Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹15.5 LAccepted-AOC | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹18.1 L+₹2.4 L (15.2%)Rejected-Finance | L-2 | Rejected-Finance L-2 | |
| 3 | Rejected-Technical HOUSE NO 165 A VILLAGE POST MORTA DISTT GHAZIABAD U P PIN 201003 | GHAZIABAD | GHAZIABAD | UTTAR PRADESH | 201003 | - | Rejected-Technical Not recommended since not enlisted in required category |
Tender Value
₹17.5 L
EMD Value
₹35,000
Closing Date
15 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) FARIDABAD
GE (AF) FARIDABAD
PROVN OF CERTAIN LBW AND MINOR WORKS AT AF STN CHANDINAGAR AND AOR OF GE (AF) FARIDABAD (2ND CALL)
2022_MES_560031_2
GE (FBD)/AF-63/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Chandinagar
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) FARIDABAD
₹35,000
Yes
14 Feb 2023
1 Dec 2022
17 Dec 2022
1 Dec 2022
15 Dec 2022
1 Dec 2022
Amount
M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as in for fixing angle iron and coping including necessary form work.) complete all as specified and directed by Engineer-in-Charge.
M&L for Brick work with sub-class 'B' bricks straght or curved on plan exc 6 m mean radius built in CM 1:6 incl demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed by Engineer-in-Charge.
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surface fair and even including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engineer-in-Charge.
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 and finishing the surface fair and even incl taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
Preparation of new plastered surfaces and applying two coats of cement base paint in any colours on wall over a coat of primer complete all as specified and directed by Engineer-in-Charge.
Preparation of new plastered surfaces and applying two coats of distemper oil emulsion in any colours on wall over a coat of primer complete all as specified and directed by Engineer-in-Charge.
S&F for Pressed steel frames of size 125 x 60mm for doors , windows and ventilators etc, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed by Engineer-in-Charge.
S&F 35mm thick 2nd class hard wood plain framed, shutter(two panel) factory made with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (part I) ,kiln seasoned and chemically pressure treated fixing to frame/chowkhat complete all as specified and directed by Engineer-in-Charge.
S&F Butt hinges 100 mm long aluminium alloy anodised and fixed complete all as specified and directed by Engineer-in-Charge.
S&F 150mm aluminium extruded alloy handles fabricated type complete all as specified and directed by Engineer-in-Charge.
S&F 150 mm alumunium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.
S&F 300 mm long aluminium alloy anodised, sliding door bolt with hasp ,staple(bolt type) and fixing clips of sheet cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.
Preparation of new steel surfaces in any description not other wise described over 10cm width or girth and applying two coat of synthetic enamel paint in any colours over coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.
S&F 35 mm thick 2nd class HW glazed & skelton shutters open riveted and prepared to receive glass gaugze etc. divided in to squares with plain chamfered are rounded mitred and revated sash bars any numbers complete all as specified and directed by Engineer-in-Charge.
S/F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks/galvanised wire staples/screws/welding etc complete all as specified and directed by Engineer-in-Charge.
Excavating in post holes in hard/dense soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed by Engineer-in-Charge.
M&L for mild steel work for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-Charge.
S/F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
M&L in applying two coats of synthetic enamel paint over a coat of red oxide primer to new steel and iron surfaces over 10cm in width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engineer-in-Charge.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering fixed on curved truss, gutters etc fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
S&F in repair of high performance industrial roof vents (Turbo Ventilators) made of aluminum alloy, designed to meet wind speed of 200 km/hour and to the entry of wind driven rain at a range of 2.5 litres/sec under cyclone condition and the profile of the turbo ventilator should match with the profile of the roofing sheet. The size of the turbo ventilators should be 24". The payment will not be made for the roofing sheet moulded with the turbo ventilators. Ridge profile to be matched with roofing she complete all as specified and directed by Engineer-in-Charge.
S&F of Fibre Reinforced acrylic roofing sheets 3mm thick of light blue / white shade of approved brand to match with Roofing sheet including cost of all materials such as self-driven bolts, nuts, washers etc and fixing at all heights of the factory blocks etc complete all as specified and directed by Engineer-in-Charge. Note :- The above works have to be executed in G+2 bldgs. The rates are inclusive of necessary scaffolding and safety measures. The contractor has to protect/safe existing synthetic floors.
M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLS) size 1.5 sqmm drawn in and incl PVC casing and caping with fixing accessories for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as specified and directed by Engineer-in-Charge.
All as per item No 25 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5 sqmm wire with 1.5sqmm earth wire complete all as specified and directed by Engineer-in-Charge.
All as per item No 25 above but for 3/5 pins socket outlet 15 Amps independent with 2.5 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge.
S&F switch piano flush type/Bell push, 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F socket 3/ 5 pins, 6 Amp, flush type piano (multi purpose) 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F Socket 15 Amps flush type,3/ 6 Pin, 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F switch 15 Amps flush type 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F ceiling rose, PVC / Polycarbonate isolated body ,surface backlite, 65x50mm, three terminals, 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F Skylite recess mounting,36W, LED 2'x2' luminaire integrated electronic driver, optics diffused, complete including electrical connection with copper cable from ceiling rose to fittings complete all as specified and directed by Engineer-in-Charge.
M & L for Provision hole on wall with PCC, Plaster, finishing, matching colour of white washing on wall inner/outer side and nut bolt as required, suitable size for hanging/fixing the exhaust fan for suitable size 300 mm sweep with louver, complete all as specified and directed by Engineer-in-Charge.
S & F exhaust fans made of PVC plastic body complete with louver shutter of size 300 mm sweep, 1200 RPM, 230 Volt , AC,50 Hz complete all as specified and directed by Engineer-in-Charge.
M&L for Design development supply commissioning and testing EHCC certified ground terminal earthing system hollow tube solid bar CCPRI tested for sensitive signal/Electrical equipments highly anti corrosive long life severe wear conditions in the earth pit and of standard size ISI marked copper tube out side secondary conductor of 50mm dia and main primary conductor inside 25mm dia 3000mm length ready to install with suitable connecting terminal confirming to IS:3043 1987 specification highly conducive packing material to be filled in earth pits for providing uniform low resistivity anti corrosive hygroscopic medium around the earth system for improving the efficency of current dissipation 20 Kg per bag (3 bag per kit) min or sufficeient quantities required as per site complete incl PCC pits of inside dimension 0.5x0.5x0.5m and suitable cover complete all as specified and directed by Engineer in Charge
S&F of Copper strip 20 x 3.0 mm fixed with top of insulator/saddles, fixing with screws , washer etc with help of drill machine for roof conductors and down conductors above ground and and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Engineer in Charge
High Tech Metal India
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .