PROVN OF CHAIN LINK FENCING, STORE WITH TOILET AND SPECIAL REPAIR OF CERTAIN MISC B/R AND E/M WORKS OF AGE B/R AND AGE E/M UNDER GE TENGA

Amount

Excavation in post holes each n exc 0.5 cum and getting out in hard/dense soil, returning, filling in and ramming earth in layers n exc 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface all specified and directed.

M&L PCC (1:3:6) type C-2 (using 40mm graded aggregate) as in foundation filling and mass concrete etc all as specified & directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc conforming to Fe-290 Gde E-165 all specified and directed.

S&F MS Screw bolts 12 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, embeded in RCC post, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10 cm but n. exc 15 cm long all specified and directed.

Material supply only MS galvanised chain link fencing any size or type all specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards rails, straining bolts, etc, including provision of binding wire all specified and directed.

S&F 10 mm dia round bars as stiffening member in fencing including securing the fencing confirming to Fe-410-W (gde-E-250) qualiity A or Fe-290 (Gde-E-165) as link all specified and directed.

M&L for applying two coat of Black Japan paint over a coat of red oxide primer on steel surfaces of any descripition over 10 cm width or girth etc complete all specified and directed.

M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces all specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to entanglements aprons of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc all specified and directed.

Demolition floor, hearth or tiling including cement mortar bedding (but not backing)), removing serviceable tiles to store and rubbish off the premises all as specified.

M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles complete all as specified and directed.

M&L for 15 mm thick screed bed in CM 1:6 for laying floor tiles complete all as specified and directed.

M&L for light shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tile not exceeding .36 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.

Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed.

S&F Pre-Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.

S&F Pre-Painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.

Dismantling wrought iron or mild steel work of any description

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Gde-Fe 410-W (Gde E- 250) quality A.complete as specified.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles in walls.

M & L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and using PCC type C-1, 1:3:6 (20mm graded agg) and setting in cement mortar 1:6 complete.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, B-1 (1:2:4),(20mm graded agg) complete in walls.

M&L for precast cement concrete solid building blocks (1:3:6), type C-1, 10 cm thick (with plain or interlocking joints as directed) setting in cement mortar (1:4), complete, laying inner side of wall.

Material and labour for rendering 15 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces ,finished fair and even without using extra cement complete all as specified and directed.

Material and labour for rendering 15 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces ,finished fair and even without using extra cement complete all as specified and directed.

M & L 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whitening primer.

Preparing new plastered surfaces of wall and applying Two coats of acrylic distemper/ distemper oil emulsion (OBD), over a coat of 3mm thick wall care putty all as specified including preperation of surfaces

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Material & Labour for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces.

M & L for 50 mm thick II nd class local Hard wood clean sawn boarding with butt joints fixed with nails in any situation.

Dismantling of wall and ceiling board or insulation boards/slabs/blanckets/any thickness including cover fillets

S&F for anodised aluminium snap grid of size 605X605X mm frame work for false ceiling with aluminium anodized section size, wall angle 40mm X25mmX2mm thk, main/cross tee-section 36.5 X 25 X 1.4mm and 23.5mm X 26.4mm 1.4mm and susupended with 6mm dia GI wire respectively with and including 8mm thk laminated Gypssum board fixed to aluminium snap grid all as per clause 10.38.1 of SSR Part-I and as per manufacturer's instructions complete all as specified and as directed by Engineer -in-charge make:(i) Aluminium section : Valco,HINDALCO, JINDAL (iI) Gypsum Board: GYPSUM IND LTD,SAINT GOBLIN

S&F 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces completed all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete

S&F 30mm flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both side and both face is covered with decorative face veneer with lipping/frame tp match all as completed and specified as directed.

S & F 2nd class hard wood plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer 30mm thick

S&F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc

S&F MS window grills, window frames etc articles confirming to o Fe.290.Gde-E-165

S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed.

S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed.

S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed

S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed

S & F 150mm size extruded aluminium alloy handles, fabricated type anodised

S & F 100mm size extruded aluminium alloy handles, fabricated type anodised

S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed

S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece

S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.

S&F PVC coated 25mm dia mild steel chromium plated curtain rod of medium weight and including fixing brackets, finals and decorative end supports etc complete all as directed”

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.

M&L for 75 mm thick plain cement concrete type C-2, 1:3:6, (40mm graded stone aggregate)as in plinth protection, finishing the top surfaces even and smooth W/O using extra cement.

Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level)

M & L 75 mm thick Cement concrete type D2 1:4:8 (40mm graded aggregate) as in sub base, including form work complete all as specified and directed by Engineer-in-Charge

M&L for 20 mm thick screed bed in CM 1:4 for laying floor tiles all as specified and directed by Engineer-in-Charge

M&L Chequered cement concrete tiles 20cmx20cmx25mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry in floors completed all as specified and directed by Engr-in-Charge.

M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floor finishing cement concrete surface even and smooth using extra cement

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor & skirting.

M&L for rendering 10mm thick on fair faces of brick work of concrete surfaces CM(1:4) ,finished even & rough to receive wall tiles

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.

Dismantling timber scantlings in framed work 40sq. cm and over in section, in any position in wall or ceiling.

M&L for Second class hard-wood clean-sawn in frame work in scantlings in wall or ceiling.

S&F for 600mmX600mmX4mm thick E Board classic(Make-Everest industries Ltd) as in false ceiling including supply and fixing GI 'Tee'' grid frame work made of special section of M.S galvanized sheet 0.30mm thick,bottom portion painted with cellular nitro painting,warping the suspending wire around the existing wooden/steel purlin/rafter for suspended grid frame work of size 605mmX605mm suspended with 4mm dia GI wire @ 1200mm c/c on main Tee and fixed to T-grid with the help of level clip or as per manufacturer directions.The section consisting of main Tee 37mmX24mmX0.60mm,cross runner Tee 37mmX24mmX0.60mm and perimeter angle of 24mmX24mmX0.50mm thick.Perimeter angle to be fixed to wall with GI screws of 40mm long @ 450mm c/c along the perimeter of wall including applying two coats of distemper oil emulsion complete all as specified and directed.

S&F in repair Plywood 4mm thick , grade BWR,type BB, fixed with nails to timber frame work in ceiling all as specified

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S & F plain aluminium composite panel 04mm thick with powder/rough PVDF coated, anti-bacterial and fire proof any colour suitable for exterior and interior with complete all as specified and directed.

S&F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified.

S&F Aluminium (die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

S&F for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m in each pane complete all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material(soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil

M&L PCC 1:4:8 type D2(using 40mm graded aggregate)as in foundation filling and mass concrete etc.

M&L for Cement concrete in foundations, filling and mass concrete B2 1:2:4 (using 40mm graded aggregate) complete all as specified and directed by engr in charge

M&L for MS TMT bars 10mm dia and over, cut to lenth, bend to shape required, including cranking, bending, sprially for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

M&L for MS TMT bars 06 mm dia and over, upto and including 10 mm dia in stirrups, spaces and binders.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter,fair finished complete as specified.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions

M&L RCC B-1 1:2:4(20mm graded agg) Foundations,including rafts,footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete complete all as specified and directed by engr in charge

M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in beams, plinth beams, cantilevers, bressummers, lintels over 1.5 m span etc complete.

M&L for RCC B-1 1:2:4(20mm graded agg) Columns, pillars, piers, posts and struts complete all as specified and directed by engr in charge

M&L for Preparing new plastered surfaces of wall and applying Two coats of Cement Base paint over a coat of Chalk whitening on walls.

Supply and fix in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.. complete connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete.

S & F in rep 10 litres PVC, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets complete.

S & F PVC connections 15mm size with PTMT nuts of length 450mm

S&F in rep Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F 15 mm dia bib taps, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S & F in repair chromium plated 15mm dia Bib taps Fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified

S&F 15mm bore angle stop valves, fancy type chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions & fixed.

S&F in repair Angle stop valve 15mm of PTMT any colour high pressure screwed for iron pipe and fixed in repair, (Minimum weight 15mm-90gms) complete all as specified.

M&L for Supplying and laying 16mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F in repair vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in ends of brackets or errecting stand , waste pipe and CI brackets complete all as specified and directed.

S & F Cast iron floor trap 75mm, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls

S&F PVC (SWR) junction single, (single T) equal or unequal with access door 110mm dia.

S&F PVC (SWR) bends any radius, bend 110mm dia.

S&F PVC (SWR) vent cowl 110mm dia

S&F PVC (SWR) WC connector 110mm dia lip ring.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) bends any radius with access door, 75mm dia.

S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls .

S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls .

Supply and fix in rep 15mm Pillar taps fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface.

M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in sub base of floorings.

Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0.

S&F 32 mm bore Low density poly ethylene pipes of pressure rating 6kgf/cm2 fixed complete to walls,ceiling or in floors etc.

Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

All as per item No. 118 here in before but for one 3 pin socket outlet 6 Amps three pin controlled by one switch on independent board complete all as specified directed.

All as per item No. 118 here in before but for one 5 pin socket outlet 16 Amp and 6 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified.

All as per item No. 118 here in before but for one 5 pin socket outlet 16 Amp and 6 Amp Multipurpose independent using 4 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 4 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified.

S&F Socket outlet 2 in 1, 5 pin, 6 amp flush type

S&F Socket outlet 2 in 1, 5 pin, 6 and 16 amp flush type

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed.

Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

S&F LED light fitting 1x 20 Watt AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed

S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed/surface mounted type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 150/250 mm

Supply and fix high speed wall mounted fan 450mm sweep, 230V, 50 Hz, 2000 RPM , copper winding incl necessary mounting accessories complete

Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 8 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.

S&F MCB SPN having braking capacity 10KA, 32 Amps, C Curve 240 V complete all as specified and directed.

S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, C Curve 240 V complete all as specified and directed.

S&F of 1100 Volts grade heavy duty ISI marked cable PVC insulated multi stranded aluminium conductor one twin core cable flat or circular of size 16 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections , of size 16 Sqmm 2 core.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.

Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc)

Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC.

Taking down service wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC.

S&F LED lamp 9 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min).

S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 25 mm dia pipe and 02 numbersclmaps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed.

Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 4 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.

S&F in replacement of 1100 Volts grade heavy duty ISI marked cable PVC insulated stranded aluminium conductor one twin core cable flat or circular of size 10 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections etc

M/s Miza Enterprises (BID ID -3392953)

M/S L P ENTERPRISES (BID ID -3398648)

M/S R N ENTERPRISES (BID ID -3398577)

M/S N T ENTERPRISES (BID ID -3398658)

M/S PD ENTERPRISES (BID ID -3398779)

M/s Roltso Enterprises (BID ID -3398799)

M/S P K ENTERPRISES (BID ID -3398790)