Loading
Loading…
Loading…
Tender Value
₹3.8 L
EMD Value
₹7,523
Closing Date
3 Sept 2026, 10:00 am
EE/MED
Office of the Executive Engineer Metropolitan Electrical Division Block-DF, Sector-I, 4th Floor, Jalasampad Bhawan, Salt Lake City, Kolkata -700091
Replacement of 2 nos. Draw shutter, improvement of hoisting arrangement including ss lining embedded frame and painting, Cross bandth at Pukurpar and nearby localities, Block-Amta II, P.S- Joypur, Dist. Howrah.
2026_IWD_5018952_7
WBIW/EE/MED/e-NIT-18/2026-27
Open Tender
MECHANICAL
Percentage
84 days
PUKURPAR, AMTA-II
Please refer Tender documents.
6 documents required · 6 mandatory
₹7,523
19 Aug 2026
19 Aug 2026
3 Sept 2026
19 Aug 2026
3 Sept 2026
19 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Taking out flap shutter of sluice gate including hoisting arrangement and refitting the same with new nut and blots where necessary. | |||||
| 1.01 | Up to 4.00 sq.m., Taking out and refitting the same. | 12 | Sq Mtrs | 377.8 | ₹4,533.6 |
| 1.02 | Up to 4.00 sq.m., Taking out only. | 11 | Sq Mtrs | 202.61 | ₹2,228.71 |
| 2 | Fabrication , Supply, erection and commissioning of new Slide type vertical lift regulator service gates of Canal/River as per IS: 5620 - 2000/Latest Revision consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, Aligning, drilling, Welding, Finishing, Consumables,Carriages and all overheads with all leads and lifts complete as per specification (without painting).
Width of Gate shutter size upto 2 metre. | 646.46 | Kg | 154.93 | ₹1,00,156.05 |
| 3 | Cost for repairing of vertical/flap gate shutter of canal/river including dismantling the damaged portion at lower part (skin plate, horizental/ vertical girder/stifner etc as per IS : 2062 - 2011 /latest revision) not more than 25% of gate hight from bottom by gas cutting and fitting, fixing and fabricated by welding as per direction including cost of Materials, Machinaries , Manpower, Cutting, ligning, nchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting)
Width of Gate shuteer size upto 2 metre | 159.35 | Kg | 213.33 | ₹33,994.14 |
| 4Cost for supplying and fitting fixing of angle type rubber seal (Make : Universal Moulders &Engineer/Popular Rubber Works (Pvt) Ltd/SAB Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate shutter as per direction of E.I.C. The cost includes cost of man power employed for fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate,bolts, nuts and washer. | |||||
| 4.01 | Size (88 mm +60 mm+08 mm) x 14 mm thick | 20 | RM | 2,365.72 | ₹47,314.4 |
| 5 | Fabrication, supply, erection and commissioning of embeded parts consisting of hinge bracket with its accessories for vertical flap gateshutter of distributories/ branchcanal/ minor anal/channel made of MSmaterial consisting of angle,channel, beam, plate, flat, etc. conformingto IS : 2062 -2011/latest revision manufactured as per approved drawing and direction of Engineer in charge. The cost includes cost of Materials, Machinaries , Manpower, Cutting, Aligning, Anchoring,Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting). | 85.72 | Kg | 312.25 | ₹26,766.07 |
| 6 | Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed.16 mm dia bolt. 300 mm long | 12 | Each | 102.49 | ₹1,229.88 |
| 7 | Supply of Structural M.S Bolt/Nut/Washer (Hot dipped Galvanised) | 6 | Kg | 137.06 | ₹822.36 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.04 MB
Tendernotice_2.pdf
PDF • 0.43 MB
BOQ_5090561.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].