Road safety works including crash barriers interlocking blocks retaining wall roadside drainage junction improvement at Barekhan Fanta and dholapani (Ch. 27/500 and 44/500), and slope stabilization from Ch. 84/0 to 85/0 on NH-56

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material up to a lead of 1000m including removal and disposal of top organic soil not exceeding in 150 mm thickness as per MoRTH specification clause 201. by mechanical means in light jungle

Construction of sub grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to require slope and compacted by vibratory roller 8-10 Tonne to meet requirement of Table 300-2 as per MoRTH specification Clause No. 305.

Milling of distress bitumenous layer upto 70mm depth in a single pass with suitable milling machine (capable of milling @ 200&300 sqm of area per hr) fitted with loading conveyer of loading the filled material directly on the trucks i/c hauling and stock pilling the reclaiming to bring to required specification to reuse with the approval of engineer - in - charge for safe disposal; with all leads and lifts complete in all respect as directly by Engineer - in- charge. *Note : The unutilized quality of reclaimed bituminous mix material shall be recovered.

Earth work in excavation in foundation trenches etc. .in drains and channels etc. not exceeding 2m.depth, including dressing of bottom and sides of trenches, stacking the excavated soil 3m Clear from the edge of excavation including disposal of surplus soil as directed within a lead of 1000 meters [MoRTH Specification : Clause 301,304] In ordinary Soil

Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400- 1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[MoRTH specification : Clause 401]. By mechanical means with all For Grading IV Material item no 4.3.4

Providing, laying, spreading and compacting stone aggregate for Wet Mix Macadam (as per table 400-12 and 400-13) specification including premixing the material with water to OMC in wet mix plant as per approved design mix, carriage of mixed material by Tipper to site, laying in uniform layers with motor grader/Front end Loader/paver finisher, in sub base/ base course on a well prepared under base and compacting with vibratory roller to achieve the desired density including lighting, guarding, barricading and maintenance of diversion etc. (MoRTH specification : Clause 406 & Clause 112) by mechanical means with all lead .

Providing and applying Primer coat over prepared surface or granular base with bitumen emulsion SS-1 as per IS: 8887 & manufacturer’s specifications @ 6 kg/10 sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification Clause 502 & 112 (Including cleaning of road surface).

Providing and applying tack coat on the prepared surface, with bitumen emulsion RS-1 as per IS: 8887 & manufacturer’s specifications @ 2 kg/10 sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification Clause 503 & 112 (Including cleaning of bituminous road Surface).

Providing and laying Dense Bituminous Macadam on prepared surface with specified graded crushed aggregates as per table 500-8 &500-10 and design mix for base/binder course including loading of material with Front end loader, heating of binder(including cost of anti-stripping compound wherever required) aggregate and filler as per table 500-9, In hotmix plant More than 60-90 TPH, transporting the mixed material by tippers and laying with sensor paver finisher as per clause 505.3.5 to the required level and grade rolling by self propelled power roller sand vibratory rollers or pneumatic tyred roller 150-250KN.TP 0.7MPa to achieve the desired density(approved by the department) but excluding cost of primer/tack coat. [MoRTHSpecification : Clause 505 & 112] with all leads Grading II (26.5mmnominal size) -Bitumen@minimum 4.5% of mix using VG 30 ( thickness 50 - 75 mm )

Providing and laying bituminous concrete as per design mix on prepared surface with specified graded stone as per table 500-16 & 500-17 for wearing course including loading of aggregate with front end loader and hot mixing of binder (including cost of anti-stripping compound wherever required) and filler as per table 500-9 with aggregates in hot mix plant more than 60–90 TPH, transporting the mix material with tipper and laying with sensor paver finisher (as per clause 507.3.5) to the required level, grades and rolling with vibratory compactor and pneumatic tyred roller 150–250 kN, TP = 0.7 MPa to achieve the desired density (approved by the department) excluding cost of primer/tack coat (MoRTH Specification Clause 507 & 112) with all lead.Grading II (13.20 mm nominal size) – Bitumen @ minimum 5.40% of mix, Thickness 30–40 mm, VG-40 Grade