Construction of 33 KV Line

Loading, Carriage and unloading of S.T. Pole from store to site of work as and when required or back to store from site including old & used pole.

Erection of Single S.T. Pole including all fittings.

Erection of double pole structure as per standard specifications.

Painting of Steel Tubular Poles after rubbing, cleaning with emery paper and coating one coat of redoxide on full length of pole and then two coat of Aluminium paint upto X-arm from top including cost of paint and redoxide paint used should be ISI mark Ist class enamel paint.

Making plinth of single pole of 400 mm dia, 600 mm height (200mm underground) with C.C. in ratio 1:4:8 of cements, stone ballast and coarse sand including cost of cement, stone & sand etc.

Grouting of pole with cement brick ballast and coarse sand as per standard specifications.

Fixing and grouting of stay rod including digging of pit, binding of stay wire and its all related work including cost of cement.

Earthing of support by sagging of M.S. earthing rod 20mm and connecting with earth wire and related work.

Fabrication/modifications of M.S. Items as per requirement of site conditions.

Laying, stringing, tensioning and binding of ACSR Dog conductor for H.T. O.H. line.

Loading, Carriage and unloading of ACSR Panther/Dog conductor from store to work site or vice versa

Opening of H.T. O/H or U/G line jumpers for erection work.

Making of 33 H.T. O/H or U/G line jumpers for erection work.

Laying and stringing of G.I. wire for guarding and cross-lacing

Fixing of danger board on erected poles

Making of H.T. section point for 33 Single Circuit Line

Erection of following material on erected pole.

33 KV /11 KV V-type cross arm

MS Channel (100x50x6 )mm 2.4 / 2.8 mtr. long

Guarding Angle (65x65x6)mm 2.2/1.8 mtr. long

E/F bracket

Taking out 33 KV 3x300 XLPE Cable from cable drum and then after transportation from store to work site or vice-versa.

Digging of Trench for laying of cable in different situations in size of 30 cm. wide and 1 to 1.5 meter deep.

In Normal soil

In Kharanja Road

In Metallic Road

Laying of cable in above digged trench and also upto pole as per standard specification alongwith cost of brick.

Laying of 33KV 3x300mm2 XLPE cable by H.D.D. method

Mounting of 33/11 kV Pin Insulators

Making of suitable pit for laying of cable by H.D.D. method

Making indoor/outdoor joints of 33 kV 3x300 sqmm. Cable where the cable is being laid. Jointing Kit will be provided by the Department.

Mounting of cable box on pole with handling of concerning cable and proper fixing

With G.I. pipe/Old & Used People of 3 metre

Without pipe

Erection of cross bacing of M.S. Angle 65x65x6 on erected double pole/four pole.

Chopping of tree branches lying in the route of existing line touching the tree branches to the phase line conductor making fault to the feeder, for 3” to 18” dia or as per requirement of site.

Repairing of 33 kV Isolator at 33/11 kV yard

Strengthening of existing damaged poles by welding and related works

Carriage of all concerning stock material except mentioned in items from Kesco. Store to site or vice-versa.

Connecting of newly erected network with kesco mains including testing, commissioning and energization of the same completely.

Khan Traders and Electrical Works

VK Fabricators and Erectors