Repair and upgradation of WETP at Neejay Deep OCM under Neeljay Sub Area.

Demolishing cement concrete manually/ by |mechanical means including disposal of materia |within 50 metres lead as per direction of Engineer in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

|Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides ana ramming of bottoms, lift upta 1.5 m. including getting out the excavated soil and disposal o |surplus excavated soil as directed, within a lead of [50 m.AlIl kinds of soil

1:4:8 (1 Cement : 4 coarse sand (zone-ll) derived from natura sources : 8 graded stone aggregate 40 |mm nominal size derived from natural sources)

Brick work with non modular fly ash lime bricks (FALG Bricks) conforming to IS: 12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level lin :Cement mortar 1:4 (1 cement : 4 Coarse sand)

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)

Colour washing such as green, blue or buff to give an even shade New work (two or more coats) with a base coat of whiting

Providing and laying in position cement concrete of specified grade excluding the cost of centering and |shuttering -All work up to plinth level :-1:3:6 (1 Cement :3 coarse sand:6 graded stone aggregate 40mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Hot rolled deformed bars

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of |centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm Inominal size)

Centering and shuttering including trutting propping etc. and removal of form for: Walls (any thickness including attached pilasters, butleresses, Ipinth and string courses etc

Carriage of Earth by mechanica| ransport ncluding loading. unloading and stacking upto lead of 2.00 km. As per instruction of Engr.ln-charge

Assistance in cleaning of sludge deposited along and in the ETP tanks and channel by mechanical means all complete as per the instruction of EIC

painting with synthetic enamel paint of aproved brand and manufacture of required colour to give an even shade :One or more coats on old work

Distempering with 1st quality acrylic distemper having VOC (Volatile Organic Compound ) content lesS than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Old work (one or more coats)

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 lt/10 sqm)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Providing and fixing 10HP Sewage Mud Pump of make Crompton or similar with 4 inch delivery outlet and Cast Iron body. With Head Range of 10-29M, Discharge rate 1600-300LPM, Solid Handling Capacity of 30mm. All inclusive of cost for transportation, installation, testing and necessary electrical connections. All complete as per the instruction of Engg. Incharge.

Providing and fixing of Flocculator System mechanism for promoting efficient floc formation in water/wastewater treatment.Designed for installation in an RCC tank of approximately 5.75 x 5.75 (4.5 m effective diameter).Suitable for a 3.5m Side Water Depth (SWD) plus 0.3-0.5 m Free Board (FB).Robust Central Drive featuring a heavy-duty Worm Reduction Gear System.Driven by a 2.2 kW / 1440 rpm induction motor.Motor power transmitted via a high-torque chain and sprockets arrangement.Constructed from highly corrosion-resistant Stainless Steel.Paddle assembly designed to cover adequate cross-sectional area for optimal shear gradient (G-value). Includes a robust support frame, safety-focused hand railing, and chequered plate walkway.Provides the low-speed, high-torque necessary for effective, tapered flocculation. All inclusive of cost for transportation, installation, testing and necessary electrical connections. All complete as per the instruction of Engg.Incharge.

Providing and Fixing Tube Type Oil Skimmer( Frame Type ) Capacity : 0 TO 80 LPH(Depending upon thickness of free floatingOil and viscosity of oil/grease in effluent.)Skimmer Frame : SS316 Tube : Special Oleophilic Elastomer (Size: 25mm Dia. Endless length: 7meters,thickness: 3mm) Wiper: Teflon (PTFE) Mounting: Frame mounted on ground Electrical Specifications: Electric Motor : 0.5 HP, 3PH.,415V(+/-10%), 50 HZ (+/-5%), 1440, IE-2, 1440 RPM., FlangeMounted,With suitable worm reduction gear box, Accessories: PVC hose and DOL Starter. All inclusive of cost for transportation, installation, testing and necessary electrical connections. All complete as per the instruction of Engg. Incharge.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Total impact of GST for the purpose of CTC

INR Forty Six Lakh Forty Six Thousand Two Hundred & Thirty and Paise Thirty One Only