Construction of Compound wall supply and insulation of furniure and library books for Knowledge center in Ward no 86, South Zone Coimbatore corporation

Providing Pile foundation of size 300 mm dia using augur including labour charges and all other tools and plants charges etc. , as per direction of dept officers (Local Rate)

Earth work excavation in all soils and Sub Soils with initial lead and lift including all Labour Charges as per the Direction of the Departmental officers etc. complete.

Cement concrete 1:4:8 mix ( One Cement, Four Sand , Eight Aggregate)using 40mm size HBG metal from approved quarry including mixing, laying, compacting, curing and all labour charges Complying with Standard Specification etc. complete

Centering with steel plates for sides & soffits using Ms sheets stiffend with MS angle for boarding including decentering after completing of Curing period complying with standard Specifications as per the direction of departmental offiers etc., complete.

Centering with steel plates for sides & soffits using Ms sheets stiffend with MS angle for boarding including decentering after completing of Curing period complying with standard Specifications as per the direction of departmental offiers etc., complete.

Supply fabrication and placing imposition of mild steel for steel rod of various sizes as directed including all labour charges for cutting and binding and tying with cost of binding wire, etc., complete as per standard specification.

R.C.C. 1:1.5:3 Mix (One cement one point sand Three hard broken granite stones) for all the reinforced cement concrete works using 20mm gauge hard blue granite stone jelly including cost and conveyance of all materials to site including all labour charges for concrete mixing, laying, watering curing properly excluding cost of steel and centering etc., complete complying with standard specification.

Plain Cement Concrete 1:2:4, one part of cement, one and two parts of sand , four parts of 20 mm hard blue granite metal by volume, characteristic strength not less than 20 N/sqmm) machine mixed for all reinforced Cement Concrete works, including scaffolding, cost of all materials, machine mixing, vibrating, lifting, curing, labour charges for laying & finishing etc., but excluding the cost and fabrication of reinforcements and also excluding centering and formwork etc., complete complying with the relevant standard specifications at all leads inside the building.

Flyash Brick work in cement morter 1:5 mix (One Cement, Five Sand) using 2nd Class Ground moulded chamber burnt bricks from approved chamber with standard size (230 x 110 x 70 mm ) and quality as per the Direction of the departmental officers etc., Complete.

Plastering on Wall surfaces using cement mortar 1:5 (One part of cement, five parts of sand by volume) thickness 12mm (average) for all internal/external surfaces like superstructure, rainwater ducts, elevation

Plastering on Wall surfaces using cement mortar 1:3 (One part of cement, Three parts of M sand by volume) thickness 20mm (average) for all internal/external surfaces like superstructure, rainwater ducts, elevation

Supply and Fixing of Cuddappa Slab of 40 mm Thick including cost and conveyance of all materials and labour charges etc. complete.

Supplying and fixing of MS truss and Purling MS angle for frame, 25x25x5mm for shutters alround, at center and for diagonals for stiffeners and 3mm MS gusset plates at the jnctions and corners and using 18 gauge MS plate for shutters with necessary hinges, tower bolt and locking arrangements complete including applying a priming coat of approved steel primer.

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental

Painting with Plastic emulsion paint in two coats over a base coat of Primer in approved colour and quality including scrapping and POP putty work whereas it necessary etc., complete.

Painting with Enamel paint of approved colour and quality over New iron work for doors, windows, grills, weldmesh, screen etc., as per the direction of the departmental ooficers Etc., Complete.

Paving the floor with Vitrified Floor Tiles of size 60 X 60cm of approved brand and colour Marbonite tiles in all floors base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality Marbonite tiles of size 60 X 60cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc., complete complying with standard specification

Stucco Plastering 12 mm thick using blue granite chips of size 10 mm and below over a base plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)), 12mm thick,including cost and conveyance of all materials to site etc,completeas per standard specification

Supplying and laying in flooring with fully polished Sinthetic Grey colour Granite stone of 20mm thick (average) of 4' X 2' in size laid over base layer of cementmortar 1:3 (one cement and three Plastering sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil)

wiring with 2x1.5sq mm (22/.3) PVC insulated SC unsheathed copper conductore cable of 1100V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories in flush with wall with 150mmx100mmx75mm MS switch box with 3mm thick hylem sheet cover for 5A 3pin interlocking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed Plug point. (SD 12)

Supply and run of 2 of 4 sq.m (56/0.3)PVC insulated SC unsheathed CU.Conductor of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.(SD 44)

Supply and fixing of single box type 4"40W flu fitting completed with copper choke and condensor,with condult pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with Tube (SD 87)

Supplying and fixing of 1200mm(48")sweep AC ceiling fan complete with stepped electronic 300W Regulator with 1 metre down rod with fan clamp with side plates and crpss arm of size 450mm(16") (SD 106)

supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B)with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting

Providing 7 rows "Y" type barbed wire fencing over compound wall using "L" angle 50X50X6mm fixing 1.35m ht. 2.40m C/C C.C 1:3:6 mix using 20mm jelly

Supplying and filling in foundation and basement with Well Gravel in layers of notmore than 15cm thick well rammed watered and compacted etc., complete complyingwith standard specification

Supplying and fixing of 1200 mm RCc Circular ring of 50 mm wall thick including all labour charges and transportation to site and all other fixing charges etc comple as per direction of the departmental officer

Supplying and fixing of 1200 mm dia RCc Circular Slab of 100 mm thick including all labour charges and transportation to site and all other fixing charges etc comple as per direction of the departmental officer