Supply of Labour for 100KL Under ground RCC Water Tank and Drain work and Boring Drilling bore and Pump House and Fountain work at Rajkiya Pahsudhan Evam Krishi Prakshetra Bharari Jhansi

Amount

Supply of Labour (100 Kl Under Ground RCC Water Tank)

Labour work i/c shuttering, binding and casting complete with all respect

Supply of Labour (Drain work 300mmx300mmx450mm size)

Clearing of Jungle direction bt Engineer in charge

Excavation in Foundation in ordinary Soil (Loam clay ,or sand) i/c lift upto 1.5 metre (5fts.) and lead upto 30m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space betbeen the building and the sides of foundation trenches or into the plinth and removal and diposal of surplus earth as directed by the Engineer -in -charge upto a distance of 30m. (100fts.) from the foundation trenches Labour and T&P.

laying and consolidation of blanket coat sand filling i/c supply of all material labour and T&P etc.

Providing and laying of base concrete in 1:4:8 (cement:coarse sand:stone ballast 40 mm Nominal size ) and curing complete in foundation and floors. including Labour and T&P.

Class-150 bricks work in (1:4)/(1:6) cement and coarse sand of 1.25 finensess modulous mortar in foundation and plinth i/c supply of all Labour T&P etc. required for proper completion of work

Providing and laying of base concrete in 4:2:1 stone Grit 20mm, Nominal size approved coarse sand cement and curing complet in foundation and floors. including Labour and T&P

12mm to 15 mm thick plaster with 1:4 cement and coarse sand neat cement finish of 1.25 F.M. mortar i/c supply of all materials Labour and T&P etc. required for proper completion of the work. (Edging/Drain

Shifting of bricks by head load

Shifting of C.Sand by head load distance above 60 metre.

Shifting of Cement by head load.

Filling and leveling excavated earth i/c labour T&P etc.

M.S. iron work i/c cutting, placing supply of binding wire. direction by EIC

R.C.C. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in Lighter beam having spans above 6m .excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and also including Supply of all materials, labours and T&P etc. required for proper completion of work binding wire cost being including in the item

Laying and consolidation of blanket coat stone dust including supply of all materials, labour and T&P.

230 mm thick bricks works in 1:6 cement and coarse sand of 1.25F.M. mortar in plinthsupply of all materials, labour and T&P etc. required for proper completion of the work. But in super structure in 230mm wall including providing scaffolding rope, chahlies fixing and removal. In Super Structure.

25mm thick cement concrete flooring 1:2:4 (1cement:2coarse sand:4 graded stone aggregate of size 12.5mm and below) by laid over concrete finished with floating coat of neat cement (base concrete to be paid separately) including fixing of glass strips. (Excluding cost of glass strips.)

Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrougth to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping and hooks.

Supply of Labour (230 mm boring/driling bore)

230 mm boring/driling bore

Lowing of PVC pipe

Lowing of submer sible with starter,cable and all naccesary fitting

Supply of Labour (Fountain)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

Lean concrete in 1:4;8

M 150. brick work in 1:6 cement and fine sand of 1:25 F.M mortar in foundation and plinth including supply of all material , labours and T&P etc required for proper completion of the work .

M 150. brick work in 1:6 cement and fine sand of 1:25 F.M mortar in Super structure and plinth including supply of all material , labours and T&P etc required for proper completion of the work .

R.C.C work in 1:11/2:3 cement approved coarse sand and 20 mm gauge granite stone gritt for plinth beam excluding supply of reinforcement and its bending but including its fixing wire and binding the ase with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc. aslo including supply of all material , labour and T&P etc . required for proper completion of work . Binding wire cost being included in the item .

12/15 mmplaster in 1:6 cement:sand mortar in rough surface inluding all material labour T&P and safloding omplete

40 mm thick cement concrete flooring with concrete hardener topping,under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardenermix : 2 graded stone aggregate 6 mm nominal size) by volume, hardeningcompound mixed @ 2 litre per 50 kg of cement or as per manufacturer’sspecifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Loose earth filling

making smooth surface of wall with birla white wall putty two coat

Apex paint two coat

Supply and filling of sand in plinth protection /appron

MS bars i/c cutting placing supply of binding wire

Supply of Labour (Pump House)

Clearing Jungle including uprooting of rank grass bush including Labour and T&P.

Excavation in Foundation in Soil mixed with moorum/shingle /kankar requiring the use of special T&P such as pickaxex, sabbles etc. , i/c lift upto 1.5 metre (5fts.) and lead upto 30m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts.) from the foundation trenches. ( add for 2 extra lift of 1.5 m)

Sand filling in plinth including supply of neccessary quantity of sand from a distance not exceding 8km(5miles) from the site of work and including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of the work.(Rate is including Royality)

Cement concrete in 1:4:8 with cement, Sand and 22.44-53 mm granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. Required for proper completion of the work.

M 150. brick work in 1:6 cement and fine sand of 1:25 F.M mortar in foundation and plinth including supply of all material , labours and T&P etc required for proper completion of the work .

R.C.C work in 1:1/2:3 cement approved coarse sand and 20 mm gauge granite stone gritt excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item.

Mild steel or iron in plain work such as reinforced concrete wrought to required same as neccessary including bending for proper completion of the work.

Earth filling in plinth including ramming dressing and extra cortage from 18 km leadditance complete work at site .

M 150. brick work in 1:6 cement and fine sand of 1:25 F.M mortar in s/s plinth including supply of all material , labours and T&P etc required for proper completion of the work .

Supply of approved M.S.Z section windows and ventilators excluding cost of glass panes but including supply of all materials its fabrication nut & bolt hold fast required complete of all respect at site .

Supply of M.S. angle iron door, ventilator frame made of approved M.S. Iron including drilling holes welding and hinges of required size , nut & bolt etc . As per drawing for proper completion of work at site .

providing and fixing 1mm thick ms sheet garage door with frame of 4x40 x6 angle iron , 3.15 mm thick ms gusset platees at the junction corner i/c supply and fixing of necessary fittings.

2cm (3/4") 20mm thick roof plaster in 1:3 consisting of one part yt. Cement and 2 parts of approved coarse sand laid in panels. Finished with 3mm (1/8") floating coat of neat cement or marble dust in ratio 5:1 including supply of materials bout T&P complete.

230 mm thick brick work in 1:4 cement and Coarse sand of mortor in parapet Wall including supply of all materials , labours and T&P etc required for proper completion of the work.

12/15 mm thick plaster in 1:6 cement mortar over brick work minimum thickness not to be less than 3/6"(12mm) thick including supply of all materials labour and T&P etc required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25 F.M. mortar .in wall inside.

White cement based putty 1 mm thick approved brand and making smood surfaces.

One Coat primar Two coat Oil Bound Distemper painting i/c material labour T&P

Finishing walls with two coat Premium Acrylic smooth exterior paint of approved quality including supply af all material, labour and T&P etc required for proper completion of work.

Two coat Synthatic enamel paint over new surface

40 mm thick C.C flooring 1:2:4 cement :C/sand and 20 mm stone grit. Excluding base concrete proper completion of work at site.

Fixing of glass strip

20 mm thick dado/Skirting with 1:3 cement and Coarse sand of mortor

Making Drip Course 1:2 cement sand mortar

Fixing 3.80mm thick glass Window With putty etc.

Water Supply (Labour With Material)

Providing and fixing Chlorinated Polyvininyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitting This including jointing of pipes & fitting with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20mm

Providing and fixing Chlorinated Polyvininyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitting This including jointing of pipes & fitting with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32mm

Providing and fixing Chlorinated Polyvininyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitting This including jointing of pipes & fitting with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 40mm

Providing and fixing Chlorinated Polyvininyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitting This including jointing of pipes & fitting with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50mm

Providing and fixing gun metal gate valve with C.l. wheel of approved quality (screwed end): 32mm

Providing and fixing gun metal gate valve with C.l. wheel of approved quality (screwed end): 40mm

Providing and fixing gun metal gate valve with C.l. wheel of approved quality (screwed end): 50mm

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock , with C.l. surface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation , foundation concrete 1:5:10 (1 cement : 5 fine sand :10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 neat cement complete as per standard desingn : With common burnt clay F.P.S (non modular) bricks of class designation 7.5

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock , with C.l. surface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation , foundation concrete 1:5:10 (1 cement : 5 fine sand :10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 neat cement complete as per standard desingn : With common burnt clay F.P.S (non modular) bricks of class designation 7.5

Pradeep kumar Upadhyay