Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
9 Apr 2025, 2:00 pmClosed
Single Packet
Normal Tender
No
Not Applicable
Total Value Wise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
IG
1 condition · 1 needing a document upload
Firm should have satisfactory past performance of supplying tendered items to any Railway/ Other Govt. Dept. and relevant documents i.e. copy of receipted challan, inspection certificate, R-Note, CRAC, CRN etc. in support of the same to be uploaded/ attached. If firm failed to upload/attach the said documents then, Railway reserve the right to check bidders past performance in Railways through IMMS (Vendor Performance), hence if any Firm failed to upload credential, it would be checked in IMMS (Vendor Performance) and evaluation will be done accordingly and if no credential is found so far then the offer will summarily be rejected. No back reference will be made in this regard. Purchase Order is not considered as past performance until Railway get confirmation of its successful supply.
22 conditions · 4 needing a document upload
Have you attached the past performance credentials with your offer?
FOR-Destination.
Mode of dispatch: By road on door delivery basis.
a] Tenderer must specify their offered Make/Brand and Model otherwise their offer will summarily be rejected. b] Firm should upload/attach catalogue/drawing & specification of their offered product, if any. c] Tenderer other than manufacturer should attach/upload tender specific authorization/valid dealership certificate issued by manufacturer along with their offer failing of which offer of the firm will not be considered as a valid offer and such offer will summarily be ignored. No back reference will be made in this regard. Firm should note that, if they failed to attach/upload any of the documents mentioned in Sl. No. a, b, c above (as per applicability), then their offer will not be considered as a valid offer and such offer will summarily be ignored. No back reference shall be made in this regard on either side.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
2 conditions
FOR-Destination: No deviation from the FOR-Destination stipulated in the tender is permitted.
Mode of despatch: No deviation from the Mode of despatch stipulated in the tender is permitted.
2 locations across West Bengal · 46 Numbers · 31 Set total
Submersible pump sets etc.
IG255480A
IG255480A
Open - Indigenous
Goods
West Bengal
₹0
Exempted
9 Apr 2025
28 Mar 2025
9 items · 46 Numbers · 31 Set total
Single Phase, 2 HP/ 1.50 KW submersible pump set, suitable for bore size 100 mm, Yield - 0.5 LPS, Delivery Size: 50 mm, Head: 60 Meter or above, operating voltage 1 ph. 230 V,50 Hz, with all necessar y items required for successful installation of pump, Pump should confirm to IS standard 8034/ 2002 latest. Pump should be energy efficient, and star rated. Make: Indian make IS approved. [ Warranty Period: 30 M onths after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| EF-SUPP-N-KGP, SER | West Bengal | 1.00 Numbers |
| Total | 1 Numbers | |
Three Phase DOL Starter for 3 HP Submersible Pump, 415V 50Hz AC Supply, with suitable 3 p ole Contractor, 3 pole Overload Relay and MCB. Starter also with Sheet Steel enclosure with Ammeter, Volt meter and Indicator etc. Item required for successful installation of Pump. Make: Indian make IS approved. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| EF-SUPP-N-KGP, SER | West Bengal | 7.00 Set |
| Total | 7 Set | |
Single Phase Starter for 1.5 HP Submersible Pump, 220V 50Hz AC Supply, with suitable 2 pol e Contractor, 2 pole Overload Relay, MCB and Running Capacitor and Starting Capacitor. Starter also with S heet Steel enclosure with Ammeter, Voltmeter and Indicator etc. Item required for successful installation of Pump. Make: Indian make IS approved. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| EF-SUPP-N-KGP, SER | West Bengal | 8.00 Set |
| Total | 8 Set | |
Three Phase, 3 HP/ 2.25 KW submersible pump set, suitable for bore size 150 mm, Yield - 2.5 LPS, Delivery Size: 50 mm, Head: 60 Meter or above, operating voltage 1 ph. 230 V,50 Hz, with all necessar y items required for successful installation of pump, Pump should confirm to IS standard 8034/ 2002 latest. Pump should be energy efficient, and star rated. Make: Indian make IS approved. [ Warranty Period: 30 M onths after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| EF-SUPP-N-KGP, SER | West Bengal | 6.00 Numbers |
| Total | 6 Numbers | |
Single Phase,1 HP/ 0.75 KW submersible pump set, suitable for bore size 100 mm, Yield - 0.5 LPS, Delivery Size : 32 mm, Head : 60 Meter or above, operating voltage 1 ph. 230 V,50 Hz, with all necess ary items required for successful installation of pump, Pump should confirm to IS standard 8034/ 2002 lates t. Pump should be energy efficient and star rated. Make : Indian make IS approved. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| EF-SUPP-N-KGP, SER | West Bengal | 9.00 Numbers |
| Total | 9 Numbers | |
Single Phase Starter for 2 HP Submersible Pump, 220V 50Hz AC Supply, with suitable 2 pole Contractor, 2 pole Overload Relay, MCB and Running Capacitor and Starting Capacitor. Starter also with Sh eet Steel enclosure with Ammeter, Voltmeter and Indicator etc. Item required for successful installation of P ump. Make: Indian make IS approved. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| EF-SUPP-N-KGP, SER | West Bengal | 2.00 Set |
| Total | 2 Set | |
Single Phase Starter for 1 HP Submersible Pump, 220V 50Hz AC Supply, with suitable 2 pole Contractor, 2 pole Overload Relay, MCB and Running Capacitor and Starting Capacitor. Starter also with Sh eet Steel enclosure with Ammeter, Voltmeter and Indicator etc. Item required for successful installation of P ump. Make: Indian make IS approved. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| EF-SUPP-N-KGP, SER | West Bengal | 14.00 Set |
| Total | 14 Set | |
5 wire type single phase preventer similar to Model- Minilec VSP3 having healthy indication. Make: Indian make IS approved. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| EF-SUPP-N-KGP, SER | West Bengal | 25.00 Numbers |
| Total | 25 Numbers | |
Single Phase, 1.5 HP/ 1.10 KW submersible pump set, suitable for bore size 100 mm, Yield - 0. 5 LPS, Delivery Size: 50 mm, Head: 60 Meter or above, operating voltage 1 ph. 230 V,50 Hz, with all necess ary items required for successful installation of pump, Pump should confirm to IS standard 8034/ 2002 lates t. Pump should be energy efficient, and star rated. Make: Indian make IS approved. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| EF-SUPP-N-KGP, SER | West Bengal | 5.00 Numbers |
| Total | 5 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5348336.pdf
ATTACHMENT
5348332.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .