SMART PERIODICAL SERVICES AND CERTAIN B/R WORKS ETC AT SECTOR 31 AND 47 CHANDIGARH UNDER GE (AF) CHANDIGARH.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement in and including taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, and removal of rubbish outside MoD land , complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement in and including taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, and removal of rubbish outside MoD land , complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & bittom of chajjas, beams, balcony ceiling ,roof slab ceiling etc.) finished the surfcae even and smooth without using extra cement in and including taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, and removing of rubbish outside MoD land , complete all as specified and directed by Engineer-in-Charge.

M&L for one coat of waterproofing primer and damp-proof primer @ 1 Itr per 50 sqft. diluted with 30% by water to be applied using an airless spray machine of with a flow rate of 2L per minute having a pressure of 3300 PSI. Allow 4-6 hrs to dry the surface for painting of subsequent coats, After priming applying two coats water based premium acrylic smooth exterior emulsion of approved colour with silicon additives, with heat Reflectant property which can reduce the painted surface temp. by 5 degree and gives excellent protection against UV attack with VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1L / 50 sqft. diluted with water as per manufacturer instructions applied over priming coat with airless spray machine of paint application with a flow rate of 2L per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed.

M&L for Putty of average thickness 1 mm over the plastered @ 1kg per sq. mtr. after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust by skilled labour. Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with a capacity of mixing 40kg putty in single go. The putty mixer should have variable speed functioning for preparation of smooth and lump free putty inlcuding M&L for one coat of waterproofing primer and damp-proof primer @ 1 Itr per 50 sqft. undiluted to be applied using an airless spray machine of with a flow rate of 2L per minute having a pressure of 3300 PSI. Allow 4-6 hrs to dry the surface for painting of subsequent coats., including M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 100 ft. The spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard-to-reach areas and penetration of distemper on the surface complete all as specified and directed.

M&L for complete removal of existing treatment from wall surface by scrapping and sanding with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of diameter of 7"/9" using a 80 grit sanding paper to make the surface free from dust, loose paint etc. by skilled labour complete all as directed including M&L for touch up putty application wherever required over the old painted wall @ 1kg per sq. mtr. Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with a capacity of mixing 40kg putty in single go. The putty mixer should have variable speed functioning for preparation of smooth and lump free putty including M&L for one coat of waterproofing primer and damp-proof primer @ 1 Itr per 50 sqft. undiluted to be applied using an airless spray machine of with a flow rate of 2L per minute having a pressure of 3300 PSI. Allow 4-6 hrs to dry the surface for painting of subsequent coats including M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 100 ft. The spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard-to-reach areas and penetration of distemper on the surface complete all as specified and directed.

M&L for complete removal of existing treatment by scrapping and sanding with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of diameter of 7"/9" using a 80 grit sanding paper to make the surface free from dust, loose paint etc. by skilled labour complete all as directed, after sanding, one coat of waterproofing primer and damp-proof primer @ 1 Itr per 50 sqft. diluted with 30 % by water to be applied using an airless spray machine of with a flow rate of 2L per minute having a pressure of 3300 PSI. Allow 4-6 hrs to dry the surface for painting of subsequent coats including M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additives, with heat Reflectant property which can reduce the painted surface temp by 5 degree and gives excellent protection against UV attack with VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1L / 50 sqft diluted with water as per manufacturer instructions applied over priming coat with airless spray machine of paint application with a flow rate of 2L per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed.

M&L for removing vegetation of any type form chajjas, balcony, mummty slab in any part of building including making good to distrubed surface with 50 mm thick pcc 1:2:4(20mm graded stone aggragate) mixed with water proofing compound, complete all as specified and directed by Engineer-in-Charge. Note :Cost of waterproofing compound included in the rate)

M&L for repairing the edges of concrete chajjas, facias, slabs, columns & the like by providing PCC (1:2:4) type B-0 including all necessary form work and rendering 15 mm thick (average thickness) in cement mortar (1:3), after applying a coat of cement slurry @ 3 kg/ Sq. m of surface, finished even and fair, surface area not exceeding 600 mm wide, in patches including taking down swollen/damaged plaster or concrete (up to 4th storey of Building) complete all as specified.

M&L for uprooting completely tree/ plants (upto 30 cm girth) from wall or any part of building upto double story buildings, making good disturbed portion and filling holes in cement mortar (1:3) & PCC (1:2:4) to match with the existing surfaces , complete all as specified and directed by Engineer-in-Charge.