8744/E8 AS and AS SPECIAL REPAIRS TO RESIDENTIAL AREA MAIN GATE ALONG WITH PROVISION OF MAIN GATE IN TYPE-2 COLONY AT NAD SUNABEDA, ODISHA

Amount

SCHEDULE 'A' PART-I (B/R PORTION)

Demolition of brick/stone masonry built in cement/lime mortar of any mix and stacking serviceable stones aside for reuse & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge.

Dismantling of structural steel work as in door, gate etc, but excluding framed truss etc. complete all as directed.

Excavation in trenches not exc 1.5m wide and n. exc 1.5m deep for foundations, laying of cables, pipe etc n.exc 10 Sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in hard / dense /soft/loose soil, complete all as specified.

Removing excavated materials exc. 250m but not exc. 500 m and depositing where directed at a level not exceeding 1.5m above the starting point in soils, complete all as specified.

M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete. complete, all as specified & directed.

M&L for mild steel TMT bars 10mm dia & over cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia, complete, all as specified and directed.

All as per serial item No. 1.07 here-in-above but 6mm to 8mm dia.

M&L formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for rough finished flat surfaces of concrete complete all as specified and directed.

M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of concrete complete, all as specified & directed.

M&L reinforced cement concrete (nominal mix) (1:1½:3) type A1 using 20mm graded granite stone aggregate in foundations including rafts, footings, foundation beams, bases for columns, mass concrete and the like, complete, all as specified and directed by Engineer-in-charge. Note :- Reinforcement and formwork shall be measured and paid for separately.

M&L reinforced cement concrete (nominal mix) (1:1½:3) type A1 using 20mm graded granite stone aggregate in columns, pillars, piers, posts, struts and the like complete, all as specified and directed by Engineer-in-charge. Note :- Reinforcement and formwork shall be measured and paid for separately.

S&F mild steel plain black sheet 1.00mm thick in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified & as directed. make : M/S JSW Steel Ltd or equivalent MES approved make.

S&F Framed work as in doors or gates of angle or other section conforming to Fe 410-W [grade E-250 quality A], with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors to be prepared for hanging or sliding with and including either hooks and hinges or steel handling door fittings (exclusive steel sheeting or other covering, running rails and guides) and hanging, fasting and fixing complete complete all as specified and directed.

All as per serial item No. 1.14 here-in-above but ornamental design and intricate design complete all as specified and directed.

M&L rendering 10mm thick in cement mortar (1:4) on fair faces of brick masonry or concrete surfaces of walls, finished fair & smooth complete all as specified and directed.

M & L for Preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (Ist quality) over a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge.

M&L for 18 to 20mm thick Granite (of any type), machine cut, slab of approved shade as in gate pillar dao etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) complete, all as specified & directed.

M&L for decorative stainless steel work such as letters (box type) of any size and shape, securing with and including cutting, fabrication, welding and fixing of approved design with ornamental works and similar works conforming to Grade 304 SG complete, all as specified & directed by Engineer-in-Charge.

SCHEDULE 'A' PART-II (E/M PORTION)

S&F Contemporary design with new generation technology in LED to invigorate your outdoor areas with functionality during night and aesthetics during the day, IP65 die cast aluminium Post top lantern fixed in suitable size pipe, designed with long lifeled engine & electronic driver, well designed aluminium shell intended to control the upward component of light and provides glare free downward symmetrical light distribution 70 W LED Garden Light White of Cat No. SUPREMEPT70WLED757PSYMTOPC of make Havells or Equivalent from Philips/CG/Surya with and including FRLS PVC insulated unsheathed multi stranded, copper conductor two core cable of size 1sqmm, 1100 volt grade, drawn through and including 19/20mm regid conduit (medium grade) as per IS-9537, complete all as specified and directed.

Taking down post top lantern light fitting including disconnecting from electric copnnection complete all as specified and as directed by Engineer-in-Charge.

Supply and laying of XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable 10Sqmm x 2core, heavy duty, with aluminium conductor, 1100 Volt grade, laid in treanchs/ ducts/ along wall / under road etc., including taking down or out existing unserviceable cable, complete all as directed. Make: FINOLEX / KALINGA / HAVELS / ECKO / POLYCAB / NICCO

Excavation in trenches not exc 1.5m wide and n. exc 1.5m deep for foundations, laying of cables, pipe etc n.exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Supply and laying precast concrete [M20 grade] cable covers of class LV type 1, of size 250mm x 150mm x 40mm for cable protection laid across alignment of cable in trenches, complete all as specified.

M&L for Natural river sand as cushioning of cable, including spreading and punning down all as per clause No. 3.21 of SSR Part-I complete all as specified. Note - Punned thickness shall be measured for payment purpose.

Cutting existing road and laying of GI pipe and filling with PCC (1:2:4) type B2 using 40mm garded aggregate as in surface etc complete all as specified and directed.

S&F Cable loop boxe made with PVC material, shock & dust proof of size 250 X200 X 105mm with and including 150Amp TPN busbar fixed on insulators, 01 No 63Amp MCB Single Pole, earth termination and including 02 sets of 25x6mm flat iron clamps with nuts, bolts and washers including two coats of aluminium paint over a coat of primer for flat iron, including taking down old terminal boxes, complete all as specified. Make: SINTEX / SUDHAKAR / HAVELLS

M/S SANTOSH SATAPATHY

M/s Jai Sree Hari