Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | LI₹49.6 LAccepted-AOC | ₹49.6 L | LI | Accepted-AOC accept |
| 2 | LII₹50.3 LRejected-AOC WARD NO 18 BEHIND DHSK COLLEGE NALIAPOOL PO PS DIBRUGARH PIN 786001 | DIBRUGARH | ASSAM | 786001 | ₹50.3 L | LII | Rejected-AOC accept |
Tender Value
₹39.3 L
EMD Value
₹78,694
Closing Date
18 Jan 2023, 2:00 pmClosed
Superintending Engineer, PWD Dibrugarh Building Ci
Superintending Engineer, PWD Dibrugarh Building Circle, Dibrugarh
Repair and Renovation in B Sc Nursing Hostel and construction of Generator Shed and Dustbin in B Sc Nursing College Bldg situated at Assam Medical College and Hospital Campus Dibrugarh
2023_PWBNH_28744_1
SE(B)/DIB/CS-12/22-23/1156-A
Open Tender
Civil Works - Building
Item Rate
180 days
Assam Medical College and Hospital Campus Dibrugar
Please refer Tender documents.
6 documents required · 6 mandatory
₹800
₹78,694
Yes
Superintending Engineer, PWD Dibrugarh Building Ci
13 May 2023
10 Jan 2023
18 Jan 2023
10 Jan 2023
18 Jan 2023
10 Jan 2023
11 Jan 2023
Amount
9.1:- Providing wood work in frame of doors, windows, clerestory windows and other frames, wrought framed etc. as directed. 9.1.1.: Second class teak wood.
9.20:- Providing and fixing ISI marked flush door shutters conforming to IS 2202 (part-I) decorative type, core of block board etc. shutters. 9.20.1:-35mm thick including ISI marked stainless steel butt hinges etc.
9.119:- Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet etc. complete.
9.118.3:- 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmx25mm … etc. at appropriate places.
9.96:- Providing and fixing aluminum sliding door bolts, ISI marked anodized (anodic coating not less than grade AC … etc. 9.96.1:- 300x16mm
9.97:- Providing and fixing aluminum tower bolts, ISI marked anodized etc. complete. 9.97.1:- 300x10mm
9.100:- Providing and fixing aluminum handles, ISI marked, anodized (anodic Coating etc. complete. 9.100.1:- 125mm.
/13.5:- 15mm cement plaster on rough side of single or half brick wall of mix : 13.5.1 :- 1:4.
13.91 :- Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering etc. complete.
13.60:- Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: 13.60.1:- Two or more coats.
13.48.3 :-Painting steel work with Deluxe Multi surface paint to give an even shade. Two or more coat applied @ 0.90 ltr./ 10 sqm over an under coat etc.
13.45 :- Finishing walls with textured exterior paint of required shade :13.45.1 :-New work (Two or more coats applied @ 3.28 ltr./10 sqm) over and including priming coat etc. complete.
2.6 :- Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width etc. as directed. 2.6.1 :-All kinds of soil.
11.2 :- Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12mm mud mortar, etc. clay non modular bricks.
4.20 :- Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work etc. complete as directed.4.20.1 :-All works upto plinth level: 4.20.1.1 :-Concrete of M10 grade with minimum cement content of 220kg/cum.
5.22 :- Steel reinforcement for RCC work including straightening, cutting, bending, placing in position etc. complete as directed. 5.22.6 :-Thermo-Mechanically Treated bars of grade Fe-500D or more.
5.9 :- Centering and shuttering including strutting, propping etc. and removal of form for- 5.9.1 :-Foundations, footings, bases of columns, etc. 5.9.5 :-Lintels, beams, plinth beams, girders etc.
5.1 :- Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, etc. complete- All work upto plinth level. 5.1.2 :-1:1.5:3
10.16 :- Steel work in built up tubular (round, square, or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing etc. complete.10.6.2 :-Hot finished seamless type tubes.
12.1 :- Providing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter etc. complete required.12.1.2 :-0.80mm thick with zinc coating not less than 275 gm/m2
6.1 :- Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :6.1.1. :-Cement mortar 1:4
2.27 :- Supplying and filling in plinth with sand under floors, including watering, ramming, etc. complete.
11.5 :- 62mm thick cement concrete flooring with concrete hardener topping, under layer 50mm thick cement concrete 1:2:4 etc. complete.
13.9 :- Cement plaster 1:3 finished with a floating coat of neat cement.13.9.2 :-20mm cement plaster.
2.28 :- Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15cm deep and disposal of rubbish etc. 2.28.1 :- All kinds of soil
NS: - Any other unseen Item of work which may be required at the time of execution.
12.45 :- Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets etc. complete. 12.45.3 :-12.5mm thick tapered edge gypsum moisture resistant board.
17.3 :- Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend etc. required. 17.3.1 :-W.C. pan with ISI marked white solid plastic seat and lid.
18.7 :- Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain etc. complete as direction of Engineer in charge. Internal work – Exposed on wall. 18.7.5 :-40mm nominal dia pipes.
18.7.3 :- 25mm nominal dia pipes .
18.51 :- Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing etc.18.51. 1:- 15mm nominal bore
18.52 :- Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS 8931. 18.52.1 :- 15mm nominal bore.
M/S V. G. CONSTRUCTION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .