REPAIRS REPLACEMENT OF GLASS PANES WIRE MESH DOORS WINDOWS INCLUDING JOINERY FITTINGS AND BATHROOM SANITARY FITTINGS PLUMBING WORK AND MISC REPAIRS AT NAYA RAIPUR MIL STN UNDER AGE I NAYA RAIPUR

Amount

S&F in repair 10 Ltr PVC valve less, syphonic action type flushing cistern low level with inlet, ball valve, float and handle including brackets and PVC out let suitable for IWC complete all as specified and directed.

S & F in repairs vitreous china wash basin , white flat back size 550x400mm excluding taps, chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S & F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S & F in repairs vitreous china squatting pan ' Orrisa' pattern size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe and complete including provision of lime concrete bedding complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan(pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe "P" or "S" trap (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphon age pipe etc. complete all as specified and directed.

S&F in repairs Towel Rail 600mm long of PTMT with and including CP brass screws complete all as specified and directed.

S&F in repairs 20mm dia Gun metal gate valve with iron wheel shed screws both ends for iron pipe complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs Toilet paper holder of chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair waste coupling with waste pipe of PTMT(half or full threaded) .(Minimum weight 32mm-45gms)for WHB complete all as specified and directed.

S&F in repair waste coupling with waste pipe of PTMT(half or full threaded). (Minimum weight /40mm-60 gms suitable for urinalscomplete all as specified and directed.

S&F in repairs to chromium plated steel soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair bib taps, 15mm chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bore Brass CP wall mixer for mixing hot & cold water screwed down , for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs Brass CP mixer (40 mm bore dia) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F 15mm angle stop cock cast copper alloy screwed down high pressure with fancy type chromium plated handle screwed both ends or for unions complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing complete all as specified and directed.

Refixing of 15mm bore steel tubing and connections complete all as specified and directed.

Refixing of 20mm bore steel tubing and connections complete all as specified and directed.

S&F for providing tubes 'medium grade' galvanised of bore 15mm bore with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

All as per item No 24 above but 20mm bore complete all as specified and directed.

Cleaning and removing all scale and dirt etc from over head water tank and mouth of circulating pipe, capacity of tank exc 250 ltr but n. exc 500 ltr complete all as specified and directed.

Cleaning and removing all scale and dirt etc from over head water tank and mouth of circulating pipe, capacity of tank exc 500 ltr but n. exc 1000 ltr complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT 15 mm dia with epoxy coated aluminium rod and high density plastic ball complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT 20 mm dia with epoxy coated aluminium rod and high density plastic ball complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT 25 mm dia with epoxy coated aluminium rod and high density plastic ball complete all as specified and directed.

S&F in repair grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

Dismantling water tank and removing to store and S & F Rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) hoisted and fixed in position 1000 Ltrs capacity including ball valve high pressure of PTMT of 25 mm (455 gms ) with epoxy coated aluminium road and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Dismantling water tank and removing to store and S & F Rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) hoisted and fixed in position 500 Ltrs capacity including ball valve high pressure of PTMT of 20 mm (210 gms ) with epoxy coated aluminium road and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs shower rose 125 mm brass chromium plated with swivel joints complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm with shutter (Without taking off shutters from the frame) & removing from site complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm and with shutter (Without taking off shutters from the frame) & removing from site complete all as specified and directed.

S&F Anodised aluminium frame for door section/ window section/ ventilator section for side hung type shutter /sliding type shutter/fixed type shutter in two or more tracks, including automatic locking handle , rollers and roller plate & fitting arrangement complete all as specified and directed. ( NOTE: Glass pane , hydraulic door closer , plush plate, floor hinges shall be measured and paid separately.

S&F Anodised aluminium door shutters, aluminium section, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips rubber packing anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150mm long (1No), hinge type B-21 100mm long (2 No) suitable handle (1No) complete all as specified and directed.

S&F sheet glass 5.5 mm thick ordinary quality and glazing fixed with aluminium section in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.

S&F galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

S& F for sheet glass 4mm thick, ordinary quality and glazing fixed with aluminium section in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.

M&L for 35mm thick 2nd class HW rail and style plain framed, factory made panelled shutter (one panel) without interlocking rail and 12mm veneered particle board with commercial veneering on both faces the size of rail and style as per IS -1003 (Pt-I)kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L 30 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified and directed.

S & F for 2nd Class Hardwood in Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided complete all as specified and directed.

M&L Rolled MS sections as in framing for cladding, glazing and the like including door frames/chowkats, roof trusses Joist, channel, angle, or tee sections fixed with angle cleats and connecting plates of grade Fe 410-W (Gde E-250), etc complete all as specified and directed.

M&L mild steel stairs (framed) including stringers, treads, landing, balusters, hand rails etc. including cleats, brackets, etc. complete and connecting plates of grade Fe 410-W (Gde E-250), etc complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 200 mm complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F MS 100 mm size butt hinges medium wt. of cold rolled complete all as specified and directed.

S & F Aluminium handles, cast type anodised 150mm size complete all as specified and directed.

S & F in repairs Door closer hydraulically regulated of Aluminium (Extruded section) body designation No.2, universe type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F in repair 20 mm dia decorative type curtain rod with rings and brackets complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S &F Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with het moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuch inside with solvent cement for stiles and plan colour PVC sheets for top rail, lock rail & bottom rail on either side & as fap insert for top rial & bottom rail, Penelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F in repairs sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plug washers and waste pipe including fixing cantilever bracket and connecting union to pipe over all size 495 mmx 420 mm bowl size 410 mm x 330 mm x 160 mm including cp waste coupling complete all as specified and directed.

M&L of two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces complete all as specified and directed.

M&L Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition and removing the rubbish to a distance n exc 100 mtr complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for reinforced Cement concrete in 1:2:4 type B1 (20mm graded stone aggregate) as in slab supported on wall beams and columns in floor roofs landing balconies canopies deck slabs and shelves and like complete all as specified and directed.

M&L for Granite of any size tiles 20mm thick machine cut stone slab over and incl 15 mm thick cement screed bed in CM 1:6 and jointed with grey cement slurry and pointed with white cement and ad mixture of pigment to match the slab of granite stone including grinding and polishing complete all as specified and directed.

S&F MS TMT bars 5 mm dia and over upto including 10mm dia in stirrups, spacers and binder cut to length, bent to shape required including cracking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Total contract sum shall be calculated after deduction of schedule of credit amount of Rs. 33,425.00.

ASHOKA ASSOCIATES