Construction of new panchayat office building at marakunam panchayat of Pernamallur Block Thiruvannamalai Dist- AGAMT II (V.Pt) -2023-2024

Amount

Construction of New Panchayat office Building at marakkunam Panchayat of Pernamallur BlockThiruvannamalaiDist AGAMT II 2023 2024

Earth work excavation for foundation and depositing on bank with initial lead of 10 mts and initial lift of 2.0 in hard stiff clay stiff black cotton soil, hard red earth shales, murram, gravel, stoney earth and earth mixed with 50% fair sized boulders and gravelly soil etc., complete for boxing as per IS 20A.

collection and supply of earth including cost and conveyance and all labour charges etc complete

collection and supply of sand filling including cost and conveyance and all labour charges etc complete

Base course concrete with C.C.1:4:8 mix using 40mm I.S.S. size HBG metal from approved quarry to work site including cost and conveyance of all materials and labour charges for mixing for base course as per standared specification.

Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc. Ramp wall inside for Building, Ramp wall outside for Building

Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc. Ramp wall inside for Building, Ramp wall outside for Building

RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc.

Column above Grade beam

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc.

Roof & Roof Beam

Supply and fabrication of steel including cost and conveyance and alla labour charges etc. complete.

Construction of Granular Sub base by providing well graded Weathering coarse concrete using 20mm size broken brick jelly with in pure slaked lime over the RCC Roof in the proportion of 32 : 12 1/2 by volume laid in layer beating the concrete with the wooden batters etc as per standard specifications .

Finishing the top of roof with one course of Pressed tiles conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.

Plastering with cement mortar 1:3, 10mm thick including cost and conveyance and all labour charges etc.

Providing granolithic 25mm thick flooring using 10 to 012mm ISS metal including cost and including cost and conveyance and all labour charges etc,.

Paving the Floor with scratch proof vertified tiles of size 600x600x8mm laid in CM 1;2,10mm thick and pointing with white cement 0.40kg per sqm mixed with colouring pigment to siut the colour of the tiles including cost and conveyance of all materials to site and all labour charges etc complete

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes 150mmX 150mmX 6mm set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc.,

Towards the cost of steel door of size 1.10 mx2.1m including all charges etc.

Manufacturing Supplying and fixing of stainless steel Hand rails for near wet raiser using 50mm dia 304L Grade Stainless steel pipe of 1.60mm thick thick will be provided with tubler supports made of 304L Grade Stainless steel pipe of 25mm dia of 1.60mm thick welded to the railing. the rate included for grouting into concrete with necessary supporting arrangements the hand railin floor polishing buffing ,cutting grinding,conveyance and welding charges ,electrical charges etc complete

Towards the cost of steel grill gate of size 1.50mx2. 1 m including all charges etc.

Solid PVC Door shutter using 19 guage 19mm MS sq. tubes for styles and outer frames, 15mm MS sq. tubes for top, lock and bottom rails. The steel tubes shll be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable suitable rabate for housing the shutter.

Towards the cost of steel window of size 1.2m*1.3m including all charges

Towards the cost of steel Rolling shutter of size 1.2mx2.10 m including all charges etc.

Painting two coat with approved quality of distemper with colour over one coat of white cement for primier coat for the base including preparing surface and all materials cost labour etc

Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.

Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc.

Provision for electrification arrangements with service connection

LIGHT POINT SD 20

15 Amps fuse unit

FAN point SD112

Plug point (SD38)

CFL lamp (SD80)

TUBE Light Fittings ( SD 88 )

DPI swtich of 500 V (SD142)

G I Pipe (SD69)

Service Wire (SD64)

Bulk head fitting (SD83)

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

M Murugan