Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹35.8 L+₹3.3 L (10.2%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹36.1 L+₹3.5 L (10.9%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹38.2 L+₹5.7 L (17.6%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹38.3 L+₹5.8 L (17.8%)Rejected-Finance 22B HEMILTAN ROAD GEORGE TOWN PRAYAGRAJ UP 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
21 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST PRAYAGRAJ
GE WEST PRAYAGRAJ PIN-211001
ADDITIONAL / ALTERATION SPL REPAIR WORK TO CERTAIN BUILDING, OFFICERS MESS, GUEST ROOM, TOILET BATHROOM AT CARIAPPA ROAD, SCE, GT CETFBN GR NEW CANTT PRAYAGRAJ UNDER GE WEST PRAYAGRAJ
2023_MES_611614_1
8675/E8
Open Tender
Civil Works
Item Rate
180 days
GE WEST PRAYAGRAJ
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE WEST PRAYAGRAJ
₹1 L
Yes
19 Oct 2023
1 Aug 2023
22 Aug 2023
1 Aug 2023
21 Aug 2023
15 Aug 2023
Amount
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing debris complete all as specified and directed
M&L for 75 mm thick cement concrete 1:3:6 type C1 using 20 mm graded stone aggregate in plinth protection finished even and fair including necessary form work and cutting of joints using extra cement etc complete all as specified.
Demolition of brickwork masonry built in lime or cement mortar including all quiens arches , pillars etc. but including concrete articles complete all as specified and directed.
M & L Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed
M & L Brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed
M & L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in 1:4 CM complete all as specified and directed
Taking down cement plaster on brick wall or stone wall etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 10mm thick in CM 1:3 on ceiling surfaces of RCC or brick complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 on ceiling of RCC or brick finished fair and even without using extra cement. complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
S&F mild steel 125x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed and similar work confirming to Fe 290 Gde-E-165 complete all as specified.
M&L for second class hardwood 30 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
S&F 2nd class hardwood factory made door, 35 mm thick, glazed and skeleton shutters, open rebated and prepated to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded materials and rebated sash bars any number , edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (a) complete all as specified & directed.
S&F MS work such as holdfast ,staple,clamps,etc and similar small article etc conforming to Fe-290-0 grade E-165 complete all as specified and directed.
S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F of galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks of galvanised wire staples complete all as specified and directed.
S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete as all specified and directed.
S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed.
S&F 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm long aluminium alloy floor door stopper ,fabricated type complete all as specified and directed.
S&F 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or extruded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed.
S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.
M&L for PCC 1:3:6 type C-1 using 20 mm stone aggregate as in fixing of holdfast including necessary form work and like complete all specified and directed.
M&L for factory made uPVC white colour sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+/ - 0.2mm), window profile with hollow section with multi chamber. Frame of size 88mm x 52mm, sliding sash of size 42mm x 67mm, sliding mesh Sash of size 42mm x 57mm, sliding interlock (One vertical length in each shutters) of size 45.5mm x 28mm, Glazing bead 24.5mm x 16mm will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 +/ - 0.2mm thick galvanised steel Frame of size 30mm x 18mm, 2 nos, sliding sash 30mm x 18mm, sliding mesh sash 26 mm x 10mm profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. Note: (i) The unit rate quoted by contractor shall be deemed to include all other connected accessories. (ii) Area of glass shall be measured & paid separately under relevant item. (iii) Net Opening will be measured lor payment purpose.
S & F for Anodised alumium grill (anodised transparent or dyed to required shade according to IS 1868 with miniumum anodic coating of grade AC 15 of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm center to center, including cutting to grill to proper opening for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed.
S&F 4.8 mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane new door / window shutter complete all as specified and directed.
S&F 5.5 mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane new door / window shutter complete all as specified and directed.
S&F 4.0 mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane new door / window shutter complete all as specified and directed.
S&F 3mm thick figured glass pin head type in square n.exc 0.5 Sqm in each pane for new ventilator / window shutter complete all as specified and directed.
M & L for cement concrete 1:4:8 type D2 using 40 mm graded aggregate in foundations, sub base filling and mass concrete complete all as specified and directed
Excavating in post holes (or similar holes) in soft / loose soil each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm ,watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.
S & F for Fe- 290 Gde E- 165 Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. cut to ordinary lengths i.e. within 20mm of the length indicated complete all as specified and directed.
M&L for MS screw bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut exceeding 5 cm and not exceeding 10 cm long complete all as specified and directed.
S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire
Supply only chain link fencing of size 100mmx100mm, 4mm dia complete all as specified and directed
M&L for galvanized 2 strand 2.24 mm dia steel barbed wire, barbed with 2mm dia barbs at 75mm (approx.) spacing and straining and fixing to any type of post, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and as shown on the drawing including straining bolts complete all as specified, directed and shown on drawings. Note:-Each line of wire to be measured separately
S & F steel work in tubular trusses, purlins, rafter, column where connected common rafter and running rails fixed with angle cleat or other common plates including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc.15 cm thick, above or below ground level including floor tiles complete all as specified and directed.
M&L for 50 mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor complete all as specified & directed.
Dismantling of stone slab or tiles of any description or thickness in floors etc laid bedded & pointed in any mortar complete all as specified and directed.
S&F 14 to 20mm thick rubberized gym flooring in interlocking or V groove cut pattern with fixing arrangement of adhesive (tytex PC canister adhesive or cyanoacrylate instant adhesive & similar adhesive) for base and side gap to be filled with heavy duty sealant (tytx ultraclear MS polymer adhesive sealant or similar sealant complete all as specified and directed as per manufacture instruction complete all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M & L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n exc 0.18 Sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
M & L for dark shade double charged / wooden texture vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
M&L for glazed ceramic coloured wall tiles in vertical surface 450 X 300 X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified.
M&L for chequered cement concrete tiles with mixture of grey cement and pigments of size 30cm x30cmx25mm thick set in cement mortar jointed & pointed, laid over 15 mm thick screed bed in CM 1:6 finished with pigments match the shade of tiles complete all as specified and directed.
M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) including the screed bed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations compete all as specified and as directed.
M & L for 25 mm thick plain cement concrete 1:2:4, type B0 using 12.5 mm graded stone aggregate as in levelling course of floor and other similar works complete all as specified and directed
M & L for Reinforced cement concrete 1:2:4 using 20 mm graded stone aggregates as in kitchen shelves, slab supported on wall, roof beam complete all as specified and directed. Note:- Reinforcement to be measured & paid separately under respective item.
Use & waste of formwork to soffits of suspended slabs such as kitchen shelves and similar work not exceeding 200mm thick or lintel / beam (Horizontal or sloping) complete all as specified and directed
M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Cutting holes in full brick walls, built in cement mortar for inserting of sunken pipe , holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tank of capacity 500 ltr (Cylindrical/vertical with closed top) double layer construction, ISI marked hoisted & fixed in position complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tank of capacity 1000 ltr (Cylindrical/vertical with closed top) double layer construction, ISI marked hoisted & fixed in position complete all as specified and directed.
S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.
S & F in repairs vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts, plastic water closet white. seat cover closed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
S & F in repairs flushing jet for pedestal pattern WC including flexible pipe and brass CP nuts, complete all as specified and directed.
S & F in repairs suitable for 15 mm dia health faucet abs body with 8 mm dia 01 mtr long flexible tube & wall hook complete all as specified and directed.
S&F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.
S & F in repairs PVC connection 450 mm long, 15 mm size with brass chromium plated nuts complete all as specified.
S & F in PVC connection 600 mm long, 15 mm size with brass chromium plated nuts complete all as specified.
S&F in repair bib taps fancy type with crutch or butter fly handle, chromium plated with screwed down, screwed for iron pipe or for brass ferrule ,15mm bore complete all as specified and directed.
S&F in repair CP angle stop valve or cock fancy type of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed.
S&F in repair vitreous china wash basin oval type under over counter shape of size 550x460 mm laid over stone slab including brackets of approved size including necessary cutting for and pinning in ends of brackets in cm 1:3 including 32 mm dia Chromium plated waste coupling complete all as specified and directed
S&F in repair fancy type Pillar tap 15mm bore swan neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S & F in repairs 600 mm long tubular towel rail , brass chromium plated of 20 mm dia complete all as specified and directed.
S & F in repairs ornamental looking mirror of fancy type 5mm thick glass , with chromium plated beading incl polishing complete all as specified and directed.
S&F in repair 15mm bore Chromium plated two way angle cock / two way bib tap with flange Chromium plated half turn cast copper alloy with long shank and cup screwed down complete all as specified & directed.
S&F in repair 32 mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm white in colour fixed in repairs to walls or laid in floors including all fittings such as bend, elbow, tee etc complete all as specified & directed.
S&F vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting, pipe and union complete all as specified and directed.
S & F Pillar taps of 15 mm bore swan neck, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed
S&F CP angle / stop valve or cock fancy type of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed..
S&F WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed.
S&F vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including 32mm dia CP coupling, CP urinal spreader with CP pipe up to angle cock, waste pipe etc with all fixing arrangement and pointing around urinal back complete all as specified and directed.
S&F in repair 15mm stop cock concealed body for but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed.
S&F in repair brass chromium plated shower rose 90 to 125mm size complete all as specified and directed.
S&F in repair CP soap dish brass chromium plated Round/oval shaped fixed to wall with PVC gutty and CP screws complete all as specified and directed.
S&F in repairs Stainless steel grating dome 100 mm dia with or without waste holes as required complete all as specified.
S & F vitreous China white wash down water closet pan 250x585x415mm wall hung including fixing bolts,UF soft close seat cover, hinging device complete all as specified and directed. Make : Jaquor Cat part ONS-WHT-10853S300UFSM or equivalent make as specified in P.S.
S&F for Maze overhead shower 200 mm round shape single flow (body & face plate SS with chrome finish) with rubit cleaning system complete all as specified and directed. Make :Jaquor Cat part OHS-CHR-1613 or equivalent make as specified in P.S.
S&F for concealed body for 3-inlet single lever diverter with button assembly , cartridge sleeve but w/o exposed parts complete all as specified and directed. Make :Jaquor Cat part ALD-CHR-193 or equivalent make as specified in P.S.
S&F for single lever exposed parts kit of HI-FLOW diverter consisting of operating lever cartridge sleeve wall flange (with seals)button assembly sleeve & button (compatible with ALD-079N) complete all as specified and directed. Make :Jaquor Cat part OPP-CHR-15079NKPM or equivalent make as specified in P.S.
S&F for opal prime bath tub spout with wall flange complete all as specified and directed. Make :Jaquor Cat part SPJ-CHR-15429PM or equivalent make as specified in P.S.
S&F for SS towel rack 600 mm long without lower hangers but with 3 hooks complete all as specified and directed. Make :Jaquor Cat part ACN-CHR-1181FHS or equivalent make as specified in P.S.
S&F for corner glass self (with bracket) complete all as specified and directed. Make :Jaquor Cat part ACN-CHR-1173 or equivalent make as specified in P.S.
S&F for shower arm 20 mm dia and 450 mm long round shape with 90 degree bend for wall mounted shower with flange complete all as specified and directed. Make :Jaquor Cat part SHA-CHR-479L450 or equivalent make as specified in P.S.
S&F for vitreous china wash and basin thin rim table top basin of size 415x415x145mm shape round complete all as specified and directed. Make :Jaquor Cat part OPS-WHT-15905 or equivalent make as specified in P.S.
S&F for waste coupling 32mm size full thread with 130mm height complete all as specified and directed. Make :Jaquor Cat part ALD-CHR-705L130 or equivalent make as specified in P.S.
S&F for bottle trap (with internal partition ) 32mm size with 300 mm & 190 mm long wall connection pipes & wall flanges complete all as specified and directed. Make :Jaquor Cat part ALD-CHR-769L300X190 or equivalent make as specified in P.S.
S&F for single lever tall boy with 150 mm extension body fixed spout without popup waste system with 600mm long braided hoses complete all as specified and directed. Make :Jaquor Cat part OPP-CHR-15005BPM or equivalent make as specified in P.S.
S&F for angular stop cock with wall flange complete all as specified and directed. Make :Jaquor Cat part OPP-CHR-15053PM or equivalent make as specified in P.S.
S&F for soap dispenser with glass bottle complete all as specified and directed. Make :Jaquor Cat part ACN-CHR-1135N or equivalent make as specified in P.S.
Cutting holes in brick walls in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for purpose made cutting and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required in full brick wall complete all as specified and directed.
Taking up or down 15 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed
Refixing old 15 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed
S&F 15 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.
Taking up or down 20 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed
Refixing old 20 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed
S&F 20 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.
S & F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to wall or laid in trench or in floor complete all as specified and directed.
S & F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to wall or laid in trench or in floor complete all as specified and directed.
S & F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S & F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S & F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S & F in repair 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S & F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed.
S & F 110 mm bore PVC (SWR) vent cowl complete all as specified.
S & F in repairs PVC (SWR) floor trap plain with grating incl joining with solvent cement, dia of outlet 110 mm bore complete all as specified and directed.
M&L for preparation of newly plaster surface of ceiling and applying two coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surface and applying three coats of white wash complete all as specified and directed.
M&L for preparation of old decorated surface of ceiling and applying one coat of white wash on ceiling complete all specified and as directed.
M&L for preparation of new plastered surface of wall and applying 1-2 mm thick wall care putty to achieve a smooth finish surface and apply two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.
M&L for preparation of old existing plastered surface of wall by complete removal of existing treatment by scraping with metal plate, wire brush etc and applying 2 mm thick wall care putty to achieve a smooth finish surface and apply two coats of oil emulsion distemper complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over & including one coat of primer complete all as specified and directed.
M&L for preparation of old decorated/ plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of old plastered surface of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 5489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
M&L for preparing new plastered decorated surfaces of wall with two coat of 1mm thick wall care birla putty and finish the walls by applying two or more coat of acrylic smooth exterior paint of required shade @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm) complete all as specified and directed.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of new wooden surface exc over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
Demolition of plain cement concrete in any position including Tar felt cement mortar bedding etc complete all as specified and directed as specified
M&L for plain cement concrete 1:2:4 type B-0 12.5mm graded stone aggregate as in roof padding, roof kerbs, benching on roof slab and other similar works laid as per slop required finished even and fair complete all as specified and directed.
M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed. Note : WPC to be measured and paid separately under appropriate item.
M&L for Laying of 3mm thick APP membrane of (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm side overlap and 150mm end overlap, sealing all overlaps and bonded to the surface by fusing and bonding torch on method complete all as specified and directed. Note: All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative.
Cleaning the dust,durt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformly and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed.
Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed.
M&L for 40mm thick brick tiles laid over and including 15 mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 5 % by weight of cement or as per manufacturer's instruction and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on roof area and proper curing with water by ponding complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4.0 Sqm each and removing from site complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutters from the frame) not exceeding 1.5 Sqm each and removing from site complete all as specified and directed.
S&F factory made solid PVC door frame of size 50 mm x 95 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.
S&F factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with partical board core (stile:) with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front Face & 2 mm Plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.
S&F steel ventilator with top hung shutter including hinges, steel peg stay etc complete all as specified and directed.
S&F in repair stainless steel butt hinge of size 100 mm long for fixing of PVC door shutter etc complete all as specified and directed
S&F 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.
S&F 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or extruded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed.
S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.
M&L for pre-cast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in drain or manhole cover slabs and similar work including taking down RCC cover slab complete all as specified and directed.
M&L plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole or drain copings and other similar works etc complete all as specified.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.
Demolition and breaking up existing sewer / drain pipes (SGSW,AC,RCC) of 100 mm to 200 mm bore of any type and in any position set in cement mortar and disposal of waste materials within 50 m all as specified and directed.
M & L for DWC pipe class- SN8 (double wall corrugated pipe of structured wall polyethelene piping systems) of 150 mm internal dia (with coupler and elastometric rubber sealing ring) with non smooth external annular corrugated and smooth internal surfaces (double wall) for non pressure underground sewerage and drainage application confirming to IS: 16098-2013 complete all as specified and directed.
Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.
S&F 4mm thick E-boards tiles false ceiling with powder coated GI snap grid frame work including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0/Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 25x25x1.6 mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x1.5 mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fasteners plugging in RCC slab placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4 mm thick E-boards tiles of size 595 mm x 595 mm of approved texture and finished complete with two coats of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.
S& F in repair 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws over & including anodised aluminium snap grid frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified all as specified
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F solid PVC wall Lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.
S& F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
S&F in repair 20 mm dia Stainless steel curtain rod of wall thickness not less than 1mm with both side decorative brakets and fixing brakets complete all as specified and specified.
S&F for 18 mm thick 100% Solid PVC laminated board of required size comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade), Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet Single extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity (Screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum Compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being termite / Borer Free, water / moisture proof and Fire Retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces for kitchen cabinet shutter complete all as specified and directed. Note : Material test certificate and authentication should be provided by the manufacturing company.
S&F of Stainless steel auto closing hinges operable at 0 degree for kitchen cabinet shutters complete all as per specified and directed. Make: Hettich Cat part No.9281432 or any other make as approved by GE.
S&F of stainless steel handles 138 mm size for kitchen cabinet shutters complete all as per specified and directed. Make: Hettich : Cat part No.9113468 or any other make as approved by GE
M & L for PCC 1:3:6 type C2 using 40 mm graded aggregate as in bed drain pipes of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete.
M & L for PCC 1:2:4 type B1 using 20 mm graded aggregate as in roof, lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
M&L for point wiring with FRLS PVC insulated unsheathed stranded copper conductor cable 1.5 Sqmm (nominal area) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade concealed conduit with all fixing accessories of 20mm dia, using new MS sunk terminal boxes of thickness not less 1.2mm, new 3mm thick laminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed conceal surfaces including taking down old existing point wiring complete all as specified and directed. Note:(a) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire (b) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surface.
One light/fan/bell point controlled by one switch
One point for socket outlet 5 amps on independent board but not below the switch board in same vertical plane.
One point for socket outlet 5 amp same board.
All as per srl item No. 161 above but for one 3 pin socket outlet 15 amps, independent, with cables 2.5 sqmm size on independent board 2.5 Sqmm earth wire complete all as specified and directed.
S&F ceiling rose surface type bakelite 65 X 50 mm three terminal complete all as specified and directed.
S&F switch piano, flush type 5 amps, single pole, one way 230 volt complete all as specified & directed.
S&F switch socket combination flush type suitable for 3/ 5 pin , 6 Amp, 230 volt complete all as specified & directed.
S&F switch piano, flush type 16 amps, single pole, one way 230 volt complete all as specified & directed.
S&F socket outlet suitable for 3/ 5 pin , 5 Amp, 230 volt complete all as specified & directed.
S&F socket out let 2-in-1, 3 pin, 5/6 & 15/16 amp flush type complete all as specified & directed.
S&F sheet metal enclosure for MCB's 240 volt 8 way single pole and neutral with 200 amps rated busbar, double door on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.
S&F MCB SPN 40/63 Amps 'B' series, breaking capacity 10 KA of rating & making connection complete including taking down complete all as directed.
S&F MCB single pole, 6 to 32 amps rating, 240 volts, 'B' series, 10 KA breaking capacity & making connection including taking down complete all as specified and directed.
S&F in replacement of sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket along with one MCB, douple pole of current rating 20 amps, C series 240 volts AC including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as specified & directed. Note :- (I) The cost for cutting, chases required shall be deemed to include in the quoted unit rate.
Taking down carefully sub main of any type complete with MCB DBs MCB, isolators wooden batten, surface conduit/casing conceal etc. removing materials including accessories for taking credit and making good disturbed surface to match the existing complete all as specified & directed.
M&L for concealed submain wiring using FRLSH PVC insulated, unsheathed stranded copper conductor cable two single core of size 6.0 Sqmm of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 20 mm dia with all fittings and accessories along with one run of PVC insulated unsheathed stranded copper conductor of size 6.0 Sqmm as earth continuity conductor for 8 way DB complete all as specified & directed. Note:- (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one length. (ii) The cost for cutting, chases required shall deemed to be included in the quoted unit rate.
M&L for concealed submain wiring using FRLSH PVC insulated, unsheathed stranded copper conductor cable two single core of size 4.0 Sqmm of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 20 mm dia with all fittings and accessories along with one run of PVC insulated unsheathed stranded copper conductor of size 4.0 Sqmm as earth continuity conductor complete all as specified & directed. Note:- (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one length. (ii) The cost for cutting, chases required shall deemed to be included in the quoted unit rate.
S & F in replacement of existing worn out LED with LED lighting fixture with co extruded polycarbonate body environmental friendly, energy efficient tube light complete with all accessories internally pre-wired and including LED lamp 20 watt 01 No and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.
S&F in replacement of existing worn out LED with 10 W mirror light fitting with high output with opal diffuser 230 V AC decorative type with driver holder and LED lamp including connecting with three core flexible copper conductor cable of suitable size complete all as specified.
S&F in replacement of existing worn out LED with 10 W bulk head fitting with high output with opal diffuser 230 V AC decorative type with driver holder and LED lamp including connecting with three core flexible copper conductor cable of suitable size complete all as specified.
S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver with suitable size of wire complete including connecting with three core flexible copper conductor cable of suitable size complete all as specified by Engr-in-charge
S&F Exhaust fan 300 mm sweep Metallic body Range complete and shutters including required length and size of copper stranded conductor for connection from ceiling rose to connector of fan with provn of making hole in wall complete with grouting of nuts, bolts and washers and all other accessories required for fixing of fan including testing complete all as specified and directed.
S&F ceiling fan with down rod, fan connector/ fan hook, 1200mm sweep, 240 V AC, Energy efficient, 5 star rating with 3 Blade and connecting up including provn of three core PVC insulated multi stranded flexible copper conductor cable of size 1.5 sqmm copper wire from ceiling rose to fan of length not less than 0.5 mtr. all as specified & directed.
S&F sheet metal enclosure for MCB's 240 volt 4 way single pole and neutral with 200 amps rated busbar, double door on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.
S&F vertical /horizontal water heater storage type, electrically operated of capacity 25 litres, BEE 5 star rated ABS/ steel body and inner tank made with stainless steel duly thermal insulated with 2 KW heating element complete with and including vent pipe , fusible plug, safety valve, earth connector, PVC connections(hot and cold) and electric connection all as specified and directed. Make:- Havells (Cat Part No GHWAMGTWH025 , Veenus (Cat Part No. AUDRA) , Bajaj (Cat part No. MAJ 25GL (New) as approved by GE.
M&L (in replacement) for 50 mm bore GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified & directed.
M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover reinforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete all as specified and directed.
M & L for earthing complete with galvanized steel earth plate electrode of 60 cm X 60 cm X 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized strip of size 32 mm X 6 mm as earth lead by means of bolts, nuts, checknuts and washers of galvanized iron or steel, galvanized iron pipe of 40 mm diameter connected to earthing test point, all as shown in electrical plate No. 5, connected to earthing test point including testing on completion, excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep with a 10 mm deep CI cover hinged to CI frame on ground level, GI watering pipe, funnel, etc. and connected to the earth point and testing complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sq mm 2.0 core including taking down complete all as specified & directed. Note:- Earth work, Sand & Bricks shall be paid separately under respective items
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sq mm 4.0 core including taking down complete all as specified & directed. Note:- Earth work, Sand & Bricks shall be paid separately under respective items
Excavation in trenches n.exceeding 1.50m wide and n.exc 1.50m depth for foundation etc or for shafts, walls, cess-pits, manholes, pier holes, cable etc n.exc. 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.
Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified & directed.
Returning, filling in including spreading, levelling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.
Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.
M & L for sand cushioning with Ganga Sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable complete all as specified & directed. Note:- Punned thickness shall be measured for payment.
M/S JAI DURGA CONSTRUCTION
DINESH ELECTRICALS
M/S CHANDRIKA PRASAD AND SONS
M/S VIVEK DUBEY
Technological Associates
ARADHYA ENTERPRISES
Hi-Tech Constructions
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .