regulation and patroling of sardar samand kharda bandi nehada giroliya dhairya hemawas and baniyawas dam canal system

Regulation & patrolling of Feeder/ Main / Branch/ Distributory and Minor canals of canal irrigation projects with their own conveyance system (Two Wheeler with POL) and mobile (with recharge pack) for communicating with site incharge or control room. including Jute rassi, Torch, Fawda etc. all T&P required for regulation. Canal Having Discharge capacity up to 100 cusec

Regulation & patrolling of Feeder/ Main / Branch/ Distributory and Minor canals of canal irrigation projects with their own conveyance system (Two Wheeler with POL) and mobile (with recharge pack) for communicating with site incharge or control room. including Jute rassi, Torch, Fawda etc. all T&P required for regulation. Canal Having Discharge capacity 100 cusec to 500 cusec

Supply of empty bags of 50 kg capacity in good condition (b) Plastic/polythene

Inspection Vehicles with driver such as car /jeep/Boleror equivalent model not older than 3 years (b) for offices having a district as their jurisdiction up to 2000 km per month including POL but excluding GST

Dismantling old plaster or skirting, racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 m lead, inclusive of de-watering wherever required.

Plaster in cement sand mortar 1:4 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials of thickness: 20mm

Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto; 20MM

Supplying of M.S. reinforcement including labour charges for bending binding and placing in position all reinforcement as per drawing including cost of binding wire and all leads and lifts using. Tor or ribbed bars. IS:1786

Design, drawing, fabrication, supply, erection, testing and commissioning of Embedded parts consisting of sill beams, vertical tracks, vertical seal tracks, sealing frame, guide tracks/rails, wall plates, seal seats, anchors, anchor girders, yoke girders, tie flats, trunnion supports, rope and pulley supports etc. and any required necessary item, with all accessories as per relevant IS code, for all type radial gates/ Vertical lift fix wheel type sluice and Canal gates/Stop log gates including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, tools and tackles, applying two coat of zinc rich epoxy primer to give dry film thickness of 70± 5 microns and finish coat (two coats) of solvent less coal tar epoxy paint using airless spray to provide dry film thickness of 150± 5 microns per coat thus total dry film thickness of all coats, including primer coating, should not be less than 350 microns., including packing & forwarding, transportation charges complete item, as per specifications and approved drawings.

Please Enable Macros to View BoQ information