COMPREHENSIVE REPAIR/ MAINTENANCE OF CERTAIN BLDGS OF B/R NATURE AND REPAIR TO JOINERY WORKS INCLUDING DOORS, WINDOWS, ROLLING SHUTTERS AND CLEANING OF OVERHEAD WATER TANK IN SOUTH SIDE OF RUNWAY UNDER AGE B/R-II IN TECH AREA AT AF STN BHISIANA

Amount

Taking down cement of cement lime plaster on brick or concrete surfaces, static water tanks etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engineer in Charge.

M&L for 15 mm thick Cement plaster in CM (1:4) on fair faces of brick or concrete wall surfaces and finishing the surface even and smooth (without using extra cement) complete all as specified and directed by Engineer in Charge.

M&L for 15 mm thick, Cement plaster in CM (1:6) on fair faces of brick or concrete on wall surfaces and finishing the surface even and smooth (without using extra cement) etc, complete all as specified as directed by Engr-in-charge

M&L for 5 mm thick cement plaster in CM (1:3) on fair faces of concrete surfaces as in ceiling and finishing the surface even and smooth (without using extra cement ) etc, complete all as specified and as directed by Engr-in-charge

M & L for preparation of new plastered surface of walls and apply two coats of oil bound distemper over a coat of alkali resistant Primer paint. complete all as specified and as directed by Engr-in-charge

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed by Engr-in-charge

Material and labour for prepration of new plastered surfaces of Ceiling and applying three coats of white wash on Ceiling complete all as specified and as directed by Engr-in-charge

Demolition of Brickwork or stone/ boulder masonary ,built in cement mortar or cement lime mortar complete all as specified and as directed by Engr-in-charge.

Material and labour for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and as directed by Engr-in-charge

Taking down rolling shutter, hood cover and guide channels etc complete width of rolling shutter upto 3metre, including complete servicing, greasing, oiling and strengthening of guide channels and refixing all arrangements in proper alignments for smooth functioning, complete all as specified and as directed by Engr-in-charge

M&L for Mild steel plain sheet 0.63mm thick, cut to size , made to shape of hood cover of rolling shutters , fixed in position as in repairs incl painting two coats with synthetic enamel paint over a coat of red oxide primer, fixed as in repairs, complete all as specified and as directed by Engr-in-charge

S&F as in replacement ball bearing of No 6202 suitable size for making the steel rolling shutters operational complete all as specified and directed by Engineer-in-charge

S&F as in replacement safety lever locks, mild steel with 4 lavers for rolling shutters of standard quality as approved by GE complete all as specified and as directed by Engr-in-charge

Taking down existing unserviceable tension spring of rolling shutter and provision of new tension spring of approved quality, fixed as in repairs, complete all as specified and as directed by Engr-in-charge

Dismantling floor, hearth or wall tiling incl cement mortar bedding ( but not backing) and rubbish off the premisies complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations complete all as specified and as directed by Engr-in-charge

M&L for Non-skid ceramic tiles 7 to 8mm thick (square /Rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors set jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed 15 mm thick of CM (1:6) complete all as specified and as directed by Engr-in-charge

M&L for Non Skid ceramic coloured tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc laid over and including 15mm thick screed bed or bedding layer of CM (1:4), set & jointed in neat cement slurry & pointed in white or coloured cement to match all as specified and directed by Engr-in Charge..

M&L for Non Skid ceramic coloured tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, laid over and including 10mm thick rendering in CM (1:3) on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade all as specified and directed by Engr-in Charge.

M&L for Vitrified tiles Light shade 10 mm thick (square/rectangular) polished , area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including screed bed or bedding layer of mortar (1:4) 15 mm thick complete all as specified and as directed by Engr-in-charge

M&L for Vitrified tiles Light shade 10 mm thick (square/rectangular) polished , area of each tiles not exceeding 0.36 sqm, as in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10 mm thick CM 1:3. complete all as specified and directed by Engineer-in-Charge.

M&L for Designer Glazed coloured ceramic tiles in vertical surface (dado/skirting) 7mm thick of size 450x300mm set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10 mm thick CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar complete all as specified and as directed by Engr-in-charge

M&L for Granite stone slab (of any type) 18 to 20mm thick machine cut, work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and tabil top for fixing wash basin and flooring bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types light shade over 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge

Demolition of cement concrete (un-reinforced) in ground floor and paving thickness not exc. 15cm (below or above ground level) complete all as specified and as directed by Engr-in-charge

M&L for 50mm thick PCC 1:2:4 type B-1 (20mm graded aggregate) as in repair of chajjas, suspended slab etc, including necessary formwork complete all as specified as directed by Enge-in-Charge.

M&L for 75 mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed by Engr-in-charge

S&F of anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling incl 2mm dia GI wire for hangers where ever required complete all as specified and directed by Engineer in Charge.

M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed by Engineer in Charge.

Taking down Chowkhats or frames of any description not exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed by Engr-in-charge

Taking down chowkats/ frames & shutters without taking off shutters from the frame, size of opening exc. 1.50 sqm but not exc 4 sqm each complete all as specified and as directed by Engr-in-charge

Taking down shuttter of any description exc 1 sqm but not exc 2 sqm each complete all as specified and as directed by Engr-in-charge

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and as directed by Engr-in-charge

S&F Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg complete all as specified and as directed by Engr-in-charge

S&F Factory made solid PVC Moulded Door shutter with particle board core, 28 to 30mm thick (stiles), wtih 2,4,or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification & drawing and directed by Engr-in-Charge.

S&F of powder coated anodised alluminium frame for doors, windows, ventilators with one or more rebates includingAluminium beading, rubber bead, Tension rods joining cleat for fixing etc, complete all as specified and as directed by Engr-in-charge

S&F of powder coated anodised aluminium door shutters, alluminium sections weighing .55 kg/M including necessary joining cleats , glazing clips, rubber neoprene packing, handles 2 Nos in each door , 3 Nos hinges, 2 Nos tower bolts, anodised aluminium snap beading screws etc, complete all as specified and as directed by Engr-in-charge

S&F in repairs aluminium powder coated window/door grills , mesh size 50mm x50mm thickness 3.8mm complete all as specified and as directed by Engr-in-charge

S&F anodised aluminium window and ventilator shutters, side hung type with out sash bars, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100 mm long (2 No) suitable handle (1 No) with powder coating of any colour (thickness of powder coating not less than 50 micron) complete all as specified and as directed by Engr-in-charge

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed echanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

M&L 12 mm thick both sides prelaminated Particle board, exterior grade, fixed with screws to frame work in cup board shutters, partitions, shelves etc. complete all as specified and as directed by Engr-in-charge

S&F 5.5 mm thick tinted glass ordinary quality and glazing with oil putty or with wooden/ alluminium shutter (supplied alongwith shutter) exc 0.50 sqm each complete all as specified and as directed by Engr-in-charge

S&F Pressed steel frames for doors with single rebates including necessary fixing lugs,hinges, lock strike plate, etc complete all as specified and directed of size 105 X 60mm complete all as specified and as directed by Engr-in-charge

S&F factory made Single Extruded WPC (wood polymer composite) solid plain flush door shutter of size 35mm th comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and Natural Fibers (Wood Powder /Rice Husk / Wheat Husk) and Non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N1100 (Edge), Minimum compressive strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk ss screws, complete all as specified and directed by Engr-in-Charge. (Note : stainless steel butt hinges and necessary stainless steel screws shall be paid separately.

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as filled in pressed steel foor frames etc complete all as specified and as directed by Engr-in-charge

Supply and fixing IInd class hard wood (Hollock) 35mm thick plain framed, factory made panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (part – I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engr-in-charge

Supply and fixing glazed and skelton shutter IInd class hard wood 35mm thick,open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing including S&F Stainles wire cloth of dia 1.14mm and avg aperture width 0.36mm and Rate tail type spring 200mm complete all as specified and as directed by Engr-in-charge

S&F 150 Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-charge

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and as directed by Engr-in-charge

S&F 150mm Aluminium handles, cast type anodised complete all as specified and as directed by Engr-in-charge

S&F floor door stopper of size 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring ficed in floors complete all as specified and as directed by Engr-in-charge

S&F in repairs floor door stopper of size 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring ficed in floors complete all as specified and as directed by Engr-in-charge

S&F in repair pivot hinges suitable for aluminium door shutters, complete all as specified and directed.

S&F 12mm thick prelaminated particle board interior grade prelaminated on one side with decorative choice lamination and with balancing white on the other side, fixed to aluminium frame work as in panel, etc., fixed as in repairs, complete all as specified and directed.

S&F in repairs mortice lock verticle type size 100 mm, 4 levers for Aluminium doors of MS complete with handle as per sample kept in AGE office make Godrej/Harrison/Plaza complete all as directed and directed by Engineer in charge.

Mild steel peg stays, 300mm long , suitable for steel windows fixed with necessary nut, bolt and washers as in repair complete all as specified and directed.

M&L applying Two coats of Synthetic enamel paint over a coat of pink primer including prepration of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and as directed by Engr-in-charge

Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete all as specified and as directed by Engr-in-charge

Supplying and fixing sheet glass 3mm thick ordinary quality and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 Sqm in each pane complete all as specified and as directed by Engr-in-charge

S&F in repairs 5.5 mm thick tinted glass ordinary quality and glazing with oil putty or with wooden/ alluminium shutter exc 0.50 sqm each complete all as specified and as directed by Engr-in-charge

S&F 4 mm thick sheet glass, ordinary quality, fixied with necessary glazing clips, in squares exceeding 0.5 SqM in each pane, fixed as in repairs, complete all as specified and as directed.

S&F factory made Single Extruded WPC (wood polymer composite) solid decorative type flush door shutter of size 35mm th comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and Natural Fibers (Wood Powder /Rice Husk / Wheat Husk) and Non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N1100 (Edge), Minimum compressive strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design posted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk ss screws, complete all as specified and directed by Engr-in-Charge. (Note : stainless steel butt hinges and necessary stainless steel screws shall be paid separately.

Supply and fixing as in repairs galvanised stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tack or galvanised wire staple complete all as specified and as directed by Engr-in-charge

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and as directed by Engineer-in-charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100mm (single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete including PCC Type B1 1:2:4 (using 20 mm graded granite stone aggregate) for repair of hold fasts and similar works as per specified drawings as directed by the Engr-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

All as per Item No 66 but of frame size 45 x 70mm (single rebate)

S&F Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels , commercial type on both sides, fixed to chowkhats all as specified and directed.

M&L for Powder coated Aluminium windows of three tracks outer frame top, side sections, bottom frame(track) with guide track of size 92.5x31x1.50mm with sliding window shutters two nos with glass and one no with wire mesh(total 3 nos shutter) frame top and side bottom section with wheel track and inner locking section of size 40X18X1.5mm inculding glass 4 mm thick and aluminium wire cloth, 0.45mm nominal dia wire and average width of aperture 1.40mm complete all as specfied and dierected by Engg-in-Charge

Taking down and refixing aluminium joinery area exc 1 Sqm n exc 3 sqm after making serviceable including removing of rubber seal, beadings and fixing new rubber beading & aluminium beading and replacing unserviceable part e.g. glass pane , floor door stopper, floor spring, door closer, pivot hinges etc glass pane floor door stopper , door closure, door spring & pivot hinges should be measured and paid separately

Dismantiling boarding of any description including hardware fittings, fixed in any position with nails etc complete all as specified and directed by Engineer in Charge.

S&F 18mm thick PVC ply of plain colour fixed with screws, solvent cement / adhesive to make cabinet and bottom and shelves inside the cabinets, complete all as specified and directed by Engineer in Charge.

Material and labour 15 mm dia tubes medium grade galvanised with all fitting and fixed to walls and ceilings or laid in floors including taking down for cleaning and removal to store etc complete all as specified and as directed by Engr-in-charge

Material and labour 20 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down and cleaning for removal to store etc complete all as specified and as directed by Engr-in-charge

S & F in repairs Vitreous China Squatting pan 'orissa pattern size 580x440 white with integral foot rests with front or back inlet including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete complete including making good to floor complete all as specified and as directed by Engr-in-charge

S&F 18mm thick PVC ply of one side prelam/rigidlam and other side balancing laminate colour to make kitchen cabinet shutter/drawer front shutters complete as per specified and as directed by Engr-in-Charge.

S&F Vitreous china wash down water closet pan (Pedestal pattern), white (EWC) and fixed in repairs excluding flush pipe and flushing cystren including concrete complete including making good to floor complete all as specified and as directed by Engr-in-charge

Material and labour Flush pipe of Polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and as directed by Engr-in-charge

S&F in repairs plastic water closet seat cover white close pattern with flat bottom and cover complete all as specified and as directed by Engr-in-charge

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engr-in-charge

S&F in repair 10 Liters capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and flush pipe of polyetylene of low or high density or PVC 32 mm dia connections pipe complete all as specified and as directed by Engr-in-charge

S&F in repairs vitreous china WHB white flat back size 550 x 400 mm including brackets, 32 mm dia waste fittings brass CP for WHB with long shank screwed and fly nuts , flags and bedded in red lead cement and outer end fixed complete all as specified and as directed by Engineer-in-charge.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and as directed by Engineer-in-charge.

S&Fin repairs 15mm dia Pillar taps fancy type cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flu-nuts screwed for iron pipe complete all as specified and as directed by Engr-in-charge

S&F in repairs 15 mm bore Stop Valve fancy type chromium plated with long shank and cup (concealed type) ,cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed in repairs complete all as specified and as directed by Engr-in-charge

S&F in repairs 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge

S&F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engr-in-charge

S&F Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engr-in-charge

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 20 mm bore ball brass valve and with union (Two Nos each), fittings including dismantling of old water tanks and removal from site complete all as specified and as directed by Engr-in-charge

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 20 mm bore ball brass valve and with union (Two Nos each) , fittings including dismantling of old water tanks and removal from site complete all as specified and as directed by Engr-in-charge

S&F in repairs 20mm Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed by Engr-in-charge

S&F 20mm Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed by Engr-in-charge

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-charge

Disconnecting existing tanks of capacity exc 250 ltr but n.exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position all as specified and directed by Engineer-in-charge.

Disconnecting existing tanks of capacity exc 500 ltr but n.exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position all as specified and directed by Engineer-in-charge.

S&F 5mm thick PVC ply of plain white colour fixed with screws, solvent cement / adhesive to make kitchen cabinet back covering and pull out drawer base complete as per specified and as directed by Engr-in-Charge.

S&F 20mm wide & 1mm thick PVC edge bedding of PVC pested on edges with suitable adhesive, complete as per specified and as directed by Engr-in-Charge.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings any gauge, thickness and in any position including Nainital or similar pattern roof coverings, complete all as specified and directed by Engineer in charge.

Welding in repairs n. exc 2.5cm in length, thickness of metal to be welded not exceeding 6 mm complete all as specified and directed by Engineer in Charge.

Easing & adjusting of Shutters of any description exc 1 sq. m and n exc 2sqm each door/windows/cup board shutters of any description for easy closing/opening tightening of hinges of changing the position of hinges adjustment of tower bolts, sliding bolts complete all as specified and as directed by Engineer-in-Charge.

S&F prepainted galvaliume aluminum zinc coating GI based corruagted steel sheet 0.45 mm thick of an olive green coloure having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/ J hooks complete all as specified and as directed by Engr-in-charge

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed as in repairs complete all as specified and as directed by Engr-in-charge

S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg of aluminium (extruded section body) and fixed complete all as specified and as directed by Engr-in-charge

S&F in repairs Harrison rails mild steel, chromium plated alloy with fixing brackets, stops, roller etc complete all as specified and as directed by Engr-in-charge

M&L for Preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide paint exposed to view surfaces complete all as specified and as directed by Engr-in-charge

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.similar work conforming to Fe.290.Gde-E-165 including dismantling of mild steel works of any description not otherwise provided for complete .all as specified and as directed by Engr-in-Charge.

Taking down old PVC wall panalling including fillets and mouldings and similar works of any description complete all as specified and as directed by Engr-in-charge

S&F Solid PVC wall lining consisting of 5 mm thick plain coloured PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing shown in SSR Part-I complete all as specified and directed .

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing shown in SSR Part-I complete all as specified and as directed by Engr-in-charge

S&F in repairs 100 mm long Aluminium handles, cast type, anodised, complete all as specified and as directed by Engr-in-charge

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and as directed by Engr-in-charge

S&F in repairs 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21 complete all as specified and as directed by Engr-in-charge

S&F 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21 complete all as specified and as directed by Engr-in-charge

S&F in repairs 150 mm long Aluminium handles, cast type, anodised, complete all as specified and as directed by Engr-in-charge

S&F in repairs 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and as directed by Engr-in-charge

S&F in repairs 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and as directed by Engr-in-charge

S&F in repair Collapsible steel gates, top hung, consisting of channels pickets, pivoted flat bars, top and bottom runners, brass handles etc erected in postion and securing runners with holdfasts and brackets including taking down collapsible steel gate of any description, complete all as specified and directed. Note : The Quote rate shall include for provision of suitable size of bed blocks in PCC 1:2:4 type B1 for securing of runners hold fasts.

S&F Steel rolling shutters, mannual operated type with ball bearings, complete all as specified in SSR Part-I, including tope cover, anchorintg rod, hasp & staple and one shop coat of primer; erected in position (thickness of sheet/ lathes 1 mm and curtain inter locking curl 75 to 85 width of each trip of each strip) and making good the disturbed surfaces of walls/pillars in cement and sand mortar 1:4 and PCC 1:2:4 type B-1 for hold fasts etc, including taking down old steel shutters complete all as specified. Note: (i) Quoted rate includes making good the disturbed surfaces as per existing finished specifications. (ii) Quoted rate includes necessary use and waste of form work, if required.

S&F of auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and directed by Engineer in Charge.

S&F of ball bearing runners 45mm telescopic channel (20 inch) full extention load capacity 50 kgs complete all as specified and directed by Engineer in Charge.

S&F of stainless steel handles 100mm size for kitchen cabinet shutters complete all as specified and directed by Engineer in Charge.

S&F of continous piano hinges stainless steel , bright finish width of flaps when open 40mm complete as per specified and as directed by Engr-in-Charge.

S&F 150mm hasp and staple safety type aluminium powder coated with mild steel pin including bolt to hinge plate and fix with screws complete as per specified and as directed by Engr-in-Charge.

S&F Magnetic catcher for cupboards complete as per specified and as directed by Engr-in-Charge.

S&F 10 mm thick and 40mm width flexible rubber beading fixed with suitable stainless steel screw alongwith washer at bottom of any type of door shutter as door-seal complete as per specified and as directed by Engr-in-Charge.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed bed or bedding 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer in Charge.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar with and including 15mm thick backing coat of cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer in Charge.

M&L for machine pressed precast concrete coloured interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade laid over and including 25mm thick sand cushion complete all as specified and directed by Engineer in Charge.

M&L for 300mmx300mm of size and 20-22mm thick coloured chequered cement concrete tiles jointed with grey cement and pigment laid in floor over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer in Charge.

M&L for PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in bands, coping, bed plate etc including weathering slightly chamfered or rounded angles including necessary form work, if any, and finishing exposed surfaces even and smooth using extra cement complete all as specified and directed by Engineer in Charge.

M/s BALDEV SINGH