REPAIR TO ROOFING FLOORING JOINING CEILING ETC OF OTM ACCN AT JAK LI RC UNDER GE 970

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation etc), or insulation boards/slabs/blankets, any thickness any type including cover fillets, complete all as specified and directed by engineer in charge.

Providing & Fixing in position suspended false celling system using E Grid suspended celling Grid system. The size of Grid shall be 600X600mm with GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 4mm thick High Pressure Stream cured non primered classic/designer variant E-Board ISI Marked, IS No 14862-2000. Fibre cement E Board to be placed in the gird of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the pulins of the roof complete all as specified and directed by engineer in charge.

Preparation of new surfaces and applying two coats of oil bound distemper over well prepared ceiling boards complete all as specified and directed by engineer in charge.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by engineer in charge.

M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by engineer in charge.

All as per item No 05 out except sheeting (any thickness) complete all as specified and directed by engineer in charge.

M&L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick in ridges of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed by engineer in charge.

All as per item No 07 but except sheeting (any thickness) complete all as specified and directed by engineer in charge.

0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' or 'J' type or crancked hook bolts and washers in roofs, walls etc in patches complete all as specified and directed by engineer in charge.

All as per item No 09 but except sheeting (any thickness) complete all as specified and directed by engineer in charge.

M&L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by engineer in charge.

Dismantling brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed by engineer in charge.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed by engineer in charge.

All as per item No 13 above but except bricks complete all as specified and directed by engineer in charge.

Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by engineer in charge.

M&L Rendring 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by engineer in charge.

M&L Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by engineer in charge.

M&L rendering 10mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement including taking down existing complete all as specified and directed by engineer in charge.

M&L Preparation of old plastered or painted surfaces of wall by complete removing of existing treatment (scrubbing, washing down etc) complete all as specified and directed by engineer in charge.

M&L for applying one coat of wall putty 2mm thick over & above complete treated surface as item No. 21 complete all as specified and directed.( Make : JK Wall putty.) complete all as specified and directed by engineer in charge.

M&L for preparing new plastered surfaces and applying two coat of exterior emulsion paint over a coat of primer complete all as specified and directed by engineer in charge.

Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by engineer in charge.

M&L for prepration of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by engineer in charge.

Prepration of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed by engineer in charge.

M&L for preparing old plastered surfaces and applying two coat of exterior emulsion paint complete all as specified and directed by engineer in charge.

Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed by engineer in charge.

Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed by engineer in charge.

Taking down Shutters of any description exc 1.0 sqm and n.exc 2 sqm each complete all as specified and directed by engineer in charge.

Taking down Shutters of any description exc 1.0 sqm and n.exc 2 sqm each and refixing the same after required cutting , planing and painting complete all as specified and directed by engineer in charge.

S&F Mild steel framed works such as grills, framed guard bars, etc and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by engineer in charge.

M&L for Two coats of synthetic enamel paint including preparation old steel surfaces over 10 cm in width or girth complete all as specified and directed by engineer in charge.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed by engineer in charge.

S&F factory made solid Panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top and bottom rail; panelling of plain colour PVC sheet 5mm thick to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement,complete all as specified and directed by engineer in charge.

Ditto all as per item no 33 but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed by engineer in charge.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelaminated PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification & drawing complete all as specified and directed by engineer in charge.

S&F Butt hinges medium weight cold rolled mild steel 100mm size complete all as specified and directed by engineer in charge.

S&F chokhats made of angle , flat iron iron structural steel fe 410-0 gde 250 of any descroiption and size including nessasary fixing lugs , hinges etc including one shop coat of primer complete all as specified and directed by engr in charge.

S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 105x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and directed by engineer in charge.

.-Ditto-all as per item No 38 above but size of frame 125x60mm complete.

M&L PCC 1:3:6 type C-O using 12.5 mm graded crushed stone aggregate as in back filling, coping etc complete all as specified and directed by engineer in charge.

S&F 40 mm thick flush shutter solid core construction with block bord core and plywood face panels commercial type both side complete all as specified and directed by engineer in charge.

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as specified and directed by engineer in charge.

S&F in repair 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed by engineer in charge.

S&F in repair 2nd class hard wood 25 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.20 (a) complete all as specified and directed by engineer in charge.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, with glazing bars complete all as specified

S&F 16/18 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination incl teack wood liping 6mm thick on sides complete all as specified and directed by engineer in charge.

S&F 30mm width of flaps (when open) continuous (Piano) hinges mild steel bright finish or electro galvanised complete all as specified.

Ball catches with 8mm dia steel ball and brass body with striking plate including letting in and fixed complete all as specified.

S&F 40 mm dia cupboard knobs fixed with nut and washer brass polished bright finished complete all as specified

S&F hasp and staple aluminium anodised, safety type including bolt to hinge plate and fixed with screw of 125mm size complete all as specified

S&F extruded aluminium alloy handles,febricated type,anodised of 75mm size complete all as specified

S&F Aluminium handles, cast type, anodized 100 mm size comp ISI Marked complete all as specified

S&F 100mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 250mm long complete all as specified and directed by engineer in charge.

S&F Mild Steel 300mm, ordinary rat tail rod pattern springs,incl roller and roller plate complete all as specified and directed by engineer in charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by engineer in charge.

S&F in repairs 3mm thick sheet glass, ordinary quality glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed by engineer in charge.

S&F Galvanized mild steel wire cloth, 0.46 mm noimnal dia or wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staple complete all as specified and directed by engineer in charge.

S&F Galvanized mild steel wire cloth, 0.46 mm noimnal dia or wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staple fixed in repair complete all as specified and directed by engineer in charge.

Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by engineer in charge.

S&F in repair Aluminium handles, cast type, anodized 100 mm size comp ISI Marked complete all as specified

S&F in repair 100mm long aluminum anodised barrel tower bolts of extruded section as complete all as specified

Supply and fix in repair 25mm dia stainless steel curtain rods including fixing arramgements complete all as specified.

Supply and fix in repair 25mm dia stainless steel brackets including fixing arramgements complete all as specified.

Supply and fix in repair 25mm dia stainless steel finale cap complete all as specified.

S&F in repair aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 250mm long complete all as specified and directed by engineer in charge.

S&F in repair Mild Steel 300mm, ordinary rat tail rod pattern springs,incl roller and roller plate complete all as specified and directed by engineer in charge.

Supply and fix powder coated (min thickness of powder coating should be 50 micron) anodised aluminium frame for doors, ventilators and windows with one or more rebates including jointing cleat for fixing etc complete all as speicified and directed.

Supply and fix powder coated anodised aluminium sliding type windows, ventilator shutters, side hung type with sash bars, aluminum section weighing 0.55 Kg/M including necessary jointing cleats, glazig clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminium fittings such as per stays 150mm long (01 No), hinges type B-21 100mm long (02 Nos), suitable handle (01 No) complete all as specified and directed.

Supply & fix anodised aluminium grill having weight n.exc 3.5 kg/sqm with all fittings and fixtures shape and size complete all as specified and directed by Engr-in-charge.

Supply and fix powder coated anodised aluminium door shutters, aluminum section weighing 0.55 Kg/M including necessary jointing cleats, glazig clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminium fittings such as per stays 150mm long (01 No), hinges type B-21 100mm long (02 Nos), suitable handle (01 No) complete all as specified and directed.

Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Material & labour for 9mm thick prelaminated particle board exterior grade, solid core, prelaminated both sides with decorative choice laminations fixed in aluminium frame work complete all as specified and directed.

Taking down and refixing aluminium door/window shutters after repairing/easing/readjusting the same with proper installment of glass, rails and styles by necessary cutting, grinding of members etc and refix hinges, handles screws etc complete all as specified

Supply & fix double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified.

Supply & fix Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level.

Material and labour for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in surface channels and drains complete all as specified and directed by engineer in charge.

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed by engineer in charge.

Material and labour for 50 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified and directed by engineer in charge.

Material and labour for 40 mm thick PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggte) as in floors finished even and smooth without using extra cement complete all as specified and directed by engineer in charge.

Material and labour for 25 mm thick PCC 1:2:4, type B-0 using 12.50 mm graded crushed stone aggregates as in sub floor surfaces, complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding/backing etc, removing serviceable tiles to store and rubbish off the premises.

Material and labour for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed by engineer in charge.

M&L for coloured non skid ceramic tiles 7 to8 mm thick, edgeless , area of each tile exc 0.06 sqm but n. exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match Shade, pattern, laying etc of tiles as complete all as specified and directed by engineer in charge.

M&L for coloured non skid ceramic tiles 7 to8 mm thick, edgeless , area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match Shade, pattern, laying etc of tiles complete all as specified and directed by engineer in charge.

M&L for viterified tiles light shade 10 mm thick (square/rectangular) polished , area of each tile n. exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and Shade, Colour shall be decided by Engr in Charge complete all as specified.

M&L for Rendering 10mm thick in CM 1:3 on stone masonary surfaces, other than fair faces of brick work finished even and fair to receive tiles.

M&L for Glazed ceramic white tiles 300x200x7mm thick on vertical surfaces such as skirting, dados and rises to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match pattern and shade complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as skirting, dados and rises to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match pattern and shade complete all asspecified and directed.

S&F stainless steel grating doom 100/75mm dia with or without hole as directed .(Min.weight 25gms).

M&L 75 mm thick plain cement concrete 1:3:6 type C2, using (40mm graded stone aggregate) as in sub base of floors over and incl earth filling complete all as specified and directed by engineer in charge.

M&L factory made Precast machine crafted cement concrete M-20 grade,antiskid tiles of size 300x300x22 to 25 mm polymer moulded using white cement and pigments as per design/pattern approved including 20mm thick screed bed in CM 1:6 complete all as specified and directed by engineer in charge.

Supply & fix in repairs bib taps, cast copper alloy, chromium plated with crutch or butterfly handles, screwed down for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

Supply & fix in repairs central hole wash hand basin mixture with central spout complete all as specified.

Supply & fix in repairs pillar taps cast copper alloy with capstan heads, chromium plated, fancy type 15mm bore screwed down high pressure with lettered Hot and Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 360mm wide x 390mm high and 415 to 445mm long flexible pipe complete all as specified and directed.

Supply & fix in repairs coloured Plastic seat cover closed pattern with flat bottom and cover with MS CP or aluminized hinging device complete all as specified.

Supply & fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including trap set in and including concrete with connection to trap/ anti syphonage pipe and making good the surface complete all as specified.

Supply & fix in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed.

Supply & fix in repairs vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets Including 32mm bore waste pipe, brass coupling, ,chromium plated brackets, restoring all connections complete all as specified.

Supply and fix in repairs, urinal, bowl type or half stall pattern, white including connection to flushing pipe and outgoing pipe complete all as specified and directed.

Supply and fix in repairs 15mm brass CP health faucet with 1 metre flexible tube and hook complete all as specified. Make:- L&K, Jquar

Supply and fix in repairs toilet paper holder chromium plated fixed to wall complete all as specified. Make:- L&K, Jquar

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc. of capacity exc 250 ltr and n. exc. 500 ltr with and including disconnecting the tank and refixing in position with necessary assesories such as long screws,check nuts, unions, elbows etc required to make it functional to the entire satisfaction of Engineer-in -charge.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc. of capacity exc 500 ltr and n. exc. 1000 ltr with and including disconnecting the tank and refixing in position with necessary assesories such as long screws,check nuts, unions, elbows etc required to make it functional to the entire satisfaction of Engineer-in -charge.

Supply & fix in repairs ball valve brass high pressure with polythene float and fly nut complete screwed for 20mm bore dia of iron pipe or brass ferrule complete all as specified

Supply & fix in repairs ball valve brass high pressure with polythene float and fly nut complete screwed for 15mm bore dia of iron pipe or brass ferrule complete all as specified

S&F in repair rotational moulded polythene water storage tank 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete, all as specified and directed by Engr -in-Charge.

S&F in repair rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete, all as specified and directed by Engr -in-Charge.

S&F in repair PTMT Jet spray with 1 metre tube for EWC complete, all as specified and directed

Supply & fix in repairs stop valve fancy type chromium plated (concealed) type with long shank & cup 15mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed.

Supply & fix stop valve/angle valve 15mm bore, long shank, cast copper alloy, screwed down high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and direct.

Material & labour for cast iron floor trap outlet diameter 75mm, plain with grating including jointing with solvent & cement concrete 1:2:4 fixed in repairs complete all as specified and directed.

S&F Plate Rack stainless steel of size 600 x900 mm fixed with washer and plugs complete all as specified.

Material & labour for cement concrete 1:2:4 type C-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Material & labour for granite (of any type) work, 18 to 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good including 10mm thick in cement mortar (1:4) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position framed work complete all as directed by engr in charge

S&F Structural steel works as in roof trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats plate etc complete all as specified and directed by engineer in charge.

Washed stone chip plaster on exterior walls in two layer under layer 12 mm cement plaster /(1:4) furrowing the under layer wiyh scratching tools applying cement slurry on the under layer @ 3 kg of cement per square meter top layer 15 mm cement plaster 1:1/2:2 (1 cemernt:1/2 coarse sand/2 stone chipping) in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chipping (payment for poviding grooves shall be made seperateely) complete all as specified and directed by engineer in charge.

Forming grooves of uniform size 15 mm wide and 15 mm deep in top layer of grit wash as per approved pattern using wooden battens nailed to the under layer including removal of wooden battens repair to the edges of panels and finishing the groove complete as per specification and direction of engr in charge

Machine cut kota stone 18 to 20 mm thick in flooring laid over 20 mm thick screed bed or bedding layer of morter and jointed in grey cement slurry mixed with pigment to match the slab including rubbing and polishing complete all as specified and directed by engineer in charge.

All as per item no 125 but in vertical surfaces complete all as specified and directed by engineer in charge.

M/S B A Traders