 mm ) ofapproved brands without horizontal glazing bars joints mitred and jointed SS screws/Aluminium Cleat (manufactured to IS:733 and IS:1285 specifications) and providing and fixing handles, angle cleat, EPDM rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.(Glazing to be measured and paid separately) 3 Track sliding window

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

MEDICAL OXYGEN (O2) SYSTEM Supply, Installation, Testing & Commissioning of Oxygen manifold extendable type complete with middle frame with chain for individual cylinder (bulk cylinder D type) along with Non-Return valves for every cylinder and high pressure annealed copper tail pipes with 1 end having brass adaptor and other end suitable for manifold non return valves and manifold will have 10 brass non return valves for individual oxygen cylinder, middle frame with circumferential M.S. Flat duly powder coated all as specified and as directed. Conforming to 3 digit CE Mark with ISO 9001-2015 certified Organization IV) 4+4

Supply, Installation, Testing & Commissioning of Automatic Digital Gas Control Panel for O2 Features:- i) The control panel cover is made using high quality M.S. Duly powder coated. ii) The supply of Gas does not depend on electricity. iii) Display is provided with built-in led to indicate high, normal and low line pressure. iv) Panel cover is fitted with lock to prevent unauthorized access, and can be swing open for maintenance. v) It includes pressure gauge (63mm) that indicated the gas pressure of each header and pipe line distribution pressure. vi) Capable to supply a distribution flow rate in excess of 2500 LPM. vii) Manufactured by CE certified/ ISO 9001-2015 Organization. viii) Easy usage and maintenance.

Supply, Installation, Testing & Commissioning of Terminal Units (Oxygen Gas Outlets) with probes/ Adaptors as per CE certified/ ISO certified Organization.

Supply, Installation, Testing & Commissioning of Oxygen Flow meter, made with chrome plated brass body. Graduated flow tube and cover made of polycarbonate unbreakable. Adjustable flow by needle valve knowb with micrometrical regulation. Humidifier bottle is made of unbreakable polycarbonate material and is autoclavable.

Supply, Installation, Testing & Commissioning of Low Pressure Tubing Flexible having antistatic Core as per ISO standards with proper colour coded for O2, N2O, Compressed Air and Vacuum complete all as specified and directed. 5mtr long

O2 Ventilator Probe

Supply, Installation, Testing & Commissioning of 1000 Ltr Air Receiver Tank with safety valve

Supply, Installation, Testing & Commissioning of Bacterial filter Assy.

MEDICAL VACUUM SYSTEM Supply, Installation, Testing & Commissioning of INGERSOLL RAND/ ANESTIWATA MOTHERSON vacuum Pump with accessories, base mounting,Capacity: 10 HP Duplex 10 HP each Double Stage Vacuum pump including necessary Vacuum Accessories Like Silencer, Receiver Tank (1000 Ltr) & Vacuum Bacteria Filter.

Supply, Installation, Testing & Commissioning of Ward Vacuum Unit with Regulator along with Vacuum guage ,collection jar of 600ml capacity reusable plastic collection bottle with overflow safety tap wall mounted type with bracket complete all as specified and as directed

Supply, Installation, Testing & Commissioning of Oxygen flow meter made with chrome plated brass body.(IOX 14 type)

Horizontal Bed Head Pannel Supply, Installation, Testing & Commissioning of horizontal Bed Head pannel 5ft long CE Marked,Excluded pannel, powder coated along with accessories like III hook (O2-2 nos; Air-1 no) utility BP Basket, Monitor Tray, Aluminium clamp for ward vaccum unit , LED Examination light, and anti bacterial switch & socket 3 Nos.

Copper Pipes Solid drawn, seamless, de-oxidized, non-arsenical, half-hard, tempered and de-greased copper pipe conforming to latest BS EN 13348 :2001 and manufactured as per BS : 2871, 1971 Part I, Table X (or as per EN1057). All copper pipes will be de-greased & delivered capped at both ends. The pipes will be accompanied with manufacturers LLOYD test certificate i) 12mm OD x 0.7mm Thick

ii) 15mm OD x 0.9mm Thick

iii) 22mm OD x 0.9mm Thick

iv) 28mm OD x 0.9mm Thick

v) 42mm OD x 1.2mm Thick

Supply, Installation, Testing & Commissioning of Area Line Pressure Alarm with displays for various faults indications and capable of monitoring maximum 5 medical gas service by means of pressure switches etc with audible warning with automatic reedit when the gas service returns to normal as per standard specifications all as specified and as directed for the following Area Line Pressure Alarm:- ii) 3 Gas Line Pressure Alarm

Supply, Installation, Testing & Commissioning of Isolation Valves with brass body with nickel plate valves operating handle suitable for 15mm OD copper pipe to 76 mm OD copper pipes with brass adapter as per standard specifications all as specified and as directed for the following Isolation Valves:- 12mm OD

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supply,Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1 or 2 Module

3 Module

4 Module

6 Module

8 Module

12 Module

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2 + 12 way, Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

6 way (4 + 18), Double door

8 way (4 + 24), Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 way (4 + 36), Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral

Double pole

Triple pole and neutral

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 95 sq. mm (45mm)

3½ X 150 sq. mm (50mm)

3½ X 300 sq. mm (50mm)

4 X 16 sq. mm (28mm)

Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 300 sq. mm

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Up to 450 mm sweep

510 mm sweep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 600 mm width X 75 mm depth X 2.0 mm thickness

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 100 mm dia

150 mm dia

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 63A

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 315 Amp, 35 KA, TPMCCB

400 Amp, 35 KA, TPMCCB

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

Supply of Medium class GI pipe for running of UG cable of 80mm dia.(Jindal make)

Supply of Medium class GI pipe for running of UG cable of 100mm dia.(Jindal make)

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supply of surface/ pendant mounted extruded Aluminium batten 2 ft. runnining length with multiple lumen packages and suitable for surface /wall and conduit mounting(with all accessories, fitting model BN021C LED 22S PSU CW GR, Philips make)

Supply of surface/ pendant mounted extruded Aluminium batten 4 ft. runnining length with multiple lumen packages and suitable for surface /wall and conduit mounting(with all accessories, fitting model BN021 LED40S PSU CW GR, Philips make)

Supply of Recess mounting green perform low height LED circular down lighter, Robust PDC Housing ensures long system and narrow rim (with all accessories, fitting model DN 295B LED10S 6500PSU WH., Philips make)

Supply of light duty 300mm sweep,Aeroclean Plus DBB GBD metalic exhaust fan in the existing hole of the buildintg,(Usha or equivalent make).

Supply of heavy duty 600mm sweep,900rpm metalic exhaust fan in the existing hole of the buildintg, turbo force HDEF (Single Phase).(Usha or equivalent make).

Supplying of following sizes XLPE insulated and PVC sheathed aluminium conductor armoured power cable of 650/1100 V grade conforming to IS 7098 (Part - I) / 1988 with amendment up to date etc as required. 4x16 sqmm.

3x1/2C 95sqmm.

3x1/2C 150sqmm.

3x1/2C 300sqmm.

Supply, installation, testing & commissioning of 315 Amps Distribution panel Board made out with 1.6 mm CRCA sheet steel, 3-phase, suitable for floor mounted, user front facia, powder coated for long lasting finish, cubical type, suitable cable entry provision and including of all necessary electrical protections including Aluminium Bus bar etc.

Supplying of 400 Amps Transformer incoming panel Board made out with 1.6 mm CRCA sheet steel, 3-phase, suitable for floor mounted, user front facia, powder coated for long lasting finish, cubical type, suitable cable entry provision and including of all necessary electrical protections including Aluminium Bus bar etc.

Supplying of 250 Amps Distribution panel including installation, commissioning of vermin and dust proof totally enclosed, Phosphatized powder painted cubical inddor type floor/ wall mounting compartmentalize panel board.

Suppy, Installation, Tesing and commissining of 250 KVA "KIRLOSKAR" make diesel Engine 6SL1500TA G3 liquid cooled turbo charged with after cooler, developing 310HP 6 cylinder, inline type, electric start, compression ignition, 4 stroke designed to run continously 1500 RPM confirming to IS 10001 ISO-3046, BS-5514 standard with an overload capacity of 10% for one hour in every 12 Hrs.Diesel Engine will comply with present CPCB-II norms and will be directly coupled to a KIRLOSKAR(KOEL GREEN) A.C Generator capable of developing 750KVA/600KW. KOEL GREEN make alternator is suitable for continous operation rated at 1500 RPM, 415V,0.8PF ,50Hz, 3Ph in SPDP enclosure, self excited and self regulated, brush -less, floor mounted with ball or bearings on end shields.The Alternator efficiency is as per IS 4722 & IEC 34-1 standards and will be suitable for tropical condition.(Genset Model-6SL1500TAG3, KVA=250, HP=310, KW=200, PHASE=3 with AMF Panel).

Supply installation testing and commissioning of 2 KVA online UPS system including necessary battery bank (8 nos. 12V 26 AH VRLA SMF).(including taxes)

Supply installation testing and commissioning of 10 KVA online UPS system including necessary battery bank (28 nos. 12V 26 AH VRLA SMF).(including taxes)

Supply installation testing and commissioning of 250KVA oil cooled, outdoor type, servo controlled voltage stabilizer 3 phase input and 3 phase output in unbalanced load with low cut, High cut (Input and output) withoverload protection and first filling of 700 ltrs. oil. Capacity:250 KVA, 3 phase (4 wire) 50Hz. AC supply.Input voltage range:330V-470V AC. Output Voltage:415V+-1%.(Orion make:Model:Omega 33 series)

Supply installation testing and commissioning of 1 Tr, 3 star Blue star make Inverter type Split A.C machine including voltage stabilizer(Model IC312YLTU).

Supply installation testing and commissioning of 1.5 Tr, 3 star Blue star make Inverter type Split A.C machine including voltage stabilizer(Model IC318YB).

Supply installation testing and commissioning of 2 Tr, 3 star Blue star make Inverter type Split A.C machine including voltage stabilizer(Model IC324YAT).

Video/Audio Input: IP video input: 32-ch, Two-way audio input: 1-ch, BNC(2.0 Vp-p, 1kΩ),Incoming bandwidth: 200Mbps, Outgoing bandwidth: 160Mbps,Remote connection: 128,CVBS Output:1-ch, BNC(1.0Vp-p, 75Ω) Resolution: 704×576(PAL); 704×480(NTSC),HDMI Output: 1-ch, resolution: 1920*1080P/60Hz, 1920*1080P/50Hz, 1600*1200/60Hz, 1280*1024/60Hz, 1280*720/60Hz, 1024*768/60Hz, Recording Resolution: | 8MP/ 5MP/3MP/1080P/UXGA/720P/VGA/4CIF/DCIF/2CIF/CIF/QCIF, Audio Output: 1-ch, BNC(Linear Electrical Level, 600Ω), Synchronous Playback: 16-ch, VGA Output: | 1-ch, resolution: 1920*1080P/60Hz, 1600*1200/60Hz, 1280*1024/60Hz, 1280*720/60Hz, 1024*768/60Hz, Live view Playback: 5MP/3MP/1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF /QCIF, Capability: 16-ch@720P, 8-ch@1080P, SATA: 2 SATA interfaces for 4 HDDs + 1 DVD-R/W (default), or 8HDDs, Interface Type: 1 SATA interface, Capacity: Up to 6TB capacity for each HDD, Array type: RAID0, RAID1, RAID5, RAID10, Network Interface: | 2 RJ-45 10/100/1000Mbps self-adaptive Ethernet interfaces, Serial Interface: RS-232, RS-485, Keyboard, USB Interface: 3, USB2.0, Alarm In: 4-ch, Alarm Out: 2-ch, Power Supply: 100 ~ 240 VAC, 6.3 A, 50 ~ 60 Hz, Consumption (without hard disk and POE): ≤ 45 W, Working Temperature: -10 ºC ~ +5 ºC (+14 ºF~ + 131 ºF), Working Humidity: 10 % ~ 90 % (CAMERA NVR 16CHANNEL,MAKE:HONEY WELL.) 1 Pcs Seagate (preferred) 3.5-inch, Capacity: 6TB, NVR-Ready, 164 cameras, 550 TB/year, 3 years warranty (Hard Disc for Camera 6TB) 1 Pcs 2 Megapixel (1920 x 1080) High Resolution, HD720p Realtime Video Recording, True Day / Night, IP66 Rating, IR Range: Up to 30m, Vandal-proof Housing, 3 ROI. IE / Firefox Browsing, CMS control(Bullet camera, Make Honey Well 8 Pcs 2 Megapixel (1920 x 960) High Resolution, HD 720p Realtime Video, True Day / Night Auto Switch, IP66 Ingress Protection, IR LEDs up to 30m, Vandal-proof Housing, 3 ROI. IE / Firefox Browsing, CMS control(Dome Camera, Make Honey Well) 8 Pcs 10/100/1000 24 PORT ALL POE SWITCH WITH 2 SFP UPLINK PORT 24 PORT POE SWITCH GIGA (Make: NETGEAR) 1 Pcs FINOLEX 0.5X4 PAIR UTP CAT 6 LAN CABLE (305MTR) ROLL CAT6 WIRE MAKE: FINOLEX 1210 Mtr. NETRACK 6U/500 CKD WITH GLASS DOOR, FAN PDU. 6U Rack MAKE:NETRACK 1 DLINK (RJ45 Connector) 40 Pcs PATCH PANEL & PATCH CORD PATCH PANEL MAKE: DLINK 1 PATCH CORD 1 MTR PATCH CORD MAKE: DLINK 16 Mtr. INSTALLATION, COMMISSIONING & PROFESSIONAL ENGINEERING CHARGES 1 Job 1” PIPE – BEND- FLEXIBLE PIPE-TIE 365 Pcs

Repairing of 250KVA Transformer Supply, fitting and fixing of transformer bushings.-2 Each Heat curing and tanking of transformer. 2 Each Oil filter and filling after dehydration of transformer.-160-Ltr Supply,fitting and fixing of transformer new gasket set complete. 2 Each Cleaning, painting and varnishing of transformer tank both inside and outside. 2 Each Supply of Silica gel breather. 2 Each Supply of Drop out fuse assembly.- 2 set Supply of gang operating device.- 1 set RC/DC Charges.-1 job Testing of transformer 1 job

Supply , installation, testing and commissioning of fire fighting systems. 1) Supply of CO2 22.5Kg. Capacity fire extinguisher IS:15683(Make : Eversafe/ Minimax)-- 2 nos 2) 4.5kg. Capacity CO2 type fire extinguiser.IS:15683(Make : Eversafe /Minimax) - 4 nos 3) AFFF 50 Ltr. Capacity fire extinguisher IS:15683(Make : Eversafe/Minimax) - 1 nos 4) AFFF 09 Ltr. Capacity fire extinguisher IS:15683(Make : Eversafe/Minimax) - 1 nos

Tribeni Constructions Limited