Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹7.5 LAdmitted-Finance F 49 MAGZINE ROAD DELHI 110054 | CENTRAL | DELHI | 110054 | -15.00% | ₹7.5 L | L1 | Admitted-Finance |
| 2 | L2₹7.9 LAdmitted-Finance | -11.00% | ₹7.9 L | L2 | Admitted-Finance |
| 3 | L3₹8.0 LAdmitted-Finance | -9.98% | ₹8.0 L | L3 | Admitted-Finance |
| 4 | L4₹8.1 LAdmitted-Finance | -8.00% | ₹8.1 L | L4 | Admitted-Finance |
Tender Value
₹8.8 L
EMD Value
₹17,693
Closing Date
16 Dec 2025, 1:00 pmClosed
Executive Engineer
12, Cavalry Lane, Engineering Department, University of Delhi, Delhi-110007
Providing and fixing working tables with granite top and cupboards for storage Lab no.217 etc, Department of Zoology, University of Delhi
2025_DU_888434_1
CEET-7131
Open Tender
Civil Works
30 days
North Campus
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
Registrar, University of Delhi
₹17,693
11 Mar 2026
4 Dec 2025
17 Dec 2025
4 Dec 2025
16 Dec 2025
4 Dec 2025
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid ove20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm
French spirit polishing : Two or more coats on new works including a coat of wood filler
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work.
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling nand dash fasteners to be paid for separately) :
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Providing and fixing a cupboard with a maximum depth of 600 mm, cosstructed using 18mm thick HDHMR board (Action Tesa, Green ply, Century) for the shelves, sides, top, bottam and shutters, The back panal shall be made of 5.5mm thick ply ( Action Tesa, Green Ply, Century ) and laminated with 1mm thick sunmmica (Merino make) as required. The work includes all necessary fittings and fixxtures, completed as per direction of Engineer in charge. (Front area messurment will be made for face/front of cupboard taken for payment)
Providing and fixing a cupboard with a maximum depth of 700mm, cosstructed using 18mm thick HDHMR board (Action Tesa, Green ply, Century) for the shelves, sides, top, bottam and shutters, The back panal shall be made of 5.5mm thick ply ( Action Tesa, Green Ply, Century ) and laminated with 1mm thick sunmmica (Merino make) as required. The work includes all necessary fittings and fixxtures, completed as per direction of Engineer in charge. (Front area messurment will be made for face/front of cupboard taken for payment)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.47 MB
BOQ_933801.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid