Design, Fabrication and SITC of Motorized Sliding Trolley Gate including All Inclusive Comprehensive Maintenance Contract at Srinagar International Airpor

Design, Fabrication, Supply, Installation, Testing and Commissioning of Single part opening M. S. Sliding Trolley Gate having length approx. 130 Meters and 2.50 mtr. height from Finished Floor Level including Wheel Height suitable for movement on M. S. Angle Track fixed on M. S. U channels as per the enclosed specifications and drawings including carrying out required fabrication works complete as required. Horizontal Base Frame of trolley gate shall be made of MS Pipe section of Size 100mm x 100 mm of 3mm thickness & Vertical frames shall be made of MS Pipe section of size 50mm x 50mm x 5 mm with side supports of suitable size M.S. Angle / Tube & 'U' shaped clamp/frame on top for concertina coils. Items also includes painting of gate with synthetic enamel paint of approved colour & make by applying 2 or more coats and one or more coat of red oxide Primer complete etc. as required.

Design, Fabrication, Supply, Installation, Testing and Commissioning of Single part opening M. S. Sliding Trolley Gate having length approx. 110 Meters (to be fabricated in two section with movement on single track and closing length of two sections with available space is maximum 60 Mtrs) only 2.50 mtr. height from Finished Floor Level including Wheel Height suitable for movement on M. S. Angle Track fixed on M. S. U channels as per the enclosed specifications and drawings including carrying out required fabrication works complete as required. Horizontal Base Frame of trolley gate shall be made of MS Pipe section of Size 100mm x 100 mm of 3mm thickness & Vertical frames shall be made of MS Pipe section of size 50mm x 50mm x 5 mm with side supports of suitable size M.S. Angle / Tube & 'U' shaped clamp/frame on top for concertina coils. Items also includes painting of gate with synthetic enamel paint of approved colour & make by applying 2 or more coats and one or more coat of red oxide Primer complete etc. as required.

Supply, fabrication, Installation, testing & Commissioning of Wiremesh of size 35mm x 35mm of 3mm dia wire with 25mm X 25mm X 3mm M.S. Angle frame in vertical and cross sections frames throughout the above M.S Sliding Trolley Gate as per specifications including painting with synthetic enamel paint of approved colour & make by applying 2 or more coats and one or more coat of red oxide Primer etc. complete as required.

Supply, Installation, Testing & Commissioning of suitable size (not exceeding 300mm) M. S. wheels set( 2 nos. wheels per set) with robust shaft and blocks for less noise operation alongwith pillow block bearing units of reputed make and all associated accessories, works and painting etc. complete as required.

Supply & Fixing MS angle of size 50mm X 50mm X 6mm in MS U channel of size 100mm X 50mm X 5mm including fixing of track on exisitng surface & making good as per site requirement complete etc as required.

Supply, Installation, Testing and Commissioning of suitable dead end barrier at the end of track of trolley gate with MS channel of size, 100mm X 50mm X 5mm and cross arm of angle iron of size 45mm x 45mm with thickness of 4mm i/c welding etc. as required as per design / drawing.

Design, Supply, Installation Testing and Commissioning of outdoor type (IP-65) PLC based automation system with remote control for operation of sliding trolley gate length of 130 Mtrs having approx. weight upto 10000 kg as per enclosed particular specifications . The power drive shall be suitable for operation on single / 3 phase power supply system (230/415 + 10 % volts) and suitable to drive the required load smoothly complete as reuired as per enclosed particular specifications. Job also includes starter panel with safety devices / Relays , foundation/ Frame work for installation of motor , provision of Two no. LED flashing light with buzzer over the gate etc as required . Provision of radio receiver for auto diagnosis of all safety controls ‐ 1 Nos. and Radio transmitter (Remote control unit) (433.92 MHz/30.9 MHz) ‐ 2 nos. for remote operation complete etc as required. Also supply and fixing radium reflector on GATE written as "STOP" with suitable nos ( not less than 4 nos) and Sizes of font not less than 150mm are covered in this item .

Design, Supply, Installation Testing and Commissioning of outdoor type (IP-65) PLC based automation system with remote control for operation of sliding trolley gate length of 110 Mtrs having approx. weight upto 10000 kg as per enclosed particular specifications . The power drive shall be suitable for operation on single / 3 phase power supply system (230/415 + 10 % volts) and suitable to drive the required load smoothly complete as reuired as per enclosed particular specifications. Job also includes starter panel with safety devices / Relays , foundation/ Frame work for installation of motor , provision of Two no. LED flashing light with buzzer over the gate etc as required . Provision of radio receiver for auto diagnosis of all safety controls ‐ 1 Nos. and Radio transmitter (Remote control unit) (433.92 MHz/30.9 MHz) ‐ 2 nos. for remote operation complete etc as required. Also supply and fixing radium reflector on GATE written as "STOP" with suitable nos ( not less than 4 nos) and Sizes of font not less than 150mm are covered in this item .

Design, SITC of Cable tray system as for 130m long trolley gate as per site requirement.