SPECIAL REPAIR TO BLDG NO P-7 AND P-8 (SF MD ACCN JCOs/OR) AT JN ROAD AT AGE B/R II UNDER GE KAMPTEE

Dismantling of asbestos cement (Corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering.complete all as specified and as directed.

M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet of on colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw complete all as per manufacturer instructions.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as spd and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc confirming to Fe 410-W (Gde-E-250) quality A.complete all as specified and directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets,complete all as specified and directed.

M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted including GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx15mmx0.30mm, cross tee shall be 32mmx15mmx0.30mm thick with black lining in mid portion and wall angle shall be 24mmx24mmx0.30mm thick complete all as specified and directed.

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed.

S&F Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one coat of priming complete.

Taking down door / window frame with shutter (without taking of shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

S & F powder coating aluminium frame for doors, windows , ventilators with one or more rebates incl joining cleat for fixing etc. complete all as spd. (thickness or powder coating not less than 50 micron)

S&F powder coating aluminium window / ventilator shutters, sliding type, slides of two/three/four track without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately

Material & labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material & labour for preparation of old wooden surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new untreated surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified.

Hacking out old broken glass (any thickness size and quality and description) from wooden/steel/aluminium frames glazed with putty or fixed with beads etc complete all as specified and directed.

S&F 4.8 mm thick glass, ordinary quality and glazing with oil putty/wooden beads in square exceeding 0.5 square metre in each pane complete.

Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for coloured joints free non skid ceramic tiles, 6 to7 mm thick, edgeless , area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed.

Material & labour for glazed ceramic coloured tiles 300mm x 450mm, on vertical surface such as skirtings/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm thick wood grain printed PVC sheet used instead of Plain colour PVC sheet reinforced with ms square tube & edges will be painted tomatch with printed sheet complete all as spd and directed.

Material & labour for Rendering 15 mm thick on brick or concrete surfaces in CM 1:4 external wall using water proofing liquid compound as per manufacturer instructions, and finished fair and even complete all specified and directed.(WPC shall be measured and paid separately.)

M & L for prepartion of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Primer over a coats of wall care putty complete all as specified and directed.

M & L complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means and appying two coat of acrylic distemper over a coat primer over wall putty through mechanical applicator incl scaffolding etc complete all as specified and directed.

M&L for preparion of new plastered surfaces on wall including brooming down or steel wire brushing ,scraping down moulds , washing down and applying two coats of acrylic emulsion weather proof paint apex of Asian 1st quality over a coat of acrylic primer over wall putty complete all as specified and directed.

M & L for Dubbing out average 15mm thick on irregular face of walls cement plaster in CM 1:4 (when specifically ordered in writing)

Taking up or down steel tubing 15 mm bore and connection complete all as specified.

Taking up or down steel tubing 20 mm bore and connection complete all as specified.

S&F in repair PVC (SWR) gully trap 125/110 mm , setting and jointing with solvent cement complete all as specified and directed.

S&F in repair CP grating doom with waste hole of size 125mm dia complete all as specifed and directed complete all as specifed and directed.

S & F in repair 75 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.

S&F in repair PVC (SWR) Bends any radius for 110 mm bore complete all as specified and directed.

-ditto- but for 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius provided with access door of 110mm dia complete all as spd and directed.

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as spd and directed.

S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 110mm bore with access door complete all as spd and directed.

S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 75 mm bore with access door complete all as spd and directed.

S&F PVC (SWR) vent cowl of 110 mm dia complete all as spd and directed.

Dismantling water tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed

S & F 1000 ltrs capacity Rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed.

S&F PVC bedding 18/19 mm width 0.8mm thick fixed with pvc edge bending tape with necessary glue complete all as spd & directed.

All as per item No 46 here-in-above but half brick wall in CM 1:4.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed.

M & L Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed.

S&F in repair for curtain rails, Stainless steel, chromium plated with fixing brackets, stops complete all as spd and directed.rollers etc

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Form work to chullah hoods, chajjas, troughs and similar items including edges and simillar work complete all as specified and directed.

S&F in repairs cabinet mirror 400x 500 mm for bathrooms complete all as specified and directed.

M&L for providing

RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in chajja etc complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending pirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F in repair corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete /sub base complete all as specified and directed.

Material & labour 75 mm th PCC (1:3:6) Type C2 (using 40 mm graded stone aggregate), as in plinth protection and finishing surfaces even & smooth without using extra cement including mastic filling in the joint complete all as specified and directed.

M & L for Treatment of soil under existing floors using emulsion @ one litre per hole , 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floors, complete all as spd and directed.

M & L for Post Construction ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 lite/hole by drilling 6 mm dia holes at a ownward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as spd and directed.

M & L for PCC 1:2:4, Type B0 (using 12.5 mm graded stone aggregate) 25 mm thick as in sunken floor complete all as specified and directed.

M&L for PCC type E2 1:5:10 (40 mm graded aggreate) in foundation, filling and mass concrete complete all as specified and directed

Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K Supremo or approved equivalent, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTM C 1202, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. applying SmartCare Damp Block 2K Suprema in two coat 2 kg/sqmt consumption, The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing , etc, complete as per manufacturers specifications.

M&L 50mm bore GI tubing medium grade laid on sunken floor as on Spot Pipe complete all as specified and directed by Engineer-in-charge.

Dismantling boarding, any description, fixed in any position with Screw ,complete all as specified and directed.

S&F in repair Continuous (piano) hinges, SS, bright finish with 30 mm width of flaps (When open), complete all as specified and directed.

S&F in repairs CP soap dish with glass complete all accessories.

M/L RCC 1:1.5:3 type A1 using 20mm graded aggregate as in Precast kitchen shelves and similar articles and setting in cement mortar 1:4 complete with joints to match (01 Nos holes for gas pipe) complete all as directed.

M & L for Post Construction ATT along with external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc in apron, etc complete all as spd and directed.

S&F magnetic catcher of size 20mmx50mm suitable for cup board shutters complete all as specified and as directed.

S&F 6 mm thick teak wood lipping on block board fixed with nails complete all as spd & directed.

S & F in repairs 40 mm dia, cupboard Knobs fixed with nut, screws and washer of mild steel, bright finished complete all as spd and directed.

S&F stainless steel cabinet /drawer handle (Silver) including all accessories complete all as specified and as directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches exc 1.5m in deepth and 3.00m in width and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n exc. 25cm in soft/loose soil complete all as specified and directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Material & labour for brick work with sub class B old size burnt bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specifie and directed

M & L preparation of new plastered surfaces of wall and applying three coats of white wash complete all as spd.

Demolition of cement concrete bed in hauching and breaking up drain pipes 150mm SGSW set in cement mortar of the following dia complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in bed to drain pipe 150mm bore including packing under and hauching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L for 150 mm bore SGSW drain pipe grade A laid in trenches and jointed in CM 1:1 complete all as specified and directed.

M&L for providing precast RCC cover slabs 1:2:4 type B1 (20 mm graded aggregate) set in cement mortar 1:4 as in (for drain, man holes,chajja, platform etc) and similar articles with plain faces and each cover slab covered in 6 Nos loop holes complete all as specified and directed

S&F zero degree concealed hinge complete all as spd & directed.

Each Job

M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specified and directed.

Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to macth with existing surfaces including white washing/colour washing/ distempering to match with existing wall/floor/ceiling finishes, complete all as specified and directed.

Taking down sheet metal enclosure, DB & MCBs main switch etc and making good distrubed sufaces to match with exisiting surfaces, complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces, complete all as specified and directed.

Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specifed and directed. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

M&L for brick work with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long.

M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to is 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment finished with coloured rubber finish on top finished over sand dust cushion of 30 mm thick complete all as specified and directed. Note : Sand cushion will be measured and paid separately

Ditto all as per item No 160 but one light point controlled by two, two way switch complete all as specified and directed.

Ditto all as per item No 160 above but One ceiling/exhaust fan point controlled by oneway switch and regulator, complete all as specified and directed.

Ditto all as per item No 160 above but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and directed.

M& L sand filling under cushion of paver blocks complete all as specified and directed

M&L for providing cement concrete1:3:6 type C1 (20mm graded aggregate) as in copings,plinth courses including weathering,slightly rounded or chamfered angles and throating on edges complete all as specified and directed.

Material and labour for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm, complete all as specified and directed. PVC Conduit.Note:- Three run of 4.0 sqmm and one run conduit will be measured as one unit.

Supply and fixing for switch modular type single pole one way 6 amp 1 module 230 volts AC suitable for modular switch boxes, complete all as specified and directed.

S & F switch modular 2 way single pole 6 Amp 1 module complete all as specified and directed.

Supply and fixing for socket modular type single pole one way 6 amp 2 module 3 pin 230 volts AC suitable for modular switchboxes, complete all as specified and directed.

Supply and fixing ceiling rose, surface type, three terminals 5 amps, complete all as specified and directed.

Supply and fixing Electric Bell Ding dong AC 230 volts, single phase, complete all as specified and directed.

Supply and fixing for switch modular type single pole one way 6/16 amp 3 pin 230 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply and fixing for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 230 volts AC suitable for modular switch boxes, complete all as specified and directed

Supply and fixing bell push switch modular type single pole one way 5 amp 230 volts, complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed.

Supply and fixing 0-4 step -2 module modular type electronic regulators for ceiling fan 1200/1400 mm sweep, 230 volts, 120 watts single pole complete all as specified and directed.

Supplying and fixing 20 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 230 V , 50 Hz, CCT 6500K, THD<10% connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed.

Supply and fixing LED light fitting 10W bulk head luminaries made of diecast alumnium housing with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable suitable size of 230V, 50Hz,

THD<10%, lumen 100 lm /watt, 6500 K complete all as specified and directed.

Supply and fix building security light LED 25 W with Lumen O/P 2500 with driver with rated voltage 230 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc. complete all as specified and directed.

Supply and fixing Exhaust fan metallic body 300 mm sweep, 1400 RPM single phase, 3 blades 230 Volts, 50Hz, with nut and bolts, washers copper wound etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, and making holes for exhaust fan in wall complete all as specified and directed. Note :- Wire mesh shall be fixed outside the opening to prevent insect/flies at no extra cost

Supply and fix MCB single pole & neutral 240 volt 32 amps 10 KA, "C" curve complete all as specified and directed.

Supply and fixing Exhaust fan PVC body 250 mm sweep, 1200 RPM single phase, 230 Volts, 50Hz, 5 blades with nut and bolts, washers etc., copper wound and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, and making holes in window frame of suitable size complete all as specified and directed.

Supply and fixing ceiling fans complete with min 3 blades, down rods, accessories, 230 V, 1200 mm sweep . copper wound Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), with remote control THD<10%, Max temp rise 75° C completeall as specified and directed.

Supply and fix electric water heater, storage type steel body with steel inner tank and heating element upto 2 KW capacity 25 litre, with energy saving PUF insulation BEE 5 Star, temp range from 25 to 75 °C and working upto 0.8 bar pressure rated 230V, 50Hz complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc

Supply and fix MCB Triple pole & neutral 415 volt 63 10 KA, "C" curve complete all as specified and directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 12 way with 100 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed.

Earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protec-tion pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

Supply and fix Energy meter enclosure made of bakelite material with fixing of meter and testing, complete all as specified and directed. Make:-Hensel/ Ship/ HPL