HVAC work in POD 1E 504

Amount

Supply, Installation, Testing & Commissioning of HIGH STATIC FCU unit made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, cooling coil section with aluminum finned copper tubes (tubes thickness not less than 0.5mm) , filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, belt drive package with TEFC drive motor with efficiency class IE3 or EFF1 whichever is more efficient and suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply, drain connections, stainless steel (18G) drain pan with PUF insulation.

6 TR (3000 CFM)

Providing & fixing Valve station for FCU including with connected piping and adequately supported as per specifications.

Supply & Installation of Digital Thermostat for FCU

Supply & Installation of C Class 25mm Pipe with necessary clamps, vibration isolators, fittings and Support but excluding valves, strainers, gauges etc.

Supply & Installation of Tee 50mmx50mmx25mm with necessary clamps, vibration isolators, fittings and Support.

Supply & Installation of elbow 90 25mm with necessary clamps, vibration isolators, fittings and Support.

supply & Installation of elbow 45 25mm

Supply & Installation of Socket 25mm

Supply & Installation of 2-way Valve with Strainer 25mm with necessary clamps, fittings and Support.

Supply & Installation of 25mm butterfly valve with necessary clamps, vibration isolators, fittings and Support.

Supply & Installation of 25mm Balancing valve with necessary clamps, vibration isolators, fittings and Support.

Supply & Installation thermometer

Supply & Installation of 25 mm Ball Valve with necessary clamps, vibration isolators, fittings and Support.

Providing & fixing of fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessian and finally applying 0.63mm aluminum sheet cladding complete with type3 , grade 1 roofing felt strip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect.

Shut down job including drain and refilling of water and required civil work.