Extension of W/C of O/L RD 33802-L Kheri Disty (Pipeline)

Amount

Works Details

Providing, lowering, laying cutting (cut surface to be uniformly finished), joining with rubber rings marked with IS 5382 and testing SPIGOT AND SOCKETTED RCC NP2 MARKED WITH IS: 458-1988 and specials in to unloading, stacking, handing, rehandling etc. complete in all respects to the satisfaction to the Engineer in Charge. As per HSR item no. 28.60 for 600 mm dia

Excavation for pipeline running under pressure in trenches and pits; in open area, where disposal of surplus earth is done alongwith the alignment including triming and dressing sides, leveling of beds of trenches of correct grade, joint holes, cutting trees and bushes, etc refilling consolidation and watering of refill in, in 15 cm layers and restoration of unmetalled or unpaved surface to its original condition, including the cost of dewatering of rain water, diversion of traffic, nigth signal, fixing caution board, watching, fencing etc. and outside the town in ordinary soil for 450mm dia RCC NP2 pipe. As per HSR item no. 6.8 a

First class brick work laid in cement sand mortar 1:5 in foundation and plinth side lining, Nakka & Culvert complete in all respect as per approved drawing & PWD specification and as per HSR item no. 11.3

Cement concrete 1:4:8 with brick ballast 40mm nominal size in foundation and plinth HSR item no. 10.36 (for nakka culvert etc.)

Cement plaster 10mm thick cement mortar in 1:4 fillet gola plastering of nakkas and culvert etc. complete in all respect as per approved drawing and PWD specification as per HSR item no. 15.5

Supply of RCC Panels size 30"x30" at site of work, as per approved drawing design and specification (N.S. item) (as per CADA)

Fixing of RCC panels size 30"x30" at site of work, as per approved drawing design and specification (N.S. item) ( as per CADA)

Supply of RCC Lids size 24" dia at site of work as per approved drawing design and specification (N.S. item) (as per CADA)

Providing fixing 24" CI Nakka complete in all respect as per current market rate as per CADA pattern and rate approved vide CE/CADA memo no. 2565/30W dt 03.05.2016

Providing and fixing STEEL BAR EMBEDDED PLASTIC STEPS OF SIZE 263mm x 165mm of orange colour, confirming to specifications, in pump chambers, manholes etc., having minimum 3mm thick polypropylene polymer confirming to IS: 10910 encapulated on 12mm dia ribbed steel bars per IS: 1786. the rate include cost of setting the same to correct lines and levels dully embedded in 1:2:4 cement concrete including carriage, loading, unloading, stacking, handling, rehandling etc complete in all respects to the satisfactions of EIC, HSR item no. 29.28

UTTAM KUMAR Contractor

Naresh Kumar Contractor