Renovation and Up gradation of Lab. No. 204(A) for the Deptt. of Basic Science at Dr YSP University of Horticulture and Forestry Nauni- Solan.

Amount

Providing and laying cement concrete 1:8:16 (one cement : eight sand : sixteen graded stone crushed aggregate 20mm nominal size)and curing complete on slab and floor excluding the cost of form work screed laid under flooring complete in all respect as per satisfaction of Engineer-in-charge.

Providing & fixing Glossy double charge water proof stain & impact resistant heavy duty vitrified tiles (Premium Kazaria / Nitco/ Johnson/ Orientbell make) 600x600mm and 10mm thick or manufactured thickness of the above brand of approved shade and colour in floorings, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (One cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete in all respect as per satisfaction of Engineer-in-charge.

Painting one coat (excluding priming coat) on previously painted steel & other metal surfaces with enamel paint brushing steel & other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter by the Engineer-in-Charge. a) With enamel paint other than white

Extra for every subsequent coat of paint on steel complete in all respect as per satisfaction of Engineer-in-charge. a) With enamel paint other than white

Painting one coat (excluding priming coat) on previously painted wood & wood based surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter & sand papering & stopping including all leads and lifts of material as directed by the Engineer-in-Charge.

a) With enamel paint other than white

b) With white enamel paint

Extra for every subsequent coat of paint on wood complete in all respect as per satisfaction of Engineer-in-charge.

a) With enamel paint other than white

b) With white enamel paint

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete in all respect as per satisfaction of Engineer-in-charge.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete in all respect as per satisfaction of Engineer-in-charge.

15mm (fifteen milimetre) cement plaster in single coat in fair/rough side on brick concrete/stone walls for interior/exterior plastering with all height including arises internal rounded angles chamfers and/or rounded angles not exceeding 80mm (eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement: Six sand) including all leads and lifts and material as directed by the Engineer-in-Charge.

Removing of white washing or colour washing by steel with brushing and/or scrapping & preparing the surface smooth including necessary repair to scratches complete in all respect as per satisfaction of Engineer-in-charge.

Demolition of above ground level upto all floor level including disposal of unserviceable material within all leads complete in all respect as per satisfaction of Engineer-in-charge. i) Un-reinforced cement concrete upto 15 cm thickness.

Demolition of above ground level upto all floor level including disposal of serviceable material within all leads & lifts including cutting the necessary reinforcement & separating out from the R.C.C./R.B. work as per direction of Engineer-in-Charge.a) RCC work.

Demolition of brick work above ground level upto all floor level including stacking of serviceable material and disposal of unserviceable material within all leads & lifts as per direction of Engineer-in-charge. a) In cement Mortar

Dismantling tiled floor laid in cement Mortar upto all floor level including stacking of serviceable material and disposal of unserviceable material within all leads (wooden/concrete joists to be measured and paid for separately as per direction of Engineer-in-charge. a) For thickness of tiles upto 25mm.

Dismantling wooden boarding in lining of walls and partitions including frame work and stacking the materials within 20 Metres lead as per direction of Engineer-in-charge.a) Upto 10mm thickness.

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhat, architraves, hold fasts and other attachments etc. complete and stacking them including all leads, lifts & carriage of material. a) Not exceeding 3.00 Sqm in area.

Providing and fixing zebra roller blinds of superior quality with required accessories complete in all respect as per satisfaction of Engineer-in-Charge (Bizel/Nova/Vista Make).

Supplying and installation of Research module Laboratory Units (Waldner / Kotterman / Godrej make) with work surface of following size with V-groove type moulding jet black Granite 20mm + - mm thick as per layout along with neoprene strip 2.5” width and 6mm thick SR 998 glue for neoprene mat complete in all respect as per satisfaction of Engineer-in-charge as well as concerned deptt. The following size of storage unit and other articles of module labs. are as under . NOMENCLATURE CONTINUED TO 18.1

Storage Unit with Cam lock: 600 mm Depth. 750 mm Ht with metal shutter MT-1200W-750D-9H - 5 NOS. AT-600W-750D-9H - 1 NO. AT-1200W-750D-9H - 2 NOS. UBC-600W-450D-674H-2S-1D – 7 NOS. M-RS-1200 (3M+3M+3M ON BOTH SIDE - 1 NO. LS-P-600W-900H – 11 NOS. DOOR FRAME FOR INLINE SINK UNIT – 2 NOS. PP DROP SINK 560X355MM -2 NOS. MT-1050W-750D-9H – 1 NO. LS-P-600W-900H – 1 NO. DOOR FRAME FOR INLINE SINK UNIT -- 1 NO 3 WAY WATER FAUCET 100/32 – 1 NO. 3 MODULE PLATE – 10 NOS. 16A, 1 WAY SWITCH – MODEL NO. M0130 – 22 NOS. NOMENCLATURE CONTINUED TO 18.1

MT-1050W-750D-9H - 1 NO. AT-450W-750D-9H - 2 NOS. AT-1050W-750D-9H - 2 NOS. UBC-450W-450D-674H-1S-1D – 5 NOS. A-RS-1200 (3M+3M+3M ON BOTH SIDE - 1 NO. SIDE PANELS FOR SINK UNIT – 2 NOS. BRACKET FOR ISLAND TABLE - 3 NOS. 3 WAY WATER FAUCET 100/32 – 2 NOS. UBC-450W-450D-674H-1S-1D-1 NO. SIDE PANELS FOR SINK UNIT - 1 NO. PP DROP SINK 560X355MM – 1 NO. TRUNKING – 10 NOS. 6/16A, 6 PIN SHUTTER SHOCKET – MODEL NO. M1332 – 22 NOS.

Ravinder Kumar