Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.6 LAccepted-AOC | L1 | Accepted-AOC Being overall rate reasonable | |
| 2 | L2₹39.2 L+₹6.7 L (20.6%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹41.3 L+₹8.8 L (27.0%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹41.9 L+₹9.4 L (28.8%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹42.4 L+₹9.9 L (30.5%)Rejected-Finance | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹49.4 L
EMD Value
₹98,700
Closing Date
1 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KIRKEE
GE CENTRAL KIRKEE RANGE HILLS ROAD KIRKEE PUNE-411003
SPECIAL REPAIRS TO BLDG NO P196 OF BURR ROAD OF 55 COY ASC SUP PROVISION OF DRAINAGE LINE NEAR BLDG NO P 25 AND P 2 AT ME LINE AND OVERHEAD SHELTER WITH VALLEY GUTTER TO COVER THE OUTDOOR UNITS OF PAC AT DRDC CO CAFVD UNDER GE CENTRAL KIRKEE
2022_MES_536111_1
8672/E8 OF 2022-2023
Open Tender
Civil Works
Item Rate
150 days
KIRKEE
Class D Category a(i)
7 documents required · 7 mandatory
₹500
Yes
GE CENTRAL KIRKEE
₹98,700
Yes
1 Sept 2022
6 Jul 2022
3 Aug 2022
6 Jul 2022
1 Aug 2022
20 Jul 2022
6 Jul 2022 - 19 Jul 2022
Amount
Taking down chowkats and frame n.exc 1.5 Sqm each including shutters without taking off shutters from the frame and removing from site complete all as specified and as directed.
Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site complete all as specified and as directed.
Taking down shutters of any description n.exc 1.00 sqm each resecuring, easing , adjusting and re-fixing in same opening after minor repairs including all necessary fittings complete all as specified and as directed.
Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each resecuring, easing , adjusting and re-fixing in same opening after minor repairs including all necessary fittings complete all as specified and as directed.
Taking down shutter of any description n.exc 1 sqm each and removing to store complete all as specified and as directed.
Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing form site complete all as specified and as directed.
Supply and fix Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, ventilator with double rebates including necessary fixing lugs, hinges, lock strike plate etc, Material and labour for providing PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.
Supply and fix 35 mm factory made shutters of second class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkat complete all as specified and as directed.
Supply and fix 35 mm thick 2nd class hard wood glazed/gaused and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat, complete all as specified and as directed.
Supply and fix Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.
Supply and fix in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and plate fixing in wooden or steel door frame using nails or welding complete all as specified and as directed.
Supply and fix in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.
Material and labour timber scantling, 2nd class WH, plain fillets, square, rectangular or triangular in section, wrought, fixed with screws, sectional area exc 15cm but n. exc 25sqcm Including dismantling existing, complete all as specified and as directed.
Supply and fix 25mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/frame to match as in cupboard door shutters complete all as specified and as directed.
Supply and fix in repair 18-19mm thick prelaminated particle board prelaminated one side grade 2 quality interior grade commercial type including 6 mm thick teak wood leaping, as in cupboards, kitchen cabinet, pelment box and in similar works complete all as specified and as directed.
Supply and fix Continuous (piano) hinges, mild steel, bright finish or electro galvanised Width of flaps (when open) in 40mm complete all as specified and as directed.
Supply and fix in repair 100mm Hasp and staple, safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
Supply and fix 100mm long stainless steel medium weight but hinges for door shutter and frames/welded to frames complete all as specified and as directed.
Material and labour 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.
Material and labour 150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.
Supply and fix 300mm long mild steel sliding door bolts, bolt or clip type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
Supply and fix in repairs 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.
Supply and fix Factory made internal PVC door frame of size 50x47mm single revated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed.
Supply and fix 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.
Supply and fix 75mm long stainless steel medium weight but hinges for door shutter and frames complete all as specified and as directed.
Supply and fix aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and as directed.
Supply and fix aluminium anodised handle, oval type, of size 150mm, fixed with screws or welded, complete all as specified and as directed.
Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc and making good the jambs and painting with existing surface matching complete all as specified and directed by Engr-in-Charge
Material and labour Machine cut cudappa stone slab 20-25mm thick as in Shelf/cooking platforms, and like over 15mm thick cement screed base in CM (1:4) and jointed in grey cement slurry mixed with pigment to match with shade of slab rubbing, polishing and rounding to edges includimg demolition of existing Shelf/cooking platform complete all as specified and as directed.
Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching complete all as specified and as directed.
Supply and fix frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.
Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primere complete all as specified.
Material and labour preparation of old painted steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamal paint complete all as specified and directed.
Material and labour preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
Material and labour preparing old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Demolition of existing lime concrete of any description and in any position not otherwise specifically provided for, including removing of debries complete all as specified and as directed.
Material and labour PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete as sub base of floor complete all as specified and as directed.
Supply & providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd / Hyperplas manufactured by IWL Ltd having 10 years gurantee for water tightness complete all as specified and described as under:- (a) Preparation of sunken surfaceproviding 10 mm thick rendering in cement mortar 1:4 mixed with WPC @ 2 % by weight of cement and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufaturer's specification complete all as specified anddirected. (b) Supply & providing water proofing with polymeric proofing membran of 3Kg / Sqm HYPERPLAS STANDARD / MULTIPLAS STANDARD consisting of 100micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed. (c) GI pipe 40m bore light grade shall be embedded as outlet at the lowest portion for slope on the wall extending upto at least 450 mm beyond the outer wall
Material and labour taking down cement of cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.
Material and labour rendering 12mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6 complete all as specified and as directed.
Material and labour rendering 15mm thick in CM 1:4 over wall / concrete surfaces finished even and smooth without using extra cement with or without using water proofing compound @ 3% by wt. of cement complete all as specified and directed by Engineer-in-Charge. (Note: WPC shall be measured and paid seperately)
Material and labour 5mm thick rendering on concrete surface of ceiling in CM 1:3 and rendering is to be finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Demolition of brick /stone walls built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.
Material and labour for precast cement concrete block masonry of grade C-5 having density not less than 1800 kg/cum and 28 days average minimum compressive strngth of block should be 5 N/sqmm as in walling set in cement mortar 1:6 complete all as specified and as directed.
Material and labour preparation of new plastered wall surfaces and applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-charge.
Material and labour preparation of old plastered wall surfaces and applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper complete all as specified and as directed by Engineer-in-charge.
Material and labour two coats of white wash on walls including preparation of old decorated surface complete all as specified and as directed by Engineer-in-charge.
Material and labour preparation of new decorated plastered or unplastered surfaces of wall, and applying two coats of cement base paint (white or tinned) over a coat of alkali reistant primer complete all as specified and directed.
Material and labour preparation of old decorated plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moos efflorescent and trading oil and greasy spots and applying two coat of cement base paint (white or tinned) complete all as specified and directed.
Material and labour applying two coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and as directed by Engineer-in-charge.
Material and labour one coat of white wash on ceiling including preparation of old decorated surfaces complete all as specified and as directed by Engineer-in-charge.
Material and labour cement concrete type B1 1:2:4 (20mm graded aggregate)as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not proivded for in Item 159, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, complete all as specified and as directed by Engineer-in-charge.
Dismantling existing tanks, exc 250 ltr and n exc 500 ltr removing to store complete all as specified and as directed by Engineer-in-charge.
Supply and fix 500 litre capacity rotational moulded polyethylene water storage tank consisting of three layer cylindrical vertical with top closed hoisted and fixed in position complete all as specified and directed.
Supply and fix in repairs 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed by Engineer-in-charge.
Supply and fix 20 mm dia Ball valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and as directed by Engineer-in-charge.
Material and labour taking up or down existing steel tubing and connections 15mm bore including cleaning for refixing or removal to stores complete all as specified and as directed.
Material and labour taking up or down existing steel tubing and connections 20mm bore including cleaning for refixing or removal to stores complete all as specified and as directed.
Supply and fix 15mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and as directed by Engineer-in-charge.
Supply and fix 20mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and as directed by Engineer-in-charge.
Refixing 15mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed by Engineer-in-charge.
Refixing 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair Bib tap long body cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed. (Make Prayag Cat Part No :8308 or techno commercially equivalent make specified in PS)
Supply and fix in repair angle cock cast copper alloy chromium plated fancy type screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed. (Make Prayag Cat Part No :8310 or techno commercially equivalent make specified in PS)
Supply and fix in repair PVC connections 15mm dia with brass nut on both ends and washers 450mm long complete all as specified and as directed.
Supply and fix (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bore of pipe complete all as specified and as directed. (Make Prayag Cat Part No 8318/20 or techno commercially equivalent make specified in PS)
Supply and fix in repairs CP shower rose 225mm round with arm and flange including fixing to steel pipe fixed in repairs as directed. (Make Prayag Cat Part No BS -67 or techno commercially equivalent make specified in PS)
Supply and fix in repair 0.85mm thick stainless steel kitchen plate rack SIZE (24"X36"X10") three tire complete all as per Prayag Cat Part No P-336 or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Supply and fix PVC valveless, syphonic action type, flushing cistern, 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per ESSCO Cat No. WHE-WHT-183NL or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.
Material and labour Black Marble Work 18 to 20 mm thick (table rubbed and polished ) as in steps, jambs, pillars, window- cills, cooking platforms, and like over 15mm thick cement screed base in CM (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with shade of slab rubbing, polishing and rounding to edges including demolition of existing cill/cooking platform complete all as specified and as directed.
Supply and fix Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe, all as per CERA Cat No CALINA S 3010102 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repairs complete all as specified and as directed.
Supply and fix in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers & wastes including CI cantilever bracket & connection union to pipe over all size 915mmx460mm & bowl size 410 x330x160mm complete all as specified and as directed.
Supply and fix 32 mm bore PVC waste pipe of approved make suitable for WHB, Sink, Urinals etc complete all as specified and as directed.
Supply and fix Grating doom 125 mm dia with/without waste hole of SS complete all as specified and as directed.
Supply and fix in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and as directed.
Supply and fix in repair towel rail 450 mm long of PTMT fixed with and including chromium plated brass screw and wooden / plastics cleats ( min wt 170 gms) complete all as specified and as directed.
Supply and fix in repair of 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches, floor and wall including taking down old unserviceable pipe any description and any type complete all as specified and as directed.
Supply and fix in repairs PVC (SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floors and wall 75mm bore including taking down old unserviceable pipe any description and any type complete all as specified and as directed.
Supply and fix in repairs PVC (SWR) bends 110mm dia bore any radius with access door complete all as specified and as directed.
Supply and fix in repairs PVC (SWR) bends 75mm dia bore any radius with access door complete all as specified and as directed.
Supply and fix in repairs PVC (SWR) branch piece, single (single Y) 110 mm dia equal or unequal complete all as specified and as directed.
Supply and fix in repairs PVC (SWR) branch piece, single (single Y) 75mm dia equal or unequal complete all as specified and as directed.
Supply and fix in repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.
Supply and fix in repairs 110mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.
Supply and fix in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.
Supply and fix in repairs 75mm bore PVC (SWR) vent cowl complete all as specified and as directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed.
Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Material and labour 25 mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate as in leveling course Iincluding demolition of existing PCC complete all as specified and as directed.
Material and labour non skid ceramic coloured tiles, joint free 7 to 8 mm thick (square or rectangular) area of each tile exc 0.18 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles, over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.
Material and labour Non skid ceramic coloured tiles, joint free 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm (400X400X7mm) in skirting, over 10mm thick screed bed in CM 1:4 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed.
Supply and fix coloured non skid ceramic tiles 300 mm x 300 mm x 6 to 7mm thick, in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.
Material and labour Glazed ceramic coloured tiles in vertifical surface 450x350x7mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering backing coat in cement mortar 1:4 all as specified and directed.
Material and labour machine cut mirror polish kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners, rubbing and mirror polishing complete as specified and as directed.
Material and labour machine cut mirror polish kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners, rubbing and mirror polishing complete as specified and as directed.
Supply and fix in repairs Stainless steel fancy type curain rod 25 mm including SS brackets, decorative knobs, and including all necessary fittings such as rawl plug screws complete all as specified and as directed.
Supply and fix in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed.
Supply and fix in repair Soap dish, brass chromium plated, all as per Cat Part No BA-45 of Prayag or techno commercially equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Material and labour 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate laid in panels surface finish even and smooth without using extra cement as in plinth protection complete all as specified and as directed.
Material and labour 100mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base over rammed earth complete all as specified and as directed.
Material and labour 25/50mm thick crushed stone dust/sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
Material and labour 80mm thick machine pressed glossy finish precast concrete interlocking paver block any shape and size & Colour M-40 grade with grey cement no pigment confirming to IS 15658-2006 complete all as specified and as directed.
Removing old tar felt, all loose dirt, old roof tiles, including taking down cement plaster cleaning the concrete surface including removal & cleaning of vegetation, fungus, moss small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work and applying neat cement slurry @ 1.5Kg/Sqm complete all as specified and directed by Engineer-in-Charge.
Supply only integral water proofing compound of approved quality.
Excavation in trenches, not exceeding 1.5 metres wide and not exceeding1.5 mtrs in depth for foundations etc / for manhole and brick drain for getting out in soft/loose/hard soil and road cuttting complete all as specified and as directed.
Removing excavated material n exc 50m and depoting where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.
Material and labour for PCC 1:3:6 type B2, including necessary formwork using 40mm graded crushed stone aggregate, as in surface channels and drains etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge
Extra for forming fair finished to drain or channel 45 cm inner girth in cement concrete including forms, moulds, etc (inner girth only to be measured complete all as specified and as directed.
Material and labour brick work with fly ash old size bricks straight or curved on plan exc 6 m mean radius in CM 1:6 complete all as specified and as directed.
Material and labour for precast cement concrete 1:2:4 type B-1 (using 20 mm graded coarse aggregate) in cover slab set in CM 1:6 complete all as specified and as directed.
Material and labour for mild steel TMT bars 6 mm to 8 mm dia, cut to length, bend to shape required, including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
Excavating in post holes (or similar holes) in any type of soil each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil complete all as specified and as directed.
Material and albour for plain cement concrete type C2 (1:3:6) using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as specified and as directed.
Material and labour rolled mild steel Fe-410- W(Gde E-250) quality B in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicate complete all as specified and as directed.
Material and labour rolled mild steel Fe-410- W(Gde E-250) quality B in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed.
Supply and fix Pre-painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Material and labour plain, galvanised mild steel sheeting in ridges hips valley gutters drip and straight flashing (length and girth as fixed) by using 1.0mm thick sheet grade of zinc coating @275 Gms/Sqm both sides and welded or soldered joints including necessary fittings and including dismantling of plain or corrugated steel sheeting any gauge thickness (including Nainital or similar pattern) as in roof covering/vally gutters complete all as specified and as directed by Engineer-in-Charge. Note:-1. Work to be carried out in bldgs/Sheds hegiht of 15-20Mtr (Approximately) 2. Rate quoted by contractor shall be inclusive of dismantling and refixing of AC/GI (corrugated semi corrugated etc) sheets, Wired Figure Glass Light Ventilation at Valley gutters area in roof coverings complete all as specified and as directed.
Material and labour Hardcore (broken stones or boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
Taking down copper/aluminium point wiring ( light, fan, socket, power ) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surface of walls, floors, etc complete all as specified and directed.
Material and labour surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one Fan/Exhaust fan or one call bell point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc complete all as specified and as directed by Engr-in-Charge.
All as per Item No 122 above for One three pin 5 Amp socket outlet point with cables 1.5 sqmm size on independent board complete all as specified and as directed.
All as per Item No 122 above for One three pin 5 Amp socket outlet point with cables 1.5 sqmm size on same board complete all as specified and as directed.
All as per Item No 122 above but FRLSH copper stranded cable of size 2.5 sq mm for 3/6 pin socket outlet 15 amp on one independent board alongwith all fitting and accessories complete all as specified and as directed.
Material and labour surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one Fan/Exhaust fan or one call bell point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc complete all as specified and as directed by Engr-in-Charge.
Material and labour for sub main wiring with two single core PVC insulated multi stranded FRLSH Copper conductor cable of size 6.0 sqmm drawn through in and including PVC conduit with all accesories and one single core green colour FRLSH Copper conductor cable of size 6.0 sqmm as earth wire and connected to earth dolly and making good to disturbed surfaces completed all as specified and as directed by Engr-in-Charge. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping will be measured as one unit (RM)
Supply and fix stepped type electronic fan regulator for ceiling fans including necessary connections of capacity 100 watts. 240 Volt complete all as specified and as directed by Engr-in-Charge.
Supply and fix 5 Amp switch piano type single pole one way complete all as specified and as directed by Engr-in-Charge.
Supply and fix 5 Amp switch piano type single pole two way complete all as specified and as directed by Engr-in-Charge.
Supply and fix 5 Amp Bell push flush types complete all as specified and as directed by Engr-in-Charge.
Supply and fix socket outlet of 2 in 1, 3 pin 5 amp complete all as specified and as directed by Engr-in-Charge.
Supply and fix switch socket combination multipurpose outlet comprising of 3 pin 15 amp socket out let & switch one pin, 5 amp controlled by one switch suitable for 3 pin plug top complete all as specified and as directed by Engr-in-Charge.
Supply and fix ceiling rose surface PVC 65 x 50 mm two/three terminals complete all as specified and as directed by Engr-in-Charge.
S& F sheet metal enclosure for DBs SPN 8 Way double door type 230 Volts complete all as specified and directed by Engr-in-Charge.
Supply and fix in repair MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’B” curve complete all as specified and as directed by Engr-in-Charge.
Supply and fix in repair MCB, SPN 40 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve complete all as specified and as directed by Engr-in-Charge.
Supply and fix LED batten Light 20 watt, 4 feet AC, PF-0.95 (min), sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and as directed by Engr-in-Charge. (Make- Wipro cat part No-LL20-221-XXX-65AL1 or techno commercially equivalent in CG/Philips/Havells)
Supply and fix LED batten Light 10 watt, 2 feet AC, PF-0.95 (min), sleek and seamless profiled extruded polycarbonate batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and as directed by Engr-in-Charge. (Make- Wipro cat part No-LL20-111-XXX-65NE3 or techno commercially equivalent in CG/Philips/Havells)
Supply and fix lamp Holder insulated body with back plate for batten/angle complete all as specified and as directed by Engr-in-Charge.
Supply and fix LED Lamp 12 watt (B-22) pin type all as specified and directed by Engr in charge. (Make CG/Bajaj/ Philips/Wipro)
Supply and fix bell electric AC 240 volt, 50 HZ all as specified and as directed by Engr-in-Charge.
Supply and fix LED building security light 20 watt, 230V, with lens, PF-0.95 (min) complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20/40mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and directed by Engr-in-Charge. (Make-CG Cat Part No LSTS-20-CDL-M or techno commercially equivalent in Philips/Bajaj/wipro)
Supply and fix MCB DB double door 4 way TPN vertical with 200 Amps rated bus bar 240 volts complete all as specified and as directed by Engr-in-Charge.
Supply and fix MCB TPN 40 Amps, 415 volt 10 KA complete all as specified and as directed by Engr-in-Charge.
Material and labour for Rewinding of Ceiling fan 1400 mm/1200 mm sweep after dismanting complete motor assy, bearings, bushings, removal of burnt copper wire, cleaning of core, inserting proper insulating paper in slots, winding with and as per existing size/turn of super enamelled copper wire, heating, varnishing, replacement of unsv bearings / bushings, assemble of rotor and starter unit with capacitor, connecting wire, down rod, blades,one coat of painting complete with white enamel paint and testing complete including removal and refixing. Note: 1. Contractor will collect fans from site and bring back to site after repair. Cost of transportation will be inclusive of quoted rate. 2. Spares require for replacement such as bearing, Bushing, capacitor shall be measured and paid separately as supply only. 3. Cost of Connector block and capacitor holder shall be inclusive of the quoted rate.
Supply only ball bearing No 6201/6202/6203/6204 of SKF/Tata/NBC.
Supply only G.M. Bush for bearing for ceiling fan as per existing pattern.
Supply only capacitor AC for 230 volts 50 Hz of capacity 1.8 Mfd.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engr-in-Charge. (Note - Old UNSV ceiling fan deposit to MES store)
Supply and fix Exhaust fan 300 mm sweep made of with sturdy engineering plastic with louver shutter, 230 volt 50 Hz 1200 RPM, copper wound energy efficient all as specified and as directed.
S &F Exhaust fan 250 mm sweep made of with sturdy engineering plastic with louvre shutter,230 volt 50 Hz 1200 RPM,copper wound energy efficiant all as specified and as directed. Note - Old UNSV ceiling fan deposit to MES store
Material and labour for Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed by Engineer-in-charge.
MANIYA CONSTRUCTION CO
Veekay Enterprises
KARPE AND SONS CONSTRUCTION
M/S JAYCONSTRUCTION CO
V.R.PRAJAPATI AND CO.
VP DEVELOPERS AND CONTRACTOR
MAHESH DADAJI BACHHAV
Vastushilpa Contrustion
S.R.M.K Enterprises
DARSHAN ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .