Providing Fixing and Repairing of various signboards and Thermoplastic Paint on road under R3 Sub Division

Providing and fixing 3mm thick & 300mm wideACP backed flexible prismatic (‘AFP’) sheeting consisting of Yellow colored chevron flexible prismatic sheeting with non-metallic prismatic lens as retro reflective aliments and conforming to ASTM D4956-09 Type IV specification value for rebound able sheeting. AFP sheeting shall have screen printed arrow/slant line pattern in green color on top & shall not crack when tested for flexibility as per Section S2.2.2 of ASTM D 4956-09. The AFP sheeting shall be fixed with riveted/ screwing after drilling holes in the existing sheet & wall with PVC guttties. and shall be extremely resistant to peel-off & shall confirm to IRC Accreditation no. IRC 24(12)/(2010 ACC-70 dt. 14.07.2010 (For application on parapet walls, traffic Island, Serious Bends, Roundabout, Narrow Bridge, Electric pole, Gap in Median, Tree, Flower etc. complete in all respects and to be entire specification of Engineer—in charge.

Providing and fixing dual- directional dielinator made out of 16gauge M.S. rectangular pipe of size 25x68mm and of length 750mm. Pipe funished with deluxe multi surface paint two or more coate. Head made out of ABS plastic rectangular moulded with flat face provided with High intensity prismatick reflectors of colour (white/yellow /red) of size 100x125mm with additional 2 reflective strips of 25mm wide Embedded in CC 1:2:4 of bock size of 9" x9" x 12" complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing of single legged mandatory sign consisting of 600mm dia and 450mm dia circular two board of ACP sheet 3mm thick as main plate and definition plate of size 600 x 230mm of ACP sheet fixed on 25x25x3mm angle iron frame back side with POP rivets and numerals with high intensity micro prismatic sheet grade type XI inlay and printing material on main and definition plate and fixing the same on MS angle 50x50x5mm 3.16 meter high with anchorage piece 9” long including painting of angle iron with two coats of synthetic enamel paint over one coat of primer and embedding the same in C.C. 1:2:4 of block of size 300x300x450mm complete in all respects and to the entire satisfaction of the Engineer-in-charge.

Manufacturing ,supplying and fixing retro reflective Cautionary sign boards consisting of 600 mm Dia sign boards and definition plate of Size 600x230mm made up of 3mm thick ACP sheet,rivted with 25x25x3mm angle iron frame, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other color combination including subject matter, message ,symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and welding the same with 3660mm high vertical post of M.S. angles of size 50x50x5 mm welded with hold fast of same size 225 mm long at the bottom end to be embedded in ground with cement concrete 1:2:4 block of size 300 x 300 x 450mm. The plate is to be processed by stove enamel paint of approved brand and painting white and black color alternate bands of 300mm long over one coat of priming coat to vertical post and steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat, complete in all respects and to be entire specification of Engineer—in charge

Providing & Fixing of Factory made Fine Finished Cylindrical Bollard 150mm dia Fiber Reinforced Plastic moulds of size 950 high over ground level and 300mm below G.L. made with M:35 mix concrete design using 1250mm long 4 nos. 10mm dia TMT steel bars, 6mm dia stirrups @ 150mm c/c consisting 2 cuts of 75 mm high at top for retro reflector sheet type-IV, fiber reinforcement plastic moulds fixed in ground with C.C. 1:2:4 block of size 300x300x300 with base of C.C.1:5:10 block of size 300x300x100mm complete in all respect as per drawing / sketch and to to the entire satisfaction of Engineer-in-charge.

Providing and fixing of Raised Pavement markers (Cat eyes) of make 3m series/ Avery Denninson 80/C-80 confirmaing to SDTM D4280 type H with micro prismatic lens and both sides with 13 Sq cum retro-reflective surface area in each lens, having two no. 3cm shanks and fixing the same with suitable epoxy after cutting the road surface for embebbing shanks complete in all respects and to the entire saticfaction of the Engineer in charge.

Providing and fixing of Speed imit board of Size 1620 x 920mm made out of 3mm thick ACP Sheet fabricated with fram of M.S. rectangular pipe of 75 x 40 mm of 3mm thick having three numbers pipe In horizontal and two pipes in vertical position. The ACP sheet shall be fixed with aluminum alloy sheet rivets at suitable intervals on both sides of frame. The front side of board shall have retro reflective micro prismatic sheet type IV (HIP) and printed overlay to be fixed on reflective sheet. The support frame of M.S. rectangular pipe 75 x 40mm having 2100mm clear hight from ground to the bottom of board and 600mm in ground to be emebedded in C.C. 1:2:4 including painting of two or more coats of epoxy paint including priming coat and preparation of surface complete in all respect and to the entire satishfaction of Engineer-in-charge.

Providing and applying 2.5mm (minimum) thick thermoplastic road marking paint for edge line, central line, stop line, segregation line, zebra crossing, stamping, arrow marking, Rumble strip, any other pavement markings of required size or shape. The thermoplastic material should be homogeneously composed of pigment, hot resin and glass reflectorising beads @0.250 Kg/Sqm. The gradation of glass beads must be as per table 800.4 and properties of material should be as per table 800.3 of MORT&H specification (5th revision). The work should be complete as per MORT&H specification clause 803.4 complete in all respects and to the entire satisfaction of Engineer-in-charge. N.S.

Providing and applying 5mm (minimum) thick thermoplastic road marking paint for edge line, central line, stop line, segregation line, zebra crossing, stamping, arrow marking, Rumble strip, any other pavement markings of required size or shape. The thermoplastic material should be homogeneously composed of pigment, hot resin and glass reflectorising beads @0.250 Kg/Sqm. The gradation of glass beads must be as per table 800.4 and properties of material should be as per table 800.3 of MORT&H specification (5th revision). The work should be complete as per MORT&H specification clause 803.4 complete in all respects and to the entire satisfaction of Engineer-in-charge. N.S.

Providing and applying 15mm (minimum) thick thermoplastic road marking paint for edge line, central line, stop line, segregation line, zebra crossing, stamping, arrow marking, Rumble strip, any other pavement markings of required size or shape. The thermoplastic material should be homogeneously composed of pigment, hot resin and glass reflectorising beads @0.250 Kg/Sqm. The gradation of glass beads must be as per table 800.4 and properties of material should be as per table 800.3 of MORT&H specification (5th revision). The work should be complete as per MORT&H specification clause 803.4 complete in all respects and to the entire satisfaction of Engineer-in-charge. N.S.