REPAIR / MAINT OF LT CABLES, STREET LIGHTS, LT PANELS, HIGH MAST LIGHTS, BAY LIGHT STAND, SUMMER APPLIACNES OF AT MAHIPALPUR UNDER GE SOUTH WEST NEW DELHI

Amount

M&L for servicising of Water Cooler of Capacity 40/80, 60/120,150/180 Ltrs and cleaning of cooling coil, condensing coil, air filters, compressors, fan motor etc with vacuum cleaner or cleaning solution complete all as specified and as directed.

Supply and fixing in replacement of starting relay with over load protector suitable for 40 to 150 Ltr capacity of water cooler complete all as specified and as directed.

Supply and fixing in replacement of 15 mm bore chromium plated self closing taps for water cooler complete all as specified and as directed.

Taking out the existing unserviceable compressor of any make from water cooler storage type capacity 40 to 150 Ltrs from any location and supplying installation & testing of new sealed unit compressor of similar capacity in same location alongwith test Certificate from manufacturer and cleaning of condenser by machine doing vaccum on the fully system and supply and charging of oil gas and other necessary lubricants including reconnecting the electric and water connections, transportaion & testing complete all as specified and directed.

Supplying and fixing in replacement of condenser fan motor 1/8 to 1/32 HP from water cooler cap 40 to 150 Ltr including the electric connections and testing complete all as specified and as directed.

Supplying and fixing in replacement of evaporator/condensing coil of water cooler capacity upto 150 Ltrs as per existing size and pattern, and refixing in same position complete all as specified & as directed.

Disconnecting from mains and taking down the unserviceable compressor unit of Refrigerator/Deep freezer of any make and type and providing new Compressor suitable for capacity upto 550 Ltr alongwith test certificate from manufacturer including filling of refrigrant gas and compressor oil complete all as directed. NOTE: The rates quoted by the contractor shall deemed to include the transportation cost from site of installation to contractor's repair workshop and back.

Supply & fixing in replacement of evaporator coil/freezer coil made out of aluminium press type of capacity 165 to 550 Itr with freezer frame and door including connection, complete all as specified & as directed. (Make - Whirlpool/Godrej/Kelvinator/LG/Samsung.)

Supply and fixing in replacement of electronic voltage stabilizer input voltage 170-270 V and out put voltage 230 volts suitable for 1.5 Ton Window/Split type Air Conditioner complete all as specified and directed. Make- V Guard / Microtek / Syspro / Patron / Candes

Supply and fixing in replacement of voltage stabilizer input voltage 170-270 and out put voltage 230 volts suitable for 2 Ton Window/Split type Air Conditioner complete all as specified and directed. Make- V Guard / Microtek / Syspro / Patron / Candes

Supply and fixing in replacement of eléctronic voltage stabilizer input voltage 170-270 and out put voltage 230 volts Capacity 4 KVA suitable for water cooler upto 150-LPH complete all as specified and directed. Make- V Guard / Microtek / Syspro / Patron /Candes

S&F in repair Plug top, 3 pin, 05 amps, 230 volt complete all as specified and directed.

S&F in repair Plug top, 3 pin, 15 amps, 230 volt complete all as specified and directed.

M&L for servicing of window type AC of 1.0/1.5/2.0 TR capacity, of any type/make, at site /wall, comprising of taking down carefully, removing power connections and front PVC grills, air filters, cleaning, washing, removing dirt, servicing including chemical wash of cooling coil, indoor cooling unit and condenser coil and providing oil and grease to all moving parts including condensing motor, checking and making electrica! connection with thimble testing & commissioning including refixing at the original position and all as specified and as directed.

M&L for servicing of split type AC of 1.5/2.0 TR capacity, of any type / make, at site /wall, removing front PVC grills, air filters, cleaning, washing, removing dirt, servicing including chemical wash of cooling coil, condenser coil oil and grease to all moving parts including condensing motor/Blower motor and testing complete all as specified and as directed.

Supply and fixing in replacement of wall mounted heavy duty metal stand bracket set ( set of 2 number) L type of size 17.5/19.5 inch for installation of outdoor unit of split AC 1.5/2 Ton complete all as specified and directed.

Supply and fixing in replacement of floor mounted AC stand made out of high quality metal material for installation of outdoor unit of split AC 1.5/2 Ton complete all as specified and as directed.

M&L for replacement of blower motor copper wound of window /Split type air conditioner 1.5 /2 ton capacity with same rating 220/230 volt complete all as specified and directed. (Make: AE/Electra/CG/JBB/Arihant)

M&L for replacement of blower motor blade of window type air conditioner 1.5 /2 ton capacity with existing size and type complete all as specified and directed.

M&L for replacement of blower wheel with existing size and type for window type AC 1.5/2 Ton capacity complete all as specified and as directed.

M&L for replacement of blower of indoor unit of split AC 1.5 Ton/Ton with existing size and pattern complete all as specified and as directed.

Supplying and fixing in replacement of Thermostat switch suitable for water cooler upto 150 Ltr /Refrigerator and Deep Freezer upto 550 Ltr / Widow type AC and Split type AC upto 2 Ton capacity complete all as specified and directed. (Make: Indfoss/Renutrol/Godrej.)

M&L for replacement of room temerature sensor suitable for window type/split type AC 1.5/2 Ton capacity complete all as specified and as directed.

M&L for replacement of suction / discharge valve of split AC 1.5/2 Ton complete all as specified and as directed.

M&L for replacement of fan/Blower motor copper wount 220-240 volts of window / indoor unit of split air conditioner 1.5 /2 ton capacity/ water cooler//Fridge/Deep Freezer with existing size and type complete all as specified and directed. (Make: AE/Electra/CG/JBB/Arihant)

M&L for replacement of fan motor blade of outdoor unit of split type air conditioner 1.5 /2 ton capacity with existing size and typecomplete all as specified and as directed.

M&L for replacement of swing blade/ flap set of indoore unit of split AC 1.5 Ton with existing type and set pattern complete all as specified and as directed.

M&L for replacement of capacitor 1 to 6 Mfd fan/blower motor of water cooler/AC/Fridge/Deep Freezer complete all as specified and as directed.

M&L for replacement of capillary copper tube pencil type for split AC 1.5/2 Ton/ Refrigerator and deep freezer upto 550 Ltr/Water cooler upto 150 Ltr complete all as specified and as directed.

M&L for replacement of polynet/PVC filter mesh complete set of split /window type AC 1.5/2 Ton with set existing size and pattern complete all as specified and as directed.

M&L for replacement of electronic remote device of split/Window type AC 1.5/2 Ton with existing make and pattern complete all as specified and as directed.

M&L for replacement of swing flap motor copper wound of split AC 1.5/2 Ton with existing size and pattern complete all as specified and as directed.

M&L for replacement front grill of window type AC 1.5/ 2 Ton capacity with existing make and pattern complete all as specified and as directed.

M&L for replacement heavy duty Copper drier filter for Split and window AC upto 2 Ton/ Water cooler upto 150 Ltr / Refrigerator and Deep freezer upto 550 Ltr complete all as specified and directed.

Supply fixing installation & testing in replacement of new sealed unit compressor of window upto 2 Ton capacity with similar size and pattern in along with test Certificate from manufacturer and cleaning of condenser by machine doing vacuum on the fully system and supply and charging of oil and gas and other necessary lubricants including reconnecting the electric connections, transportation & testing complete all as directed by Engr-in-charge complete all as specified and directed. (Make Tecumseh/Emerson/LG/ Blue Star/Carrier/Kirloskar/Hitachi / Mitsubishi/Dakin).

M&L for charging of refrigerant R-22 / R-410/R-407/R-134a or any other recommended refrigerant gas in 1.5/2 Ton window/split Air conditioner/ Refrigerator of capacity upto 550 Ltr/ Deep Freezer of capacity upto 550 Ltr/ Water Cooler of capacity upto 150 Ltr including detecting leakage and rectify the leakage with proper brazing and testing on full load complete all as specified and as directed.

S&F in repair starting/running capacitor 15 to 50 MFD, 240 volt suitable for water cooler/window AC /split AC including connection complete all as specified and directed. (Make : Havells / USHA / Tibcon / Epcos / Arcos / Indtech)

S&F in repair starting relay suitable for air conditioner 1.5/2 Ton/ Deep Freezer and Refrigerator any cap complete all as specified and directed. (Make : HI-Tech/ Classic/ Techunsh/ Renutrol)

S&F in repair magnetic contactor, 30 Amp to FL 40 Amp, single pole, 208-240 V AC, 50/60 Hz for split/window air conditioner incl connection complete all as specified & directed

M&L for powder coating paint on water cooler upto 150 Ltr/ refrigerator & Deep freezer upto 550 Itr capacity including minor denting and welding as required complete all as specified and directed.

M&L in repair copper tubing 1/2" dia with existing gauge for suction/discharge line of split air conditioner of RM1.5 Ton/Ton capacity including high quality put insulation complete all as specified and directed.

All as per above item but size 3/8" dia complete all as specified and directed.

M&I for replacement of black rubber heat isulation sleeve 3.2 mm wall thickness for suction and discharge copper tubing of split type Air Conditioner 1.5/2 TR complete all as specified and directed.

S&F in replacement hermetically sealed rotary type compressor unit of capacity 1.5/2 Ton for split type AC and charging of adequate quantity of refrigerant gas and oil with testing complete all as specified and directed. Make : Blue Star/Carrier/Kirloskar/Hitachi/ Mitsubishi/Dakin)

S&F in repair Power Circuit Board (PCB) suitable for split/ window type AC of capacity 1.5TR / 2.0 TR with all standard features i.e. power on-off, fan cooling speed, timer, temp etc complete of existing make and type complete all as specified and directed.. Make: Hitachi/LG/Carrier/GE/Blue Star/Voltas)

S&F in repair copper condenser /cooling coil unit of split type AC 1.5/2 ton of any make complete all as specified and directed. (Charging of refrigerant will be measured and paid separately) Make : Hitachi / LG / Carrier / GE / Voltas / Blue Star)

S&F 6mm thick plywood sheet (ISI marked), waterproof fixed in window of required size including cutting for passing air of desert cooler complete all as specified and directed.

M&L in replacement of condensing cooling fan motor 54 watt, 220-240 volts for outdoor unit of Split AC 1.5/2 Ton, single phase with copper winding complete all as specified and directed.

Supply and fixing in replacement of PVC flexible drain Hose pipe 15 mm dia with clamp complete all as specified and as directed.

Supply and fixing in replacement of PVC flexible drain Hose pipe 40 mm dia with clamp complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft and loose soil complete all as specified and directed.

Returning and filling in of excavated material any type including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.

Removal of surplus excavated material of any type not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for Sand cushioning/sand covering for underground cable protection complete all as specified and directed.. Note: Punned thickness only will be measured and paid.

Supply and laying sub class 'B' bricks of old size (approved size locally available) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge

Supply, fixing and testing straight through joint heat shrinkable type with jointing kit suitable for XLPE insulated armoured heavy duty aluminium conductor 1100 Volts grade Cable 3.5/4 core 16 Sqmm to 35 Sqmm size complete all as specified and directed.

Supply, fixing and testing end termination joint joint cold shrinkable type with jointing kit suitable for XLPE insulated armoured heavy duty aluminium conductor 1100 Volts grade Cable 3.5/4 core 25 Sqmm- 50 Sqmm size complete all as specified and directed.

Supply, fixing and testing end termination joint joint cold shrinkable type with jointing kit suitable for XLPE insulated armoured heavy duty aluminium conductor 1100 Volts grade Cable 3.5/4 core 25 Sqmm- 120 to 185 Sqmm Sqmm size complete all as specified and directed.

Supply & lay or fixing or passing through pipe or in cable ducts, 1100 volts grade, XLPE insulated, armoured, electric power cables (heavy duty) with aluminium conductor of the following sizes including taking down old one complete all as specified and as directed.

16 Sqmm 4 core

25 Sqmm 3.5 Core

50 Sqmm 3.5 Core

120 Sqmm 3.5 core

Taking down defective street light fitting of any size, type and capacity from height of pole / walls / high mast of any location exceeding 7.0 m height for repair work and re-fixing back after repair work is carried out including checking, inspecting, testing and commissioning complete all as specified and directed by Engr-in-Charge. Note: (a) The M&L for Items like ballast, lamp, igniters, capacitors, electronic drivers, surge protection devices etc shall be measured and paid separately under relevant items. (b) Necessary tools like ladders & other T&P required shall be arranged by the Contractor. (c) The rate quoted deemed to be inclusive for minor parts nut bolts, circle clips, clamps etc if any required at site. (d) The M&L for repairs to LED panel is not included in the scope and shall be measured and paid separately.

Supply only the following spares suitable for street light/flood light/post top lantern light fittings of Make: Havells / Bajaj / Philips / CG / GE complete all as specified and directed.

Electronic driver suitable for 200 to 250 W LED light fitting

Electronic driver suitable for 100 to 150 W LED light fitting

Electronic driver suitable for 70 to 90 W LED light fitting

Electronic driver suitable for 40 to 50 W LED light fitting

Surge protection device of capacity 10 KV suitable for LED light fitting

Taking down old unserviceable street light fittings from any height and Supply & fixing LED street light 100 W fittings comprising of epox New generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminum housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK08 with ingress protection IP 65/66 and SPD of capacity 10 KV including necessary clamps etc complete and testing on completion all as specified and as directed.

Taking down old unserviceable street light fittings from any height and Supply & fixing LED street light 70 watt fittings comprising New generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminum housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07. and testing on completion all as specified and as directed.

Dismantling old unserviceable flood light fittings from any position exceeding 16.0 m height, Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame LED 200w type with ingress protection IP 66 ingress protection 4kv in built and surge protection device of 10 KV capacity, cct 5700K etc including necessary angle iron supports duly painted in two coats over a coat of primer, clamps, nuts and bolts etc complete and testing on completion all as specified and as directed.

Dismantling old unserviceable flood light fittings from any position exceeding 16.0 m height, Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame LED 200w type with ingress protection IP 66 ingress protection 4kv in built and and surge protection device of 10 KV capacity, cct 5700K etc including necessary angle iron supports duly painted in two coats over a coat of primer, clamps, nuts and bolts etc complete and testing on completion all as specified and as directed.

S&F in repair PVC insulated 3 core 1.5 Sq mm stranded copper conductor cable for connecting junction box to street light fitting testing and commissioning complete all as specified and directed.

Supply and fix PVC (thermo plastic) street light junction box heavy duty with locking arrangement 3 phase aluminium bus bar incl 02 Nos PVC conduit upto the height of top most level of coping of pole from GL alongwith necessary MS clamp nut bolts and washers for fixing and 01 No MCB single pole 240 V 6-32 Amps complete including taking down old one complete all as specified and directed. (Make:- Sintex /Hensel)

M&L for preparation of old painted steel surfaces of 9 m long steel poles including removing oily/greasy spots and applying one coat of aluminium paint complete including applying a coat of white wash on pole coping and lettering the pole details with 125 mm dia adhesive sticker with white letters on blackground etc complete all as specified and directed.

M&L for fixing in repair adhesive sticker radium type red coloured water resistant of approx 2 inches width around the circumference of pole at a approx height of two meters complete all as specified and directed.

M&L for Repairs to High Mast/mid mast pole motor of Capacity 1.0 HP/0.75 KW 415 Volts 50 Hz 3 Phase 930 RPM and necessary rewinding with super enamelled copper wire all as per existing and servicing/greasing of reduction gear box complete all as specified and as directed by Engr-in-Charge.

M&L for Repair/ Maint of the control panel of High mast/Mid mast and replacement of all unserviceable parts such as contactors/timers etc complete including painting with a coat of synthetic enamel paint complete all as specified and directed.

Repairs to High Mast/mid mast of 12.5 m to 16 m height lantern carriage/winch, checking for movement, inspecting the alignment, replacement of broken/defective SS wire roper of size 6 mm 7/19 construction complete, replacement of 5 core 2.5 Sqmm flexible copper conductor, ERP insulated PCP/PVC sheathed trailing cable complete, testing & commissioning complete all as directed.

S&F in repair PVC insulated 6 core 2.5 Sq mm copper conductor cable for connecting highmast light fitting testing and commissioning all as directed.

Supplying and fixing in repair high bay light 200 Watt complete all as specified and as directed.

VINAY ENTERPRISES

Saini Enterprises