Construction of Staff Quarter 1BHK Building

Amount

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Soling including Dumping of Stone Including Cost of stone

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form for: Foundation,Plinth Beam, footing bases of column : Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form for:Stairs (excluding landings) except spiral staircases.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc. upy floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3) 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo-Mechanically treated bars.)

Providing and laying stabilized mud block wall having two leaves interlocked with ties at 900mm Horizontally and 450 mm Vertically, leaving air cavity of 3" between two wall leaves.

WALL PLASTER - EXTERIOR CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

WALL PLASTER - INTERIOR CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

6mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

EXTERIOR FINISHING Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing and fixing plain lining tongued and grooved including wooden plugs and wooden particle board for complete with necessary screws and priming coat on unexposed surface Second class Teak Wood including skirting and corners complete 12 mm thick including skirting and corners complete job

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.1 M.S. tube - 1" Outer Dia @4kg/m Total Legth of Railing = 26 m Total Length Of ms pipe = a) Horizontal segment = 26 x 3 rows = 78m b)Vertical Segment (@1.5m interval) = 52 x 0.81= 42 Total kg= (78+42)*2= 240

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete. 50mm thick with 20 mm nominal size stone aggregate.

VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.2 Size of tile 600x600 mm

WOODEN FLOORING Wooden planking, tongued and grooved in flooring including fixing with iron screws complete including skirting and wastage 11.43.1 12 mm thick Second class teak wood

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class kail wood

Providing and Fixing UPVC Window with casement /casement cum fixed glazed with DGU ( Double Glazed Unit) All Complete job.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.

Applying priming coat: 13.58.1 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 250 mm

Providing and Fixing Brass Kitchen Sink Mixer with Sewel Spout of approved quality & make as approved by Engineer in charge.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing white viterous china pedestal type water closet (European type) with with seat and lid, 10 litre low level CP flush with fittings CI/MS bracket 40mm bend diameter flush bend overflow arrangement with mosquito type coupling complete incl. painting of fittings and brackets, cutting and making good the wall and floors wherever req. WC pan with ISI marked white solid plastic seat and lid. with white viterous china flushing cistern & CP flush bend.

Providing and fixing of CP finish Health Faucet with regulator ( angle valve) of approved quality with CP braided flexible pipe 1 m long, wall hooked complete as per manufacturer recommendation.

Providing and fixing Heavy class SS grating with Cockroach proof SS strainer of approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for waster and FT.

Providing and fixing C.P. brass angle valve with wall flange of approved quality conforming to IS: 8931complete as per approved specifications

Providing and fixing of C.P Toilet paper roll holder with all accessories as required and making good the walls wherever required.

Providing and fixing C.P. brass Two way bib tap with wall flange of approved quality conforming to IS:8931 with all accessories as per approved specifications and making good the walls wherever required

Providing and fixing C.P. brass bib tap with wall flange of approved quality conforming to IS:8931 with all accessories as per approved specifications and making good the walls wherever required

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing & Fixing Towel rail C.P. brass 750 x20 mm together with a pair of C.P. brass brackets to fit the size of towel rail

Providing and fixing CP Brass Single lever wall mixer with Bend Pipe of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing & Fixing Brass Shower Arm 12 " long & 6" Diameter Brass Rain Shower of approved quality & make as approved by Engineer in charge.

uPVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe 110 mm dia

110 mm UPVC bend 450

110x110x110x110 mm UPVC double equal door Tee

UPVC bend 87.5° 110 mm bend

UPVC coupler for UPVC drainage pipes 110 mm

uPVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe metre 75 mm dia

UPVC bend 87.5° 75 mm bend

Providing/Fixing of 1000 Lts X2 Capacity Pvc Water Tanks (Triple Layer) of Isi Mark/Iso 9001 (sintex 1000 litre )

Providing and fixing double equal junction of req. degree access door with fiting complete job. PVC.: 100mm dia

Providing and fixing double equal junction of req. degree access door with fiting complete job. PVC.: 75mm dia

Providing and fixing PVC collar of req dia complete job: 100mm dia

Providing and fixing PVC collar of req dia complete job 75mm dia

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. External work including trenching, refilling etc .PN-16 pipe, 40mm OD (SDR-7.4)

PN-16 pipe , 32mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineerin charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4)

Providing and fixing PPR Unions : PPR Union 40MM

PPR Union 32MM

PPR Union 25MM

Providing & Fixing PPR Socket 25 MM Socket

Providing & Fixing PPR Socket 32 MM Socket

Providing & Fixing PPR Socket 40 MM Socket

Providing & Fixing PPR Socket 50 MM Socket

Providing & Fixing PPR Socket 32X25 MM SOCKET

Providing and Fixing PPR Elbow Elbow 25MM

Providing and Fixing PPR Elbow PPR Elbow 32 MM

Providing and Fixing PPR Elbow PPR Elbow 40 MM

Providing and Fixing PPR Elbow PPR Elbow 50 MM

Providing and Fixing PPR Elbow 25X1/2 MM F/T / Elbow

Providing and fixing PPR Tee Tee 25 MM

Providing and fixing PPR Tee Tee 50 MM

Providing and fixing PPR Tee 25X1/2 MM F/T / Tee

Providing and fixing PPR Tee 32X25 MM R TEE

Providing and fixing PPR Tee 40X25 MM R Tee

Providing and fixing PPR Tee 50X40 MM R Tee

Providing and fixing PPR Tee 50X32 MM R Tee

Providing and fixing Ball Valve PPR 25 mm ball Valve

PPR 32 MM Ball Valve

PPR 40 MM Ball Valve

PPR 50 MM Ball Valve

1/2 Inch Plug

25 MM End Cap

Provideing & Fixing Cross over

25 MM Crossover

32 MM Crossover

Providing and Fixing Adapter 25X1/2 MM M /T/ ADAPTER

Providing and Fixing Adapter 25X1/2 MM F /T/ ADAPTER

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.. Group B

Wiring for light/power plug with 2X4 sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No 4sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Wiring for circuit /submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3pin 5/6 amps & 15/16 amps modular switch connection etc as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6pin 5/6 amps & 15/16 amps modular switch connection etc as required

Supply, installation and testing and commissioning of the following light fixtures including all accessories like electronic ballasts, bulbs, lamp etc complete as required as 1X18 watt surface mounted mirror LED fixtures as required including 18 watt lamp

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Triple Pole & Neutral

Conduit 25 mm

25 mm Bend

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 Way Double door

Providing and fixing Wooden Shingstak All Job Complete.(All Floors included)

Carriage of materails By Mech.Transport, from source to site of work cement and steel To site for an avg lead of 10 km

Carriage of materails By Mech.Transport, from source to site of work sand, aggregates and stones etc To site for an avg lead of 10 km

M/S SONAM ANGCHOK

M/S tsering samphel