Construction of store shed for proper up-keeping of waste oil etc. for E and M Division at Central Store of Sewa-II PS, Mashka, J and K (CW-422)

Amount

Earth work in excavation by manual means over areas ( Exceeding 30 cm and upto 1.5 mtr in depth ,1.5mtr in width as well as 10 sqm. On plan) including disposal of excavated earth up to 1.0mtr for cutting edge, disposed earth to be levelled and neatly dressed. All kind of Soil

Providing and laying in position cement concrete specified grade excluding the cost of centering and shuttering All work upto plinth level.1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (A) Crushed

Random rubble masonry with hard stone from nallah in foundation and plinth including leveling up with cement concrete 1:6:12 ( 1 cement:6 coarse sand: 12 graded stone aggregate 20mm nominal size)at plinth level with cement mortar 1:6 ( 1 cement: 6 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto plinth level.1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) (A) Crushed

Structural seel work welded in built up sections, trusses and framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing 1mm thick M.S. steel door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angle 40x40x6mm for diagonal braces

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.

Cement concrete flooring 1:2:4 ( 1 cement:2 coarse sand:4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50mm thick with 20mm nominal size stone aggregate. (a) Crushed

Providing corrugated G.S.sheet roofing fixed with polymer coated J or L hooks, bolts and nuts 8mm diametre with bitumen and G.I.limpet washers or with G.I. Limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizental/vertical or corved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.80mm thick with zinc coating not less than 275 gm/sqm.

Providing ridges or hips of width 60cm overall width G.S. Sheet fixed with polymer coated L or L hooks, bolts and nuts and 8mm dia GI limpet and bitumen washer complete.12.6.1 0.80mm thick with zinc coating not less than 275 gm/m2

Vijay Kumar

raj kumar