REPAIR/MAINT OF INTERNAL ELECTRIFICATION LIGHT FITTINGS CEILING FANS EXHAUST FANS GEYSERS AND PERIODICAL SERVICES TO OTM MD ACCN AND OTHER CONNECTED E M WORKS AT RMS DHOLPUR UNDER GE BHARATPUR

Amount

Disconnecting & taking down the U/S ceiling fan of 1200mm/ 1400 mm sweep, cleaning the dust etc with air pressure, cotton cloth & brush, cleaning with kerosine oil, lubricating greasing, oiling, cleaning to winding including supply and replacement of nuts, bolts, hanging clamp, rubber seal, split pin,capacitor connector and copper cable PVC size 3 core 0.5 Sqmm upto required length from ceiling rose to connector of ceiling fan including hanging, connecting up and testing complete all as specified . Note : Parts/components replaced other than mentioned above will be measured and paid separately under respective items. (ii) After completion of work all fans/geysers shall be tested in E/M store yard to the entire satisfaction of Engr-in-charge.

M&L for painting of ceiling fan of any sweep complete with blades, down rod etc with synthetic enamel paint of approved colour by spraying including filling cavaties with filler, preparation of surfaces cleaning all dust etc and writing of MES No of size not exc 5cm thick using black enamelled paint complete all as specified.

M&L for cutting and dismantling the existing winding of ceiling fan of 1200mm sweep and rewinding with super enamelled copper winding wire of suitable gauge including varnishing, lubricating, greasing, oiling and testing complete,including replacing of hanging clamp/pin complete all as specified.

Supply and replacement of ceiling fan blade suitable for ceiling fan 1200mm sweep (set of three blades) as per existing colour complete.

Supply and replacement of down rod 50cm long 15mm internal dia heavy duty duly painted including hanging clamp, rubber ring, nut and bolts complete suitable for ceiling fan of 1200/1400mm sweep.including necessary hole complete all as specified.

Supply and replacement of canopy suitable for ceiling fan of 1200/1400mm sweep.

Supply and replacement Capacitor 2.5/3 mfd, oil filled, 400V AC, 50 HZ, 850C ISI marked Make : Asian/Unistar/Usha/Amcap

Supply and replacement ball bearing suitable for existing ceiling fan of size 1200mm/1400mm sweep complete all as specified.

Supply and fixing in replacement PCB circuit for BLDC fan of 1200mm sweep as per existing make complete all as specified.

Supply only remote along with two batteries suitable for existing BLDC fans complete all as specified.

M&L for cutting and dismantling the existing winding of exhaust fan 300mm sweep with super enamelled copper winding wire of suitable gauge including varnishing, lubricating, greasing oiling testing complete including gun bush sutiable for exhaust fan complete all as specified.

All as per ser item No 11 above but for exhaust fan 380/450mm sweep complete all as specified.

Supply and replacement of following parts/components suitable for exhaust fan 300/380/450mm sweep :-

(a) Capacitor 4 mfd, oil filled, 400V AC, 50 HZ, 850C ISI marked Make : Asian/Unistar/Usha.

(b) Fan blade set (set of three) for exhaust fan of 300mm sweep.

(c) Fan blade set (set of three) for exhaust fan of 380/450mm sweep.

(d) S&F in replacement of Exhaust fan out side wire mesh for protection to interior all as specified and as per existing size

M&L for cutting and dismantling the existing winding of wall mounting fan 400mm sweep with super enamelled copper winding wire of suitable gauge including varnishing, lubricating, greasing oiling testing complete including gun bush complete all as specified.

S&F in replacement Heating element 1500/2000W with rubber ring clamping screws etc in geyser water storage type of capacity 25/35 ltr/50 ltr. Make : Bajaj/Venus/Theeta/Micron/Havells.

Supply and replacement following parts of the geyser water storage type 25 ltr capacity. Make : Ditz/Recold/Venus/Sidhson/ Bathwall/Bajaj.

(a) Thermostat switch adjustable type as per existing.

(b) Reset type thermal cut out.

(c) Brass inlet/outlet assembly complete without element and thermostat.

(d) Indicator bulb square type complete with necessary connection wire of red & green colour complete as per sample kept in GE's office.

(e ) Brass NRV 15mm suitable for 25/35/50 Ltrs Geyser

M&L for removing unserviceable grouted "Anchor" type bolts and nuts from the wall and S&F new "Anchor" type bolts (04 Nos of 12mm dia) including fastener grouted properly in wall to hold 25/35/50 ltr capacity water storage type geyser with and including nuts and washers and marking good the disturbed surface in cement mortar 1:3 complete all as specified.

S&F in repair PVC connection 15mm dia, 45cm long with PTMT coupling complete all as specified.

Supply and fix Cock, Bib , brass chromium plated screwed down for size 15mm dia pipe complete all as specified.

Supply and fix Cock, stop brass chromium plated screwd down for 15mm dia pipe complete all as specified.

S&F Water storage tank suitable for 35/50ltrs geyser made out of special laminated texture finished body with covering of non corrosive protection on both sides of sheet with 100% pure Salem stainless steel sheet/electro statically powder coated body made of heavy gauge CRCA sheet complete all as specified.

Taking up or down the existing unserviceable GI steel tubing and connection and S&F galvanized iron medium grade ISI marked tubing with all fittings and fixed to walls ,and ceiling or laid in floors, jointed tested complete for following sizes.

(a) 15mm. Dia

(b) 20mm. Dia

S&F in repair PVC cable 3 core copper conductor of size 2.5 Sqmm to water storage type geyser of capacity 25/35/50 ltr including taking out old cable complete all as specified.

Taking down U/S plug top and S&F new 3 pin plug top 16 amps, 230 volts, ISI marked complete all as specified.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete fittings such as switches, ceiling roses, pendents, regulators, sockets etc and making good disturbed surfaces of wall, floor & ceiling etc complete all as specified.

Taking down old U/S rusted main switch/DB of any size capacity and make.

Taking down old U/S sub main wiring of any size & make.

M&L point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in and including PVC casing and caping double locked box type with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the surface of wall/ceiling by means of PVCsleevel/dash fastners with cadmium plated screws including suitable size of PVC boards for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connected to earth dolly complete all as specified for the following :-

(a) One light point controlled by one way switch.

(c) One bell/buzzer point controlled by one push button.

(d) One 3 pin 6 Amp socket point outlet on the same board with other switches

(e) One 3 pin 6 Amp socket point outlet on the independent board

All as per item No 28 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified.

S&F socket outlet 2 in 1, 5pin, 6 Amps multi purpose flush type 230 volt complete all as specified.

S&F switch socket combination 2 in 1, 16 Amp flush type multi purpose 230 volt complete all as specified.

S&F switch piano flush button single pole one way 6 Amps 230 volt grade complete all as specified.

S&F bell push flush type 5 Amps 230 volts grade complete.

S&F in repair ceiling rose surface bakelite 50 x 40 mm three terminal ISI marked including suitable size of PVC board complete all as specified.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as specified.

M&L in repair call bell ding dong/ multi musical type 230 volts grade code No 38830 make : Anchor/Panasonic or equivelent in Legrand complete all as specified.

M&L point wiring concealed type complete including cutting chases for conduit pipes on stone masonry wall with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in pvc conduit pipes with accessories such as Tee, bend, collar, elbow, square junction box etc fixed inside the wall/ceiling by means of pvc conduit pipes and suitable accessories including suitable size of PVC boards/existing sunken box with modular boards for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly complete rate including cutting chases and finishing the wall after concealing the pipe with suitable plastering/putty/distembering etc all as specified for the following :-

(a) One light point controlled by one way switch.

(b) One ceiling fan/exhaust fan point controlled by one way switch.

(c) One 3 pin or 5 pin 6 Amp socket point outlet on the same board with other switches.

(d) One 3 pin or 5 pin 6 Amp socket point outlet on the independent board complete all as specified.

All as per item No 38 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 1.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified.

S&F in repair modular switch 1 way , 6 Amp, 1 module, as per existing model and type complete all as specified.

S&F in repair modular switch 1 way , 16Amp, 1 module, as per existing model and type complete all as specified.

S&F in repair modular socket on existing plate, 6Amp, 2/3 pin combined, 2 module as per existing type and model complete all as specified.

S&F in repair modular socket on existing plate, 6Amp/16Amp combination, 2/3 pin combined, 2 module as per existing type and model complete all as specified.

S&F modular white cover plate with frame of 3 module as per existing model and type complete all as specified.

S&F modular white cover plate with frame of 4 module as per existing model and type complete all as specified.

S&F modular white cover plate with frame of 6 module as per existing model and type complete all as specified.

S&F modular white cover plate with frame of 8 module as per existing model and type complete all as specified.

S&F modular white cover plate with frame of 12 module as per existing model and type complete all as specified.

S&F modular fan regulator 2 module SP, 240Volt complete all as specified.

S&F modular flush metal box 3 module complete all as specified.

S&F modular flush metal box 4 module complete all as specified.

S&F modular flush metal box 6 module complete all as specified.

S&F modular flush metal box 8 module complete all as specified.

S&F modular flush metal box 12 module complete all as specified.

M&L submain wiring complete with 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 4 Sqmm copper cable for earth continuity conductor(measured as one RM) in and including drawn through PVC casing capping PVC conduit/sleeves with all PVC accessories fixed on wall, floor/ceiling and making good the distrubed surface to match with existing complete all as specified.

M&L submain wiring complete with 6 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 6 Sqmm copper cable for earth continuity conductor(measured as one RM) in and including drawn through PVC casing capping PVC conduit/sleeves with all PVC accessories fixed on wall, floor/ceiling and making good the distrubed surface to match with existing complete all as specified.

M&L submain wiring complete with 10 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor four runs and two run of 10 Sqmm copper cable for earth continuity conductor(measured as one RM) in and including drawn through PVC casing capping PVC conduit/ sleeves with all PVC accessories fixed on wall, floor/ceiling and making good the distrubed surface to match with existing complete all as specified.

M&L Distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt of the following DBs :-

(a) 4 way TPN with busbar 415 volts (double door type).

(b) 12 way SPN with200 Amp rated busbar 240 volts (double door type).

(c) 8 way SPN with200 Amp rated busbar 240 volts (double door type).

(d ) 4 Way SPN with 200Amp rated busbar 240V (Double door type)

S&F MCB 240 volts 10 KA, rupturing capacity fixed in DB's of the undermentioned type and rating.

(a) MCB SP 240 volts 10-40 Amps

(b) MCB SPN 240 volts, 40 Amps

(c) MCB TPN 415 volts, 63 Amps 16 KA 4 Pole

S & F in repair LED batten 20watt suitable for 1200mm long with G-13 lamp holder T5 and T8 , housing finished in aluminium powder coating complete with all accessaries all as specified.

M&L in repair batten/angle holder insulated with back plate including suitable size of PVC round block make Anchor code No 51205 complete all as specified.

S&F in repair LED bulb 07W cool day light , in-built voltage surge protection > 3.5kV, single ph, 230V, luminous efficacy 100Lm/Watt, base B22, min 3 star rated all as specified. Make - CG or equivalent in Phillips/Havells.

S & F in repair LED light fitting mirror type with high output diffurser 2 feet, 7w/10w 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable suitable size complete all as specified.

Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid inside the pipes of sutiable sizes including clip/clamp/nut bolts as required for cable size 10 Sqmm 2 core complete all as specified.

Supply and fix in repair bulk head light 9/10 watt with surge protection, dust and water resistant hexagonal/circular shape ,operating voltage 140V to 270V, 50hz, minimum lumen output of 80lm/W ,THD less then 15% polycarbonate body CCT 6500k complete all as specified.

Material and labour for renewal of Chemical Earthing complete with copper earth plate electrode of size 60x60cmx3.15mm thick buried directly in ground (earth pit should not less than 4 mtr deep below normal ground level ) with top edge of the plate not less than 2.95 mtr deep below normal ground connected to and included copper earth strip 20mmx 3mm by means of copper bolts nuts check nuts and washer returning and filling the pits with excaviated vsoil mixing with charcoal 250 kg crystal salt 200 kg magnisiun sulphate of 100 kg and vegitable soil all around the plate up to 350 mm above from top edge of plate and balence portion filling with excaviated soil in layers not exc 25 mm thick 25 mm bore galvanised iron medium grade watering pipe up to top of plate 50mm bore galvanised iron light grade pipe for earth strip protection including all excavation earth work in any type of soil pcc 1;3;6 type c1 ....for chamber of internal size 300mmx 300mmx300mm with 120mm thick wall and 700mmx700mmx150mm thick bed concreat RCC 1:2:4 ,type B1 for precast chamber cover 50mm thick reinforced with welded steel wire fabric orxPM jali (weight not less than 4.00 kg/sqmm) ,funnel,with wire mesh complete all as specified. Note (i) Quoted rate shall be deemed to include for earth strip with protection pipe up to 7.5 M length

S&F LED luminaire 600mmx600mm, 35/36 watt, 240V AC recessed type with high efficiancy PMMA diffuser soft glare free light complete with driver ,holder, LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper condutor cases of suitable size complete all as specified.

S&F sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps, 240 volts. Make- L&T, Havells, Legrand/HPL/Orient complete all as specified.

Supply and fix of lithium based Energy Efficient Integrated solar street light of 30/32 watt ^ ,encases with monocrystalline solar PV panel of min 65-67 Wp ,lithium battery 11.1/12.8 v 24 AH with inbuilt BMS IP 65 high brightness W-LED lamp with aluminium reflector for better light distrubtion CRI>70 colour temperature 5700-6500K . microcontroller basedcharge controller cum driver automatic diming function with PIR motion sensor dusk to dawn operation sutiable to working temperature -10 to 55 C with adjustiable MS clamp sutiable for pole/wall mounting etc complete all as specified.

S & F street light GI bracket of 0.9 mtr long for building security/pole mount light made out of 40mm dia medium grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole and including Dismantling old U/S GI bracket of any size & length complete all as specified.

Supply, fixing and testing LED building security street light 35watt 230V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp and having lumen output not less then 100 lm/w new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium with 10KV surge protection complete all as specified.

Supply and fix bollard lights 1x8/10W warm white in colour as having die cast aluminium body, operating voltage 170V to 240V AC. Height of bollard should be minimum of 75cm colour temp 3000k, IP 66 rated, integrated LED light with polycarbonate diffuser. Light should have provision of fastening in ground including bolts/fasteners as required complete all as specified.

Supply and fix bollard lights 1x8/10W cool white in colour as having die cast aluminium body, operating voltage 180V to 240V AC. Height of bollard should be of 75cm colour temp 6000k, IP 65 rated, integrated LED light. Light should have provision of fastening in ground including bolts/fasteners as required complete all as specified .

Supply and fix in replacement outdoor post top lantern of 12/15watt energy saving, enviorment friendly, aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source operating voltage 180V to 240V, IP 65 rated with integrated LEDs, provision of mounting arrangement including bolts/fastener complete all as specified.

Supply and fix in replacement outdoor solar based post top lantern of 25 watt enviorment friendly, aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs, IP 65 rated with, provision of mounting arrangement dusk to dawn operation having Li battery 12.8V 12Ah including bolts/fastener complete all as specified.

Supply and fix in repair decorative wall lights / wall lamps with arrangements of mounting LED bulb i.e. having B22 base comet indoor type white in colur removable type polycarbonate/ plastic body with arrangements of wall mount/ flush mount including required screws complete all as specified.

Supply and fix in repair decorative frosted glass wall lights / wall lamps with arrangements of mounting LED bulb i.e. having B22 base indoor type chrome finish base with arrangements of wall mount/ flush mount including required screws complete all as specified.

Supply and fix LED batten tube light 18w with battery and inverter power 230V 50Hz having colour rendering index equal or more then 80 , THD less then 30%, copper wired having colour temperature 6300K, internal surge protection device upto 3kV , comprising of Li Ion battery 1nos and emrgency/power failure backup of minimum 4hours, aluminium extruded housing and polycarbonate front cover, working life should be as per LM 80 complete all as specified.

Supply, fixing, jointing and testing in replacement of ISI Marked, of approved quality, gun metal globe/gate valve with iron wheel head, both ends screwed for iron pipe of size 15mm bore complete all as specified.

Supply, fixing, jointing and testing in replacement of ISI Marked, of approved quality, gun metal globe/gate valve with iron wheel head, both ends screwed for iron pipe of size 20mm bore complete all as specified.

Supply and fixing in replacement of 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight -210gms/) complete all as specified .

Material & labour for framed work, fabricated from structural steel sections including welding, bending, cold or hot, drilling holes for bolts, in any shape or size and as indicated or directed having MS angle on top for placing the collector panels/ water tank/supporting hot water pipes /ladders for approch etc inclusive of two coats of synthetic enamel paint over a coat of red oxide primer and fixing in walls/roof etc complete all as specified. Note: Cost of taking down/dismantling is deemed to be included in quoted rates by contractor.

Servicing of complete solar flat plate collector. The detail scope of work consists of the following (i) Cleaning of solar flat plate collector with detergent and after that with coline solution and removing all type of grease/mud etc and cleaned as per direction. (ii) Cleaning of complete copper tubing system of solar flate plate collector incl necessary brazing welding if required/repair to leakage and tested as per OEM direction. (iii) Cleaning of hot water MS tank with cleaning agent and necessary gas welding/brazing if required to stope minor leakage. Note: Supply of Hose pipe clamps, gasket nut, bolt, washer etc shall be measured and paid seprately under relevent item.

Supply only of hose pipe clamps as per existing provn complete all as specified.

Supply only of flat plate collector Gasket as per matching/ existing complete all as specified.

S&F providing Glass wool insulation with cup wire mesh 100mm thick insulated covered by cladding of aluminium sheet 24 SWG on warm GI water line of 20mm size incl taking down old unserviceable material complete all as specified.

S&F in replacement of unserviceable 3KW heating element including connecting with electrical connections, complete all as specified.

S&F in replacement of unserviceable thermostat as per existing, suitable for solar geyser/conventional geyser including connecting with electrical connections, complete all as specified.

Supply and fixing in replacement of old flat plate solar collectors toughned GLASS as per matching existing type , including all fixing accessories complete all as specified.

Supply and fixing in replacement of old flat plate solar collectors frame BOX, including all fixing accessories complete all as specified.

Supply and fixing in replacement of old flat plate solar collectors copper tubes absorber, including all fixing accessories complete all as specified.

Supply and fixing in replacement of flat plate solar collectors of suitable size complete puff insulated collector accessories complete all as specified.

Supply, Installation, testing and commissioning in replacement of insulated hot water storage tank of stainless steel SS 304 tank 500 ltr 3 mm thick capacity heat exchanger type duly 100mm thick glass wool insulated covered by cladding of aluminium sheet 24 SWG including connecting all GI connections to the new SS tank with collector panels and MS stand of suitable thickness including heat exchanger water pot mounted on the top including taking out old U/S one complete all as specified. Note :- (a)The rate for taking down is deemed to fit in the quoted rate, no extra payment made on this account. (b) Any damage to the building while installing hot water storage tank should repaired in quoted amount, no extra payment made on this account.

Supply, Installation, testing and commissioning in replacement of borosilicate Glass solar vacuum tube at suitable size as per existing position complete all as specified.

M&L tripple layer rotational moulded polyethylene water storage tanks 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position with float valve all as specified in SSR Part I etc complete all as specified including dismantling existing tank.

M&L tripple layer rotational moulded polyethylene water storage tanks 500 litres (cylindrical vertical with closed top) concrete hoisted and fixed in position with float valve all as specified in SSR Part I etc complete all as specified including dismantling existing tank.

M&L for cement type B1 1:2:4 using 20mm graded stone aggregate for pre cast cement concrete block with solid block or in foundation complete all as specified.

Supply and fix in repair of damaged energy smart meter cover as per existing for protection of electrical meter complete all as specified.

M&L for preparation of old plastered or un plastered surface of walls and applying one coats of oil emulsion distemper white or tinted including all necessary arrangement for execution of work complete all as specified.

M&L for preparation of old plastered or un plastered surface on ceiling,and applying one coats of oil emulsion distemper white or tinted( including all necessary arrangement for execution of work complete all as specified.

DEMROT ELECTRICAL WORKS (BID ID -3330058)

Rajesh Mishra (BID ID -3339985)

M/S BAJRANG CONSTRUCTIONS (BID ID -3331867)